PS-P600EA WinQCM WinQCM is a software package designed to control our QCM instruments, PC and to collect data. Mass changes in the nanogram range can be measured accurately. Main features ■Connection and simultaneously measurement the devices One PC can be connected with max. 8 channels of devices (QCM922A, QCM934, QCA922 and QCA917) ■Data points 10 to 1,080,000(12.5 days or less of one sampling interval second) ■Graph display of measurement data Resonance frequency, resonance resistance, temperature and voltage of analog inputs can be displayed in the graph. Setup Parameters ■Base Freq. Enter a start frequency for frequency sweep. ■Gate Time / Avg. Time Select the sampling interval of the QCM from the list. ■Sampling Time (Multiples of Gate Time) Select the time interval at which the PC takes data. ■Number of Sampling Input the data sampling frequency. ■Ext. Input Select the voltage ranges for external analog inputs from the list. System Requirements Item Description Machine supported IBM® PC/AT® compatible CPU Memory Intel® compatible CPU with 1 GHz or more Microsoft® Windows® 8.1/8/7/Vista (each 32bits/64bits) * For OSs of the 64-bit version, it operates in the 32-bit compatible mode 2GB or more Free HDD Space Free space of 1MB or more (except for .NET Framework and data save area) Display 1024 × 768 or higher resolution, True Color (32 bits, highest) or higher Disk Unit CD-ROM drive for software installation Others Microsoft® .NET Framework 4.0 or higher needed to be installed, USB2.0 port OS supported PS-P600EA WinQCM Specification Item Compatible QCM Communication I/F Number of connection channels Resonance frequency Resonance resistance Admittance index Functions Main Unit Control Sampling Interval Sampling interval Graphing Features File reading File retention Others Description QCM922A QCM934 QCM922 USB2.0 QCA917 GPIB 8 channels (max) 0.01 Hz 0.01 Ω 0.1 Hz 0.1 Ω No unit Measurement conditions settings, data collection, graphical representation, file retention/reading, data analysis, etc. Measurement start/pause/stop, measurement condition settings, etc. It is possible to select a mean or momentary value for a gate time base. Gate time Sampling interval 0.01 sec (10 ms) 0.01/ 0.1/ 0.2/ 0.5 sec * only QCM922A 0.02 sec (20 ms) 0.02/ 0.1/ 0.2/ 0.5 sec * only QCM922A 0.1 sec (100 ms) 0.1/ 0.2/ 0.5/ 1 sec 1 sec 1/ 2/ 5/ 10 sec 10 sec 10/ 20/ 30/ 60 sec 10 to 1,080,000 (12.5 days or less of one sampling interval second) · Data is graphically displayed in real time. · Up to 4 graphs from a single file or a single graph from 4 different files can be displayed on one screen. · Scaling and scrolling graphs · Hover box that displays the data values at the cursor position · Data can be displayed in line or dot format · Displays the amount of the change (Δ) from the arbitrary standard value · Displays the calculated results for the amount of change (Δ) between two arbitrary set points Can read either comma delimited ASCII files from WinQCM and WinEchem or binary files from WinEchem CSV format text file Copying the measured data and graphs to a clipboard, printing a graph, etc. *Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation, the U.S.A., in the U.S.A. and other countries. *The other company or product names in the text are the trademark or registered trademark of each company. The specification is subject to change without notice. Please be forewarned. SEIKO EG&G CO.,LTD. Grande Bldgs., 2-26-9, Hatchobori, Chuo-ku, Tokyo 104-0032, Japan TEL:(+81)3-5543-3106 FAX:(+81)3-5542-3109 http://www.sii.co.jp/segg July 2015 Rev. 1.0