S SERIES Thin Film Resistor Network Isolated and Bussed Circuits RoHS compliant available FEATURES Precision Nichrome Resistors on Silicon Industry Standard Packaging JEDEC 95 Ratio Tolerances < ±0.05% TCR Tracking Tolerances < ±5 ppm/°C SCHEMATICS ELECTRICAL1 2 Standard Resistance Range, Ohms 1K to 100K (Isolated) 1K to 30K (Bussed) Resistor Tolerances ±0.1% Ratio Tolerances ±0.05% TCR Reference TCR table Operating Temperature Range -55°C to +125°C Interlead Capacitance <2pF Insulation Resistance ≥10,000 Megohms 100Vdc or √PR Maximum Operating Voltage Noise, Maximum (MIL-STD-202, Method 308) -25dB Resistor Power Rating at 70°C 1 Specifications subject to change without notice. 2 E24 codes available. 0.1 watts BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com August 25, 2006 page 1 of 3 BI technologies Nichrome on Silicon PACKAGE POWER, WATTS @ 70°C3 QSOP SOIC (Narrow) SOIC (Wide) P-DIP 16 20 24 8 14 16 16 20 24 8 14 16 0.75 1.0 1.0 0.4 0.7 0.8 1.0 1.2 1.2 0.4 0.6 0.8 POWER DERATING DERATING CURVE ENVIRONMENTAL (MIL(MIL-R-83401) Thermal Shock plus Power Conditioning ∆R 0.1% Short Time Overload ∆R 0.1% Terminal Strength ∆R 0.1% Moisture Resistance ∆R 0.1% Mechanical Shock ∆R 0.1% Vibration ∆R 0.1% Low Temperature Operation ∆R 0.05% High Temperature Exposure ∆R 0.1% Resistance to Solder Heat ∆R 0.1% Marking Permanency Per MIL-STD-202, Method 215 Flammability UL-94V-0 Rated Storage Temperature Range -55°C to +125°C MECHANICAL Lead Plating 80/20 Tin Lead (Standard) 100 matt Tin (RoHS) Lead Material Copper Alloy Lead Configuration Gull Wing Lead Coplanarity 0.004” (0.102 mm) Substrate Material Silicon Resistor Material Passivated Nichrome Body Material 3 Molded Epoxy Power per resistor @ 70°C, Maximum is 100 mW, not to exceed package power BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com August 25, 2006 page 2 of 3 BI technologies Nichrome on Silicon ORDERING INFORMATION4 S QS 16 A XXXX F S LF 13 Packaging Option: 7=7” Tape & Reel 13 = 13" Tape & Reel (No Code used for Tubes) Model Series: S = Passivated Nichrome on Silicon Package Type: Lead Finish: No Code=SnPb LF=Lead Free Lead Count: Circuit Type: A=Isolated B=Bussed TCR Code Tolerance Code Resistance Code PACKAGE TYPE 5 Package Codes Lead count Mechanical Outline QSOP QS 16,20, 24 MO-137 SOIC Narrow Body SN 8, 14, 16 MS-012 SOIC Wide Body SW 16 MS-013 P-DIP PD 8, 14, 16 MS-001 RESISTANCE6 First 3 digits are significant. Fourth digit denotes number of trailing zeros. For values less than 100, use “R” to denote a decimal point. Example, 51 and 10000 ohms is coded as 51R0 and 1002 respectively. RESISTANCE TOLERAN TOLERANCE CE5 Accuracy Code at 25°C A B D F G J Absolute Resistance Tolerances (%) ±0.1 ±0.1 ±0.5 ±1.0 ±2.0 ±5.0 Ratio Tolerances (R1 Ref) (%) ±0.05 ±0.1 ±0.1 ±1.0 N/A N/A TEMPERATURE COEFFICIENT COEFFICIENT OF RESISTANCE (TCR) (TCR)7 TCR Code (-55°C to 125°C) Q P S L Absolute (ppm/°C) ±25 ±50 ±100 ±200 Tracking (R1 Ref) (ppm/°C) ±5 ±5 N/A N/A 4 Contact customer service for custom designs and features. 5 JEDEC (Publication 95) Reference only. 6 Consult factory for custom resistance values. 7 Consult factory for custom tolerance values. BI Technologies Corporation 4200 Bonita Place Fullerton, CA 92835 USA Website: www.bitechnologies.com August 25, 2006 page 3 of 3 BI technologies