DC axial fans 2016 01 EN

25
Representatives
Accessories
AC centrifugal fans
AC axial fans
ACmaxx / EC fans
DC fans - specials
DC centrifugal fans
DC axial fan overview
DC axial fan / DC diagonal fan
2016-01
DC axial fans
DC axial fans
27
31
Information
DC axial fans
Technical information
Product line
Voltage range
ebm-papst offers you the widest full product line of DC axial and diagonal
Many of our DC fans can be operated on voltages that are up to 50%
fans from 25 mm to 280 mm in size. Every single type of fan can be
lower and 25% higher than their nominal voltage (see voltage range in
optimally integrated in the respective device concept. The highly
the technical tables). This allows the air performance to be adapted to the
economical brushless motor technology of these fans provides a unique
cooling requirements and the noise to be reduced, even if the fan does
variety of intelligent innovations at prices that would have been
not have a control input.
unthinkable a few years ago.
Closed-loop speed control and monitoring
Electronic protection against reverse polarity
Closed-loop speed control and function monitoring are becoming
ebm-papst DC fans have electronically commutated drives with electronic
increasingly important in many applications. ebm-papst offers many fans
protection against reverse polarity. The electronics are integrated in the
in the standard design with a control input and open-collector speed
fan’s impeller hub to save space.
signal.
Product life expectancy
S-Force
A distinctive feature of DC fan technology is the amazing product life
The new S-Force fans with their extremely high blower capacity of up to
expectancy. The outstanding efficiency of the brushless drive results in
1100 m3/h and pressure increase of up to 1400 pascals are capable of
lower heat stress for the bearings, which significantly increases the
dealing with the extreme heat load. If needed, these fans can produce up
service life of the fan.
to 100% more output under full load, and they work with a much broader
delivery bandwidth than current models. This makes them ideal for
Degree of protection
equipment and systems with a high density of components. Thanks to
DC fans with sleeve and ball bearings are powered by class E insulated
intelligent motor features, they can be adapted individually for any
motors. All ebm-papst fans conform to the requirements of degree of
application. S-Force fans are available in standard dimensions. The air
protection IP 20. Fans conforming to IP 54 / IP 68 and special degrees of
flow rate is amazing!
protection are also available.
S-Panther
S-Panther power delivered quietly. Wherever there is need for power
and reduced noise, fans from the S-Panther range are the right
solution. A strong pressure saddle curve at optimum air flow provides
2016-01
the power of a real big cat, an S-Panther.
26
2.3...4.6
6...9
10...13.5
24...38
11...20
19...33
21...67
40...58
21...56
16...41
70...82
28...44
32...117
33...79
20...58
32...80
132...222
61...102
44...84
56...133
130...280
145...270
94...170
91
200...225
95...204
65...170
Information
Page
30
40
50
60
70 80 90 100
200
300
400
500 600 700 800 900 1000
2000 2500
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
NEW
DC centrifugal fans
250
400 F
400
420 J
500 F
600 F
620
630
600 N
600 N VARIOFAN
600 J
700 F
8450
8400 N
8400 N VARIOFAN
8300
8200 J
3400 N
3400 N VARIOFAN
3300 N
3200 J
3250 J
4400 F
4400 F
4400 FN
4300
4300 VARIOFAN
20
DC fans - specials
25 x 8
40 x 10
c 40 x 20
c 40 x 28
c 50 x 15
