Automotive BLDC-fans EN

Automotive
BL-DC Fans for Commercial Vehicles
Edition 2015-10
Automotive
BL-DC Fans for Commercial Vehicles
Our automotive products BL-DC axial fans and BL-DC dual
Benefits and characteristics at a glance
centrifugal fans with housing are ground breakers in the field
of commercial vehicle air conditioning.
- over 40.000 operating hours
- variable speed control
They not only meet the increased demands for comfort, e.g. in
- high efficiency
- low sound emission thanks to aerodynamically optimized impellers
buses but also work wear-free for over 40,000 operating hours
as they are brushless.
No additional maintenance, no additional servicing.
- increased reliability due to the electronics’ high integration density
- can be retrofitted into existing systems
- compliance with the most stringent EMC requirements
This corresponds to the usual reliability expected from ebm-papst.
- configurable control curve
- optimized voltage independence
Data is subject to change without notice at ebm-papst discretion.
- extended temperature range
- long-life ball bearings
EC dual centrifugal blower: for top performance in minimal
2015-10
installation space; easy to regulate and extremely quiet.
2
Information
2
EC axial fans "Basic"
48
GreenTech: The green company
Ideas for changing technology in commercial vehicles
4
6
EC centrifugal fans - RadiCal, backward curved
Technology:
- Cables
52
74
78
EC axial fans
"Premium & Power"
- Technical parameters & scope
ebm-papst agents
EC axial fans
"Basic"
26
63
64
EC centrifugal fans - RadiCal
backward-curved
EC axial fans "Premium & Power"
- Accessories
- Conn. diagrams
62
Technology
8
20
3
2015-10
EC dual centrifugal fan with housing "Premium"
EC dual centrifugal fan with housing "Basic"
Agents
Our automotive products .....
EC dual centrifugal fans
with housing "Basic"
EC dual centrifugal fans
with housing "Premium"
Contents
Sustainable thought processes and actions.
As a matter of principle!
Environmental compatibility and sustainability have always formed the basis for all our thought processes and actions. Which is why we have
been dedicated for decades to the simple but firm principle of one of our company founders, Gerhard Sturm: “Every new product we develop
must be economically and ecologically superior to its predecessor.” We use the name GreenTech to express our company philosophy.
GreenTech means looking ahead.
GreenTech means environmentally compatible production.
We optimize the materials and processes we employ right from the
GreenTech also stands for maximum energy efficiency in our
design stage to ensure optimum environmental compatibility, the best
production processes. Photovoltaics, the intelligent use of waste heat
possible energy balance and – where feasible – maximum recyclability.
and groundwater cooling and of course our own cooling and ventila-
We are constantly improving materials, performance and the flow and
tion technology all play a major role.
noise characteristics of our products, while at the same time signifi-
Energy consumption at our most modern plant is 91% lower than
cantly reducing energy consumption.
demanded by the applicable regulations for example.
Close ties with universities and scientific institutes as well as a spon-
In this way, our products make their contribution to environmental
sored professorship in the field of power engineering and regenerative
protection from the development stage right through to recycling of
energies also allow us to benefit from the latest research results in
the packaging.
these areas – as well as providing us with a reservoir of highly qualified
young talent for the future.
GreenTech
follows a firm
philosophy.
GreenTech is
pro-active
development.
GreenTech
pays off
for our
customers.
GreenTech is
eco-friendly
production.
2015-10
GreenTech is
acknowledged
and certified.
4
Information
EC dual centrifugal fans
with housing "Premium"
At the heart of GreenTech is innovative EC technology from
environmental specialists and the public.
ebm-papst, which enables our best motors and fans to attain
Confirmation of this came in the form of an award as Germany’s most
efficiency levels of up to 90%, achieves maximum energy savings,
sustainable company in 2013 and the 2012 DEKRA Award
ensures a far longer service life and makes our products completely
in the category “Environment – The Challenge of Energy Transition” –
maintenance-free.
to name just a few examples.
Figures that are not just good for the environment but also of 100%
The ecological prowess of our products based on GreenTech princi-
benefit to users! Because all ebm-papst products – even those
ples is also verified by their compliance with even the most stringent
for which GreenTech EC technology is not (yet) of relevance to the
energy and environmental standards.
particular application – offer an ideal combination of economic and
In many cases they already more than satisfy limit values which will
ecological advantages.
EC dual centrifugal fans
with housing "Basic"
Our entire production chain can stand up to critical scrutiny by
EC axial fans
"Premium & Power"
GreenTech is a good investment for our customers.
5
2015-10
Technology
EC centrifugal fans - RadiCal
backward-curved
EC axial fans
"Basic"
only come into force in a few years time.
Agents
GreenTech is a recognized, award-winning concept.
Ideas for changing technology
in commercial vehicles
Climate comfort in a commercial vehicle is anything but a question of
Fans and blowers:
convenience. Both the transportation of people in buses and coaches,
as well truck journeys which are as stress and fatigue-free as possible,
for commercial vehicle air conditioning and cooling of individual components.
place high demands on vehicle technology; predominantly air conditioning,
ventilation, and heating.
For many years, major bus manufacturers have been installing air conditioners with brushless and wear-free centrifugal blowers and axial fans
from ebm-papst. In the mean time, these products are also now widely
used in the air conditioning and ventilation systems for the cabs in trucks,
tractors and construction machinery, as well as in transport refrigeration
systems.
A number of air conditioning manufacturers rely on our experience and
outstanding expertise in the core competencies of engine development,
aerodynamics, and electronics.
Counteracting high demands with new technologies:
In modern commercial vehicles, EC technology has now become
standard. Our new EC axial fans and EC dual centrifugal fans with second
generation housing set a precedent in global commercial vehicle air
conditioning. Our EC fans have even been able to demonstrate their clear
However, ebm-papst has even more to offer:
superiority in hot countries and tropical regions, where they have also
As a competent consultant and practical implementer, we will certainly
be able to find you a solution thanks to our in-depth knowledge from
proven their worth.
If you are unable to find a solution amongst our products, speak to us.
many applications.
But it is not just in the field of air conditioning products where customers
are relying on ebm-papst products: EC fans are increasingly being used
2015-10
for cooling heat exchangers in the engine compartment of vehicles.
6
Information
EC dual centrifugal fans
with housing "Premium"
In comparison:
EC dual centrifugal fans
with housing "Basic"
In brush motors from various manufacturers, the commutator
assumes the role of current distribution to the coils. The commutator
consists of copper fins embedded in an insulating compound. Mechanical springs push the integrated carbon brushes to the commutator. These
two rubbing mechanical components are the weak spot of conventional
DC motors. After around 5,000 operating hours, the carbon brushes are
run down and the commutator is worn. As a result, the entire blower must
be replaced. In addition, it is only possible to regulate speed via external
electronics.
EC axial fans
"Premium & Power"
The brushless DC motors from ebm-papst are completely different. Here,
an electronic controller directly integrated in the motor has the task of
distributing current. No brushes means no wearing parts. This increases
the service life of these motors to more than 40,000 hours. The user not
only saves money in terms of replacement parts and repair costs, he also
avoids unproductive downtimes and a possible loss of image.
This also requires special efforts in terms of the selection of materials and
testing of products. With the help of real-world extreme tests that we have
defined in collaboration with leading OEMs (e.g., salt spray, vibration and
temperature cycling tests), we are able to ensure the performance of the
fans.
EC axial fans
"Basic"
Apart from the considerably longer service life, our intelligent EC fans
provide advanced control and regulation possibilities. The functionality of
the fans can be checked via a diagnostic output at any time. Furthermore,
these display excellent electromagnetic compatibility traits and operate
EC centrifugal fans - RadiCal
backward-curved
extremely quietly.
EC motors are energy efficient, because the integrated electronics with
variable speed control only draw the energy actually required from the
Technology
on-board network. In the commercial vehicle sector, it is also crucial that
fans withstand constantly changing environmental influences. Standard
products would only provide unsatisfactory results here. For this reason,
automotive products from ebm-papst are also reliably protected against
Agents
7
2015-10
load dumping, reverse polarity, shock and vibration, as well as damage
from moisture and dirt penetration across a wide temperature range.
2015-10
8
9
Technology
EC centrifugal fans - RadiCal
backward-curved
EC axial fans
"Basic"
EC axial fans
"Premium & Power"
EC dual centrifugal fans
with housing "Basic"
EC dual centrifugal fans
with housing "Premium"
with brushless DC motor "Premium"
Agents
2015-10
EC dual centrifugal fans with housing
Information
EC dual centrifugal fan
with housing, for automotive applications, Ø 097
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
26
16-32
1150
3500
325
12,5
0
81
Curves:
Pa
(1) 24-volt version
-40..+85(2) 2,0
Connection diagram
Min. back pressure
VDC
P. 69 / D)
(2) above +70 °C with power derating
in wg
Subject to change
A
Input current
M3G 084-BF
Input power
K3G 097-AF22 -02(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PP plastic, black (according to UL 94 HB)
Blades: PA plastic (according to UL 94 HB)
– Degree of protection: IP 24 KM
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings on both sides
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Approvals: EAC; E1 in preparation
A
n
rpm
Ped
W
I
A
LWA
dB(A)
800
1
3500
325
12,50
81
A
2
4025
293
11,25
79
A
3
4495
272
10,45
78
A
4
4930
250
9,59
80
3
A
2.5
3
400
1.5
2
600
4
1
2
0.5
200
Pfs
0
qv
100
200
200
300
400
400
600
500
800
600
1cfm
1000
m³/h
2015-10
Air performance measured according to: ISO 5801, installation category A, in ebm-papst scroll housing without contact protection.
Intake-side sound level: LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation
from the standard configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
10
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
351
139.5
335
60
EC axial fans
"Basic"
60
6
1
2
EC centrifugal fans - RadiCal
backward-curved
170.5
136
Technology
4
Cable
P. 62
Connection
diagram P. 69
11
2015-10
45
64.5
90
101
Connector detail
1 = UN
2 = GND
3 = PWM/LIN
4 = INVLIN
5 = ABSENK
6 = diagnostic output
Tyco Junior Power Timer 929505-2, 6-pole, coded.
Mating connector Tyco 929504-2 (not included in scope of delivery).
Cable (460 mm) with mating connector, part no. 02001-4-1021 (not included in scope of delivery).
5
3
Agents
217.5
2.5
10
Ø 4.5
11
104
18
10
100
75.5
EC dual centrifugal fan
with housing, for automotive applications, Ø 097
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
26
16-32
1150
3500
325
12,5
0
81
Curves:
Pa
(1) 24-volt version
(2) above +70 °C with power derating
-40..+85(2) 2,0
Connection diagram
Min. back pressure
VDC
P. 69 / D)
This Typee is also available with a sealed plug.
in wg
Subject to change
A
Input current
M3G 084-BF
Input power
K3G 097-AF22 -07(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PP plastic, black (according to UL 94 HB)
Blades: PA plastic (according to UL 94 HB)
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings on both sides
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Qualified in accordance with: DIN ISO 16750
– Approvals: EAC; E1 in preparation
A
n
rpm
Ped
W
I
A
LWA
dB(A)
800
1
3500
325
12,50
81
A
2
4025
293
11,25
79
A
3
4495
272
10,45
78
A
4
4930
250
9,59
80
3
A
2.5
3
400
1.5
2
600
4
1
2
0.5
200
Pfs
0
qv
100
200
200
300
400
400
600
500
800
600
1cfm
1000
m³/h
2015-10
Air performance measured according to: ISO 5801, installation category A, in ebm-papst scroll housing without contact protection.
Intake-side sound level: LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation
from the standard configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
12
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
139.5
X
60
11
351
+20
415
Cable with plug (Plug is not sealed by the customer)
1 = +UB
black
2 = GND
brown
3 = PWM/LIN
yellow
4 = INVLIN
orange
5 = ABSENK
blue
6 = diagnostic output white
Tyco Junior Power Timer 929505-2, 6-pole, coded.
Mating connector Tyco 929504-2 (not included in scope of delivery).
4
EC centrifugal fans - RadiCal
backward-curved
170.5
79.5
2
5
Cable
P. 62
3
Technology
X
1
Connection
diagram P. 69
13
2015-10
136
99
60
45
64.5
90
101
6
Agents
217.5
10
Ø 4.5
104
18
10
100
75.5
EC axial fans
"Basic"
335
EC dual centrifugal fan
with housing, for automotive applications, Ø 097
Air flow
Speed
Input power
Input current
Min. back pressure
Sound power level
Perm. ambient temp.
Weight
Nominal data
Type
Motor
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
K3G 097-BF22 -02(1)
M3G 084-BF
26
16-32
1040
3700
300
11,7
0
80
Curves:
Pa
(1) 24-volt version
-40..+85(2) 2,0
P. 69 / D)
(2) above +70 °C with power derating
in wg
Subject to change
A
Connection diagram
Nominal voltage
range
VDC
Curve
Nominal voltage
– Material: Housing: PP plastic, black (according to UL 94 HB)
Blades: PA plastic (according to UL 94 HB)
– Degree of protection: IP 24 KM
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings on both sides
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Approvals: EAC; E1 in preparation
A
n
rpm
Ped
W
I
A
LWA
dB(A)
800
1
3700
300
11,70
80
A
2
4060
284
10,91
78
A
3
4580
263
10,10
78
A
4
4980
217
8,35
80
3
A
2.5
3
2
1
400
1.5
2
600
4
0.5
200
Pfs
0
qv
100
200
200
300
400
400
600
500
800
1 cfm
m³/h
2015-10
Air performance measured according to: ISO 5801, installation category A, in ebm-papst scroll housing without contact protection.
