TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: 175.075 MHz 15kHz BW SMD 7.0 x 5.0 mm SAW IF Filter TST Parts No.: TB1210A Customer Parts No.: Customer signature required Company: Division: Approved by : Date: Checked by: Kazuma Lee Approval by: Bob Chau Date: 12 / 16 / 2015 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com IF SAW Filter 175.075MHz SMD 7.0X5.0mm MODEL NO.: TB1210A REV. NO.1 A. MAXIMUM RATING: 1. Operating temperature range: -10°C to 75°C 2. Storage temperature range: -40°C to 85°C 3. Input Power Level : 10 dBm 4. Maximum DC Voltage : 10V RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device B. ELECTRONIC CHARACTERISTICS: Item Unit MHz Min. - Type. 175.075 Max. - Insertion Loss, IL at 25 C dB - 2.8 4.2 Insertion Loss, IL at -10°C to 75°C dB - 2.8 4.6 Passband Ripple Fc+/- 7.5kHz at -10°C to 75°C dB - 0.2 ±0.7 dB 55 60 - Fc+/-100kHz at 25 C dB 10 18 - Fc+/-100kHz at -10°C to 75°C dB 7 18 - ppm/°C - -0.036 - Source Impedance Ohm - 50 - Load Impedance Ohm - 50 - Center frequency, Fc o Attenuation:(Reference level from Min IL) Fc+/-1MHz o Temperature Coefficient 2 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 2 - C. FREQUENCY CHARACTERISTICS: 1. Wide band Response 2. Pass Band Response and Group Time Delay Response: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - (1) Smith Chart: D. OUTLINE DRAWING: 1210 T △ □ #I : Input #J : Input Ground #D : Output #E : Output Ground #A,B,C,F,G,H : Ground □: Week Code Unit: mm △ : Product / Year Code TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - Product / Year Code Year 2013 2017 2014 2018 2015 2019 2016 2020 Product Code B b B b Week Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z E. MATCHING CIRCUIT: L1=180nH L2=180nH C1=1pF C2=1pF . TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - F. PCB FOOTPRINT: G. PACKING: 1. REEL DIMENSION (Please refer to FR-75D10 for packing quantity) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 - 2. TAPE DIMENSION 1210 Feed of direction H. RECOMMENDED REFLOW PROFILE: 1. Preheating shall be fixed at 150~180℃ for 60~90 seconds. 2. Ascending time to preheating temperature 150℃ shall be 30 seconds min. 3. Heating shall be fixed at 220℃ for 50~80 seconds and at 260℃+0/-5℃ peak (20~40sec). 4. Time: 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 7 -