NCS210 D

NCS210, NCS211, NCS212,
NCS213, NCS214, NCS215
Current-Shunt Monitor,
Voltage Output,
Bi-Directional Zero-Drift
www.onsemi.com
The NCS210, NCS211, NCS212, NCS213, NCS214, and NCS215
are voltage output current shunt monitors that can measure voltage
across shunts at common−mode voltages from −0.3 V to 26 V,
independent of supply voltage. Six fixed gains are available: 50 V/V,
75 V/V, 100 V/V, 200 V/V, 500 V/V, or 1000 V/V. The low offset of
the zero−drift architecture enables current sensing with maximum
drops across the shunt as low as 10 mV full−scale.
The devices can operate from a single +2.7 V to +26 V power
supply, drawing a maximum of 100 mA of supply current. All versions
are specified over the extended operating temperature range (–40°C to
+125°C). Available in SC−70 and thin UQFN space−saving packages.
PIN CONNECTIONS
1
GND
2
VS
3
•
Wide Common−Mode Input Range −0.3 V to 26 V
Supply Voltage Range from 2.7 V to 26 V
Low Offset Voltage ±60 mV Max
Low Offset Drift (0.1 mV/°C)
Low Gain Error (max 1%)
Rail−to−rail Input and Output Capability
Low Current Consumption (typ 65 mA, 100 mA max)
NCV Prefix for Automotive and Other Applications Requiring
Unique Site Qualified and PPAP Capable
These are Pb−free Devices
REF
8
GND
9
7
OUT 10
5
IN−
4
IN+
1
6
5
IN−
4
IN−
2
3
IN+
*NC IN+
*NC denotes no internal connection. These pins can be left floating or
connected to any voltage between Vs and GND.
MARKING DIAGRAMS
6
XXMG
G
1
XXX = Specific Device Code (See page 4)
M
= Date Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
Product
Gain
R3−R4
R1−R2
NCS213
NCS215
50
20 kW
1 MW
75
13.3 kW
1 MW
NCS214
100
10 kW
1 MW
NCS210
200
5 kW
1 MW
NCS211
500
2 kW
1 MW
NCS212
1000
1 kW
1 MW
V OUT + ǒI LOAD
This document contains information on some products that are still under development.
ON Semiconductor reserves the right to change or discontinue these products without
notice.
June, 2016 − Rev. 4
OUT
XXXMG
G
Current Sensing (High−Side/Low−Side)
Automotive
Telecom
Sensors
© Semiconductor Components Industries, LLC, 2016
6
*NC VS
Typical Applications
•
•
•
•
− +
REF
Features
•
•
•
•
•
•
•
•
1
UQFN10
MU SUFFIX
CASE 488AT
SC70−6
SQ SUFFIX
CASE 419B
1
R SHUNTǓGAIN ) V REF
ORDERING INFORMATION
See detailed ordering, marking and shipping information on
page 4 of this data sheet.
Publication Order Number:
NCS210/D
NCS210, NCS211, NCS212, NCS213, NCS214, NCS215
RSHUNT
Supply
Load
NCS21x
R1
R3
IN−
−
IN+
+
Output
OUT
Reference
Voltage
R4
REF
VS
GND
R2
+2.7 V to +26 V
0.01 mF
To
0.1 mF
Figure 1. Application Schematic
Table 1. MAXIMUM RATINGS
Rating
Supply Voltage (Note 1)
NCS21x
NCV21x
Analog Inputs
Symbol
Value
Unit
VS
+26
+28
V
−26 to +26
V
VIN+,VIN−
Differential (VIN+)−(VIN−)
Common−Mode (Note 2) NCS21x
NCV21x
GND−0.3 to +26
GND−0.3 to +28
REF Input
VREF
GND−0.3 to ( Vs) +0.3
Output (Note 2)
VOUT
GND−0.3 to ( Vs) +0.3
V
5
mA
Input Current into Any Pin (Note 2)
V
Maximum Junction Temperature
TJ(max)
+150
°C
Storage Temperature Range
TSTG
−65 to +150
°C
ESD Capability, Human Body Model (Note 3)
HBM
±3000
V
MM
±100
V
CDM
±1000
V
ESD Capability, Machine Model (Note 3)
Charged Device Model (Note 3)
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Refer to ELECTRICAL CHARACTERISTICS, RECOMMENDED OPERATING RANGES and/or APPLICATION INFORMATION for safe
operating parameters.
2. Input voltage at any pin may exceed the voltage shown if current at that pin is limited to 5 mA.
3. This device series incorporates ESD protection and is tested by the following methods
ESD Human Body Model tested per AEC−Q100−002 (EIA/JESD22−A114)
ESD Machine Model tested per AEC−Q100−003 (EIA/JESD22−A115)
ESD Charged Device Model tested per AEC−Q100−011.
Latchup Current Maximum Rating: 50 mA per JEDEC standard: JESD78
Table 2. THERMAL CHARACTERISTICS
Rating
Thermal Characteristics, SC70 (Note 4)
Thermal Resistance, Junction−to−Air (Note 5)
Symbol
Value
Unit
RqJA
250
°C/W
4. Refer to ELECTRICAL CHARACTERISTICS, RECOMMENDED OPERATING RANGES and/or APPLICATION INFORMATION for safe
operating parameters.