Intake-side sound level: LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation
from the standard configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
14
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
335
325
144.5
196
65
8.5
3
EC centrifugal fans - RadiCal
backward-curved
33.8
217.5
6
1
2
Technology
4
Cable
P. 62
Connection
diagram P. 69
15
2015-10
Connector detail
1 = UN
2 = GND
3 = PWM/LIN
4 = INVLIN
5 = ABSENK
6 = diagnostic output
Tyco Junior Power Timer 929505-2, 6-pole, coded.
Mating connector Tyco 929504-2 (not included in scope of delivery).
Cable (460 mm) with mating connector, part no. 02001-4-1021 (not included in scope of delivery).
5
3
Agents
14.65
163.5
129
92
55
4.8
113.5
70
50
50
EC axial fans
"Basic"
67
EC dual centrifugal fan
with housing, for automotive applications, Ø 097
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
26
16-32
1574
4680
740
28,0
0
88
-40..+60
2,0
Pa
A
800
3
4
600
2
3
400
1
2
200
Pfs
0
qv
200
400
400
600
800
800
1200
1
cfm
m³/h
Air performance measured according to: ISO 5801, installation category A, in ebm-papst scroll housing without contact protection.
Intake-side sound level: LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation
from the standard configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
2015-10
P. 73 / Q)
(1) 24-volt version
Curves:
16
Connection diagram
Min. back pressure
VDC
in wg
Subject to change
A
Input current
M3G 084-BF
Input power
K3G 097-AS82 -82(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PA plastic, black (according to UL 94 V0)
Blades: PA plastic, black (according to UL 94 V0)
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B"
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings on both sides
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Approvals: EAC; E1 in preparation
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
4680
740
28,0
88
A
2
5025
740
28,0
87
A
3
5380
659
25,3
85
A
4
5500
441
16,9
84
139.5
60
Connection
diagram P. 73
Technology
EC centrifugal fans - RadiCal
backward-curved
99
10
10
11
17
Agents
217.5
2015-10
Ø 4.5
104
170.5
18
1000+20
351
335
100
75.5
79.5
136
60
101
90
64.5
45
EC axial fans
"Basic"
75 ±10
8
Cable:
+ UB (black)
GND (brown)
PWM/LIN (yellow)
Diagnostic output (white)
EC axial fans
"Premium & Power"
EC dual centrifugal fans
with housing "Basic"
EC dual centrifugal fans
with housing "Premium"
Information
EC dual centrifugal fan
with housing, for automotive applications, Ø 097
K3G 097-AK36 -55
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
13
9-15
750
3630
195
15,0
300
70
13
9-15
1000
3740
385
29,5
0
76
2,6
P. 64 / A)
P. 64 / A)
Ped
W
I
A
LWA
dB(A)
A
1
---
---
---
---
A
2
3630
195
15,0
70
A
3
3875
177
13,5
71
A
4
4135
143
11,0
72
B
1
3740
385
29,5
76
B
2
4400
344
26,4
75
B
3
4775
309
23,8
76
B
4
4970
234
18,0
77
3,0
B
4
600
3
A
2,0
4
2
3
400
1,0
2
200
pfs
0
qV
100
200
200
300
400
400
600
500
800
600
1
cfm
1000
m 3/h
Air performance measured according to: ISO 5801, installation category A, in ebm-papst scroll housing without contact protection.
Intake-side sound level: LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation
from the standard configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
2015-10
-40..+85
n
rpm
800
18
(2)
(2) wide open, not recommended for continuous operation at 85°C
4,0
Curves:
Pa
(1) 12-volt version
1180
-40..+85(2) 2,3
Connection diagram
Perm. ambient temp.
VDC
in H2O
Subject to change
Sound power level
M3G 074-BF
B
Min. back pressure
A
Input current
M3G 074-BF
(1)
Input power
K3G 097-AK32 -42(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PP plastic, black (according to UL 94 HB)
Blades: PA plastic (according to UL 94 HB)
– Degree of protection: IP 24 KM (without connectors)
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings on both sides
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
450+20
8
Wire-end ferrule
Tin-plated
Connection
diagram P. 64
Technology
217.5
EC centrifugal fans - RadiCal
backward-curved
Cable detail:
(K3G097-AK36-55)
UN
black
PWM/LIN yellow
GND
brown
EC axial fans
"Basic"
170.5
136
60
64.5
45
90
101
10
18
10
104
19
Agents
Ø 4.5
60
2015-10
Cable detail:
(K3G097-AK32-42)
UN
black
PWM/LIN yellow
GND
brown
351
335
100
75.5
139.5
11
2.5
450+20
6
EC axial fans
"Premium & Power"
EC dual centrifugal fans
with housing "Basic"
EC dual centrifugal fans
with housing "Premium"
Information
2015-10
20
21
Technology
EC centrifugal fans - RadiCal
backward-curved
EC axial fans
"Basic"
EC axial fans
"Premium & Power"
EC dual centrifugal fans
with housing "Basic"
EC dual centrifugal fans
with housing "Premium"
with brushless DC motor "Basic"
Agents
2015-10
EC dual centrifugal fans with housing
Information
EC dual centrifugal fan
with housing, for automotive applications, Ø 097
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
26
16-32
1290
3830
394
15,2
0
79
Curves:
Pa
(1) 24-volt version
-40..+85(2) 2,0
Connection diagram
Min. back pressure
VDC
P. 64 / F)
(2) wide open, not recommended for continuous operation at 85°C
in H2O
Subject to change
A
Input current
M3G 074-CF
Input power
K3G 097-AK34 -65(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PP plastic, black (according to UL 94 HB)
Blades: PA plastic (according to UL 94 HB)
– Degree of protection: IP 24 KM (without connectors)
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings on both sides
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Approvals: EAC, E1
A
n
rpm
Ped
W
I
A
LWA
dB(A)
800
4
2,0
500
2,4
100 %
600
3
80 %
1,6
400
7
2
60 %
0,8
200
1,2
8
300
12
6
11
0,4
0
pfs
100
qV
10
100
200
200
300
400
400
600
9
500
800
5
600
1000
700
1200
1
cfm
m 3/h
2015-10
Air performance measured according to: ISO 5801, installation category A, in ebm-papst scroll housing without contact protection.
Intake-side sound level: LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation
from the standard configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
22
1
3830
394
15,2
79
A
2
4100
347
13,3
76
A
3
4380
285
10,9
75
A
4
4630
238
9,1
75
A
5
3150
215
8,3
75
A
6
3330
185
7,1
72
A
7
3510
149
5,7
70
A
8
3660
120
4,6
69
A
9
2240
79
3,1
66
A
10
2340
67
2,6
66
A
11
2430
53
2,0
61
A
12
2460
43
1,7
60
2,8
700
A
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
139.5
EC axial fans
"Basic"
EC centrifugal fans - RadiCal
backward-curved
170.5
136
217.5
3
Connector detail
NC
1 = + UB
NC NC = not used
2 = GND
H H = UN (26 V)
3 = PWM/LIN, 100% speed
4 = 80% speed
5 = 60% speed
6 = NC (not used)
Tyco Junior Power Timer 929505-2, 6-pole, coded.
Mating connector Tyco 929504-2 (not included in scope of delivery).
Cable (460 mm) with mating connector, part no. 02001-4-1021 (not included in scope of delivery).
1
2
Cable
P. 62
5
3
4
Technology
Speed setting
Pin 5 4
60% H NC
80% NC H
100% NC NC
6
Connection
diagram P. 64
23
2015-10
Ø 4.5
11
2.5
Agents
104
10
60
60
10
18
64.5
45
90
101
351
335
100
75.5
EC dual centrifugal fan
with housing, for automotive applications, Ø 097
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
26
16-32
1110
4040
344
13,3
0
77
Pa
in H2O
700
600
2,8
800
A
3,2
900
100 %
2,0
4
500
3
80 %
1,6
400
7
60 %
0,8
200
1,2
8
300
2
12
6
11
0,4
100
10
pfs
0
qV
100
200
200
9
300
400
600
400
500
800
5
600
1000
1
cfm
m 3/h
2015-10
Air performance measured according to: ISO 5801, installation category A, in ebm-papst scroll housing without contact protection.
Intake-side sound level: LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation
from the standard configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
24
P. 64 / F)
(2) wide open, not recommended for continuous operation at 85°C
2,4
Curves:
-40..+85(2) 2,0
Connection diagram
Min. back pressure
VDC
(1) 24-volt version
3,6
Subject to change
A
Input current
M3G 074-CF
Input power
K3G 097-BK34 -65(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PP plastic, black (according to UL 94 HB)
Blades: PA plastic (according to UL 94 HB)
– Degree of protection: IP 24 KM (without connectors)
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings on both sides
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Approvals: EAC, E1
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
4040
344
13,3
77
A
2
4210
325
12,5
76
A
3
4380
279
10,6
75
A
4
4630
242
9,2
75
A
5
3310
186
7,2
73
A
6
3390
171
6,6
71
A
7
3520
145
5,5
70
A
8
3650
121
4,6
69
A
9
2330
67
2,6
64
A
10
2360
62
2,4
62
A
11
2410
53
2,0
61
A
12
2480
42
1,6
60
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
335
8.5
144.5
EC axial fans
"Basic"
65
92
55
EC centrifugal fans - RadiCal
backward-curved
163.5
129
70
3
196
217.5
Speed setting
Pin 5 4
60% H NC
80% NC H
100% NC NC
2
Cable
P. 62
5
3
Technology
1
4
6
Connection
diagram P. 64
25
2015-10
3
Connector detail
NC
1 = + UB
NC NC = not used
2 = GND
H H = UN (26 V)
3 = PWM/LIN, 100% speed
4 = 80% speed
5 = 60% speed
6 = NC (not used)
Tyco Junior Power Timer 929505-2, 6-pole, coded.
Mating connector Tyco 929504-2 (not included in scope of delivery).
Cable (460 mm) with mating connector, part no. 02001-4-1021 (not included in scope of delivery).
Agents
113.5
4.8
50
325
67
50
2015-10
26
27
Technology
EC centrifugal fans - RadiCal
backward-curved
EC axial fans
"Basic"
EC axial fans
"Premium & Power"
EC dual centrifugal fans
with housing "Basic"
EC dual centrifugal fans
with housing "Premium"
with brushless DC motor "Premium & Power"
Agents
2015-10
EC axial fans
Information
EC axial fan
for automotive applications, Ø 280
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
26
16-32
2400
3100
200
7,5
---
79
Curves:
Pa
(1) 24-volt version
-40..+85(2) 2,4
Connection diagram
Max. back pressure
VDC
P. 65 / H)
(2) at maximum back pressure, not recommended for continuous operation at 85°C
in H2O
Subject to change
A
Input current
M3G 074-CF
Input power
W3G 280-EQ20 -43(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PP plastic, black (according to UL 94 HB)
Blades: PBT plastic, black (according to UL 94 HB)
– Airflow direction: "V" (intake over the rotor)
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: IP 24 KM
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Approvals: EAC, E1
A
n
rpm
Ped
W
I
A
LWA
dB(A)
1,5
400
1,0
300
4
200
0,5
3
100
2
pfs
0
qV
250
400
500
800
750
1200
1000
1600
1250
2000
1
cfm
m 3/h
2015-10
Air performance measured according to: ISO 5801, installation category A, without contact protection. Intake-side sound level:
LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard
configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
28
A
1
3100
200
7,5
79
A
2
3085
197
7,6
79
A
3
3090
192
7,3
81
A
4
3105
213
8,2
83
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
172
EC axial fans
"Basic"
EC centrifugal fans - RadiCal
backward-curved
1.5
21
18
.7˚
325 +20
Ø303
8.5
X
57
94+2
❮ "V"
1
2
6
3
Cable
P. 62
Connection
diagram P. 65
Technology
Mating connector on customer circuit:
Housing: Tyco 1-963212-1
Plug contacts:
2.5 mm Tyco 929938-1 (2x)
0.75 mm Tyco 929930-3 (4x)
Seal:
828905-1 (2x)
828904-1 (4x)
Detail X
1 = UN
black
2 = GND
brown
3 = PWM/LIN
yellow
4 = INVLIN
orange
5 = ABSENK
blue
6 = diagnostic output white
6-pole coded Tyco Junior Power Timer;
Cable (460 mm) with mating connector
Part number 02002-4-1021 (not included in scope of delivery)
29
2015-10
5
4
Agents
4.3
Ø294
298
Ø125
Ø292
8
EC axial fan
for automotive applications, Ø 300
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
13
9-16
2610
3200
220
16,7
---
83
Curves:
Pa
(1) 12-volt version
A
1,2
1,0
0,6
0,8
150
100
0,4
200
50
0,2
250
pfs
0
qV
4
3
2
250
400
500
800
750
1200
1000
1600
1250
2000
1
1500
2400
cfm
m 3/h
2015-10
Air performance measured according to: ISO 5801, installation category A, without contact protection. Intake-side sound level:
LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard
configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
30
P. 67 / K)
(2) above +85 °C with power derating
350
300
-40..+105(2) 2,0
Connection diagram
Max. back pressure
VDC
in H2O
Subject to change
A
Input current
M3G 084-BF
Input power
W3G 300-BV12 -41(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PA plastic, black (according to UL 94 HB)
Blades: PA plastic, black (according to UL 94 HB)
– Airflow direction: "V" (intake over the rotor)
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Qualified in accordance with: DIN ISO 16750
– Approvals: EAC, E1
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
3200
220
16,7
83
A
2
3140
235
18,1
82
A
3
2960
247
18,9
80
A
4
2840
248
19,0
82
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
+2
76.5 0
54
+3
0
9.
