TAI-SAW TECHNOLOGY CO., LTD. SMD 7.8x6.0 VCO MODEL NO.: TV0137A REV. NO.: 2.0 Revise: Rev. Rev. Page Rev. Account Date 1 2 N/A Page 3 Initial release Modify push spec for customer requirement 08/26/10’ N/A 07/09/13 ECN-201300272 TAI-SAW TECHNOLOGY CO., LTD. Ref. No. Revised by Tim Liu JieAn Huang TST DCC Release document 2 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SMD 7.8x6.0 VCO MODEL NO.: TV0137A REV. NO.:2.0 Description and Applications: RoHS Compliant Voltage Control Oscillator, SMD type, 7.8mmx6.0mm. Lead-free soldering Conditions: Parameter Symbol Limits typ. 4.5 max. 4.6 Units Supply Voltage Vcc min. 4.4 Control Voltage Range Vt 0.5 - 4.5 V Load Impedance - - 50 - Ohm Operating Temperature - -30 25 70 ℃ V Electrical Specifications: For different applications, the specification change is possible. Please contact TST sales representative or application engineer for your requirement. Limits Parameter ℃ Condition Units min. typ. max. Power Consumption 25±3 Operation Frequency Range Control Voltage Sensitivity Output Level C/N C/N C/N C/N C/N Pushing (ref Vcc=4.5V) 25±3 25±3 25±3 25±3 25±3 25±3 25±3 25±3 25±3 Pulling 25±3 Harmonics (2fo, 3fo) Harmonics (4fo) Non-harmonic spurious 25±3 25±3 25±3 - - 760 28 -14 25 KHz offset 50 KHz offset 100 KHz offset 500 KHz offset 10 MHz offset Vcc=4.5+-0.1V -80 Vcc=4.5 800 VSWR=2.0 all phase -1.0 (ref:50Ohm) - 6.5 8 mA 35 - 870 43 -5 -112.5 -118.5 -124.5 -135 -148 +80 800 MHz MHz/V dBm dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz kHz/0.1V kHz/V - +1.0 MHz - -15 -30 -70 dBc dBc dBc Unless otherwise specified, the standard test conditions are as follow: Ambient temperature: 25+-3 deg.C Relative humidity: 40% to 70% TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Mechanical Dimensions (mm): A=7.8 B=6.0 C=1.7 D=6.0 E=4.2 F=2.4 G=5.5 H=1.1 I=2.2 Pin #1= RF OUT Pin #2= Vcc Pin #3= Vcont (Vt) Pin #4= GND Pin #5= GND Pin #6= GND Marking: Line 1= 0137 (TST P/N) Line 2= TST Logo + VCO Product Code + Date Code+ Traceabulity Code Product Code Table: Date Code Table: WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 A B C D E F G H I J K L WK13 M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Tape & Reel & Orientation: 7.8x6.0mm Package Carrier Tape I. Tape Width: 16 mm Tape Pitch (part to part): 12 mm Reel Diameter 320.2 mm (13 inches) Quantity per reel 2000 Tape Dimensions(mm): Direction of Feed TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 II. Reel Dimensions (mm): [NOTE] 1. UNIT : MM. 2. UNLESS OTHERWISE SPECIFIED TOLERANCE ON DIM. +/-0.1MM. 3. MATERIAL : CONDUCTIVE POLYSTYRENE. 4. COLOR : BLOCK. 5. 10 PITCHES CUMULATIVE TOLERANCE +/-0.2MM. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7