TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 2017.5MHz 15 MHz BW SMD 1.4X1.1 mm MODEL NO.:TA1126A REV. NO.:2 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 3V 3. Operating Temperature: -30°C to +85°C RoHS Compliant Lead free Lead-free soldering 4. Storage Temperature: -40°C to +95°C B. ELECTRICAL CHARACTERISTICS: Terminating source impedance (single-ended) : Terminating load impedance (single-ended) : Zs = 50 Ω ZL = 50 Ω Item Unit Min. - Type. 2017.5 dB - 1.3 2.1 - dB - 0.2 1 - - 1.2 1.9 - Center Frequency Fc MHz Insertion Loss (2010~2025 MHz) IL Amplitude ripple (2010~2025 MHz) VSWR (2010~2025 MHz) Max. Note - Attenuation 1~1020 MHz dB 26 29 - - 1220~1570 MHz dB 20 30 - - 1570~1590 MHz dB 30 32 - - 1590~1820 MHz dB 20 34 - - 1820~1850 MHz dB 31 36 - - 1850~1950 MHz dB 20 28 - - 2085~2400 MHz dB 19 27 - - 2400~2430 MHz dB 29 32 - - 2430~2790 MHz dB 25 32 - - 2790~2820 MHz dB 30 36 - - 2820~3000 MHz dB 25 38 - - 3000~4010 MHz dB 20 36 - - 4010~4060 MHz dB 25 35 - - 4060~6000 MHz dB 10 25 - - TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C.OUTLINE DRAWING: top view V □ bottom view side view C : Input A : Output B,D,E : Ground Unit : mm □ : Year/Month Code (Follow the table) YEAR/Month 1 2 3 4 2013 A B C D 2014 N P Q R 2015 a b c d 2016 n p q r 2017 A B C D 2018 N P Q R 2019 a b c d 2020 n p q r 5 E S e s E S e s 6 F T f t F T f t 7 G U g u G U g u 8 H V h v H V h v 9 J W j w J W j w 10 K X k x K X k x 11 L Y l y L Y l y 12 M Z m z M Z m z D. MEASUREMENT CIRCUIT: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 E. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F. PACKING: 1. REEL DIMENSION (Reel Count : 7”=3000 ) 2.TAPE DIMENSION V □ Direction of Feed TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 G. RECOMMENDED REFLOW PROFILE : 1. 2. 3. 4. Preheating shall be fixed at 150~180℃ for 60~90 seconds. Ascending time to preheating temperature 150℃ shall be 30 seconds min. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec). Time : 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7