5
16
EC axial fans
"Basic"
Ø318 0
+1
EC centrifugal fans - RadiCal
backward-curved
0 +2
37
+2
24
°
X
+20
300 0
❮ "V"
1
2
3
Cable
P. 62
Connection
diagram P. 67
Technology
6
31
2015-10
5
4
Mating connector on customer circuit:
Housing: Tyco 1-963212-1
Plug contacts:
2.5 mm Tyco 929938-1 (2x)
0.75 mm Tyco 929930-3 (4x)
Seal:
828905-1 (2x)
828904-1 (4x)
Detail X
1 = +UB
black
2 = GND
brown
3 = PWM/LIN*
yellow
*optional LIN-BUS
4 = NC
(not used)
5 = ABSENK
blue
6 = diagnostic output white
6-pole coded Tyco Junior Power Timer;
Cable (460 mm) with mating connector
Part number 02002-4-1021 (not included in scope of delivery)
Agents
330 +2
4x9
0°
5
7.
Ø34
Ø3
EC axial fan
for automotive applications, Ø 300
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
26
16-32
2570
3160
205
7,90
---
82
Curves:
Pa
(1) 24-volt version
A
1,2
1,0
0,8
150
0,6
200
100
0,4
250
4
3
0,2
2
0
pfs
50
qV
250
400
500
800
750
1200
1000
1600
1250
2000
1
1500
2400
cfm
m 3/h
2015-10
Air performance measured according to: ISO 5801, installation category A, without contact protection. Intake-side sound level:
LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard
configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
32
P. 69 / D)
(2) above +95 °C with power derating
350
300
-40..+110(2) 2,0
Connection diagram
Max. back pressure
VDC
in H2O
Subject to change
A
Input current
M3G 084-BF
Input power
W3G 300-BS24 -01(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PA plastic, black (according to UL 94 HB)
Blades: PA plastic, black (according to UL 94 HB)
– Airflow direction: "V" (intake over the rotor)
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Qualified in accordance with: DIN ISO 16750
– Approvals: EAC, E1
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
3160
205
7,90
82
A
2
3150
216
7,30
82
A
3
3085
240
9,20
81
A
4
2965
244
9,40
80
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
+2
76.5 0
54
+3
0
9.
5
13
EC axial fans
"Basic"
Ø318 0
+1
24
EC centrifugal fans - RadiCal
backward-curved
0 0+2
37
+2
0
°
X
+20
300 0
2
6
3
Cable
P. 62
Connection
diagram P. 69
Technology
5
33
2015-10
4
Mating connector on customer circuit:
Housing: Tyco 1-963212-1
Plug contacts:
2.5 mm Tyco 929938-1 (2x)
0.75 mm Tyco 929930-3 (4x)
Seal:
828905-1 (2x)
1
828904-1 (4x)
❮ "V"
Detail X
1 = +UB
black
2 = GND
brown
3 = PWM/LIN*
yellow
*optional LIN-BUS
4 = INVLIN
orange
5 = ABSENK
blue
6 = diagnostic output white
6-pole coded Tyco Junior Power Timer;
Cable (460 mm) with mating connector
Part number 02002-4-1021 (not included in scope of delivery)
Agents
330 +20
4x9
0°
5
7.
Ø34
Ø3
EC axial fan
for automotive applications, Ø 300
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
26
16-32
2570
3160
205
7,90
---
82
Curves:
Pa
(1) 24-volt version
A
1,2
1,0
0,8
150
0,6
200
100
0,4
250
4
3
0,2
2
0
pfs
50
qV
250
400
500
800
750
1200
1000
1600
1250
2000
1
1500
2400
cfm
m 3/h
2015-10
Air performance measured according to: ISO 5801, installation category A, without contact protection. Intake-side sound level:
LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard
configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
34
P. 69 / D)
(2) above +95 °C with power derating
350
300
-40..+110(2) 2,0
Connection diagram
Max. back pressure
VDC
in H2O
Subject to change
A
Input current
M3G 084-BF
Input power
W3G 300-BV24 -01(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PA plastic, black (according to UL 94 HB)
Blades: PA plastic, black (according to UL 94 HB)
– Airflow direction: "V" (intake over the rotor)
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Qualified in accordance with: DIN ISO 16750
– Approvals: EAC, E1
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
3160
205
7,90
82
A
2
3150
216
7,30
82
A
3
3085
240
9,20
81
A
4
2965
244
9,40
80
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
+2
76.5 0
54
+3
0
9.
5
16
EC axial fans
"Basic"
Ø318 0
+1
EC centrifugal fans - RadiCal
backward-curved
0 +2
37
+2
24
°
X
+20
300 0
❮ "V"
1
2
3
Cable
P. 62
Connection
diagram P. 69
Technology
6
35
2015-10
5
4
Mating connector on customer circuit:
Housing: Tyco 1-963212-1
Plug contacts:
2.5 mm Tyco 929938-1 (2x)
0.75 mm Tyco 929930-3 (4x)
Seal:
828905-1 (2x)
828904-1 (4x)
Detail X
1 = +UB
black
2 = GND
brown
3 = PWM/LIN*
yellow
*optional LIN-BUS
4 = INVLIN
orange
5 = ABSENK
blue
6 = diagnostic output white
6-pole coded Tyco Junior Power Timer;
Cable (460 mm) with mating connector
Part number 02002-4-1021 (not included in scope of delivery)
Agents
330 +2
4x9
0°
5
7.
Ø34
Ø3
EC axial fan
for automotive applications, Ø 300
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
26
16-32
3225
3940
380
14,6
---
87
600
500
A
1,6
4
400
1,2
200
0,8
3
300
0,4
2
0
pfs
100
qV
250
500
500
750
1000
1000
1500
1250
2000
1
1500
2500
3000
cfm
m 3/h
2015-10
Air performance measured according to: ISO 5801, installation category A, without contact protection. Intake-side sound level:
LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard
configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
36
P. 69 / D)
(2) above +85 °C with power derating
2,0
Curves:
Pa
(1) 24-volt version
-40..+110(2) 2,0
Connection diagram
Max. back pressure
VDC
2,4 in H2O
Subject to change
A
Input current
M3G 084-BF
Input power
W3G 300-BV25 -21(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PA plastic, black (according to UL 94 HB)
Blades: PA plastic, black (according to UL 94 HB)
– Airflow direction: "V" (intake over the rotor)
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Qualified in accordance with: DIN ISO 16750
– Approvals: EAC, E1
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
3940
380
14,6
87
A
2
3815
408
15,7
87
A
3
3715
462
17,7
85
A
4
3630
495
19,0
88
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
+2
76.5 0
+3
54 0
9.
5
16
EC axial fans
"Basic"
Ø318 0
+1
EC centrifugal fans - RadiCal
backward-curved
0 +2
37
+2
24
°
X
+20
300 0
❮ "V"
1
2
3
Cable
P. 62
Connection
diagram P. 69
Technology
6
37
2015-10
5
4
Mating connector on customer circuit:
Housing: Tyco 1-963212-1
Plug contacts:
2.5 mm Tyco 929938-1 (2x)
0.75 mm Tyco 929930-3 (4x)
Seal:
828905-1 (2x)
828904-1 (4x)
Detail X
1 = +UB
black
2 = GND
brown
3 = PWM/LIN*
yellow
*optional LIN-BUS
4 = INVLIN
orange
5 = ABSENK
blue
6 = diagnostic output white
6-pole coded Tyco Junior Power Timer;
Cable (460 mm) with mating connector
Part number 02002-4-1021 (not included in scope of delivery)
Agents
330 +2
4x9
0°
5
7.
Ø34
Ø3
EC axial fan
for automotive applications, Ø 300
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
27,5
16-32
2955
3000
200
7,7
320
86
Curves:
Pa
(1) 24-volt version
-40..+105(2) 2,0
A
1.2
250
3
0.8
200
150
2
0.4
100
50
Pfs
0
qv
400
500
800
1000
1
1200
1500
2000
cfm
2500
m³/h
2015-10
Air performance measured according to: ISO 5801, installation category A, without contact protection. Intake-side sound level:
LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard
configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
38
P. 69 / D)
(2) above +85 °C with power derating
4
300
Connection diagram
Max. back pressure
VDC
in wg
Subject to change
A
Input current
M3G 084-BF
Input power
W3G 300-PW24 -01(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PA plastic, black (according to UL 94 HB)
Blades: PA plastic, black (according to UL 94 HB)
– Airflow direction: "A" (intake over the stator)
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Qualified in accordance with: DIN ISO 16750
– Approvals: EAC; E1 in preparation
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
3000
200
7,70
86
A
2
2980
263
10,10
85
A
3
3010
310
11,93
83
A
4
2950
333
12,80
84
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
74,8
+2
0
EC axial fans
"Premium & Power"
330
+2
0
+3
0
55
9,
5
14,5
Ø318 ±2
EC axial fans
"Basic"
4x9
0°
5
7,
Ø337 +20
Ø340 +2
0
Ø32
EC centrifugal fans - RadiCal
backward-curved
2 +02
24
°
75,6
+2
0
+20
0
300
2
6
3
Connection
diagram P. 69
Technology
5
39
2015-10
4
Mating connector on customer circuit:
Housing: Tyco 1-963212-1
Plug contacts:
2.5 mm Tyco 929938-1 (2x)
0.75 mm Tyco 929930-3 (4x)
Seal:
828905-1 (2x)
1
828904-1 (4x)
❮
"A"
Detail X
1 = +UB
black
2 = GND
brown
3 = PWM/LIN*
yellow
*optional LIN-BUS
4 = INVLIN
orange
5 = ABSENK
blue
6 = diagnostic output white
6-pole coded Tyco Junior Power Timer;
Cable (460 mm) with mating connector
Part number 02002-4-1021 (not included in scope of delivery)
Agents
X
EC axial fan
for automotive applications, Ø 385
Air flow
Speed
Input power
Input current
Max. back pressure
Sound power level
Perm. ambient temp.
Weight
Nominal data
Type
Motor
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
W3G 385-CT53 -61(1)
M3G 084-CF
13
9-16
4110
3100
445
34,0
---
89
500
A
1,6
300
1,2
200
0,8
4
400
3
0,4
2
0
pfs
100
qV
500
500
1000
1000
1500
1500
2000
2500
2000
3000
3500
1
4000
cfm
m 3/h
2015-10
Air performance measured according to: ISO 5801, installation category A, without contact protection. Intake-side sound level:
LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard
configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
40
-40..+105(2) 3,1
P. 68 / L)
(2) above +70 °C with power derating
2,0
Curves:
Pa
(1) 12-volt version
in H2O
Subject to change
A
Connection diagram
Nominal voltage
range
VDC
Curve
Nominal voltage
– Material: Housing: PA plastic, black (according to UL 94 HB)
Blades: PA plastic, black (according to UL 94 HB)
– Airflow direction: "V" (intake over the rotor)
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Qualified in accordance with: DIN ISO 16750
– Approvals: EAC, E1
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
3100
445
34,0
89
A
2
3000
487
37,6
89
A
3
2930
544
41,9
87
A
4
2815
590
45,6
89
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
+2
5
89.5 0
9.
+3
55 0
16
Ø396 0
+2
399 +3
Ø41
Ø4
22
EC centrifugal fans - RadiCal
backward-curved
4 +2
+2
24
°
X
+20
0
270
2
1
3
Detail X
1 = +UB
2 = diagnostic output
3 = PWM/LIN*
4 = GND
black
white
yellow
brown
Technology
4
*optional LIN-BUS
Connection
diagram P. 68
41
2015-10
Mating connector on customer circuit:
Housing:
DELPHI 13873952
Plug contacts:
9.5 mm DELPHI 10780235
4.8 mm DELPHI 10811289
Seal:
DELPHI 15327788
DELPHI 10788269
❮ "V"
Agents
4x9
0°
EC axial fans
"Basic"
5
7.
17 ±1
EC axial fan
for automotive applications, Ø 385
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
26
16-32
3425
2600
260
10,0
---
84
Pa
in H2O
350
0,6
1,0
150
100
0,4
200
50
0,2
250
0,8
300
pfs
0
A
qV
4
3
2
250
500
500
750
1000
1000
1500
1250
2000
1
cfm
1500
2500
3000
m 3/h
2015-10
Air performance measured according to: ISO 5801, installation category A, without contact protection. Intake-side sound level:
LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard
configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
42
P. 69 / D)
(2) above +95 °C with power derating
1,2
Curves:
-40..+110(2) 2,7
Connection diagram
Max. back pressure
VDC
(1) 24-volt version
1,4
Subject to change
A
Input current
M3G 084-BF
Input power
W3G 385-BV44 -01(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PA plastic, black (according to UL 94 HB)
Blades: PA plastic, black (according to UL 94 HB)
– Airflow direction: "V" (intake over the rotor)
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Qualified in accordance with: DIN ISO 16750
– Approvals: EAC, E1
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
2600
260
10,0
84
A
2
2505
272
10,5
83
A
3
2325
273
10,5
81
A
4
2215
274
10,5
82
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
5
79.5
+2
0
9.
