Trimmer Potentiometers Packaging Methods (Taping) of SMT Trimmer Potentiometers Carrier Taping P2 T P0 Drow out F E f Do W ● Embossed Direction X Direction W The standard of insertion direction is X direction. (W direction is only for 4 mm Square Open.) P1 Type 2 mm Open Cermet 3 mm Open Taping W F 8 mm Taping 8 3.5 12 5.5 4 mm Open 12 mm Taping E 1.75 P1 4 P2 P0 0D0 T 2 4 1.5 0.6 max. B C D E 8 ● Reel E A W1 ±2 +2 0 max. min. ±0.2 ±0.8 ±0.5 0178 8.4 14.4 C Type A Taping D B 2 mm Open Cermet 3 mm Open 8 mm Taping W2 060 13 21 2 4 mm Open 12 mm Taping 0178 12.4 18.4 W1 W2 Packaging Methods of Ceramic Trimmer Potentiometers ● Taping Condition 2 max. 1. Lack of Products The start and end of Taping. Should have more than 5 pitch leader space. Middle portion. Should not continue 4 pieces. In case of the lead wire off, the length of lead wire protruded from the tape is maximum 2 mm after taping. 2. Pull Strength Products should not be separated from the tape at the pull strength of 4.9 N. (Direction A) Products should not be separated from the tape at the pull strength of 0.98 N. (Direction B) A 19 B Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Jul. 2014