c 60 x 15
c 60 x 25
c 60 x 25
c 60 x 25
c 60 x 25
c 60 x 32
c 70 x 15
c 80 x 25
c 80 x 25
c 80 x 25
c 80 x 32
c 80 x 38
c 92 x 25
c 92 x 25
c 92 x 32
c 92 x 38
c 92 x 38
c 119 x 25
Ø 127
c 119 x 25
c 119 x 32
c 119 x 32
c
10
ACmaxx / EC fans
m3/h
mm
c
Air flow
Series
Dimension
Overview of air performance
DC axial fans
Axial fans for DC operation
Subject to change
50
60
70 80 90 100
200
300
400
500 600 700 800 900 1000
2000 2500
AC axial fans
40
AC centrifugal fans
30
Accessories
20
27
Representatives
10
2016-01
m3/h
Axial fans for DC operation
m3/h
mm
c
119 x 38
119 x 38
c 119 x 38
c 119 x 38
c 119 x 38
c 127 x 38
c 127 x 38
c 135 x 38
c 140 x 51
c 140 x 51
Ø 150 x 38
Ø 150 x 55
172 x 150 x 51
172 x 150 x 51
172 x 160 x 51
172 x 160 x 51
172 x 160 x 51
Ø 172 x 51
Ø 172 x 51
Ø 172 x 51
Ø 172 x 51
Ø 172 x 51
220x200x51
c 225 x 80
c 225 x 89
Ø 250
Ø 300
c
4400
4100 N
4100 NHH..NH6
4100 NH7..NH8
DV 4100
5200 N
DV 5200
5100 N
5300
5300 TD
7100 N
7200 N
6400
6400 TD
DV 6400
DV 6400 TD
6300 TD
6300 N
6300 NTD
6300
6300 TD
DV 6300 TD
2200 FTD
K1G 200
K3G 200
W1G 250
*1G 300
Page
Air flow
Series
Dimension
Overview of air performance
10
20
30
40
50
60
70 80 90 100
200
300
400
500 600 700 800 900 1000
2000 2500
100...285
160...237
260...440
500...570
280
187...340
270...320
260
340
410...670
308...360
360
350...480
90...900
530
100...680
710...930
540...685
970...1030
395...545
600...930
630...1100
790...1220
1020...1245
725...1650
2070
2320...2345
58/59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
84
86
88
Subject to change
2016-01
m3/h
28
10
20
30
40
50
60
70 80 90 100
200
300
400
500 600 700 800 900 1000
2000 2500
Information
Axial fans for DC operation
ation
f rot
•
–
–
–
–
–
–
• – – – –
31
c
40 x 10
400 F
yes
•
• –
–
–
– – –
• – – – –
32
c
40 x 20
400
yes
•
• –
–
–
• – –
• – – – –
33
c
40 x 28
420 J
yes
•
• –
• –
• – –
• – – • –
34
c
50 x 15
500 F
yes
•
• –
–
–
• – –
• – – – –
35
c
60 x 15
600 F
yes
•
• –
–
–
• – –
• – – – –
36
c
60 x 25
620
yes
•
• •
• •
• • –
• – – – –
37
c
60 x 25
630
yes
•
• •
• –
• • –
• • • • –
38
c
60 x 25
600 N
yes
/
•
• –
–
–
–
–
–
• • • – –
39
c
60 x 25
600 N VARIOFAN
yes
/
•
• –
• •
–
–
–
• – – – –
40
c
60 x 32
600 J
yes
•
• –
• –
• • –
• – – – –
41
c
70 x 15
700 F
yes
•
• –
–
–
–
• – – – –
42
c
80 x 25
8450
yes
/
•
• •
• •
• • –
• – – – –
43
c
80 x 25
8400 N
yes
/
•
• •
• •
• • –
• • • – –
44
c
80 x 25
8400 N VARIOFAN
yes
•
• –
• •
–
–
• – – – –
45
c
80 x 32
8300
yes
•
• •
• •
• • –
• • • • –
46
c
80 x 38
8200 J
yes
•
• •
• •
• • –
• • – – –
47
c
92 x 25
3400 N
yes
•
• •
• •
• • –
• • • – –
48
c
92 x 25
3400 N VARIOFAN
yes
•
• –
• •
–
–
• – – – –
49
c
92 x 38
3300 N
yes
•
• –
• •
• • –
• • • • –
50
c
92 x 38
3200 J
yes
•
• •
• •
• • –
• • • – –
51
c
92 x 38
3250 J
yes
•
• –
• •
• • –
• • • • –
52
c
119 x 25
53
NEW Ø 172
OPTIONAL
/
–
–
–
–
–
P.
4400 F
yes
•
• •
• •
• • –
• – – – –
4400 F
yes
•
• •
• •
• • –
• – – – •
54
yes
•
• •
• •
• • –
• – – – –
55
•
• •
• •
• • –
• • • • –
56
•
• •
• •
• • –
• – – – –
57
c
119 x 25
4400 FN
c
119 x 32
4300
yes
c
119 x 32
4300 VARIOFAN
yes
/
/
DC centrifugal fans
yes
Please consult your customer support representative about
the feasibility of your special variant.
DC fans - specials
250
ACmaxx / EC fans
Series
c 25 x 8
AC axial fans
mm
Please note that these special versions are not possible for
all voltages and speeds, and not in all combinations. The
special versions are designed for specific customers and
projects. As a rule, they are not available off the shelf and
are based on minimum quantities.