+3
55 0
16
Ø396 0
+2
Ø4
22
+2
0
EC centrifugal fans - RadiCal
backward-curved
4
+2
0
24
°
X
5
2
6
3
Cable
P. 62
Connection
diagram P. 69
Technology
4
Mating connector on customer circuit:
Housing: Tyco 1-963212-1
Plug contacts:
2.5 mm Tyco 929938-1 (2x)
0.75 mm Tyco 929930-3 (4x)
Seal:
828905-1 (2x)
1
828904-1 (4x)
❮ "V"
Detail X
1 = +UB
black
2 = GND
brown
3 = PWM/LIN*
yellow
*optional LIN-BUS
4 = INVLIN
orange
5 = ABSENK
blue
6 = diagnostic output white
6-pole coded Tyco Junior Power Timer;
Cable (460 mm) with mating connector
Part number 02002-4-1021 (not included in scope of delivery)
43
2015-10
+20
0
270
Agents
399 +30
4x9
EC axial fans
"Basic"
0°
5
7.
Ø41
EC axial fan
for automotive applications, Ø 385
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
26
16-32
3425
2600
260
10,0
---
84
Pa
in H2O
350
0,6
1,0
150
100
0,4
200
50
0,2
250
0,8
300
pfs
0
A
qV
4
3
2
250
500
500
750
1000
1000
1500
1250
2000
1
cfm
1500
2500
3000
m 3/h
2015-10
Air performance measured according to: ISO 5801, installation category A, without contact protection. Intake-side sound level:
LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard
configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
44
P. 69 / D)
(2) above +95 °C with power derating
1,2
Curves:
-40..+110(2) 2,7
Connection diagram
Max. back pressure
VDC
(1) 24-volt version
1,4
Subject to change
A
Input current
M3G 084-BF
Input power
W3G 385-BS44 -01(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PA plastic, black (according to UL 94 HB)
Blades: PA plastic, black (according to UL 94 HB)
– Airflow direction: "V" (intake over the rotor)
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Qualified in accordance with: DIN ISO 16750
– Approvals: EAC, E1
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
2600
260
10,0
84
A
2
2505
272
10,5
83
A
3
2325
273
10,5
81
A
4
2215
274
10,5
82
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
5
79.5
+2
0
9.
+3
55 0
16
Ø396 0
+2
Ø4
22
+2
0
EC centrifugal fans - RadiCal
backward-curved
4
+2
0
24
°
X
1
2
6
3
Cable
P. 62
Connection
diagram P. 69
Technology
5
4
Mating connector on customer circuit:
Housing: Tyco 1-963212-1
Plug contacts:
2.5 mm Tyco 929938-1 (2x)
0.75 mm Tyco 929930-3 (4x)
Seal:
828905-1 (2x)
828904-1 (4x)
❮ "V"
Detail X
1 = +UB
black
2 = GND
brown
3 = PWM/LIN*
yellow
*optional LIN-BUS
4 = INVLIN
orange
5 = ABSENK
blue
6 = diagnostic output white
6-pole coded Tyco Junior Power Timer;
Cable (460 mm) with mating connector
Part number 02002-4-1021 (not included in scope of delivery)
45
2015-10
+20
0
270
Agents
399 +30
4x9
EC axial fans
"Basic"
0°
5
7.
Ø41
EC axial fan
for automotive applications, Ø 385
Air flow
Speed
Input power
Input current
Max. back pressure
Sound power level
Perm. ambient temp.
Weight
Nominal data
Type
Motor
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
W3G 385-CT65 -21(1)
M3G 084-CF
26
16-32
4375
3300
525
20,0
---
90
600
500
A
1,6
4
400
1,2
3
300
0,8
100
0,4
2
200
pfs
500
qV
500
1000
1000
1500
1500
2000
2500
1
cfm
2000
3000
3500
4000
m 3/h
2015-10
Air performance measured according to: ISO 5801, installation category A, without contact protection. Intake-side sound level:
LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard
configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
46
-40..+110(2) 3,1
P. 68 / L)
(2) above +85 °C with power derating
2,0
Curves:
Pa
(1) 24-volt version
2,4 in H2O
Subject to change
A
Connection diagram
Nominal voltage
range
VDC
Curve
Nominal voltage
– Material: Housing: PA plastic, black (according to UL 94 HB)
Blades: PA plastic, black (according to UL 94 HB)
– Airflow direction: "V" (intake over the rotor)
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
– Motor protection: Thermal overload protection, reverse polarity and locked-rotor protection,
load dump protection, undervoltage detection
– EMC regulations: VDE 0879-2
– Qualified in accordance with: DIN ISO 16750
– Approvals: EAC, E1
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
3300
525
20,0
90
A
2
3180
615
23,7
89
A
3
3050
610
23,5
88
A
4
2920
610
23,6
88
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
+2
5
89.5 0
9.
+3
55 0
16
Ø396 0
+2
399 +3
Ø41
Ø4
22
EC centrifugal fans - RadiCal
backward-curved
4 +2
+2
24
°
X
+20
0
270
2
1
3
Detail X
1 = +UB
2 = diagnostic output
3 = PWM/LIN*
4 = GND
black
white
yellow
brown
Technology
4
*optional LIN-BUS
Connection
diagram P. 68
47
2015-10
Mating connector on customer circuit:
Housing:
DELPHI 13873952
Plug contacts:
9.5 mm DELPHI 10780235
4.8 mm DELPHI 10811289
Seal:
DELPHI 15327788
DELPHI 10788269
❮ "V"
Agents
4x9
0°
EC axial fans
"Basic"
5
7.
17 ±1
2015-10
48
49
Technology
EC centrifugal fans - RadiCal
backward-curved
EC axial fans
"Basic"
EC axial fans
"Premium & Power"
EC dual centrifugal fans
with housing "Basic"
EC dual centrifugal fans
with housing "Premium"
with brushless DC motor "Basic"
Agents
2015-10
EC axial fans
Information
EC axial fan
for automotive applications, Ø 300
Sound power level
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
Pa
dB(A)
°C
kg
26
18-32
2840
3100
250
9,60
---
81
Pa
in H2O
1,0
150
0,6
200
100
0,4
250
0,8
300
50
0,2
Curves:
A
4
3
2
pfs
qV
200
400
500
600
1000
1000
800
1500
1200
2000
1400
2500
1600
cfm
m3/h
2015-10
Air performance measured according to: ISO 5801, installation category A, without contact protection. Intake-side sound level:
LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard
configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
50
P. 70 / M)
(2) above +70 °C with power derating
1
0
-40..+85(2) 2,6
Connection diagram
Max. back pressure
VDC
(1) 24-volt version
1,2
Subject to change
A
Input current
M1G 074-CF
Input power
W1G 300-EC24 -01(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Housing: PP plastic, black (according to UL 94 HB)
Blades: PA plastic, black (according to UL 94 HB)
– Airflow direction: "V" (intake over the rotor)
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B" according to EN 60335-1
– Installation position: Any
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
– Motor protection: Locked-rotor protection
– Approvals: E1 in preparation
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
3100
250
9,60
81
A
2
2985
247
9,47
83
A
3
2945
246
9,45
83
A
4
2800
242
9,29
83
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
On both sides for screws for fastening plastics, Ø 3.5 mm
+2
91
54+1
330
28°
Ø2.7/ 2.8
30
5
40
Ø3
EC centrifugal fans - RadiCal
backward-curved
62
Ø318+1
4x90°
EC axial fans
"Basic"
Ø3
5
9.
7.
Ø 33
7
11
X
❮ "V"
X
Cable
P. 62
Guard grille
P. 63
3
Connection
diagram P. 70
Technology
2
51
Agents
1
Detail X
1 = + UB
2 = 0–10 V
3 = GND
2015-10
Plug: Tyco MCP 2.8, 3-pole, coded
Housing: Tyco MCP 2.8: 1-1718627-1
Plug contacts: 2.8 mm Tyco 1241388-1 and Tyco 1241396-1
Seal: 1.2–2.1mm Tyco 963294-1 and 2.7–3.0 mm Tyco 963292-1
Cable 02020-4-1021 with mating connector not included in scope of delivery.
2015-10
52
53
Technology
EC centrifugal fans - RadiCal
backward-curved
EC axial fans
"Basic"
EC axial fans
"Premium & Power"
EC dual centrifugal fans
with housing "Basic"
EC dual centrifugal fans
with housing "Premium"
backward curved, with brushless DC motor
Agents
2015-10
EC centrifugal fans - RadiCal
Information
EC centrifugal fan - RadiCal
backward curved, for automotive applications, Ø 220
Air flow
Speed
Input power
Input current
Sound power level
Perm. ambient temp.
Weight
Nominal data
Type
Motor
VDC
m3/h
rpm
W
A
dB(A)
°C
kg
R1G 220-RD04 -03
M1G 074-BF
A
12
8-16
920
2720
87
8,4
74
-40..+60
1,5
P. 72 / N)
B
R1G 220-RD87 -03
M1G 074-BF
24
16-28
1090
3130
120
6,5
78
-40..+60
1,5
P. 72 / N)
Techn. features
and connection
diagram
Nominal voltage
range
VDC
Curve
Nominal voltage
– Material: Impeller: Glass-fiber reinforced PA plastic (according to UL 94 V0)
Rotor: Galvanized
Electronics housing: Die-cast aluminum, painted black
– Number of blades: 7
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B"
– Installation position: Shaft horizontal or rotor on bottom, rotor on top on request
– Condensation drainage holes: Rotor side
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
– Motor protection: Reverse polarity and locked-rotor protection
– Approvals: EAC
Pa
600
500
2.5
700
4
B
1.5
400
A
4
3
300
1
3
200
0.5
2
2
100
Pfs
0
qv
100
200
200
300
400
400
600
500
800
1
1
cfm
1000 m³/h
2015-10
Air performance measured according to: ISO 5801, installation category A, in ebm-papst inlet ring without contact protection.
Intake-side sound level: LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation
from the standard configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
54
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
2720
87
8,40
74
A
2
2645
87
8,53
71
A
3
2580
91
8,98
66
A
4
2675
87
8,44
69
B
1
3130
120
6,50
78
B
2
3065
124
6,69
75
B
3
2965
125
6,93
70
B
4
3060
123
6,69
73
2
Curves:
in wg
Subject to change
Information
EC dual centrifugal fans
with housing "Premium"
EC dual centrifugal fans
with housing "Basic"
EC axial fans
"Premium & Power"
Accessory part:
inlet ring 09609-2-4013,
not included in scope of delivery.
71±1
Ø252
Cable:
FLRYW 4x 0.75 mm2, 4x crimped splices
Inlet ring
P. 63
Technology
2
Terminal assignment
UN
red
PWM/LIN
yellow
DUE
white
GND
blue
Connection
diagram P. 72
55
2015-10
21
450+20
6
85 ±10
Ø155
Ø220
+0.3
4x90°
0.8
EC centrifugal fans - RadiCal
backward-curved
M4 (4x)
1.8
Ø161 -0.5
EC axial fans
"Basic"
Ø58±0.15
R2
Ø88
45°
Max. clearance for screw 6 mm
63.7
Agents
73.7
EC centrifugal fan - RadiCal
backward curved, for automotive applications, Ø 250
Air flow
Speed
Input power
Input current
Sound power level
Perm. ambient temp.
Weight
Nominal data
Type
Motor
VDC
m3/h
rpm
W
A
dB(A)
°C
kg
R1G 250-RC67 -03
M1G 074-CF
A
12
8-16
1030
2000
65
6,4
71
-40..+70
1,5
P. 72 / N)
B
R1G 250-RC75 -03
M1G 074-CF
24
16-28
1325
2550
130
7,1
76
-40..+60
1,5
P. 72 / N)
Techn. features
and connection
diagram
Nominal voltage
range
VDC
Curve
Nominal voltage
– Material: Impeller: Glass-fiber reinforced PA plastic (according to UL 94 V0)
Rotor: Galvanized
Electronics housing: Die-cast aluminum, painted black
– Number of blades: 7
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B"
– Installation position: Shaft horizontal or rotor on bottom, rotor on top on request
– Condensation drainage holes: Rotor side
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
– Motor protection: Reverse polarity and locked-rotor protection
– Approvals: EAC
Pa
500
400
2.4
600
2.0
700
4
300
1.2
A
3
4
3
0.8
200
2
0
Pfs
100
0.4
2
qv
100
200
200
300
400
400
600
500
800
1
600
1000
700
1200
1
cfm
m³/h
2015-10
Air performance measured according to: ISO 5801, installation category A, in ebm-papst inlet ring without contact protection.
Intake-side sound level: LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation
from the standard configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
56
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
2000
65
6,40
71
A
2
1935
69
6,85
66
A
3
1900
71
7,14
62
A
4
1975
67
6,60
65
B
1
2550
130
7,10
76
B
2
2445
131
7,45
72
B
3
2370
134
7,73
69
B
4
2410
132
7,59
70
B
1.6
Curves:
2.8 in wg
Subject to change
1.5
Cable:
FLRYW 4x 0.75 mm2, 4x crimped splices
450+20
Terminal assignment
UN
red
PWM/LIN
yellow
DUE
white
GND
blue
Connection
diagram P. 72
57
Technology
EC centrifugal fans - RadiCal
backward-curved
M4 (4x)
R2
8
EC axial fans
"Basic"
45°
Agents
31
85±10
Max. clearance for screw 6 mm
2015-10
6
Ø255
Ø240
85
Ø4.5 (4x)
91.5 ±1
4x 90°
2
Ø164.5
Ø250
Ø172.5+0.3
-0.5
Ø88
EC axial fans
"Premium & Power"
Accessory part:
inlet ring 96359-2-4013
not included in scope of delivery.
