System Configuration Guide NEC Express5800/53Xi Technical Specification NEC Express5800/53Xi NP8000-9011FP02/03/04/05/06 Model number Intel® Xeon® Processor E3-1275v3 (3.50GHz, 8MB Cache, Quad Core) Intel® Xeon® Processor E3-1225v3 (3.20GHz, 8MB Cache, Quad Core) 4th Generation Intel® Core™ i3 Processor 4330 (3.50GHz, 4MB Cache, Dual Core) Processor Intel® C226 DDR3-1600 (PC3-12800) SDRAM 4GB / 8GB Chipset Memory Internal HDD/SSD Type Mountable memory Maximum size Error detection/correction Number of slots Mountable HDD Maximum size Maximum mountable number Controller Internal graphics Chip type Mountable graphics card Network function Serial Display USB*03 Interface LAN Audio*03 Expansion bay PCI Express (x16) [Open] PCI Express (x4) [Open] 32 bit PCI slot [Open] Dimension (W x D x H) Weight (Maximum) Power Power consumption Headphone terminal×1 (Front), microphone terminal (Stereo)×2 (Front:1, Rear:1), Line-out (Dual-used for headphone)×1 (Rear), Line-in×1 (Rear) 2 slots [1] 1 slot (Flat type) [0] Internal 3.5 inch bay [Open] 5.25 inch bay [Open] Riser card Expansion slot*04 32GB*02 ECC 4 slots SATA HDD: 500GB / 1TB / 2TB (7,200rpm) SATA HDD: 4TB 2 SATA III/600 (LSI Embedded MegaRAID™: RAID-0/1 supported)*01 Intel® HD Graphics P4600 (Built-in in CPU) NVIDIA Quadro® K600 / NVIDIA Quadro® K2000 / NVIDIA Quadro® K4000 1000BASE-T / 100BASE-TX / 10BASE-T (Wake On LAN/PXE boot supported) x2 RS-232C D-sub 9 pin (16550A compatible)×1 (Rear) DP×2 (Rear), mini D-sub 15 pin×1 (Rear) (Triple monitor supported) USB 3.0 compliant×6 (Rear: 6), USB 2.0 compliant×2 (Front: 2) RJ-45×2 (Rear) At maximum configuration*05 (under heavy load) Temperature/humidity condition *06 Standard Option (N8006-1011) 1 slot [1] (Short size) PCI Express 3.0 supported 1 slot [1] (Mechanically x8, Short size) － PCI Express 2.0 supported 1 slot [1] (33MHz/5V, Short size) － 90×373×336 mm (Vertical mounting, stabilizers not included) 160×373×336 mm (Vertical mounting, stabilizers included) 336×373×97 mm (Horizontal mounting) Approx. 9.2 kg AC100/200V ±10%, 50/60Hz±3Hz 250VA/244W In operation: 10 - 35°C / 10 - 80% (No condensation) In storage: -10 - 55°C / 10 - 80% (No condensation) Windows® 8 Pro 64 bit *01 *07 Windows® 7 Professional (SP1) 32 bit *07 Windows® 7 Professional (SP1) 64 bit Supported OS Attached software EXPRESSBUILDER, NEC ESMPRO Manager, NEC ESMPRO Agent *1 There are some functional limitations for Windows® 8 Pro 64 bit model. (RAID function not supported, some option boards not supported (LAN board)) *2 When 4GB memory is installed in Windows 7 Professional, usable memory is approximately 3GB. *3 Not all the peripherals are guaranteed to run properly. *4 The depth of the mountable board is either within 312 mm (long size), 350 mm with the retainer, 173 mm (short size), or 167.6 mm (MD2). Also, the width of the mountable board is either within 111 mm (with no "Low-Profile" indication) or within 64 mm (with "Low-Profile" indication). *5 Power consumption of the server in the maximum configuration is measured. *6 When the server is stored at low or high temperature, the system clock may run significantly faster or slower. Use of a time server (NTP server) is recommended if high accuracy is required in the system clock. *7 When installing Windows 7 Professional manually in the onboard RAID configuration or optional RAID configuration, prepare your USB memory or choose Flash FDD [N8160-86]. System Configuration Guide NEC Express5800/53Xi Workstation Configuration NP8000-9011FP02 (Express5800/53Xi (E3-1275v3/MULTI)) CPU Intel® Xeon® Processor E3-1275v3 (3.50 GHz, 8MB Cache, 4-core) MEM less HDD less ODD DVD Super MULTI Riser PCI Express x16, PCI Express x4 GA CPU Integrated GA NP8000-9011FP03 (Express5800/53Xi (E3-1225v3/DVD)) CPU Intel® Xeon® Processor E3-1225v3 (3.20 GHz, 8MB Cache, 4-core) MEM less HDD less ODD DVD ROM Riser PCI Express x16, PCI Express x4 GA CPU Integrated GA NP8000-9011FP04 (Express5800/53Xi (E3-1225v3/MULTI)) CPU Intel® Xeon® Processor E3-1225v3 (3.20 GHz, 8MB Cache, 4-core) MEM less HDD less ODD DVD Super MULTI Riser PCI Express x16, PCI Express x4 GA CPU Integrated GA NP8000-9011FP05 (Express5800/53Xi (Ci3-4330/DVD)) CPU Intel® Core