!LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LED SMD Pb Lead-Free Parts LG-008DUYS-CT-L1-A01 DATA SHEET DOC. NO : QW0905-LG-008DUYS-CT-L1-A01 REV. : D DATE : 06 - Dec. - 2012 發行 立碁電子 DCC !LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/11 PART NO. LG-008DUYS-CT-L1-A01 Features: 1. Side view Yellow LED. 2. White SMT package. 3. Leadframe package with individual 2 pin. 4.Wide viewing angle. 5.Soldering methods:IR reflow soldering. 6.Feature of the device:more light due to higher optical efficiency;extremely wide viewing angle;ideal for backlighting and coupling in light guide. 7.Pb free Applications: 1. LCD back light. 2. Mobile phones. 3. Indicators. 4. Switch lights. Device Selection Guide: PART NO LG-008DUYS-CT-L1-A01 MATERIAL AlGaInP COLOR Emitted Lens Red Water Clear !LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/11 PART NO. LG-008DUYS-CT-L1-A01 Package Dimensions 2.5 1.20 0.8 0.55 2.8 0.73 1.20 0.63 0.65 Andoe Cathode 0.43 Polarity Note : 1.All dimension are in millimeter tolerance is ̈́0.1mm unless otherwise noted. 2.Specifications are subject to change without notice. Recommended Soldering Pad Dimensions 1.4 1 0.9 Note : The tolerances unless mentioned is ̈́0.1mm,Anglë́0.5. Unit=mm. 1.4 !LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/11 PART NO. LG-008DUYS-CT-L1-A01 Absolute Maximum Ratings at Ta=25к Symbol Ratings UNIT Power Dissipation PD 78 mW Peak Forward Current Duty 1/10@10KHz IFP 60 mA Forward Current IF 30 mA Reverse Current @5V Ir 10 ȝA Electrostatic Discharge ESD 2000 V Operating Temperature Topr -40 ~ +85 к Storage Temperature Tstg -40 ~ +90 к Soldering Temperature Tsol Parameter Max 260к for 5 sec Max Typical Electrical & Optical Characteristics (Ta=25к) Symbol Min. Typ. Luminous Intensity Iv 590 800 ---- mcd IF=20mA Dominant Wavelength ȜD 585 590 592 nm IF=20mA Ϧӳ ---- 36 ---- nm IF=20mA VF 1.9 ---- 2.5 V IF=20mA 2ș 1/2 ---- 115 ---- deg IF=20mA Items Spectral Line Half-Width Forward Voltage Viewing Angle Max. UNIT Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±10% testing tolerance. CONDITION !LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LG-008DUYS-CT-L1-A01 Page 4/11 Luminous Intensity Classification BIN CODE U4 U5 U6 U7 U8 U9 U10 U11 U12 U13 U14 U15 U16 U17 U18 Iv(mcd) at 20mA Min. Max. 590 620 650 680 710 740 770 800 830 860 890 920 930 960 990 620 650 680 710 740 770 800 830 860 890 920 930 960 990 1020 Dominant Wavelength Classification BIN CODE 15 16 17 ȜD(nm) at 20mA Min. Max. 585 587 589 587 589 592 Forward Voltage Classification BIN CODE 1 2 3 4 5 6 Vf(v) at 20mA Min. Max. 1.9 2.0 2.0 2.1 2.2 2.3 2.4 2.5 2.1 2.2 2.3 2.4 !LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 5/11 PART NO. LG-008DUYS-CT-L1-A01 Typical Electro-Optical Characteristics Curve DUYS CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 0.1 2.5 2.0 1.5 1.0 0.5 0 2.0 1.0 3.0 4.0 5.0 1.0 Fig.4 Relative Intensity vs. Temperature 1.2 Relative Intensity @20mA Normalize @25к Forward Voltage@20mA Normaliz @25к Fig.3 Forward Voltage vs. Temperature 1.1 1.0 0.9 0.8 -20 0 20 40 60 80 100 Relative Intensity @20mA Fig.5 Relative Intensity vs. Wavelength 1.0 0.5 0 550 600 Wavelength (nm) 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 Ambient Temperature( к) Ambient