Ø58 ±0.15
EC dual centrifugal fans
with housing "Basic"
EC dual centrifugal fans
with housing "Premium"
Information
EC centrifugal fan - RadiCal
backward curved, for automotive applications, Ø 280
Perm. ambient temp.
Weight
VDC
m3/h
rpm
W
A
dB(A)
°C
kg
26
16-32
2740
2350
252
10,5
80
-40..+60
3,0
Pa
in H2O
Curves:
600
A
500
2,0
4
400
1,6
300
1,2
3
200
0,8
100
0,4
2
1
pfs
0
qV
200
400
500
600
1000
800
1000
1500
1200
2000
1400
2500
cfm
m3/h
2015-10
Air performance measured according to: ISO 5801, installation category A, in ebm-papst inlet ring without contact protection.
Intake-side sound level: LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation
from the standard configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
58
Techn. features
and connection
diagram
Sound power level
VDC
P. 71 / P)
(1) 24-volt version (also available as a 12-volt version)
2,4
Subject to change
A
Input current
M3G 084-CF
Input power
R3G 280-RU26 -81(1)
Speed
Motor
Air flow
Type
Nominal voltage
range
Nominal data
Nominal voltage
Curve
– Material: Impeller: Glass-fiber reinforced PA plastic (according to UL 94 V0, EN 45545-2 / HL3)
Rotor: Painted black
Electronics housing: Die-cast aluminum, painted black
– Number of blades: 5
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B"
– Installation position: Any
– Condensation drainage holes: Rotor side
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
n
rpm
Ped
W
I
A
LWA
dB(A)
A
1
2350
252
10,5
80
A
2
2280
298
12,4
75
A
3
2265
309
12,9
73
A
4
2305
278
11,6
74
Information
EC dual centrifugal fans
with housing "Premium"
Technical features: See connection diagram P. 71
Cable exit: To the side
Protection class: III
Approvals: EAC, E1
EC axial fans
"Premium & Power"
EC dual centrifugal fans
with housing "Basic"
–
–
–
–
4x90°
Max. clearance for screw 10 mm, tapping hole ready for self-tapping M5 screw.
45°
4x90°
31°
Max. clearance for
screw 12 mm,
tapping hole ready
for self-tapping
M6 screw.
Ø
Ø 7 58 ±
Ø 1 5 ± 0.2
0
Ø 1 15 ± .2
44 0.2
Connection
diagram P. 71
59
Technology
75 ±10
8
1000 +20
Cable:
2x 2.5 mm2, 4x 1.0 mm2, 6x crimped ferrules
Terminal assignment
UN +26 VDC black
GND
brown
PWM/LIN
yellow
INVLIN
orange
ABSENK
blue
DU
white
2015-10
8
Accessory part:
inlet ring 28000-2-4013
not included in scope of delivery.
EC centrifugal fans - RadiCal
backward-curved
Ø260
Ø280
Ø179.6
Ø176.7
Ø187.5
Ø294
112
7
R 53
R 33
R1
1.25
46
127
148.5 ±1
(4x)
EC axial fans
"Basic"
Ø4.5 (4x)
(4x)
(4x)
Agents
Max. clearance for screw 8 mm, tapping hole ready for self-tapping M4 screw.
EC centrifugal fan - RadiCal
backward curved, for automotive applications, Ø 280
Air flow
Speed
Input power
Input current
Sound power level
Perm. ambient temp.
Weight
Nominal data
Type
Motor
VDC
m3/h
rpm
W
A
dB(A)
°C
kg
R3G 280-RU65 -82
M3G 084-CF
A
24
16-32
3345
2830
460
19,0
85
-40..+60
3,0
Techn. features
and connection
diagram
Nominal voltage
range
VDC
Curve
Nominal voltage
– Material: Impeller: Glass-fiber reinforced PA plastic (according to UL 94 V0, EN 45545-2 / HL3)
Rotor: Painted black
Electronics housing: Die-cast aluminum, painted black
– Number of blades: 5
– Direction of rotation: Clockwise viewed toward rotor
– Degree of protection: Motor: IP 24 KM, electronics: IP 66 / 69 K
– Insulation class: "B"
– Installation position: Any
– Condensation drainage holes: Rotor side
– Mode: Continuous operation (S1)
– Mounting: Maintenance-free ball bearings
P. 66 / S)
Pa
Curves:
in wg
Subject to change
A
n
rpm
Ped
W
I
A
LWA
dB(A)
800
3
4
600
2
3
400
1
2
200
Pfs
0
qv
400
500
800
1000
1500
1200
2000
1cfm
1600
2500
3000
m³/h
2015-10
Air performance measured according to: ISO 5801, installation category A, in ebm-papst inlet ring without contact protection.
Intake-side sound level: LwA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are only applicable under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation
from the standard configuration, the parameters must be checked in installed condition. See Page 74 ff for detailed information.
60
A
1
2830
460
19,00
85
A
2
2830
595
24,69
81
A
3
2815
651
27,09
77
A
4
2845
631
26,19
77
Information
EC dual centrifugal fans
with housing "Premium"
Technical features: See connection diagram P. 66
Cable exit: To the side
Protection class: III
Approvals: EAC, E1 in preparation
EC axial fans
"Premium & Power"
EC dual centrifugal fans
with housing "Basic"
–
–
–
–
4x90°
Max. clearance for screw 10 mm, tapping hole ready for self-tapping M5 screw.
31°
Max. clearance for
screw 12 mm,
tapping hole ready
for self-tapping
M6 screw.
Ø
Ø 7 58 ±
Ø 1 5 ± 0.2
0
Ø 1 15 ± .2
44 0.2
Connection
diagram P. 66
Technology
Terminal assignment
UN +26 VDC black
GND
brown
PWM/LIN
yellow
DU
white
61
2015-10
Cable:
2x 2.5 mm2, 2x 1.0 mm2, 4x crimped ferrules
75 ±10
8
1000 +20
Accessory part:
inlet ring 28000-2-4013
not included in scope of delivery.
EC centrifugal fans - RadiCal
backward-curved
Ø260
Ø280
Ø179.6
Ø176.7
Ø187.5
Ø294
112
7
R 53
R 33
R1
1.25
46
8
(4x)
EC axial fans
"Basic"
Ø4.5 (4x)
(4x)
(4x)
Agents
Max. clearance for screw 8 mm, tapping hole ready for self-tapping M4 screw.
127
148.5 ±1
45°
4x90°
Cables
460
25
8
02001-4-1021
Wire-end ferrule
60
460
25
8
02002-4-1021
Wire-end ferrule
60
460
30
Wire-end ferrule
02020-1-1021
8
70
Cables
Part number
Application
02001-4-1021
EC dual centrifugal fan with housing
02002-4-1021
EC axial fan
02020-1-1021
W1G 300-EC24-01
2015-10
Subject to change
62
Information
EC dual centrifugal fans
with housing "Premium"
Accessories
120°
Ø2.8 (6x)
129°
92
Ø2.1 (9x)
Ø298.3
Ø140.5
)
(2x
56
)
(2x
)
2x
6(
16
EC dual centrifugal fans
with housing "Basic"
70
EC axial fans
"Premium & Power"
102°
Guard grille
Part number
Application
18600-2-4039
W1G 300-EC24-01
Subject to change
(Ø 5.5 )
4x90°
6x6
45°
Ø4.3 (4x)
0°
1.8
R2
EC axial fans
"Basic"
Ø5.5 (6x)
EC centrifugal fans - RadiCal
backward-curved
118
Ø245
Part number
Application
09609-2-4013
R1G 220-RD87-02
*The inlet rings for the R1G 250 and R1G 280 are pictured fully dimensioned on the respective product pages.
63
2015-10
Subject to change
Technology
Inlet ring*
Agents
Ø155
(Ø 242)
Ø252
42
Ø2
0.8
21
Connection diagram: A)
13 VDC (EC dual centrifugal fan with housing "Premium")
Notes on various control possibilities and their applications
33 k
1
(black)
2
(yellow)
UN +13 VDC
1k
PWM/LIN
RE typ. 75 k
0 V to 10 V
PWM
+
3
U
-
10 k
4
12 V
Speed setting
PWM 1 kHz - 50 kHz
100 % PWM -> n=max
10 % PWM -> n=min
0 % PWM -> Standby
Speed setting with
potentiometer
Full speed
(brown)
GND
Speed setting
0 V - 10 V
10 V -> n=max
1 V -> n=min
0 V -> Standby
Customer circuit
Connection
Fan
Connection diagram: F)
26 VDC (EC dual centrifugal fan with housing "Basic")
Notes on various control possibilities and their applications
1
UN +26 VDC
4.7 k
3
PWM/LIN
RE typ. 75 k
0 V to 10 V
(100 %)
4
+
PWM
U
RE typ. 75 k
(80 %)
-
10 k
RE typ. 75 k
5
(60 %)
12 V
6
2
Speed setting
PWM 1 kHz - 50 kHz
10 V -> n=max
1 V -> n=min
0 V -> Standby
Speed setting
with
potentiometer
Speed setting
0 V - 10 V
10 V -> n=max
1 V -> n=min
0 V -> Standby
2015-10
Customer circuit
64
Full speed
80 %
speed
GND
60 %
speed
Connection
Fan
Information
Connection diagram: H)
EC dual centrifugal fans
with housing "Premium"
26 VDC (EC axial fan "Premium")
Notes on various control possibilities and their applications
1
(black)
3
(yellow)
UB +26 VDC
4.7 k
PWM/LIN
RE typ. 22 k
0 V to 10 V
+
PWM
U
-
10 k
Full speed
Speed setting
0 V - 10 V
10 V -> n=max
1,5 V -> n=min
0 V -> Standby
U Standby threshold
UB
32 V
(orange)
INVLIN
RE typ. 100 k
6
(white)
Diagnostic output
0.05 k
Diagnostic output
Operation:
output level low (U = 0 V)
Rotor locked or
overvoltage/undervoltage:
output level high (U = UB - 2 V)
Imax = 50 mA
Collective fault signal possible
5
(blue)
LOWER
47 k
2
(brown)
Customer circuit
Speed setting:
21 V -> n=min
0 V -> n=max
UB -> Standby
Speed - lower
Input
UB -> n/2
open -> n
Connection
EC axial fans
"Premium & Power"
UB
32 V
-
GND
Fan
EC axial fans
"Basic"
Motor turns
21 V
U
Motor stops
Switch-on
threshold
EC centrifugal fans - RadiCal
backward-curved
21 V
+
Technology
Switch
on: typ. 1.5 V
off: typ. 1 V
Full speed
4
Standby
65
Agents
Speed setting with
potentiometer
2015-10
Speed setting
PWM 5 Hz - 100 kHz
100 % PWM -> n=max
15 % PWM -> n=min
0 % PWM -> Standby
EC dual centrifugal fans
with housing "Basic"
The blower speed is
determined by the
input (pin 3, 4) that
gives the higher
speed.