Subject to change
Accessories
AC centrifugal fans
Sleeve bearings
Ball bearings
29
2016-01
– not yet available
• Available
Representatives
Axial fans
DC axial fans
Salt
spra
y pro
Reve
tectio
rsible
n
direc
Page
tion
o
VDE
, UL,
o/N
oG
Alarm o alarm
with
spee
d lim
Exte
rnal
it
temp
Inter
eratu
nal t
re se
emp
nso
eratu
PWM
re se r
con
nsor
Analo trol inpu
t
g co
ntro
l inp
Mult
ut
i-op
tions
cont
rol in
Mois
put
ture
prot
IP >
e
c
tion
= 54
IP 68
CSA
n
ensio
Dim
SINT
EC s
leeve
beari
ngs
Spee
/ ball
d sig
beari
nal
ngs
G
Overview of technically feasible designs
Axial fans for DC operation
ation
f rot
Salt
spra
y pro
Reve
tectio
rsible
n
direc
Page
tion
o
VDE
, UL,
o/N
oG
Alarm o alarm
with
spee
d lim
Exte
rnal
it
temp
Inter
eratu
nal t
r
e
emp
sens
eratu
PWM
o
re se r
con
nsor
Analo trol inpu
t
g co
ntro
l inp
Mult
ut
i-op
tions
cont
rol in
Mois
put
ture
prot
IP >
e
c
t
ion
= 54
IP 68
CSA
n
ensio
Dim
SINT
EC s
leeve
beari
ngs
Spee
/ ball
d sig
beari
nal
ngs
G
Overview of technically feasible designs
Axial fans
mm
Series
c
119 x 38
4400
ja
OPTIONAL
c
119 x 38
4100 N
ja
c
119 x 38
4100 NH..NH6
ja
c
119 x 38
4100 NH7..NH8
c
119 x 38
DV 4100
c
127 x 38
c
127 x 38
c
135 x 38
c
140 x 51
c
140 x 51
• •
• •
• • –
• • – – –
58/59
•
• •
• •
• • –
• • • • –
60
•
• •
• •
• • –
• • • • –
61
ja
•
• •
• •
• • –
• – – • –
62
ja
•
• •
• •
• • –
• • • • –
63
5200 N
ja
•
• •
• •
• • –
• • • • –
64
DV 5200
ja
•
• •
• •
• • –
• • – • –
65
5100 N
ja
•
• •
• •
• • –
• • – • –
66
5300
ja
•
• •
• •
• • –
• • – • –
67
5300 TD
ja
•
• •
• •
• • •
• • – • –
68
Ø 150 x 38
7100 N
ja
•
• •
• •
• • –
• • • • –
69
Ø 150 x 55
7200 N
ja
•
• •
• •
• • –
• • • • –
70
172 x 150 x 51
6400
ja
•
• •
• •
• • –
• • – • –
71
172 x 150 x 51
6400 TD
ja
•
• •
• •
• • –
• • – • •
72
172 x 150 x 51
DV 6400
ja
•
• •
• •
• • –
• • – • –
73
172 x 150 x 51
DV 6400 TD
ja
•
• •
• •
• • –
• • – • •
74
172 x 160 x 51
6300 TD
ja
•
• •
• •
• • •
• • – • –
75
/
Ø 172 x 51
6300 N
ja
•
• •
• •
• • •
• • • • –
76
Ø 172 x 51
6300 NTD
ja
•
• •
• •
• • •
• • – • –
77
Ø 172 x 51
6300
ja
•
• •
• •
• • –
• • – • –
78
Ø 172 x 51
6300 TD
ja
•
• •
• •
• • •
• • – • –
79
Ø 172 x 51
DV 6300 TD
ja
•
• •
• •
• • •
• • – • –
80
Ø 200 x 51
2200 FTD
ja
•
• •
• •
• • •
• • – • –
81
c
225 x 80
K1G 200
ja
•
• •
• –
• • •
• – – • –
82
c
225 x 89
K3G 200
ja
•
• •
• –
• • •
• – – • –
84
Subject to alterations
2016-01
– not yet available
• Available
30
P.
•
Sleeve bearings
Ball bearings
Please note that these special versions are not possible for
all voltages and speeds, and not in all combinations. The
special versions are designed for specific customers and
projects. As a rule, they are not available off the shelf and
are based on minimum quantities.
Please consult your customer support representative about
the feasibility of your special variant.
Information
4.6 m /h
DC axial fans
3
 25 x 8 mm
–
–
DC centrifugal fans
–
–
DC axial fans
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Moisture protection
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 28,
TR 64
Weight:
5g
– Material:
cfm
VDC
VDC
255 M
2.3
1.2
5
4.5...5.5
5
<3
0.2
6 500
-10...+70
45 000 / 17 500
47 500
255 N
3.5
1.9
5
4.5...5.5
16
<3
0.4
9 600
-10...+70
40 000 / 15 000
42 500
255 H
4.6
2.6
5
4.5...5.5
23
4.4
0.6
12 000
-10...+55
35 000 / 15 000*
37 500
252 N
3.4
1.9
12
10...14
15
<3
0.5
9 000
-10...+70
40 000 / 15 000
42 500
252 H
4.6
2.6
12
10...14
23
4.4
0.7
12 000
-10...+55
35 000 / 15 000*
37 500
dB(A) Bel(A)
Hours
Hours
DC fans - specials
m3/h
¿
¡
¬
¡
¬
ACmaxx / EC fans
Type
Nominal data
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (60 °C)
ebm-papst standard
Service life L10 (20 °C)
ebm-papst standard
Temperature range
Power consumption
Nominal speed
Sintec sleeve bearings
Ball bearings
Sound power level
°C
Voltage range
rpm-1
Nominal voltage
Watts
Air flow
/
Air flow
Series 250
Sound pressure level
1) Fiberglass-reinforced plastic
Subject to change
Finger guards
from p. 242
Tin-p
la
ted
31
2016-01
Air performance measured as per: ISO 5801.
Installation category A, without accidental contact.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Accessories
AC centrifugal fans
AC axial fans
* at 55 °C
Representatives
Max.
Max.