5. Values based on copper area of 645 mm2 (or 1 in2) of 1 oz copper thickness and FR4 PCB substrate.
www.onsemi.com
2
NCS210, NCS211, NCS212, NCS213, NCS214, NCS215
Table 3. RECOMMENDED OPERATING RANGES
Rating
Symbol
Min
Max
Unit
Supply Voltage
VS
2.7
26
V
Ambient Temperature
TA
−40
125
°C
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
Table 4. ELECTRICAL CHARACTERISTICS
Boldface limits apply over the specified temperature range, TA = −40°C to 125°C, guaranteed by characterization and/or design.
At TA = +25°C, VSENSE = VIN+ − VIN−.
NCS210, NCS213, NCS214 and NCS215: VS = +5 V, VIN+ = 12 V, and VREF = VS/2, unless otherwise noted.
NCS211 and NCS212: VS = +12 V, VIN+ = 12 V, and VREF = VS/2, unless otherwise noted.
Parameter
Test Conditions
Symbol
Min
Typ
Max
Unit
GAIN
NCS210
NCS211
NCS212
NCS213
NCS214
NCS215
Gain Error
G
200
500
1000
50
100
75
Ge
+0.2
+1
%
TA = −10°C to 125°C
7
14
ppm/°C
VSENSE = −5 mV to 5 mV
±0.01
%
No sustained oscillation
1
nF
VSENSE = −5 mV to 5 mV
Gain Error vs. Temperature
Nonlinearity Error
Maximum Capacitive Load
V/V
VOLTAGE OFFSET
Offset Voltage
(RTI Note 6)
NCS210,NCS211,
NCS212, NCS214,
NCS215
VSENSE = 0 mV
±0.55
±60
mV
±5
±100
mV
dV/dT
0.1
0.6
mV/°C
dV/dT
0.5
1.5
mV/°C
60
mA
26
V
VOS
NCS213
Offset Drift
NCS213
INPUT
Input Bias Current
VSENSE = 0 mV
Common−Mode Input Voltage Range
Common−Mode
Rejection Ratio
Common−Mode
Rejection Ratio
NCS210, NCS211,
NCS212, NCS214,
NCS215
NCS213
IIB
VCM
−0.3
CMRR
103
115
dB
VS = 3.3 V, VIN+ = 3 V to +26 V,
VSENSE = 0 mV
103
115
dB
VS = 3.3 V, VIN+ = 0 V to +26 V,
VSENSE = 0 mV (TA = −10°C to 85°C)
103
120
dB
97
110
dB
VS = 3.3 V, VIN+ = 3 V to +26 V,
VSENSE = 0 mV
97
110
dB
VS = 3.3 V, VIN+ = 0 V to +26 V,
VSENSE = 0 mV (TA = −10°C to 85°C)
97
115
dB
VS = 5 V, VIN+ = 2 V to +26 V,
VSENSE = 0 mV
VS = 5 V, VIN+ = 2 V to +26 V,
VSENSE = 0 mV
CMRR
OUTPUT
Output Voltage Low
Referenced from GND
RL = 10 kΩ to Ground
VOL
5
50
mV
Output Voltage High
Referenced from VS
RL = 10 kΩ to Ground
VOH
0.05
0.2
V
www.onsemi.com
3
NCS210, NCS211, NCS212, NCS213, NCS214, NCS215
Table 4. ELECTRICAL CHARACTERISTICS
Boldface limits apply over the specified temperature range, TA = −40°C to 125°C, guaranteed by characterization and/or design.
At TA = +25°C, VSENSE = VIN+ − VIN−.
NCS210, NCS213, NCS214 and NCS215: VS = +5 V, VIN+ = 12 V, and VREF = VS/2, unless otherwise noted.
NCS211 and NCS212: VS = +12 V, VIN+ = 12 V, and VREF = VS/2, unless otherwise noted.
Parameter
Test Conditions
Symbol
Min
Typ
Max
Unit
CLOAD = 10 pF, NCS210
CLOAD = 10 pF, NCS211
CLOAD = 10 pF, NCS212
CLOAD = 10 pF, NCS213
CLOAD = 10 pF, NCS214
CLOAD = 10 pF, NCS215
BW
40
25
10
100
60
50
kHz
SR
0.4
V/ms
en
35
nV/ǠHz
DYNAMIC PERFORMANCE
Bandwidth (f−3dB)
Slew Rate
NOISE
Spectral Density, 1 kHz (RTI Note 6)