12 V
Connection diagram: S)
26 VDC (R3G 280-RU65-82)
Technical features:
• Control input 0–10 VDC / PWM
• Fault output (high-side switch max. 30 mA)
• Undervoltage detection
• Temperature derating
• Soft start / reverse polarity and locked-rotor protection
• Thermal overload protection for electronics
• Motor current limitation
• Overvoltage detection
• Load dump (58V)
Customer circuit
Full
speed
Connection
Speed setting
with potentiometer
Speed
setting
1
1
3
1
1K
4
0-10V
3
4
10V -> n=max
1.5V-> n=min
<1V -> n=0
3
12V
10K
3
2
UB +26VDC
1
UB +26VDC
GND
PWM/LIN
PWM/LIN
57K
DIAG
Speed
setting with
PWM 10Hz-50KHz
1
1K
3
4
100% PWM -> n=max
10% PWM -> n=min
<10% PWM -> n=0
Diagnostic output
Operation
Output level Low
2
4
2015-10
2
GND
4
Connection
Designation
Color
Assignment/function
1
UB +26 VDC
black
Power supply 26 VDC
2
DIAG
white
Diagnostic output
3
PWM/LIN
yellow
Analog voltage control input 0-10V or PWM
4
GND
brown
Power supply GND, reference ground
66
Fan / Motor
0.05K
DIAG
Information
Connection diagram: K)
Customer circuit
Connection
Speed
setting
Full
speed
Speed setting
with potentiometer
1
1
1
3
2
1.5-10V
Fan / Motor
+UB
+UB
GND
GND
PWM/LIN
2
3
EC dual centrifugal fans
with housing "Basic"
• Motor current limitation
• Overvoltage detection
• Temperature derating
• Load dump (58V)
PWM/LIN
3
10V -> n = max
1.5V -> n = min
<1V -> n = 0
EC axial fans
"Premium & Power"
Technical features:
• Control input 0–10 VDC / PWM
• Lowering input
• Fault output (high-side switch max. 30mA)
• Undervoltage detection
• Power limiter
• Reverse polarity and locked-rotor protection
• Soft start
• Thermal overload protection for electronics
EC dual centrifugal fans
with housing "Premium"
13 VDC (EC axial fan "Premium")
DIAG
3
NC
2
4
ABSENK
Speed
setting with
PWM 10Hz-50kHz
1
Diagnostic output
Operation
Output level Low
5
Speed lowering input
DIAG
1
ABSENK
6
6
3
EC axial fans
"Basic"
2
2
5
Color
Assignment/function
+UB
black
Power supply
2
GND
brown
Power supply GND, reference ground
3
PWM/LIN
yellow
Analog voltage control input 0-10 V or PWM
4
NC
orange
Not used / no function
5
ABSENK
blue
Lowering input
6
DIAG
white
Diagnostic output
- Operation: Output level low (U = 0 V)
- Rotor blocked or overvoltage/undervoltage
Output level high (U = UB -2 V)
- Imax = 50 mA
- Collective fault signal possible
Technology
Designation
1
67
2015-10
Connection
EC centrifugal fans - RadiCal
backward-curved
UB-> approx. n/2
open-> n
Agents
100% PWM -> n = max
10% PWM -> n = min
<10% PWM -> n = 0
Connection diagram: L)
13/26 VDC (EC axial fan "Power")
Technical features:
• Control input 0–10 VDC / PWM
• Fault output (high-side switch max. 30 mA)
• Undervoltage detection
• Temperature derating / power limiter
• Soft start / reverse polarity and locked-rotor protection
• Thermal overload protection for electronics
• Motor current limitation
• Overvoltage detection
• Load dump (58V)
Customer circuit
Connection
Speed
setting
Full
speed
Speed setting
with potentiometer
3
1
1
1
4
0-10V
3
4
3
10V -> n=max
1.5V-> n=min
<1V -> n=0
3
2
+UB
1
GND
PWM/LIN
DIAG
Diagnostic output
Operation
Output level Low
2
3
4
4
2015-10
100% PWM -> n=max
10% PWM -> n=min
<10% PWM -> n=0
Connection
Designation
Color
Assignment/function
1
+UB
black
Power supply
2
DIAG
white
Diagnostic output
- Operation: Output level low (U = 0 V)
- Rotor blocked or overvoltage/undervoltage
Output level high (U = UB -2 V)
- Imax = 50 mA
- Collective fault signal possible
3
PWM/LIN
yellow
Analog voltage control input 0-10V or PWM
4
GND
brown
Power supply GND, reference ground
68
+UB
GND
4
Speed
setting with
PWM 1-30KHz
Fan / Motor
PWM/LIN
DIAG
Information
Connection diagram: D)
Customer circuit
Connection
Speed
setting
Full
speed
Speed
setting
1
1
3
1
2
1.5-10V
2
3
10V -> n = max
1.5V -> n = min
<1V -> n = 0
4
EC dual centrifugal fans
with housing "Basic"
• Motor current limitation
• Overvoltage detection
• Temperature derating
• Load dump (58V)
Fan / Motor
+UB
+UB
GND
GND
PWM/LIN
3
21V -> n = min
0V -> n = max
UB -> standby
PWM/LIN
DIAG
INVLIN
4
see curve A
EC axial fans
"Premium & Power"
Technical features:
• Control input 0–10 VDC / PWM
• Lowering input
• INVLIN (inverse linear control input)
• Fault output (high-side switch max. 30mA)
• Undervoltage detection
• Power limiter
• Reverse polarity and locked-rotor protection
• Soft start
• Thermal overload protection for electronics
EC dual centrifugal fans
with housing "Premium"
26 VDC (EC axial fan "Premium & Power")
INVLIN
ABSENK
5
Speed
setting with
PWM 10Hz-50kHz
Speed setting
with potentiometer
Speed lowering input
ABSENK
DIAG
1
1
6
1
3
A:
3
U
UB
2
2
5
EC axial fans
"Basic"
Standby threshold
100% PWM -> n = max
10% PWM -> n = min
<10% PWM -> n = 0
32V
UB-> approx. n/2
open-> n
standby
Switch on
typ. 1.5V
Switch off
typ. 1V
Diagnostic output
Operation
Output level Low
Motor stops
Switch-on threshold
6
21V
EC centrifugal fans - RadiCal
backward-curved
Motor turns
UB
Color
Assignment/function
+UB
black
Power supply
2
GND
brown
Power supply GND, reference ground
3
PWM/LIN
yellow
Analog voltage control input 0-10 V or PWM
4
INVLIN
orange
Control input, inverse linear
5
ABSENK
blue
Lowering input
6
DIAG
white
Diagnostic output
- Operation: Output level low (U = 0 V)
- Rotor blocked or overvoltage/undervoltage
Output level high (U = UB -2 V)
- Imax = 50 mA
- Collective fault signal possible
Technology
Designation
1
69
Agents
Connection
32V
2015-10
21V
2
Connection diagram: M)
26 VDC (W1G 300-EC24-01)
Technical features:
• Control input 0–10 VDC / PWM
• Undervoltage detection
• Locked-rotor protection
• Soft start
• Thermal overload protection for electronics
• Motor current limitation
• Overvoltage detection
Customer circuit
Full
speed
Connection
Speed
adjustable via
potentiometer
Adjustable
speed
2
1
Fan / Motor
UN +24VDC
1
1
4.7K
U1
1-10V
2
3
PWM/LIN
10K
2
2
47K
47K
3
GND
3
GND
n max.
n max. = PWM/LIN with +UB or 10 V respectively 100 %*
2200 rpm = PWM/LIN with 5,5 V respectively 55 %*
2200 rpm
1700 rpm = PWM/LIN with 2,0 V respectively 20 %*
1700 rpm
0 rpm = PWM/LIN with GND or 0 V respectively 0 %
* With PWM control, the PWM level is defined with 10 V.
0 rpm
2015-10
1 2
Connection
Designation
Assignment/function
1
UB +24 VDC
Power supply 24 VDC, maximum ripple 3.5%
2
PWM/LIN
Analog voltage control input 0-10 V or PWM
3
GND
Reference ground
70
3 4 5
6 7
8 9
10
U x1V
PWM x 10% (10V)
Information
Connection diagram: P)
Technical features:
• Control input 0–10 VDC / PWM
• Lowering input
• INVLIN (inverse linear control input)
• Fault output (high-side switch max. 30mA)
• Undervoltage detection
• Power limiter
• Reverse polarity and locked-rotor protection
• Soft start
• Thermal overload protection for electronics
Connection
Speed
adjustable via
potentiometer
1
1
UB +26 VDC
1
3
1
+UB_24VDC
GND
1.5-10V
PWMLIN
2
10V -> n = max
1.5V -> n = min
<1V -> n = 0
2
GND
2
3
Fan / Motor
3
12V
10K
PWMLIN
>43K
3
100K
47K
DU
INVLIN
2
EC axial fans
"Premium & Power"
Adjustable
speed
EC dual centrifugal fans
with housing "Basic"
• Motor current limitation
• Overvoltage detection
• Temperature derating
• Load dump (58V)
Customer circuit
Full
speed
EC dual centrifugal fans
with housing "Premium"
26 VDC (R3G 280-RU26-81)
INVLIN
4
ABSENK
Adjustable
speed
ABSENK
5
Lowering input speed
DU
1
1
3
1
6
0.05K
4
A:
21V -> n = min
0V -> n = max
UB -> standby
2
U
UB
Standby threshold
5
32V
UB-> approx. n/2
open-> n
EC axial fans
"Basic"
see curve A
100% PWM -> n = max
10% PWM -> n = min
<10% PWM -> n = 0
standby
Switch on
typ. 1.5V
Switch off
typ. 1V
Diagnostic output
Nominal operation
Output level low
Motor stopped
Switch-on threshold
6
21V
Rotor locked
Output level high (U = UB - 2V)
I max = 30 mA
Collective fault signal possible
Motor turning
Color
Assignment/function
UB +26 VDC
black
Power supply 26 VDC
2
GND
brown
Power supply GND, reference ground
3
PWM/LIN
yellow
Analog voltage control input 0-10 V or PWM
4
INVLIN
orange
Control input, inverse linear
5
ABSENK
blue
Lowering input
6
DU
white
Diagnostic output
Technology
Designation
1
32V
71
Agents
Connection
EC centrifugal fans - RadiCal
backward-curved
UB
21V
2
2015-10
Speed
adjustable via
PWM 10Hz-50kHz
Connection diagram: N)
12/24 VDC (R1G 220/250)
Technical features:
• Control input 0–10 VDC / PWM
• Tach output
• Reverse polarity and locked-rotor protection
• Soft start
• Motor current limitation
• Temperature derating
Customer circuit
Full
speed
Connection
Speed
adjustable via
potentiometer
Adjustable
speed
1
1
2
Fan / Motor
UN +24VDC
UB
1
1-10V
4
2
10V -> n=max
1V -> n=min
<1V -> n=0
Safe start-up
at Unom -30%
from 4V Ucontr.
2
12V
10K
PWM/lin
RE>100K
2
4
3
DUE
680R
47V
Speed
adjustable via
PWM 1-10kHz
Setting of values with
ebm temperature controller
1
Reverse-polarity
protection
1
T
N
2
12V
OUT
2
50003-1-0174
4
100% PWM -> n=max
10% PWM -> n=min
<10% PWM -> n=0
Safe start-up
at Unom -30%
from 40% PWM
2015-10
GND
P
33K
4
4
T<10°C -> n=0
T>45°C -> n=max
Connection
Designation
Color
Assignment/function
1
UN
red
Power supply 24 VDC, maximum ripple 3.5%
2
PWM/LIN
yellow
Control input Re > 100 K
3
DUE
white
Tach output, 3 pulses per revolution, Isink max. = 10 mA
4
GND
blue
Reference ground
72
DUE
GND1
Information
Connection diagram: Q)
EC dual centrifugal fans
with housing "Premium"
26 VDC (K3G 097-AS82-82)
Connection
Speed
adjustable via
potentiometer
Adjustable
speed
1
1
4
UB +26VDC
1
0-10V
2
10V -> n=max
1.5V-> n=min
<1V -> n=0
4
12V
10K
2
1
UB
GND
2
4
Fan / Motor
GND
PWMLIN
4
6
2
PWMLIN
<30K
DU
DU
EC axial fans
"Premium & Power"
Customer circuit
Full
speed
EC dual centrifugal fans
with housing "Basic"
Technical features:
• Control input 0–10 VDC / PWM
• Fault output (open collector)
• Undervoltage detection
• Power limiter
• Soft start
• Thermal overload protection for electronics
• Motor current limitation
• Overvoltage detection
• Load dump (58V)
2.1K
Speed
adjustable via
PWM 10Hz-50KHz
1
4
2
EC axial fans
"Basic"
100% PWM -> n=max
15% PWM -> n=min
<10% PWM -> n=0
Diagnostic output
Nominal operation
Output level low
6
Assignment/function
black
Power supply 26 VDC
2
- UB 0 VDC
brown
Power supply GND, reference ground
4
PWM/LIN
yellow
Analog voltage control input 0-10V or PWM
6
DU
white
Diagnostic output
Technology
Color
UB +26 VDC
73
Agents
Designation
1
2015-10
Connection
EC centrifugal fans - RadiCal
backward-curved
2
Technical parameters and scope
High standards for all ebm-papst products
At ebm-papst we are always looking to improve our products to be able to offer customers just what they need for their particular requirements.
Careful monitoring of the market enables us to constantly incorporate enhancements into our products.
As shown by the technical parameters listed below, you can always be sure of finding the right solution from ebm-papst for whatever application
you may have in mind.
General performance parameters
Service life
Any deviations from the technical data and technical parameters described
The service life of ebm-papst automotive products depends on:
here are given in the product-specific data sheet.
– The service life of the bearing system
Degree of protection
The degree of protection is specified in the product-specific data sheets.
The service life of the bearing system is primarily governed by the thermal
load on the bearings.
Insulation class
For the majority of our products we use maintenance-free ball bearings
The insulation class is specified in the product-specific data sheets.
which can be installed in any installation position.
Installation position
As a rough guide (depending on the general conditions), the ball bearings
The installation position is specified in the product-specific data sheets.
have a life expectancy L10 of approx. 40,000 hours of operation at an
Condensation drainage holes
ambient temperature of 40 °C.
Information on condensation drainage holes is provided in the productspecific data sheets.
We will gladly provide you with a life expectancy calculation based on your
specific usage conditions.
Mode of operation
The mode of operation is specified in the product-specific data sheets.
Motor protection/thermal protection
Information on motor protection and thermal protection is provided in the
Protection class
product-specific data sheets.
The protection class is specified in the product-specific data sheets.
The following protection methods are provided depending on the typee of
motor and area of application:
– Thermal overload protector, in-circuit
– PTC/NTC with electronic diagnostics
2015-10
– Current limitation via electronics
74
Information
EC dual centrifugal fans
with housing "Premium"
Legal and normative specifications
All ebm-papst products are subjected to comprehensive testing in confor-
The products described in this catalog are developed and manufactured in
mity with the normative specifications and also incorporating the extensive
accordance with the standards applying to the particular product and,
experience of ebm-papst.
if known, in accordance with the conditions of the particular area of
application.
Vibration testing is performed as follows:
Standards
– Vibration test in operation according to DIN IEC 68 Part 2-6
Information on standards is provided in the product-specific data sheets.
EC axial fans
"Premium & Power"
Vibration testing
EC dual centrifugal fans
with housing "Basic"
Mechanical strain/performance parameters
– Vibration test at standstill according to DIN IEC 68 Part 2-6
EMC
Shock load
Information on EMC standards is provided in the product-specific data
Shock load testing is performed as follows:
sheets.