9 m /h
DC axial fans
3
 40 x 10 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 28,
TR 64
Highlights:
Some models are suitable
for use at high ambient
temperatures
Weight:
17 g
– Material:
–
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Moisture protection
Hours
5 400
-20...+70
45 000 / 17 500
47 500
6 000
-20...+70
45 000 / 17 500
47 500
0.5
4 300
-20...+70
45 000 / 17 500
47 500
0.7
5 400
-20...+70
45 000 / 17 500
47 500
4.6
0.8
6 000
-20...+70
45 000 / 17 500
47 500
22.1
4.4
0.8
5 400
-20...+70
45 000 / 17 500
47 500
26.0
4.4
0.9
6 000
-20...+70
45 000 / 17 500
47 500
Air flow
Nominal voltage
Voltage range
m3/h
cfm
VDC
VDC
405 F
8
4.7
5
4.5...5.5
22.1
4.4
0.7
405 FH
9
5.3
5
4.5...5.5
26.0
4.6
0.9
412 FM
6
3.5
12
10...14
17.0
3.8
412 F
8
4.7
12
10...14
22.1
4.4
412 FH
9
5.3
12
10...14
26.0
414 F
8
4.7
24
20...28
414 FH
9
5.3
24
21.6...26.4
dB(A) Bel(A)
Hours
Model with temperature range up to +85 °C.
412 FM-074
6
3.5
12
10...14
17.0
3.8
0.4
4 300
-20...+85
45 000 / 17 500
47 500
412 F-130
8
4.7
12
10...14
22.1
4.4
0.6
5 400
-20...+85
45 000 / 17 500
47 500
412 FH-132
9
5.3
12
10...14
26.0
4.6
0.8
6 000
-20...+85
45 000 / 17 500
47 500
Subject to change
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
32
Finger guards
from p. 242
Tin-p
la
ted
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (60 °C)
ebm-papst standard
°C
Type
Nominal data
Service life L10 (20 °C)
ebm-papst standard
rpm-1
Sound power level
Temperature range
Power consumption
Watts
Nominal speed
Sintec sleeve bearings
Ball bearings
/
Air flow
Series 400 F
Sound pressure level
1) Fiberglass-reinforced plastic
¡
¬
¿
¡
¬
¡
¬
¿
¡
¬
Information
13.5 m /h
DC axial fans
3
 40 x 20 mm
–
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- PWM control input
- Moisture protection
DC axial fans
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 28,
TR 64
Highlights:
Some models are suitable
for use at high ambient
temperatures
Weight:
27 g
– Material:
DC centrifugal fans
Max.
-20...+70
50 000 / 20 000
52 500
0.8
6 000
-20...+70
50 000 / 20 000
52 500
4.7
1.6
8 100
-20...+60
45 000 / 17 500
47 500
Air flow
Nominal voltage
Voltage range
VDC
VDC
405
10.0
5.9
5
4.5...5.5
18
3.8
0.9
412
10.0
5.9
12
10...14
18
3.8
412 H
13.5
7.9
12
10...14
29
dB(A) Bel(A)
Hours
¿
¿
¡
414
10.0
5.9
24
20...28
18
3.8
1.0
6 000
-20...+70
50 000 / 20 000
52 500
414 H
13.5
7.9
24
20...26.5
29
4.7
1.7
8 100
-20...+60
45 000 / 17 500
47 500
¿
¡
12
10...14
18
3.8
0.8
6 000
-20...+85
50 000 / 20 000
52 500
¿
Model with temperature range up to +85 °C.
412-099
10.0
5.9
DC fans - specials
6 000
cfm
ACmaxx / EC fans
Hours
m3/h
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (60 °C)
ebm-papst standard
°C
Type
Nominal data
Service life L10 (20 °C)
ebm-papst standard
rpm-1
Sound power level
Temperature range
Power consumption
Watts
Nominal speed
Sintec sleeve bearings
Ball bearings
/
Air flow
Series 400
Sound pressure level
1) Fiberglass-reinforced plastic
ted
33
Representatives
Finger guards
from p. 242
Tin-p
la
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Accessories
AC centrifugal fans
AC axial fans
Subject to change
Max.
38 m /h
DC axial fans
3
 40 x 28 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 28,
UL 1061
Weight:
45 g
– Material:
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- External temperature sensor
- PWM control input
- Moisture protection
- Salt spray protection
m3/h
cfm
VDC
VDC
422 JM
24
14.2
12
8...13.8
42
5.5
2.4
11 400
-20...+70
75 000 / 37 500
127 500
422 JN
31
18.3
12
8...13.8
48
6.0
4.1
14 250
-20...+70
67 500 / 35 000
115 000
422 JH
38
22.4
12
8...13.8
54
6.6
6.9
17 250
-20...+70
60 000 / 30 000
102 500
424 JM
24
14.2
24
16...28
42
5.5
2.7
11 400
-20...+70
75 000 / 37 500
127 500
424 JN
31
18.3
24
16...28
48
6.0
4.3
14 250
-20...+70
67 500 / 35 000
115 000
424 JH
38
22.4
24
16...26.4
54
6.6
6.9
17 250
-20...+65
60 000 / 32 500
102 500
Nominal data
Type
dB(A) Bel(A)
Hours
Hours
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption
Nominal speed
Sintec sleeve bearings
Ball bearings
Sound power level
°C
Voltage range
rpm-1
Nominal voltage
Watts
Air flow
/
Air flow
Series 420 J
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
¬
¿
¡
¬
Subject to change
Tin-plated
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
34
Finger guards
from p. 242
Ø 42,5 ± 0,3
Information
20 m /h
DC axial fans
3
 50 x 15 mm
–
–
–
DC axial fans
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- PWM control input
- Moisture protection
DC centrifugal fans
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 28,
TR 64
Highlights:
Some models are suitable
for use at high ambient
temperatures
Weight:
27 g
– Material:
52 500
0.9
5 000
-20...+70
50 000 / 20 000
52 500
VDC
512 F
20
11.8
12
10.8...13.2
30
4.5
0.8
514 F
20
11.8
24
21.6...26.4
30
4.5
Hours
Model with temperature range up to +85 °C.