i3-4330 (3.50 GHz, 4MB Cache, 2-core) MEM less HDD less ODD DVD ROM Riser PCI Express x16, PCI Express x4 GA CPU Integrated GA NP8000-9011FP06 (Express5800/53Xi (Ci3-4330/MULTI)) CPU Intel® Core i3-4330 (3.50 GHz, 4MB Cache, 2-core) MEM less HDD less ODD DVD Super MULTI Riser PCI Express x16, PCI Express x4 GA CPU Integrated GA Note on purchase The models stated above do not include memory, HDD, keyboard and mouse, which are required components for a workstation. Select your desired components from the lists. Note on configuration Windows 8 Pro system has limitations such as on-board RAID and certain optional board not supported. System Configuration Guide NEC Express5800/53Xi CPU One processor comes standard with this workstation. Configuration CPU socket Product list x1 NP8000-9011FP02 Intel® Xeon® Processor E3-1275v3 (3.50 GHz, 8MB Cache, 4-core, Built-in graphics (HD Graphics P4600) NP8000-9011FP03 NP8000-9011FP04 Intel® Xeon® Processor E3-1225v3 (3.20 GHz, 8MB Cache, 4-core), Built-in graphics (HD Graphics P4600) NP8000-9011FP05 NP8000-9011FP06 4th Generation Intel Core i3 Processor 4330 (3.50 GHz, 4MB Cache, 2-core), Built-in graphics (HD Graphics P4600) Memory board Up to four memory boards can be installed in this workstation. Select your desired memories from the list. Configuration Memory slot x4 Product list N8002-178 8GB Memory Board 8GB x1, DDR3-1600 SDRAM Unbuffered, ECC memory N8002-177 4GB Memory Board 4GB x1, DDR3-1600 SDRAM Unbuffered, ECC memory Note on configuration Two identical memories in pair installed in a workstation works as two-way interleaved memory. System Configuration Guide NEC Express5800/53Xi Hard disk drive (HDD) Up to two SATA HDDs can be installed in this workstation. Select a configuration below and your desired HDDs from the list. SATA HDD on-board connection SATA disk drive is connected individually or through on-board RAID connection (RAID 0/1). Configuration SATA connector Standard SATA cable for 1st disk drive 1st HDD x2 K410-311(00) SATA cable 30cm-cable for additional SATA HDD. Straight connector. 2nd HDD Product list N8050-220 N8050-219 N8050-218 2TB HDD 1TB HDD 500GB HDD SATA III/600, 7200 rpm, 3.5-inch SATA III/600, 7200 rpm, 3.5-inch SATA III/600, 7200 rpm, 3.5-inch Note on purchase - A SATA cable comes with this workstation for connecting one HDD. With 2 or more HDDs, the designated SATA cables should be selected. - On-board RAID is not supported for Windows 8 Pro system. - To configure RAID pack, select the same HDDs. Note on configuration See the end of this guide for HDD configurations supported by your operating systems. Optical disk drive One optical disk drive comes standard with this workstation. Configuration SATA connector x1 Product list NP8000-9011FP02 NP8000-9011FP04 NP8000-9011FP06 NP8000-9011FP03 NP8000-9011FP05 DVD Super Multi Drive as standard DVD-ROM Drive as standard System Configuration Guide NEC Express5800/53Xi Keyboard One keyboard can be connected to this workstation. Configuration USB connector Product list N8170-25 104 Keyboard USB, English x6 (Rear) x2 (Front) Mouse One mouse can be connected to this workstation. Select your desired mouse from the list. Configuration USB connector Product list (USB interface) x6 (Rear) x2 (Front) N8052-06 N8170-22 USB 2-Button Optical Wheel Mouse Mouse 2 button optical wheel mouse. USB connection. 2 button optical wheel mouse. USB connection. Riser card PCI slots (PCI Express (x16) and PCI Express (x4)) come standard with this workstation. By replacing the riser card, the PCI slots can be changed to PCI Express (x16) and PCI (32bit). Configuration Riser card connector Product list x1 Optional N8006-1011 Standard - Riser Card (PCI) Riser Card (PCIe4) Riser card for PCI Express (x16) and PCI (32bit). Riser card for PCI Express (x16) and PCI Express (x4). System Configuration Guide NEC Express5800/53Xi Graphics With built-in graphics processor installed, on-board graphics become available as a standard. By installing graphics accelerator, a greater features become available. Select your desired graphics accelerator from the list. Configuration Display connector (DP) x2 N8005-1004 DP-DVI conversion connector A cable to convert