– Shock load according to DIN IEC 68 Part 2-27
Compliance with EMC standards has to be assessed on the final product,
as EMC properties may change under different installation conditions.
Approvals
– Residual imbalance according to DIN ISO 1940
Please contact us if you require a specific Typee of approval (e1, UL, etc.)
– Standard balancing quality level G 6.3
for your ebm-papst product.
Should your particular application require a higher level of balancing,
Most of our products can be supplied with the applicable approval.
please contact us and specify the details in your order.
Information on existing approvals is provided in the product-specific
Chemical and physical strain/performance parameters
EC axial fans
"Basic"
Balancing grade testing is performed as follows:
data sheets.
Please consult your ebm-papst contact for any questions regarding
Air performance measurements
chemical and physical strain.
All air performance measurements are conducted on intake-side chamber
Areas of use, industries & applications
Our products are used in a variety of industries and for numerous
applications:
Ventilation, air conditioning and refrigeration technology, clean room
technology, automotive and railway engineering, medical and laboratory
technology, electronics, computer and office systems, telecommunications,
household appliances, heating systems, machinery and installations, drive
test rigs conforming to the requirements of ISO 5801 and DIN 24163. The
fans under test are attached to the measuring chamber with free air intake
EC centrifugal fans - RadiCal
backward-curved
Balancing grade
and exhaust (installation category A) and operated at nominal voltage,
with alternating current also at nominal frequency, without any additional
attachments such as a guard grille.
As required by the standards, the air performance curves shown are referenced to an air density of 1,15 kg/m3.
engineering.
Agents
75
2015-10
Technology
Our products are not intended for use in the aerospace industry!
Technical parameters and scope
Air and sound measurement conditions
Sound pressure and sound power level
Measurements on ebm-papst products are taken under the following
All acoustic values are determined in accordance with ISO 13347, DIN
conditions:
45635 and ISO 3744/3745 as per accuracy class 2 and given in A-rated
– Axial and diagonal fans in airflow direction "V" in full nozzle without
form.
– Backward-curved centrifugal fans, free-running with inlet ring
guard grille
For measurement of the sound pressure level Lp the microphone is located
on the intake side of the fan being tested, generally at a distance of 1 m on
– Forward-curved single and dual-inlet centrifugal fans with
the fan axis.
housing
For measurement of the sound power level Lw 10 microphones are distributed over an enveloping surface on the intake side of the fan being tested
Sound measurements
(see graphic). The measured sound power level can be roughly calculated
All sound measurements are taken in anechoic rooms with reverberant
from the sound pressure level by adding 7 dB.
floor. ebm-papst acoustic test chambers meet the requirements of
accuracy class 1 as per DIN EN ISO 3745. For sound measurement, the
fans being tested are positioned in a reverberant wall and operated at
Measurement set-up according to ISO 13347-3 and DIN 45635-38:
10 measuring points
nominal voltage, with alternating current also at nominal frequency,
d≥D
without any additional attachments such as a guard grille.
h = 1,5d ... 4,5d
D
1,5d
Measurement area S = 6d2 + 7d (h + 1,5d)
h
3d
2015-10
2d
76
Information
10
15
EC dual centrifugal fans
with housing "Basic"
EC dual centrifugal fans
with housing "Premium"
This means that a total level of 84 dB(A) is to be expected for the installation.
EC axial fans
"Premium & Power"
pressure level of one fan is 75 dB(A). The level increase determined from the graph is 9 dB.
9
Example: There are 8 axial fans A3G800 on a condenser. According to the data sheet, the sound
5
values specified in the data sheet. This is shown in the adjacent graph.
0
The noise characteristics of several identical fans can be predicted on the basis of the sound
[dB]
[dB(A)]
The addition of 2 sound sources with the same level produces a level increase of approx. 3 dB.
Increase in sound pressure / sound power level
Cumulative level of several sound sources with the same level
1
2
3
4
5
6 7 8 9 10
15
20 25
level of 76.5 dB(A) is to be expected for the unit.
3
2
EC axial fans
"Basic"
4 dB. The level increase of approx. 1.5 dB can now be read off the graph. This means that a total
0
4
8
12
16
20
The sound power level is not governed by the distance from the noise source. By contrast, the
-10
sound pressure level decreases with increasing distance from the sound source. The adjacent
0
[dB]
[dB(A)]
Distance laws
24
[dB]
[dB(A)]
Difference in level with two sources of sound
EC centrifugal fans - RadiCal
backward-curved
dB(A) at the point of operation and one axial fan A3G710 with 71 dB(A). The difference in level is
1,5
Example: In a ventilation unit, there is one axial fan A3G800 with a sound pressure level of 75
1
specified in the data sheet. This is shown in the adjacent graph.
0
The noise characteristics of two different fans can be predicted on the basis of the sound values
Increase in sound pressure / sound power level
Cumulative level of two sound sources with different levels
[dB]
[dB(A)]
Number of sources of sound with identical level
graph shows the decrease in level under far field conditions. Far field conditions apply if there is
and the level may decrease to a far lesser extent. The following example only applies to far field
conditions and may vary considerably as a result of installation effects:
For an axial fan A3G300, a sound pressure level of 65 dB(A) was measured at a distance of 1 m.
From the adjacent graph, this would yield a reduction of 26 dB at a distance of 20 m, i.e. a sound
-20
-26
1
Distance
2
5
10
20
50
Technology
6 dB each time the distance is doubled. Different relationships apply in the near field of the fan
-30
be consulted for more detailed information on far fields. The level in the far field decreases by
-40
the wavelength under consideration. On account of the complexity of the topic, literature should
Decrease in sound pressure level
a considerable distance between the microphone and the fan in relation to the fan diameter and
100
[m]
Agents
77
2015-10
pressure level of 39 dB(A).
ebm-papst in Germany
2015-10
ebm-papst Mulfingen GmbH & Co. KG
Bachmühle 2
74673 Mulfingen
GERMANY
Phone +49 7938 81-0
Fax +49 7938 81-110
[email protected]
78
ebm-papst St. Georgen GmbH & Co. KG
Hermann-Papst-Straße 1
78112 St. Georgen
GERMANY
Phone +49 7724 81-0
Fax +49 7724 81-1309
[email protected]
Berlin
Dipl.-Ing. (TH) Jens Duchow
Händelstraße 7
16341 Panketal
GERMANY
Phone +49 30 944149-62
Fax +49 30 944149-63
[email protected]
Heilbronn / Heidelberg
Dipl.-Ing. Mark Gartner
Gehrweg 12
74199 Unterheinriet
GERMANY
Phone +49 7130 404569-1
Fax +49 7130 404569-2
[email protected]
Bielefeld
Dipl.-Ing. (FH) Wolf-Jürgen Weber
Niehausweg 13
33739 Bielefeld
GERMANY
Phone +49 5206 91732-31
Fax +49 5206 91732-35
[email protected]
Kassel
Dipl.-Ing. (FH) Ralph Brück
Hoherainstraße 3 b
35075 Gladenbach
GERMANY
Phone +49 6462 4071-10
Fax +49 6462 4071-11
[email protected]
Dortmund
Dipl.-Ing. (FH) Hans-Joachim Pundt
Auf den Steinern 3
59519 Möhnesee-Völlinghausen
GERMANY
Phone +49 2925 800-407
Fax +49 2925 800-408
[email protected]
Koblenz
Winfried Schaefer
Hinter der Kirch 10
56767 Uersfeld
GERMANY
Phone +49 2657 16-96
Fax +49 2657 16-76
[email protected]
Frankfurt
Dipl.-Ing. Christian Kleffmann
Dr.-Hermann-Krause-Straße 23
63452 Hanau
GERMANY
Phone +49 6181 1898-12
Fax +49 6181 1898-13
[email protected]
Munich
Dipl.-Wirt.-Ing. (FH) Jens Peter
Landsbergerstraße 14
86932 Pürgen
GERMANY
Phone +49 8196 99877-54
Fax +49 8196 99877-55
[email protected]
Halle
Dipl.-Ing. (TU) Michael Hanning
Lercheneck 4
06198 Salzatal / OT Lieskau
GERMANY
Phone +49 345 55124-56
Fax +49 345 55124-57
[email protected]
Nuremberg
Dipl.-Wirt.-Ing. (FH) Axel Resch
Dr.-August-Koch-Str. 1
91639 Wolframs-Eschenbach
GERMANY
Phone +49 9875 9783-170
Fax +49 9875 9783-171
[email protected]
Hamburg
Ingenieurbüro Breuell GmbH
Ing. Dirk Kahl
Elektroingenieur
Oststraße 96
22844 Norderstedt
GERMANY
Phone +49 40 538092-19
Fax +49 40 538092-84
[email protected]
Offenburg
Dipl.-Ing. (FH) Ralf Braun
Hubeneck 21
77704 Oberkirch
GERMANY
Phone +49 7802 9822-52
Fax +49 7802 9822-53
[email protected]
fan agent
Stuttgart
Dipl.-Ing. (FH) Rudi Weinmann
Hindenburgstraße 100/1
73207 Plochingen
GERMANY
Phone +49 7153 9289-80
Fax +49 7153 9289-81
[email protected]
compact fan agent
motor specialist
ebm-papst Landshut GmbH
Hofmark-Aich-Straße 25
84030 Landshut
GERMANY
Phone +49 871 707-0
Fax +49 871 707-465
[email protected]
Ulm
M.Sc. Reinhard Sommerreißer
Am Germanenring 13
86674 Baar / Schwaben
GERMANY
Phone +49 8276 5899-775
Fax +49 8276 5899-776
[email protected]
Distributors
Frankfurt
R.E.D. Handelsgesellschaft mbH
Gutenbergstraße 3
63110 Rodgau - Jügesheim
GERMANY
Phone +49 6106 841-0
Fax +49 6106 841-111
[email protected]
www.red-elektromechanik.de
Hamburg
Breuell + Hilgenfeldt GmbH
Oststraße 96
22844 Norderstedt
GERMANY
Phone +49 40 538092-20
Fax +49 40 538092-84
[email protected]
Munich
A. Schweiger GmbH
Ohmstraße 1
82054 Sauerlach
GERMANY
Phone +49 8104 897-0
Fax +49 8104 897-90
[email protected]
www.schweiger-gmbh.com
(1 to 5 pieces)
North
Breuell + Hilgenfeldt GmbH
Oststraße 96
22844 Norderstedt
GERMANY
Phone +49 40 538092-20
Fax +49 40 538092-84
[email protected]
South
HDS Ventilatoren Vertriebs GmbH
Glaswiesenstraße 1
74677 Dörzbach
GERMANY
Phone +49 7937 80355-20
Fax +49 7937 80355-25
[email protected]
www.hds-gmbh.net
motor agent
Information
Hungary
ebm-papst Industries Kft.
Ezred u. 2.
1044 Budapest
HUNGARY
Phone +36 1 8722-190
Fax +36 1 8722-194
offi[email protected]
AuBren Limited
Portlaoise Business & Technology Park
Mountrath Road
Portlaoise, Co. Laois
IRELAND
Phone +353 57 8664343
Fax +353 57 8664346
[email protected]
www.aubren.com
Finland
ebm-papst Oy
Puistotie 1
02760 Espoo
FINLAND
Phone +358 9 887022-0
Fax +358 9 887022-13
[email protected]fi
www.ebmpapst.fi
Croatia
ebm-papst Industries Kft.
Ezred u. 2.
1044 Budapest
HUNGARY
Phone +36 1 8722-190
Fax +36 1 8722-194
offi[email protected]
Italy
ebm-papst Srl
Via Cornaggia 108
22076 Mozzate (Co)
ITALY
Phone +39 0331 836201
Fax +39 0331 821510
[email protected]
www.ebmpapst.it
France
ebm-papst sarl
Parc d’Activités Nord
1 rue Mohler – BP 62
67212 Obernai Cedex
FRANCE
Phone +33 820 326266
Fax +33 3 88673883
[email protected]
www.ebmpapst.fr
fan agent
compact fan agent
EC centrifugal fans - RadiCal
backward-curved
Ireland
ebm-papst UK Ltd.
Chelmsford Business Park
Chelmsford Essex CM2 5EZ
UNITED KINGDOM
Phone +44 1245 468555
Fax +44 1245 466336
[email protected]
www.ebmpapst.co.uk
Estonia
ebm-papst Oy, Eesti Filiaal
Kesk tee 13
Aaviku küla, Jüri Tehnopark
75301 Rae Vald, Harjumaa
ESTONIA
Phone +372 65569-78
Fax +372 65569-79
www.ebmpapst.ee
Bulgaria
ebm-papst Romania S.R.L.
Str. Tarnavei No. 20
500327 Brasov
ROMANIA
Phone +40 268 331859
Fax +40 268 312805
[email protected]
EC axial fans
"Basic"
Iceland
RJ Engineers
Stangarhyl 1a
110 Reykjavik
ICELAND
Phone +354 567 8030
Fax +354 567 8015
[email protected]
www.rj.is
Denmark
ebm-papst Denmark ApS
Vallensbækvej 21
2605 Brøndby
DENMARK
Phone +45 43 631111
Fax +45 43 630505
[email protected]
www.ebmpapst.dk
Belgium
ebm-papst Benelux B.V.
Sales office Belgium-Luxemburg
Romeinsestraat 6/0101
Research Park Haasrode
3001 Heverlee-Leuven
BELGIUM
Phone +32 16 396-200
Fax +32 16 396-220
[email protected]
www.ebmpapst.be
EC axial fans
"Premium & Power"
Czech Republic / Slovakia
ebm-papst CZ s.r.o.