512 FL-547
11
6.5
12
10.2...13.8
18
3.7
0.4
3 000
-20...+85
50 000 / 20 000
52 500
512 F-532
20
11.8
12
10.8...13.2
30
4.5
0.9
5 000
-20...+85
50 000 / 20 000
52 500
DC fans - specials
50 000 / 20 000
VDC
¡
¡
¿
¡
ACmaxx / EC fans
-20...+70
cfm
Curve
Life expectancy L10IPC
(40 °C) see page 17
5 000
m3/h
dB(A) Bel(A)
Service life L10 (60 °C)
ebm-papst standard
Hours
Type
Nominal data
Service life L10 (20 °C)
ebm-papst standard
Temperature range
Power consumption
°C
Voltage range
rpm-1
Nominal voltage
Nominal speed
Sintec sleeve bearings
Ball bearings
Watts
Air flow
Sound power level
/
Air flow
Series 500 F
Sound pressure level
1) Fiberglass-reinforced plastic
AC centrifugal fans
AC axial fans
Subject to change
ted
Accessories
Tin-p
la
Finger guards
from p. 242
35
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration, the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Representatives
Max.
Max.
33 m /h
DC axial fans
3
 60 x 15 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 28,
TR 64
Highlights:
Some models are suitable
for use at high ambient
temperatures
Weight:
30 g
– Material:
–
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- PWM control input
- Moisture protection
Hours
4 000
-20...+50
50 000 / 20 000
52 500
0.4
2 650
-20...+70
50 000 / 20 000
52 500
4.4
1.0
3 900
-20...+70
50 000 / 20 000
52 500
4.8
1.5
4 500
-20...+60
45 000 / 17 500
47 500
27
4.4
1.1
3 900
-20...+70
50 000 / 20 000
52 500
16...28
31
4.8
1.4
4 500
-20...+60
45 000 / 17 500
47 500
Air flow
Nominal voltage
Voltage range
m3/h
cfm
VDC
VDC
605 F
29
17.1
5
4.5...5.2
27
4.4
1.1
612 FL
19
11.2
12
11.5...13.2
16
3.6
612 F
29
17.1
12
10.8...13.2
27
612 FH
33
19.4
12
10.0...13.2
31
614 F
29
17.1
24
21.6...26.4
614 F/39 H-691
33
19.4
24
dB(A) Bel(A)
Hours
Model with temperature range up to +80 / 85 °C.
612 FL-680
19
11.2
12
11.5...14
16
3.6
0.5
2 650
-20...+85
50 000 / 20 000
52 500
612 F-637
29
17.1
12
10.8...12.6
27
4.4
1.0
3 900
-20...+80
50 000 / 20 000
52 500
Subject to change
Tin-p
la
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
36
Finger guards
from p. 242
ted
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (60 °C)
ebm-papst standard
°C
Type
Nominal data
Service life L10 (20 °C)
ebm-papst standard
rpm-1
Sound power level
Temperature range
Power consumption
Watts
Nominal speed
Sintec sleeve bearings
Ball bearings
/
Air flow
Series 600 F
Sound pressure level
1) Fiberglass-reinforced plastic
¡
¿
¡
¬
¡
¬
¿
¡
Information
67 m /h
DC axial fans
3
 60 x 25 mm
–
–
–
DC axial fans
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
DC centrifugal fans
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Clockwise,
looking towards rotor
Connection:
Via single wires AWG 22,
TR 64
Highlights:
Very low-noise motor
Weight:
85 g
– Material:
Hours
Hours
622 L
21
12.4
12
8...15
20
3.7
0.5
3 200
-20...+85
80 000 / 20 000
135 000
622 M
30
17.7
12
8...15
29
4.3
1.0
4 550
-20...+75
77 500 / 30 000
130 000
622 N
40
23.5
12
8...15
35
4.7
1.9
6 100
-20...+70
72 500 / 35 000
122 500
622 H
46
27.1
12
8...15
39
5.1
2.3
6 850
-20...+70
70 000 / 35 000
117 500
622 HH
56
33.0
12
8...15
43
5.6
3.5
8 200
-20...+70
65 000 / 32 500
110 000
622/2 H3P
67
39.4
12
8...13.2
48