DP output to DVI-D (single-link) output. Display (one or two) Display connector (analog RGB) x1 Riser card connector x1 Display (one) Riser card (PCI Express (x16)) Product list N8005-114 N8005-113 N8005-112 Graphics Accelerator (NVIDIA NVIDIA Quadro® K4000 (3GB GDDR5) with DVIQuadro K4000) VGA conversion connector x1 Graphics Accelerator (NVIDIA NVIDIA Quadro® K2000 (2GB GDDR5) with DVIQuadro K2000) VGA conversion connector x1 Graphics Accelerator (NVIDIA NVIDIA Quadro® K600 (1GB GDDR3) with DVI-I Quadro K600) interface (dual-link support) x1, DP x1 with DVIVGA conversion connector x1 Display (from one to three) Additional product list N8005-1001 DVI-VGA Conversion Connector N8005-1004 Internal power connector x1 DP-DVI Conversion Connector A connector to convert DVI-I output to VGA (15pin mini D-sub) output. A cable to convert DP output to DVI-D (singlelink) output. K410-312(00) Power Branch Cable 53Xi bifurcated cable supplies power to high-end graphics board. Graphics accelerator Note on purchase - With Quadro K4000/K2000/K600 installed, select additional DP-DVI conversion connector to connect two displays via DVI interface. Two displays with VGA interface cannot be connected. - With Quadro K4000 installed, select Power Branch Cable. System Configuration Guide NEC Express5800/53Xi Network (LAN) This workstation has two LAN connectors to connect to external network device. Teaming feature such as AFT/ALB is supported. By installing LAN board, a connecting port can be added. Select your desired LAN board from the list. Configuration LAN connector X2 Riser card connector X1 Connect to a network device. Raiser card Product list N8104-121 N8104-126 1000BASE-T (2ch) 1000BASE-T PCI Express (x4), Full height, short length PCI Express (x1), Low profile/full height, short length Connect to a network device Note on purchase - Optional LAN board is not supported for Windows 8 Pro system. - When standard riser card is used with graphics accelerator, LAN board cannot be selected for slot (x16). Note on configuration When AMT is set to enable, the teaming feature is disabled. System Configuration Guide NEC Express5800/53Xi Serial device This workstation has one serial port to connect to external serial device. Configuration Serial port connector Connect to serial device x1 Note on configuration The serial port in this workstation is only for connecting serial device. A dedicated or public line cannot be connected. Other optional expansion Configuration External FDD N8160-86 Flash FDD External USB connection. 1.44MB flash memory to emulate FDD. Unable to concurrently connect two FDDs. Connection to the workstation is exclusively limited to one FDD when another FDD is connected. Note on purchase To install on-board RAID configuration, prepare your own USB memory, or select Flash FDD [N8160-86]. PCI slots supported by optional products To add PCI board to this workstation, installation location varies depending on the PCI board type. Refer the below table and select a required PCI board. Optional N8006-1011 Standard riser card Slot Slot PCI #1 Product Code Description PCI #2 PCI #2 Type PCI Express PCI Express PCI Slot spec. x16 x16 32bit/33Mhz/5V Slot size PCI Express x4 (x8 mechanical) Full Height PCI #1 Full Height Short length Short length Board size Remarks N8005-114 Graphics Accelerator O - O - Quadro K4000, bifurcated power cable [K410-312(00)] required, Windows 8 not supported N8005-113 Graphics Accelerator O - O - Quadro K2000 N8005-112 Graphics Accelerator O - O - Quadro K600 N8104-121 1000BASE-T (2ch) O *1 X O *1 - N8104-126 1000BASE-T O *1 X O *1 - Windows 8 not supported *1 PCI Express (x16) slot can be used only when graphics accelerator is not installed. X: Supported (recommended position), O: Supported, -: Not supported Supported HDD configurations When HDD is connected to this workstation, configuration supported varies depending on the connected HDD. Refer the below table and select required HDD configuration. RAID support # of HDD devices 1 unit 2 units O : Supported ‐ : Not supported Pack 1 RAID config HDD Non RAID 1 RAID 0 1 Non RAID 2 RAID 1 2 RAID 0 2 RAID 0 1 Pack 2 RAID config HDD RAID 0 1 53Xi SATA Onboard O ‐ O O O O