Kaštanová 34a
620 00 Brno
CZECH REPUBLIC
Phone +420 544 502-411
Fax +420 547 232-622
[email protected]
www.ebmpapst.cz
motor specialist
motor agent
Technology
Belarus
ebm-papst Bel AgmbH
Lipkovskaya Gasse 34
Office No.6, Room 106,107
223010 Minsk
BELARUS
Phone +375 17 3851556
Fax +375 17 3851556
[email protected]
www.ebmpapst.by
Greece
Helcoma
E. Rota and Co. OE
Davaki 65
17672 Kallithea-Attiki
GREECE
Phone +30 210 9513-705
Fax +30 210 9513-490
[email protected]
www.helcoma.gr
79
Agents
Austria
ebm-papst Motoren & Ventilatoren GmbH
Straubingstraße 17
4030 Linz
AUSTRIA
Phone +43 732 321150-0
Fax +43 732 321150-20
[email protected]
www.ebmpapst.at
Cyprus
Helcoma
E. Rota and Co. OE
Davaki 65
17672 Kallithea-Attiki
GREECE
Phone +30 210 9513-705
Fax +30 210 9513-490
[email protected]
www.helcoma.gr
2015-10
Europe
EC dual centrifugal fans
with housing "Basic"
EC dual centrifugal fans
with housing "Premium"
ebm-papst in Europe
ebm-papst in Europe
Macedonia
ebm-papst Industries Kft.
Ezred u. 2.
1044 Budapest
HUNGARY
Phone +36 1 8722-190
Fax +36 1 8722-194
offi[email protected]
Romania
ebm-papst Romania S.R.L.
Str. Tarnavei Nr. 20
500327 Brasov
ROMANIA
Phone +40 268 331859
Fax +40 268 312805
[email protected]
Netherlands
ebm-papst Benelux B.V.
Polbeemd 7 - 5741 TP Beek en Donk
P.O. Box 140 - 5740 AC Beek en Donk
NETHERLANDS
Phone +31 492 502-900
Fax +31 492 502-950
[email protected]
www.ebmpapst.nl
Russia
ebm-papst Ural GmbH
Posadskaja-Strasse, 23(E), 3
620102 Ekaterinburg
RUSSIA
Phone +7 343 2338000
Fax +7 343 2337788
[email protected]
www.ebmpapst.ur.ru
ebm-papst Heating Systems B.V.
Van Veldekekade 360
5216 KT ‘s-Hertogenbosch
NETHERLANDS
Phone +31 73 648 89 00
Fax +31 73 648 89 11
[email protected]
www.ebmpapst-hs.nl
ebm-papst Rus GmbH
proezd 4529, vladenie 5, stroenie 1
141000 Mytistschi, Oblast Moskau
RUSSIA
Phone +7 495 9807524
Fax +7 495 5140924
[email protected]
www.ebmpapst.ru
Serbia & Montenegro
ebm-papst Industries Kft.
Ezred u. 2.
1044 Budapest
HUNGARY
Phone +36 1 8722-190
Fax +36 1 8722-194
offi[email protected]
Norway
ebm-papst AS
P.B. 173 Holmlia
1203 Oslo
NORWAY
Phone +47 22 763340
Fax +47 22 619173
[email protected]
www.ebmpapst.no
Poland
ebm-papst Polska Sp. z o.o.
ul. Annopol 4A
03236 Warszawa
POLAND
Phone +48 22 6757819
Fax +48 22 6769587
offi[email protected]
www.ebmpapst.pl
2015-10
Portugal
ebm-papst (Portugal), Lda.
Centro Empresarial de Alverca
Rua de Adarse, Vale D’Ervas
Corpo D / Fracção 3
2615-178 Alverca do Ribatejo
PORTUGAL
Phone +351 218 394 880
Fax +351 218 394 759
[email protected]
www.ebmpapst.pt
80
fan agent
Spain
ebm-papst Ibérica S.L.
Avda. del Sistema Solar, 29
28830 San Fernando de Henares (Madrid)
SPAIN
Phone +34 91 6780894
Fax +34 91 6781530
[email protected]
www.ebmpapst.es
Sweden
ebm-papst AB
Äggelundavägen 2
17562 Järfälla
SWEDEN
Phone +46 10 4544400
Fax +46 8 362306
[email protected]
www.ebmpapst.se
compact fan agent
motor specialist
Switzerland
ebm-papst AG
Rütisbergstrasse 1
8156 Oberhasli
SWITZERLAND
Phone +41 44 73220-70
Fax +41 44 73220-77
[email protected]
www.ebmpapst.ch
Turkey
Akantel Elektronik San. Tic. LTD. Sti.
Atatürk Organize Sanayi
Bölgesi 10007 SK. No.:6
35620 Cigli-Izmir
TURKEY
Phone +90 232 3282090
Fax +90 232 3280270
[email protected]
www.ebmpapst.com.tr
Ukraine
ebm-papst Ukraine LLC
Lepse Boulevard, 4, Building 21
03067 Kiev
UKRAINE
Phone +38 044 2063091
Fax +38 044 2063091
[email protected]
www.ebmpapst.ua
United Kingdom
ebm-papst UK Ltd.
Chelmsford Business Park
Chelmsford Essex CM2 5EZ
UNITED KINGDOM
Phone +44 1245 468555
Fax +44 1245 466336
[email protected]
www.ebmpapst.co.uk
ebm-papst Automotive & Drives (UK) Ltd.
The Smithy
Fidlers Lane
East Ilsley, Berkshire RG20 7LG
UNITED KINGDOM
Phone +44 1635 2811-11
Fax +44 1635 2811-61
A&[email protected]
www.ebmpapst-ad.com
motor agent
Information
Argentina
ebm-papst de Argentina S.A.
Hernandarias 148 Lomas del Mirador
Pcia. de Buenos Aires (1752)
ARGENTINA
Phone +54 11 46576135
Fax +54 11 46572092
[email protected]
www.ebmpapst.com.ar
Brasil
ebm-papst Motores Ventiladores Ltda.
Av. José Giorgi, 301 Galpões B6+B7
Condominio Logical Center
06707-100 Cotia - São Paulo
BRAZIL
Phone +55 11 4613-8700
Fax +55 11 4777-1456
[email protected]
www.ebmpapst.com.br
Africa
USA
ebm-papst Inc.
P.O. Box 4009
100 Hyde Road
Farmington, CT 06034
UNITED STATES
Phone +1 860 674-1515
Fax +1 860 674-8536
[email protected]
www.ebmpapst.us
South Africa
ebm-papst South Africa (Pty) Ltd.
P.O. Box 3124
1119 Yacht Avenue
2040 Honeydew
SOUTH AFRICA
Phone +27 11 794-3434
Fax +27 11 794-5020
[email protected]
www.ebmpapst.co.za
ebm-papst Automotive & Drives, Inc.
3200 Greenfield, Suite 255
Dearborn, MI 48120
UNITED STATES
Phone +1 313 406-8080
Fax +1 313 406-8081
[email protected]
www.ebmpapst-automotive.us
EC axial fans
"Premium & Power"
America
EC dual centrifugal fans
with housing "Basic"
EC dual centrifugal fans
with housing "Premium"
ebm-papst in America and Africa
EC axial fans
"Basic"
Canada
ebm-papst Canada Inc.
1800 Ironstone Manor, Unit 2
Pickering, Ontario, L1W3J9
CANADA
Phone +1 905 420-3533
Fax +1 905 420-3772
[email protected]
www.ebmpapst.ca
compact fan agent
motor specialist
motor agent
81
Agents
fan agent
2015-10
Technology
EC centrifugal fans - RadiCal
backward-curved
Mexico
ebm Industrial S. de R.L. de C.V.
Paseo de Tamarindos 400-A-5to Piso
Col. Bosques de las Lomas
Mexico 05120, D.F.
MEXICO
Phone +52 55 3300-5144
Fax +52 55 3300-5243
[email protected]
www.ebmpapst.com.mx
ebm-papst in Asia
Asia
China
ebm-papst Ventilator (Shanghai) Co., Ltd.
No. 418, Huajing Road
WaiGaoQiao Free Trade Zone
No. 2001, Yang Gao (N) Road
200131 Shanghai
P.R. of CHINA
Phone +86 21 5046-0183
Fax +86 21 5046-1119
[email protected]
www.ebmpapst.com.cn
2015-10
Hong Kong
ebm-papst Hong Kong Ltd.
Room 17E, MG Tower
133 Hoi Bun Road, Kwun Tong
Hong Kong
P.R. of CHINA
Phone +852 2145-8678
Fax +852 2145-7678
[email protected]
Japan
ebm-papst Japan K.K.
Attend on Tower 13F
Shinyokohama 2-8-12, Kohoku-ku
222-0033 Yokohama-City, Kanagawa
JAPAN
Phone +81 45 47057-51
Fax +81 45 47057-52
[email protected]
www.ebmpapst.jp
Korea
ebm-papst Korea Co. Ltd.
6F, Trutec Bldg.
12, WorldCupbuk-ro 56-gil
Mapo-Gu
Seoul 121-835
KOREA
Phone +82 2 366213-24
Fax +82 2 366213-26
[email protected]
www.ebmpapst.co.kr
India
ebm-papst India Pvt. Ltd.
26/3, G.N.T. Road, Erukkencherry
Chennai-600118
INDIA
Phone +91 44 25372556
Fax +91 44 25371149
[email protected]
www.ebmpapst.in
Malaysia
ebm-papst Malaysia
Representative Office
Unit 12-2, Jalan USJ Sentral 3
Persiaran Subang, Selangor Darul Ehsan
47600 Subang Jaya
MALAYSIA
Phone +60 3 8024-1680
Fax +60 3 8024-8718
[email protected]
Indonesia
ebm-papst Indonesia
Representative Office
German Centre, 4th Floor, Suite 4470
Jl. Kapt. Subijono Dj. Bumi Serpong Damai
15321 Tangerang
INDONESIA
Phone +62 21 5376250
Fax +62 21 5388305
[email protected]
Philippines
ebm-papst SEA Pte. Ltd.
Representative Office (Philippines)
ALPAP II Building
Trade Street Corner Investment Drive
Unit 1101 Madrigal Business Park
1799 Ayala Alabang / Muntinlupa City
Telefon: +63 02 8042747
Telefax: +63 02 8042757
[email protected]
Israel
Polak Bros. Import Agencies Ltd.
9 Hamefalsim Street
Kiryat Arie, Petach-Tikva 49514
ISRAEL
Phone +972 3 9100300
Fax +972 3 5796679
[email protected]
www.polak.co.il
Singapore
ebm-papst SEA Pte. Ltd.
No. 23 Ubi Road 4
#06-00 Olympia Industrial Building
Singapore 408620
SINGAPORE
Phone +65 65513789
Fax +65 68428439
[email protected]
fan agent
compact fan agent
motor specialist
Taiwan
ETECO Engineering & Trading Corp.
10F-I, No. 92, Teh-Wei Str.
Tsow-Inn District, Kaohsiung
TAIWAN
Phone +886 7 557-4268
Fax +886 7 557-2788
[email protected]
www.ebmpapst.com.tw
Thailand
ebm-papst Thailand Co., Ltd.
99/9 Moo 2, Central Chaengwattana Tower
14th Floor, Room 1402
Chaengwattana Road Bangtarad, Pakkret
11120 Nonthaburi
THAILAND
Phone +66 2 8353785-7
Fax +66 2 8353788
[email protected]
United Arab Emirates
ebm-papst Middle East FZE
PO Box 17755
Jebel Ali Free Zone / FZS1 / AP05
Dubai
UNITED ARAB EMIRATES
Phone +971 4 88608-26
Fax +971 4 88608-27
[email protected]
www.ebmpapst.ae
Vietnam
ebm-papst SEA Pte. Ltd.
Representative Office
Room 402, 4th Floor, Sai Gon 3 Building
140 Nguyen Van Thu, District 1
Ho Chi Minh City
VIETNAM
Phone +84 8 39104099 / 39103969
Fax +84 8 39103970
[email protected]
motor agent
Information
EC dual centrifugal fans
with housing "Basic"
EC dual centrifugal fans
with housing "Premium"
ebm-papst in Oceania
Oceania
EC axial fans
"Premium & Power"
Australia
ebm-papst A&NZ Pty Ltd.
10 Oxford Road
Laverton North, Victoria, 3026
AUSTRALIA
Phone +61 3 9360-6400
Fax +61 3 9360-6464
[email protected]
www.ebmpapst.com.au
compact fan agent
motor specialist
motor agent
83
Agents
fan agent
2015-10
Technology
EC centrifugal fans - RadiCal
backward-curved
EC axial fans
"Basic"
New Zealand
ebm-papst A&NZ Pty Ltd.
61 Hugo Johnston Drive, Unit H
Penrose 1061, Auckland
NEW ZEALAND
PO Box 112278,
Penrose 1642, Auckland
Phone +64 9 525-0245
Fax +64 9 525-0246
[email protected]
www.ebmpapst.com.au
www.ebmpapst.com
ebm-papst
Mulfingen GmbH & Co. KG
Bachmühle 2
74673 Mulfingen
Germany
Phone +49 7938 81-0
Fax +49 7938 81-110
[email protected]
37659-7-8811 · 2015-10 · KH-2’
Printed in Germany
Similar pages