5.9
5.5
9 700
-20...+60
52 500 / 32 500
87 500
624 L
21
12.4
24
18...28
20
3.7
1.0
3 200
-20...+70
80 000 / 40 000
135 000
624 M
30
17.7
24
12...28
29
4.3
1.5
4 550
-20...+70
77 500 / 37 500
130 000
624 N
40
23.5
24
12...28
35
4.7
2.2
6 100
-20...+70
72 500 / 35 000
122 500
624 H
46
27.1
24
18...28
39
5.1
2.4
6 850
-20...+70
70 000 / 35 000
117 500
624 HH
56
33.0
24
18...28
43
5.6
3.6
8 200
-20...+70
65 000 / 32 500
110 000
624/2 H3P
67
39.4
24
18...28
48
5.9
5.6
9 700
-20...+60
52 500 / 32 500
87 500
628 HH
56
33.0
48
36...60
43
5.6
4.2
8 200
-20...+70
65 000 / 32 500
110 000
DC fans - specials
°C
¿
¡
¬
√
ƒ
≈
ACmaxx / EC fans
rpm-1
¿
¡
¬
√
ƒ
≈
AC axial fans
Watts
Curve
Power consumption
/
Life expectancy L10IPC
(40 °C) see page 17
Sintec sleeve bearings
Ball bearings
Bel(A)
Service life L10 (Tmax)
ebm-papst standard
Sound power level
dB(A)
Air flow
m3/hcfm VDC
Service life L10 (40 °C)
ebm-papst standard
Sound pressure level
Type
Air flow
Nominal data
Temperature range
Voltage range
VDC
Series 620
Nominal speed
Nominal voltage
1) Fiberglass-reinforced plastic
ƒ
AC centrifugal fans
Subject to change
ted
Accessories
Tin-p
la
Finger guards
from p. 242
37
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Representatives
Max.
Max.
58 m /h
DC axial fans
3
 60 x 25 mm
– Possible special versions:
Housing: GRP1) (PBT)
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Exhaust over struts
- Go / NoGo alarm
Direction of rotation: Clockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
Via single wires AWG 22,
- PWM control input
TR 64
- Analog control input
Highlights:
Developed for applications with
- Moisture protection
demanding environmental
- Salt spray protection
requirements
- Degree of protection: IP 54 / IP 68
Weight:
70 g
– Material:
–
–
–
–
–
5 900
-20...+70
85 000 / 42 500
142 500
6 300
-20...+70
85 000 / 42 500
142 500
1.6
5 900
-20...+70
85 000 / 42 500
142 500
3.2
8 500
-20...+70
75 000 / 37 500
127 500
6.1
3.2
8 500
-20...+70
75 000 / 37 500
127 500
5.4
1.8
6 300
-20...+70
85 000 / 42 500
142 500
Air flow
Nominal voltage
Voltage range
VDC
632 NU
40
23.5
12
6...15
33
5.2
1.8
632/2 HPU
44
25.9
12
10.8...13.2
35
5.4
1.5
634 NU
40
23.5
24
12...30
34
5.1
634 HHU
58
34.1
24
18...28
44
6.1
634/2 HHPU
58
34.1
24
18...28
44
638/2 HPU
44
25.9
48
40...60
35
dB(A) Bel(A)
Subject to change
Tin-p
la
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Finger guards
from p. 242
ted
Curve
Hours
VDC
38
Life expectancy L10IPC
(40 °C) see page 17
Hours
cfm
Type
Service life L10 (Tmax)
ebm-papst standard
°C
m3/h
Nominal data
Service life L10 (40 °C)
ebm-papst standard
rpm-1
Sound power level
Temperature range
Power consumption
Watts
Nominal speed
Sintec sleeve bearings
Ball bearings
/
Air flow
Series 630
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
¿
¬
¬
¡
Information
DC axial fans
3
 60 x 25 mm
–
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Moisture protection
- Degree of protection: IP 54 / IP 68
DC centrifugal fans
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Clockwise,
looking towards rotor
Connection:
Via single wires AWG 22,
TR 64
Highlights:
Some models are suitable for
use at high ambient
temperatures up to 85 °C.
