T2500 D

T2500D
Triacs
Silicon Bidirectional Thyristors
Designed primarily for full-wave ac control applications, such as
light dimmers, motor controls, heating controls and power supplies.
http://onsemi.com
Features
• Blocking Voltage 400 V
• All Diffused and Glass Passivated Junctions for Greater Parameter
TRIACS
6 AMPERES RMS
400 VOLTS
Uniformity and Stability
• Small, Rugged, Thermowatt Construction for Low Thermal
•
•
Resistance, High Heat Dissipation and Durability
High Surge Current Capability 60 A Peak at TC = 80°C
Pb−Free Package is Available*
MT2
MT1
G
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Peak Repetitive Off−State Voltage (Note 1)
(Sine Wave 50 to 60 Hz,
TJ = −40 to +100°C, Gate Open)
VDRM,
VRRM
400
V
On−State RMS Current (TC = +80°C)
(Full Cycle Sine Wave 50 to 60 Hz)
IT(RMS)
6.0
A
Peak Non−repetitive Surge Current
(One Full Cycle, 60 Hz, TC = +80°C)
ITSM
60
A
I2t
15
A2s
PGM
16
W
PG(AV)
0.2
W
IGM
4.0
A
Operating Junction Temperature Range
TJ
−40 to +125
°C
Storage Temperature Range
Tstg
−40 to +150
°C
Symbol
Max
Unit
Thermal Resistance, Junction−to−Case
RqJC
2.7
°C/W
Maximum Lead Temperature for Soldering
Purposes 1/8″ from Case for 10 Seconds
TL
260
°C
Circuit Fusing Considerations (t = 8.3 ms)
Peak Gate Power
(TC = +80°C, Pulse Width = 10 msec)
Average Gate Power
(TC = +80°C, t = 8.3 ms)
Peak Gate Current (Pulse Width = 10 msec)
MARKING
DIAGRAM
T2500DG
AYWW
TO−220AB
CASE 221A
STYLE 4
1
A
Y
WW
G
= Assembly Location
= Year
= Work Week
= Pb−Free Package
THERMAL CHARACTERISTICS
Characteristic
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. VDRM, VRRM for all types can be applied on a continuous basis. Blocking
voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
PIN ASSIGNMENT
1
Main Terminal 1
2
Main Terminal 2
3
Gate
4
Main Terminal 2
ORDERING INFORMATION
Device
Package
Shipping
T2500D
TO220AB
500 Units / Box
T2500DG
TO220AB
(Pb−Free)
500 Units / Box
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
April, 2006 − Rev. 4
1
Publication Order Number:
T2500/D
T2500D
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted; Electricals apply in both directions)
Symbol
Min
Typ
Max
Unit
IDRM,
IRRM
−
−
10
2.0
mA
mA
Peak On-State Voltage (Note 2)
(ITM = "30 A Peak)
VTM
−
−
2.0
V
Gate Trigger Current (Continuous dc)
(VD = 12 Vdc, RL = 100 W)
MT2(+), G(+)
MT2(+), G(−)
MT2(−), G(−)
MT2(−), G(+)
IGT
Gate Trigger Voltage (Continuous dc) (All Four Quadrants)
(VD = 12 Vdc, RL = 100 W)
Gate Non−Trigger Voltage
(VD = 12 V, RL = 100 W, TC = 100°C)
Characteristic
OFF CHARACTERISTICS
Peak Repetitive Blocking Current TJ = 25°C
(Rated VDRM, VRRM; Gate Open) TJ = 100°C
ON CHARACTERISTICS
mA
−
−
−
−
10
20
15
30
25
60
25
60
VGT
−
1.25
2.5
V
VGD
0.2
−
−
V
Holding Current
(Main Terminal Voltage = 12 Vdc, Gate Open, Initiating Current = "200 mA)
IH
−
15
30
mA
Gate Controlled Turn-On Time
(Rated VDRM, IT = 10 A , IGT = 160 mA, Rise Time = 0.1 ms)
tgt
−
1.6
−
ms
dv/dt(c)
−
10
−
V/ms
dv/dt
−
75
−
V/ms
DYNAMIC CHARACTERISTICS
Critical Rate-of-Rise of Commutation Voltage
(Rated VDRM, IT(RMS) = 6 A, Commutating di/dt = 3.2 A/ms, Gate Unenergized,
TC = 80°C)
Critical Rate-of-Rise of Off-State Voltage
(Rated VDRM, Exponential Voltage Rise, Gate Open, TC = 100°C)
2. Pulse Test: Pulse Width ≤ 2.0 ms, Duty Cycle ≤ 2%.
http://onsemi.com
2
T2500D
Voltage Current Characteristic of Triacs
(Bidirectional Device)
+ Current
Symbol
Parameter
VDRM
Peak Repetitive Forward Off State Voltage
IDRM
Peak Forward Blocking Current
VRRM
Peak Repetitive Reverse Off State Voltage
IRRM
Peak Reverse Blocking Current
VTM
Maximum On State Voltage
IH
Holding Current
VTM
on state
IH
IRRM at VRRM
off state
IH
Quadrant 3
MainTerminal 2 −
VTM
Quadrant Definitions for a Triac
MT2 POSITIVE
(Positive Half Cycle)
+
(+) MT2
Quadrant II
(+) MT2
(−) IGT
GATE
Quadrant I
(+) IGT
GATE
MT1
MT1
REF
REF
IGT −
+ IGT
(−) MT2
Quadrant III
Quadrant 1
MainTerminal 2 +
(−) MT2
Quadrant IV
(+) IGT
GATE
(−) IGT
GATE
MT1
MT1
REF
REF
−
MT2 NEGATIVE
(Negative Half Cycle)
All polarities are referenced to MT1.
With in−phase signals (using standard AC lines) quadrants I and III are used.
http://onsemi.com
3
+ Voltage
IDRM at VDRM
T2500D
PACKAGE DIMENSIONS
TO−220
CASE 221A−07
ISSUE AA
−T−
B
F
T
SEATING
PLANE
C
S
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
T
U
V
Z
4
Q
A
1 2 3
U
H
K
Z
R
L
V
J
G
D
N
INCHES
MIN
MAX
0.570
0.620
0.380
0.405
0.160
0.190
0.025
0.035
0.142
0.147
0.095
0.105
0.110
0.155
0.014
0.022
0.500
0.562
0.045
0.060
0.190
0.210
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
0.045
−−−
−−−
0.080
STYLE 4:
PIN 1.
2.
3.
4.
MILLIMETERS
MIN
MAX
14.48
15.75
9.66
10.28
4.07
4.82
0.64
0.88
3.61
3.73
2.42
2.66
2.80
3.93
0.36
0.55
12.70
14.27
1.15
1.52
4.83
5.33
2.54
3.04
2.04
2.79
1.15
1.39
5.97
6.47
0.00
1.27
1.15
−−−
−−−
2.04
MAIN TERMINAL 1
MAIN TERMINAL 2
GATE
MAIN TERMINAL 2
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
4
For additional information, please contact your
local Sales Representative.
T2500/D