TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 1575.42MHz 2 MHz BW SMD 1.4X1.1 mm MODEL NO.:TA0714A REV. NO.:2 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 3V 3. Operating Temperature: -40°C to +85°C RoHS Compliant Lead free Lead-free soldering 4. Storage Temperature: -55°C to +95°C B. ELECTRICAL CHARACTERISTICS: Terminating source impedance : Terminating load impedance : Zs = 50 Ω ZL = 50 Ω Item Unit Center Frequency Max. Insertion Loss (1574.42~1576.42 MHz) Amplitude ripple (1574.42~1576.42 MHz) Fc MHz Min. - IL dB - 1.1 1.6 - dB - 0.1 0.5 - - 1.3 1.9 - VSWR (1574.42~1576.42 MHz) Type. Max. Note 1575.42 - Attenuation 100~960 MHz dB 25 27.5 - - 960~1460 MHz dB 25 28 - - 1460~1513 MHz dB 25 28 - - 1648~1710 MHz dB 15 19 - - 1710~1990 MHz dB 20 24 - - 1990~2300 MHz dB 25 31 - - 2300~4000 MHz dB 25 30 - - 4000~6000 MHz dB 20 24 - - TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. OUTLINE DRAWING: top view G bottom view □ C : Input A : Output B,D,E : Ground Unit : mm side view □ : Year/Month Code (Follow the table) YEAR/Month 1 2 3 4 2013 A B C D 2014 N P Q R 2015 a b c d 2016 n p q r 2017 A B C D 2018 N P Q R 2019 a b c d 2020 n p q r 5 E S e s E S e s 6 F T f t F T f t 7 G U g u G U g u 8 H V h v H V h v 9 J W j w J W j w 10 K X k x K X k x 11 L Y l y L Y l y 12 M Z m z M Z m z D. MEASUREMENT CIRCUIT: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 E. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Reflection Functions : S11 S22 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F. PACKING: 1. REEL DIMENSION (Reel Count : 7”=3000 ) 2.TAPE DIMENSION G□ Direction of Feed TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 G. RECOMMENDED REFLOW PROFILE : 1. 2. 3. 4. Preheating shall be fixed at 150~180℃ for 60~90 seconds. Ascending time to preheating temperature 150℃ shall be 30 seconds min. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec). Time : 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7