UNISONIC TECHNOLOGIES CO., LTD U74AHC3G04 CMOS IC INVERTER DESCRIPTION SOP-8 The U74AHC3G04 are high-speed Si-gate CMOS devices providing three inverting buffers with the function Y A . FEATURES TSSOP-8 * Low Power Dissipation * Symmetrical Output Impedance * Balanced Propagation Delays * High Noise Immunity MSOP-8 ORDERING INFORMATION Ordering Number U74AHC3G04G-P08-R U74AHC3G04G-S08-R U74AHC3G04G-SM1-R Package TSSOP-8 SOP-8 MSOP-8 Packing Tape Reel Tape Reel Tape Reel MARKING SOP-8 / MSOP-8 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd TSSOP-8 1 of 5 QW-R502-544.C U74AHC3G04 PIN CONFIGURATION 1A 1 8 3Y 2 7 1Y 2A 3 6 3A GND 4 5 2Y VCC FUNCTION TABLE (each gate) INPUT(A) L H CMOS IC OUTPUT(Y) H L LOGIC DIAGRAM (each gate) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R502-544.C U74AHC3G04 CMOS IC ABSOLUTE MAXIMUM RATING (TA = 25°C, unless otherwise specified) PARAMETER SYMBOL CONDITIONS RATINGS UNIT Supply Voltage VCC -0.5 ~ 7.0 V Input Voltage VIN -0.5 ~ 7.0 V Output Voltage VOUT -0.5 ~ VCC +0.5 V VCC or GND Current ICC ±75 mA Output Current IOUT -0.5V < VOUT < VCC +0.5V ±25 mA Input Clamp Current IIK VIN < -0.5V -20 mA Output Clamp Current IOK VOUT < -0.5V or VOUT > + 0.5V ±20 mA Operating Temperature TOPR -40 ~ + 85 °C Storage Temperature TSTG -65 ~ + 150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage Input Voltage Output Voltage Operating Temperature SYMBOL VCC VIN VOUT TA Input Rise or Fall Times tR, tF CONDITIONS MIN 2.0 0 0 -40 TYP 5.0 VCC = 3.3 ± 0.3V VCC = 5.0 ± 0.5V MAX 5.5 5.5 VCC 85 100 20 UNIT V V V °C MAX UNIT ns/V ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) PARAMETER High-Level input voltage Low-Level input voltage High-Level Output Voltage Low-Level Output Voltage Input Leakage Current Quiescent Supply Current Input Capacitance SYMBOL VIH VIL VOH VOL II(LEAK) ICC CIN TEST CONDITIONS VCC=2.0V VCC=3.0V VCC=5.5V VCC=2.0V VCC=3.0V VCC=5.5V VCC=2.0V, VIN=VIH or VIL, IOH=-50μA VCC=3.0V, VIN=VIH or VIL, IOH=-50μA VCC=4.5V, VIN=VIH or VIL, IOH=-50μA VCC=3.0V, VIN=VIH or VIL, IOH=-4.0mA VCC=4.5V, VIN=VIH or VIL, IOH=-8.0mA VCC=2.0V, VIN=VIH or VIL, IOH=50μA VCC=3.0V, VIN=VIH or VIL, IOH=50μA VCC=4.5V, VIN=VIH or VIL, IOH=50μA VCC=3.0V, VIN=VIH or VIL, IOH=4.0mA VCC=4.5V, VIN=VIH or VIL, IOH=8.0mA VCC=5.5V, VIN=VCC or GND VCC=5.5V, VIN=VCC or GND, IOUT=0 VIN=VCC or GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.5 2.1 3.85 TYP V 0.5 0.9 1.65 1.9 2.9 4.4 V 2.0 3.0 4.5 V 2.58 3.94 0.1 0.1 0.1 0.36 V 0.36 1.5 0.1 10 10 μA μA pF 3 of 5 QW-R502-544.C U74AHC3G04 SWITCHING CHARACTERISTICS (tR = tF ≤ 3.0 ns, TA = 25°C) PARAMETER Propagation delay from input (A) to output(Y) CMOS IC SYMBOL tPLH / tPHL TEST CONDITIONS VCC=3.0 ~ 3.6V VCC=3.3V CL=15pF VCC=4.5 ~ 5.5V VCC=5V VCC=3.0 ~ 3.6V VCC=3.3V CL=50pF VCC=4.5 ~ 5.5V VCC=5V MIN TYP MAX 7.1 4.3 5.5 3.1 10.6 6.1 4.5 7.5 - UNIT ns ns ns ns ns ns ns ns OPERATING CHARACTERISTICS (TA =25°C , unless otherwise specified) PARAMETER Power Dissipation Capacitance SYMBOL TEST CONDITIONS CPD CL=50pF, f=1MHz, VIN=GND or VCC UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 9 MAX UNIT pF 4 of 5 QW-R502-544.C U74AHC3G04 CMOS IC TEST CIRCUIT AND WAVEFORMS VI INPUT REQUIREMENTS VM INPUT VM OUTPUT GND to VCC 50%VCC 50%VCC VIN Input VM VM 0V tPHL tPLH VOH Output VM VM VOL tPHL tPLH VOH Output VM VM VOL Note: CL includes probe and jig capacitance. PRR ≤1MHz, ZO = 50Ω, tR ≤3ns, tF ≤3ns. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R502-544.C