Temperature( к) 500 1000 Forward Current(mA) Forward Voltage(V) -40 100 10 650 Fig.6 Directive Radiation 100 !LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 6/11 PART NO. LG-008DUYS-CT-L1-A01 Carrier Type Dimensions 4.0±0.2 1.5 0.23 Cathode 1.75 3.5 8.0±0.3 5.3 Andoe 3.05 1.35 2.0 Polarity 0.95 4.0±0.2 Note : The tolerances unless mentioned is ̈́0.1mm,Angle ̈́ʳ0.5. Unit=mm. Θ Packing Specifications Label Part No. LG-008DUYS-CT-L1-A01 Aluminum Moist-Proof bag Label Description Quantity/Reel 8.0mm tape,7"reel 3000 devices !LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/11 PART NO. LG-008DUYS-CT-L1-A01 Label Explanation LIGITEK ELECTRONICS CO., LTD. Pb !QBSU!; ! MH.119EVZT.DU.M2.B12 BIN : Luminous Intensity !MPU!; ! HT2.191279 HUE : Dominant Wavelength !RUZ)QDT*;! 4111 !CJO0IVF!;! V6028 ! WG;3/1.3/2 VF : Forward Voltage Reel Dimensions 0.2 0.4 0.8 0.8 0.6 0.2 0.4 0.6 2.0̈́0.5 178̈́1.5 6.0̈́1.0 9.0̈́1.0 ӿ13.5̈́1.0 12.0̈́1.0 !LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 8/11 PART NO. LG-008DUYS-CT-L1-A01 Box Explanation 1. 5 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm H W L 3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm L W H !LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 9/11 PART NO. LG-008DUYS-CT-L1-A01 Recommended Soldering Conditions 1. Hand Solder Basic spec is Љ 280к 3 sec one time only. 2. Wave Solder Soldering heat Max. 260 к 245̈́5кʳwithin 5 sec 120 ~ 150к Preheat 120 ~ 180 sec 3 PB-Free Reflow Solder 1~5°C/sec Preheat 180~200°C 1~5°C/sec 260°C MaX. 10sec.Max 6°C/sec Above 220°C 60 sec.Max. 120 sec.Max. Note: 1.Reflow soldering should not be done more than two times. 2.When soldering,do not put stress on the LEDs during heating. 3.After soldering,do not warp the circuit board. !LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 10/11 PART NO. LG-008DUYS-CT-L1-A01 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 к~35к,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 к ~ 35к,RH60%, they should be treated at 60 к±5 кfo r 15hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forward current should not be allowed to change by more than 40% of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. !LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 11/11 PART NO. LG-008DUYS-CT-L1-A01 Reliability Test: (1)Test items and results Test Item Classification Test Condition Sample Size Operating Life Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs 22 High Temperature Storage Test 1.Ta=105 к± 5к 2.t= 1000 hrs 22 Low Temperature Storage Test 1.Ta=-40 к²5к 2.t=1000 hrs 22 High Temperature High Humidity Storage Test 1.IR-Reflow In-Board, 2 Times 2.Ta= 60к± 5к 3.RH=90 %~95 % 4.t= 1000 hrs±2hrs 22 1.IR-Reflow In-Board,2 times 2.Ta=105 к ±5к & -40 к± 5к ( 30min) (30min) 3.total 100 cycles 22 1.T.Sol=260 к̈́5к 2.Dwell Time= 10 Max. 22 1.105 к ~ 25к ~ - 40к 30mins 15mins 30mins 2.10 0 Cyeles 22 Endurance Test Thermal Shock Test Environmental Test Reflow Soldering Test Temperature Cycling (2)Criteria for judging the damage Criteria for Judgement Item Symbol Test Conditions Min. Max. Forward Voltage Vf If=20mA - U.S.L x1.2 Reverse Current Ir Vr=5V - U.S.L x2.0 Luminous Intensity Iv If=20mA L.S.L x 0.5 - Note: 1.U.S.L.:Upper Standard Level. 2.L.S.L.:Lower Standard Level.