TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: 169.4 MHz 0.2MHz BW SMD 5.0 x 5.0 mm SAW RF Filter TST Parts No.:TA1715A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Kazuma Lee Approval by: Bob Chau Date: 01 / 07 / 2014 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 169.4 MHz MODEL NO.:TA1715A REV. NO.1 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 6V 3. Operating Temperature: -40°C to +85°C RoHS Compliant Lead free Lead-free soldering Electrostatic Sensitive Device 4. Storage Temperature: -40°C to +85°C B. ELECTRICAL CHARACTERISTICS: Item Unit Min. Typ. Max. MHz - 169.4 - KHz - 500 - dB - 2.0 3.0 dB - 0.4 3.0 dB dB dB 30 15 30 44 20 37 - Source Impedance ohm Load Impedance ohm *1)： The matching circuit is real by actual passive components. 0805 Coillcraft CS series chip conductor is used for inductor. 0402 muRata GRM series is used for capacitor. 50 50 Center frequency Fc 3dB BW Minimum insertion loss Incl. loss of matching elements Passband (relative to ILmin ) *1) IL(min) *1) 169.3 ~ 169.5 MHz Attenuation (relative to ILmin ) *1) 10.00 ~165.00 MHz 170.6 ~175.00 175.0 ~1000.0 MHz MHz TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics : (1) Wide band Response: Fig1. Horizontal: 2MHz/Div Vertical: 10dB/Div (2) Pass band Response Response: Fig2. Horizontal: 0.1MHz/Div Vertical: 1dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 D. MEASUREMENT CIRCUIT: The matching circuit is real by actual passive components. L1=270nH L2=270nH E.OUTLINE DRAWING: 1715 △ □ #A：Input ground (recommended) or Input #B：Input (recommended) or Input ground #E：Output ground (recommended) or Output #F:：Output (recommended) or Output ground #C、#G: To be grounded #D、#H：Case Ground Δ：Product / Year Code □：Week Code Unit：mm Year 2013 2017 2021 2014 2018 2022 2015 2019 2023 2016 2020 2024 Year Code A a A a TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Week Code Table WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 WK13 A B C D E F G H I J K L M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z F. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. PACKING: 1. REEL DIMENSION: (Please refer to FR-75D10 for packing quantity) 2. TAPE DIMENSION: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7