ILC-0402 Vishay Dale Surface Mount, Multi Layer High Frequency Ceramic Inductors FEATURES • • • • High reliability Surface mountable Reflow or wave solderable Tape and reel packaging per EIA specifications: 4000 pieces on 7" reel • Compliant to RoHS Directive 2002/95/EC • Halogen-free according to IEC 61249-2-21 definition MECHANICAL SPECIFICATIONS Solderability: 90 % coverage after 5 s dip in 235 °C solder following 60 s preheat at 120 °C and type R flux dip Resistance to Solder Heat: 10 s in 260 °C solder, after preheat and flux above Terminal Strength: 0.2 kg (0.44 lbs) for 30 s Beam Strength: 0.2 kg (0.44 lbs) Flex: 0.0788" [2.0 mm] min. mounted on 0.063" [1.6 mm] thick PC board ENVIRONMENTAL SPECIFICATIONS Operating Temperature: - 55 °C to 125 °C Thermal Shock: 100 cycles, - 40 °C to + 85 °C Humidity: + 40 °C, 85 % RH, 1000 h at full rated current Load Life: 85 °C for 1000 h at full rated current STANDARD ELECTRICAL SPECIFICATIONS IND. (nH) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 PART NUMBER ILC0402ER1N0S ILC0402ER1N2S ILC0402ER1N5S ILC0402ER1N8S ILC0402ER2N2S ILC0402ER2N7S ILC0402ER3N3S ILC0402ER3N9S ILC0402ER4N7S ILC0402ER5N6S ILC0402ER6N8J ILC0402ER8N2J ILC0402ER10NJ ILC0402ER12NJ ILC0402ER15NJ ILC0402ER18NJ ILC0402ER22NJ ILC0402ER27NJ ILC0402ER33NJ ILC0402ER39NJ ILC0402ER47NJ ILC0402ER56NJ ILC0402ER68NJ ILC0402ER82NJ ILC0402ERR10J TOL. 0.3 nH 0.3 nH 0.3 nH 0.3 nH 0.3 nH 0.3 nH 0.3 nH 0.3 nH 0.3 nH 0.3 nH 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% TEST FREQUENCY (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Q TYPICAL Q MIN. 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 100 MHz 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 11 11 11 11 500 MHz 21 23 25 25 23 21 22 19 19 20 19 22 18 18 19 20 22 22 19 21 18 21 18 19 17 SRF (MHz) 1000 MHz 30 31 35 35 32 30 31 26 26 26 26 29 23 23 24 25 26 25 20 20 15 14 12 8 2 MIN. 10 000 10 000 6000 6000 6000 6000 6000 4000 4000 4000 3900 3600 3200 2700 2300 2100 1900 1600 1300 1200 1000 750 750 600 600 TYP. 18 000 17 000 11 000 11 000 8700 7800 6400 5800 5100 4700 4200 3800 3400 2900 2500 2400 2200 2000 1800 1600 1500 1200 1250 1100 1000 DCR MAX. () 0.12 0.12 0.13 0.14 0.16 0.17 0.19 0.22 0.24 0.27 0.32 0.37 0.42 0.50 0.55 0.65 0.80 0.90 1.00 1.20 1.30 1.40 1.40 2.00 2.00 RATED DC CURRENT MAX. (mA) 300 300 300 300 300 300 300 300 300 300 250 250 250 250 250 200 200 200 200 150 150 150 150 100 100 DIMENSIONS in inches [millimeters] Ceramic Body 0.02 ± 0.004 [0.5 ± 0.1] 0.02 ± 0.004 [0.5 ± 0.1] 0.01 ± 0.004 [0.25 ± 0.1] 0.04 ± 0.004 [1.0 ± 0.1] DESCRIPTION ILC-0402 MODEL 10 nH INDUCTANCE VALUE ± 10 % INDUCTANCE TOLERANCE ER PACKAGE CODE e3 JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I L C PRODUCT FAMILY Document Number: 34120 Revision: 18-Apr-11 0 4 0 SIZE 2 E R PACKAGE CODE For technical questions, contact: [email protected] 1 0 N INDUCTANCE VALUE K TOL. www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000