POWER SUPPLY
Operating Voltage Range
VSENSE = 0 mV
Vs
Quiescent Current
VSENSE = 0 mV
IDD
PSRR
Quiescent Current over Temperature
Power Supply Rejection Ratio
2.7
26
V
65
100
mA
115
mA
±0.1
±10
mV/V
VSENSE = 0 mV
VS = +2.7 V to +26 V, VIN+ =18 V,
VSENSE = 0 mV
6. RTI = referenced−to−input.
ORDERING INFORMATION
Device
Gain
Marking
200
AAP
NCS211SQT2G
500
AAM
NCS212SQT2G (In Development)**
1000
AAN
NCS213SQT2G
50
AAQ
NCS214SQT2G
100
AAR
NCS215SQT2G (In Development)**
75
AAT
NCV210SQT2G * (In Development)**
200
AAP
NCV211SQT2G * (In Development)**
500
AAM
NCV212SQT2G * (In Development)**
1000
AAN
NCV213SQT2G * (In Development)**
50
AAQ
NCV214SQT2G * (In Development)**
100
AAR
NCS210SQT2G
NCV215SQT2G * (In Development)**
75
AAT
NCS210MUTAG (In Development)**
200
TBD
NCS211MUTAG (In Development)**
500
TBD
NCS212MUTAG (In Development)**
1000
TBD
NCS213MUTAG (In Development)**
50
TBD
NCS214MUTAG (In Development)**
100
TBD
NCS215MUTAG (In Development)**
75
TBD
Package
Shipping †
SC70−6
(Pb−Free)
3000 / Tape and Reel
UQFN10
(Pb−Free)
3000 / Tape and Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D
*NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP
Capable.
** Contact local sales office for availability.
www.onsemi.com
4
NCS210, NCS211, NCS212, NCS213, NCS214, NCS215
PACKAGE DIMENSIONS
SC−88/SC70−6/SOT−363
CASE 419B−02
ISSUE Y
2X
aaa H D
D
H
A
D
6
5
GAGE
PLANE
4
L
L2
E1
E
1
2
DETAIL A
3
aaa C
2X
bbb H D
2X 3 TIPS
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.20 PER END.
4. DIMENSIONS D AND E1 AT THE OUTERMOST EXTREMES OF
THE PLASTIC BODY AND DATUM H.
5. DATUMS A AND B ARE DETERMINED AT DATUM H.
6. DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE
LEAD BETWEEN 0.08 AND 0.15 FROM THE TIP.
7. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION.
ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 TOTAL IN
EXCESS OF DIMENSION b AT MAXIMUM MATERIAL CONDITION. THE DAMBAR CANNOT BE LOCATED ON THE LOWER
RADIUS OF THE FOOT.
e
B
6X
ddd
TOP VIEW
DIM
A
A1
A2
b
C
D
E
E1
e
L
L2
aaa
bbb
ccc
ddd
b
A2
M
C A-B D
DETAIL A
A
6X
ccc C
A1
SIDE VIEW
C
SEATING
PLANE
c
MILLIMETERS
MIN
NOM MAX
−−−
−−−
1.10
0.00
−−−
0.10
0.70
0.90
1.00
0.15
0.20
0.25
0.08
0.15
0.22
1.80
2.00
2.20
2.00
2.10
2.20
1.15
1.25
1.35
0.65 BSC
0.26
0.36
0.46
0.15 BSC
0.15
0.30
0.10
0.10
END VIEW
RECOMMENDED
SOLDERING FOOTPRINT*
6X
6X
0.30
0.66
2.50
0.65
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
www.onsemi.com
5
INCHES
NOM MAX
−−− 0.043
−−− 0.004
0.035 0.039
0.008 0.010
0.006 0.009
0.078 0.086
0.082 0.086
0.049 0.053
0.026 BSC
0.010 0.014 0.018
0.006 BSC
0.006
0.012
0.004
0.004
MIN
−−−
0.000
0.027
0.006
0.003
0.070
0.078
0.045
NCS210, NCS211, NCS212, NCS213, NCS214, NCS215
PACKAGE DIMENSIONS
UQFN10 1.4x1.8, 0.4P
CASE 488AT
ISSUE A
EDGE OF PACKAGE
D
ÉÉ
ÉÉ
ÉÉ
PIN 1 REFERENCE
2X
2X
0.10 C
L1
E
DETAIL A
Bottom View
(Optional)
0.10 C
B
TOP VIEW
A1
0.05 C
A1
C
SIDE VIEW
3
9X
EXPOSED Cu
A
0.05 C
10X
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.25 AND 0.30 MM
FROM TERMINAL.
4. COPLANARITY APPLIES TO THE EXPOSED PAD
AS WELL AS THE TERMINALS.
A
5
SEATING
PLANE
ÉÉ
ÉÉ
DIM
A
A1
A3
b
D
E
e
L
L1
L3
MOLD CMPD
A3
DETAIL B
Side View
(Optional)
MOUNTING FOOTPRINT
1.700
0.0669
e/2
L
0.663
0.0261
6
e
1
MILLIMETERS
MIN
MAX
0.45
0.60
0.00
0.05
0.127 REF
0.15
0.25
1.40 BSC
1.80 BSC
0.40 BSC
0.30
0.50
0.00
0.15
0.40
0.60
9X
0.563
0.0221
0.200
0.0079
10
10 X
L3
b
1
0.10 C A B
0.05 C
2.100
0.0827
NOTE 3
BOTTOM VIEW
0.400
0.0157
PITCH
10 X
0.225
0.0089
SCALE 20:1
mm Ǔ
ǒinches
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NCS210/D