Weight:
66 g
– Material:
612 NGLE
21
12.4
12
8...15
16
3.6
0.6
2 500
-20...+85
80 000 / 27 500
135 000
612 NLE
21
12.4
12
8...15
16
3.6
0.4
2 500
-20...+85
80 000 / 27 500
135 000
612 NGMLE
25
14.7
12
8...15
19
3.9
0.7
3 000
-20...+80
80 000 / 32 500
135 000
612 NMLE
25
14.7
12
8...15
19
3.9
0.4
3 000
-20...+85
80 000 / 27 500
135 000
612 NGME
35
20.6
12
8...15
28
4.6
1.2
4 100
-20...+75
80 000 / 35 000
135 000
612 NME
35
20.6
12
8...15
28
4.6
0.8
4 100
-20...+75
80 000 / 35 000
135 000
612 NN
42
24.7
12
8...15
35
5.0
1.5
5 100
-20...+70
70 000 / 35 000
117 500
612 NH
43
25.3
12
8...15
37
5.3
1.8
5 600
-20...+70
70 000 / 35 000
117 500
612 NHH-118
56
33.0
12
8...15
41
5.7
2.9
6 800
-20...+70
60 000 / 30 000
102 500
614 NGL
21
12.4
24
18...28
16
3.6
1.0
2 500
-20...+70
80 000 / 40 000
135 000
614 NL
21
12.4
24
18...28
16
3.6
0.8
2 500
-20...+70
80 000 / 40 000
135 000
614 NGML
25
14.7
24
18...28
19
3.9
1.2
3 000
-20...+70
80 000 / 40 000
135 000
614 NML
25
14.7
24
18...28
19
3.9
1.0
3 000
-20...+70
80 000 / 40 000
135 000
614 NGM
35
20.6
24
18...28
28
4.6
1.7
4 100
-20...+70
80 000 / 40 000
135 000
614 NM
35
20.6
24
18...28
28
4.6
1.3
4 100
-20...+70
80 000 / 40 000
135 000
614 NN
42
24.7
24
18...28
35
5.0
1.8
5 100
-20...+70
70 000 / 35 000
117 500
614 NH
43
25.3
24
18...26
37
5.3
2.1
5 600
-20...+70
70 000 / 35 000
117 500
614 NHH
56
33.0
24
18...26
41
5.7
2.9
6 850
-20...+70
60 000 / 30 000
102 500
614 NHH-119
56
33.0
24
18...28
41
5.7
2.9
6 850
-20...+70
60 000 / 30 000
102 500
618 NM
35
20.6
48
36...56
28
4.6
1.9
4 100
-20...+70
80 000 / 40 000
135 000
618 NN
42
24.7
48
36...56
35
5.0
2.1
5 100
-20...+65
70 000 / 40 000
117 500
Tin-p
la
Hours
Hours
¿
¿
¡
¡
¬
¬
√
ƒ
≈
¿
¿
¡
¡
¬
¬
√
ƒ
≈
≈
¬
√
ted
Accessories
dB(A) Bel(A)
DC fans - specials
VDC
ACmaxx / EC fans
VDC
AC axial fans
cfm
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Finger guards
from p. 242
39
2016-01
Type
AC centrifugal fans
m3/h
Nominal data
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption
Nominal speed
Sintec sleeve bearings
Ball bearings
Sound power level
°C
Voltage range
rpm-1
Nominal voltage
Watts
Air flow
/
Air flow
Sound pressure level
1) Fiberglass-reinforced plastic
Series 600 N
DC axial fans
56 m /h
Representatives
Max.
Max.
41 m /h
DC axial fans
3
 60 x 25 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Clockwise,
looking towards rotor
Connection:
Via single wires AWG 22,
TR 64
Highlights:
Automatic speed adjustment
with temperature sensor
Weight:
66 g
– Material:
–
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- External temperature sensor
- Internal temperature sensor
- Moisture protection
30°C
612 NMI
55°C
30°C
612 NGNI
55°C
30°C
612 NNI
55°C
30°C
612 NGNV
55°C
18
10.6
35
20.6
16
9.4
35
20.6
23
13.5
41
24.1
23
13.5
41
24.1
23
13.5
41
24.1
12
8...12.6
12
8...12.6
12
8...12.6
12
8...12.6
12
8...12.6
dB(A) Bel(A)
rpm-1
°C
Hours
Hours
-20...+65
80 000 / 45 000
135 000
-20...+65
80 000 / 45 000
135 000
-20...+65
70 000 / 40 000
117 500
-20...+65
70 000 / 40 000
117 500
-20...+65
70 000 / 40 000
117 500
14
3.5
1.3
2 150
28
4.6
1.7
4 100
16
3.6
1.0
2 400
28
4.6
1.4
4 100
18
3.8
1.7
2 900
35
5.0
2.4
5 100
18
3.8
1.2
2 900
35
5.0
1.5
5 100
18
3.8
1.7
2 900
35
5.0
2.4
5 100
Curve
Life expectancy L10IPC
(40 °C) see page 17
Watts
Service life L10 (Tmax)
ebm-papst standard
/
Service life L10 (40 °C)
ebm-papst standard
Power consumption
VDC
Sintec sleeve bearings
Ball bearings
VDC
Sound power level
Voltage range
cfm
Temperature range
612 NGMI
55°C
m3/h
Nominal speed
30°C
Nominal voltage
Type
Air flow
Nominal data
Air flow
Series 600 N
VARIOFAN
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
¬
√
ƒ
≈
ƒ
≈
ƒ
≈
Subject to change
Air performance measured according
to: ISO 5801. Installation category A,
without contact protection.
Noise: Total sound power level LWA
ISO 103002 measured on half-sphere
of 2 m; Sound pressure level LpA measured at 1 m distance from fan axis.
