English Datasheet

ExStik® Waterproof Fluoride Meter
Direct reading of Fluoride down to 0.1ppm
With Automatic Temperature Compensation (ATC)
• First Fluoride meter with built-in Automatic
Temperature Compensation
• Fastest response Fluoride meter (<1min)
• Easy use for Field or Laboratory fluoride testing
• Small sample/TISAB volume required for testing (10mL)
• In compliance with EPA Method 340.2.( Potentiometric Ion
Selective Electrode)
• Automatic electronic 1 or 2 point calibration
with offset adjustment
• Memory stores 25 labeled readings
• Waterproof to IP57
• Large LCD simultaneously displays ppm of Fluoride,
Temperature, and analog bargraph indicator
• Complete with electrode, TISAB reagent tablets, sensor
cap, four 3V button batteries, and 48" (1.2m) neckstrap
Contact Extech or your local lab supply for Fluoride calibration standards
Flat Surface Fluoride electrode with
built-in Automatic Temperature
Compensation (ATC)
• Public Water Fluoridation Control — Fluoride is
known to help prevent tooth decay while too much
fluoride is known to be bad for the teeth
• The concentration recommended by the American
Dental Association is 0.7-1.2 ppm.
• The MCL established by the EPA is 4.0 ppm
• Fluoride is naturally occurring and in some areas in
the US the natural level exceeds 4.0 ppm
FL704 TISAB reagent tablets for FL700
Fluoride Meter (100 tablets)
CA895 Small case with belt loop for your
ExStik Meter
0.1 to 10ppm
32 to 140°F (0 to 60°C)
1.4x6.8x1.6" (36x173x41mm)
7.4oz (210g)
Max. Resolution
Basic Accuracy
±3% rdg
Ordering Information:
FL700 ............ExStik®II Waterproof Flouride Meter
FL705 ............Replacement Fluoride Electrode module for FL700
FL704 ............TISAB Reagent Tablets (100 tablets)
CA895 ............Small vinyl carrying case with belt loop
Specifications subject to change without notice.
9/25/08 - R1
Copyright © 2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.