ILC-0805 Vishay Dale Surface Mount, Multilayer High Frequency Ceramic Inductors FEATURES • • • • MECHANICAL SPECIFICATIONS Solderability: 90 % coverage after 5 s dip in 235 °C solder following 60 s preheat at 120 °C and type R flux dip Resistance to Solder Heat: 10 s in 260 °C solder, after preheat and flux above Terminal Strength: 0.6 kg (1.32 lbs) for 30 s Termination: 100 % tin Beam Strength: 1.0 kg (2.20 lbs) Flex: 0.0788" [2.0 mm] min. mounted on 0.063" [1.6 mm] thick PC board High reliability Surface mountable Reflow or wave solderable Tape and reel packaging per EIA specifications: 4000 pieces on 7" reel • Compliant to RoHS Directive 2002/95/EC • Halogen-free according to IEC 61249-2-21 definition ENVIRONMENTAL SPECIFICATIONS Operating Temperature: - 55 °C to + 125 °C Thermal Shock: 100 cycles, - 40 °C to + 85 °C Humidity: + 40 °C, 85 % RH, 1000 h at full rated current Load Life: 85 °C for 1000 h at full rated current STANDARD ELECTRICAL SPECIFICATIONS PART NUMBER ILC0805ER1N5S ILC0805ER1N8S ILC0805ER2N2S ILC0805ER2N7S ILC0805ER3N3S ILC0805ER3N9S ILC0805ER4N7S ILC0805ER5N6S ILC0805ER6N8J ILC0805ER8N2J ILC0805ER10NJ ILC0805ER12NJ ILC0805ER15NJ ILC0805ER18NJ ILC0805ER22NJ ILC0805ER27NJ ILC0805ER33NJ ILC0805ER39NJ ILC0805ER47NJ ILC0805ER56NJ ILC0805ER68NJ ILC0805ER82NJ ILC0805ERR10J ILC0805ERR12J ILC0805ERR15J ILC0805ERR18J ILC0805ERR22J ILC0805ERR27J IND. (nH) 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 TOL. 0.3 nH 0.3 nH 0.3 nH 0.3 nH 0.3 nH 0.3 nH 0.3 nH 0.3 nH 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% TEST Q TYPICAL FREQ. Q THICKNESS “D” (MHz) MIN. 100 MHz 500 MHz 1000 MHz (INCHES [mm]) 0.035 ± 0.008 [0.90 ± 0.2] 100 10 16 43 67 0.035 ± 0.008 [0.90 ± 0.2] 100 10 16 56 59 0.035 ± 0.008 [0.90 ± 0.2] 100 10 16 40 58 0.035 ± 0.008 [0.90 ± 0.2] 100 12 16 43 60 0.035 ± 0.008 [0.90 ± 0.2] 100 12 19 52 70 0.035 ± 0.008 [0.90 ± 0.2] 100 12 19 52 75 0.035 ± 0.008 [0.90 ± 0.2] 100 12 19 53 70 0.035 ± 0.008 [0.90 ± 0.2] 100 15 19 53 70 0.035 ± 0.008 [0.90 ± 0.2] 100 15 19 44 60 0.035 ± 0.008 [0.90 ± 0.2] 100 15 19 45 60 0.035 ± 0.008 [0.90 ± 0.2] 100 15 20 53 60 0.035 ± 0.008 [0.90 ± 0.2] 100 15 20 36 45 0.035 ± 0.008 [0.90 ± 0.2] 100 15 20 46 45 0.035 ± 0.008 [0.90 ± 0.2] 100 15 20 52 45 0.035 ± 0.008 [0.90 ± 0.2] 100 18 20 40 31 0.035 ± 0.008 [0.90 ± 0.2] 100 18 20 44 29 0.035 ± 0.008 [0.90 ± 0.2] 100 18 20 36 15 0.035 ± 0.008 [0.90 ± 0.2] 100 18 20 36 12 0.035 ± 0.008 [0.90 ± 0.2] 100 18 21 33 12 0.035 ± 0.008 [0.90 ± 0.2] 100 18 21 31 9 0.035 ± 0.008 [0.90 ± 0.2] 100 18 21 30 0.035 ± 0.008 [0.90 ± 0.2] 100 18 22 26 0.035 ± 0.008 [0.90 ± 0.2] 100 18 22 22 0.035 ± 0.008 [0.90 ± 0.2] 50 13 22 17 0.035 ± 0.008 [0.90 ± 0.2] 50 13 22 9 0.035 ± 0.008 [0.90 ± 0.2] 50 13 21 8 0.035 ± 0.008 [0.90 ± 0.2] 50 12 20 4 0.035 ± 0.008 [0.90 ± 0.2] 50 12 24 17 - SRF (MHz) DCR RATED DC MAX. CURRENT MIN. TYP. () MAX. (mA) 4000 7000 0.10 300 4000 7000 0.10 300 4000 7000 0.10 300 4000 6500 0.10 300 4000 5500 0.13 300 3000 4400 0.15 300 3000 3500 0.20 300 3000 3500 0.23 300 2500 3300 0.25 300 2000 2600 0.28 300 3000 2300 0.30 300 1500 2000 0.35 300 1500 1800 0.40 300 1300 1700 0.45 300 1200 1400 0.50 300 1000 1300 0.55 300 1000 1200 0.60 300 800 1100 0.65 300 800 1000 0.70 300 700 900 0.75 300 600 800 0.80 300 500 700 0.90 300 500 700 0.90 300 400 600 0.95 300 300 600 1.00 300 300 500 1.10 300 300 500 1.20 300 200 400 1.30 300 DIMENSIONS in inches [millimeters] Ceramic Body 0.049 ± 0.008 [1.25 ± 0.2] D 0.079 ± 0.008 [2.0 ± 0.2] 0.020 ± 0.001 [0.50 ± 0.3] DESCRIPTION ILC-0805 MODEL 10 nH INDUCTANCE VALUE ± 10 % INDUCTANCE TOLERANCE ER PACKAGE CODE e3 JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I L PRODUCT FAMILY Document Number: 34162 Revision: 28-Feb-11 C 0 8 0 SIZE 5 E R PACKAGE CODE For technical questions, contact: [email protected] 1 0 N INDUCTANCE VALUE L TOL. www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000