The values given are applicable only
under the specified measuring conditions and may differ depending on the
installation conditions. In the event of
deviation from the standard configuration, the parameters must be checked
after installation! For detailed information see http://www.ebmpapst.com/
general conditions
V types
I types
Tin-p
la
2016-01
The temperature sensor for controlling the motor speed is not included
in the scope of delivery.
For the temperature sensor LZ 370,
see accessories.
40
Finger guards
from p. 242
The temperature sensor (NTC resistor)
for controlling the motor speed
is positioned in the fan hub directly
in the air flow.
ted
Information
82 m /h
DC axial fans
3
 60 x 32 mm
–
–
DC axial fans
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- PWM control input
- Analog control input
- Moisture protection
DC centrifugal fans
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Clockwise,
looking towards rotor
Connection:
Via single wires AWG 24,
TR 64
Weight:
100 g
– Material:
-20...+70
57 500 / 27 500
97 500
7.7
11 700
-20...+70
57 500 / 27 500
97 500
6.4
7.7
11 700
-20...+70
57 500 / 27 500
97 500
¿
¡
Nominal voltage
Voltage range
612 JH
70
41.1
12
7...13.6
53
6.4
7.7
614 JH
70
41.1
24
14...26.4
53
6.4
618 JH
70
41.1
48
36...56
53
dB(A) Bel(A)
Hours
Fan types with streamer and integrated guard grille.
614 J/2 HHP
82
48.3
24
18...30
62
7.6
14.6
15 000
-20...+75
65 000 / 25 000
110 000
618 J/2 HHP
82
48.3
48
38...58
62
7.6
14.6
15 000
-20...+75
65 000 / 25 000
110 000
DC fans - specials
Air flow
VDC
Curve
11 700
VDC
¿
¿
ACmaxx / EC fans
Life expectancy L10IPC
(40 °C) see page 17
Hours
cfm
Type
Service life L10 (Tmax)
ebm-papst standard
°C
m3/h
Nominal data
Service life L10 (40 °C)
ebm-papst standard
rpm-1
Sound power level
Temperature range
Power consumption
Watts
Nominal speed
Sintec sleeve bearings
Ball bearings
/
Air flow
Series 600 J
Sound pressure level
1) Fiberglass-reinforced plastic
¡
Subject to change
AC centrifugal fans
AC axial fans
Rear view of types 614 J/2HHP and 618 J/2HHP
ted
Accessories
Tin-p
la
Finger guards
from p. 242
41
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Representatives
Max.
Max.
44 m /h
DC axial fans
3
 70 x 15 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 24 to
AWG 28, TR 64
Weight:
53 g
– Material:
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Moisture protection
-20...+70
60 000 / 30 000
102 500
4 300
-20...+70
60 000 / 30 000
102 500
1.7
5 300
-20...+70
60 000 / 30 000
102 500
1.5
5 300
-20...+70
60 000 / 30 000
102 500
VDC
712 F/2L-005*
28
16.5
12
8...13.8
25
4.7
0.6
712 F/2M-006*
36
21.2
12
8...13.8
32
5.0
1.1
712 F
44
25.9
12
8...13.8
38
5.3
714 F
44
25.9
24
18...28
5.3
38
Subject to change
*Version with 3-pin
Molex plug housing
Molex Contacts
22-01-2035
08-50-0113
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
42
Finger guards
from p. 242
Tin-p
la
ted
Curve
3 300
VDC
dB(A) Bel(A)
Life expectancy L10IPC
(40 °C) see page 17
Hours
cfm
Type
Service life L10 (Tmax)
ebm-papst standard
Hours
m3/h
Nominal data
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption
°C
Voltage range
rpm-1
Nominal voltage
Nominal speed
Sintec sleeve bearings
Ball bearings
Watts
Air flow
Sound power level
/
Air flow
Series 700 F
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
¬
¬
Information
117 m /h
DC axial fans
3
 80 x 25 mm
–
–
–
DC axial fans
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
DC centrifugal fans
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 24,
TR 64
Highlights:
Very low-noise motor
Weight:
105 g
– Material:
135 000
80 000 / 35 000
135 000
1.8
3 600
-20...70
70 000 / 35 000
117 500
32
18.8
12
8...15
14
3.3
0.4
8452 GM
58
34.1
12
8...15
32
4.7
1.3
8452 GN
68
40.0
12
8...15
36
5.0
Models with 25 kHz PWM control and speed signal to 4-wire specification (see page 179).
¿
¡
¬
8452/2 GHP
75
44.1
12
10.8...13.2
38
5.3
2.5
4 000
-20...70
70 000 / 35 000
117 500
8452/2 GHHP
83
48.8
12
10.8...13.2
42
5.5
3.5
4 400
-20...60
65 000 / 40 000
110 000
√
ƒ
≈
Models with 1-30 kHz PWM control and speed signal.
8452/2 H4P
117
68.8
12
8...15
50
6.4
6.8
6 200
-20...70
60 000 / 30 000
102 500
8454/2 H4P
117
68.8
24
20.0...26.4
50
6.4
6.8
6 200
-20...70
60 000 / 30 000
102 500
DC fans - specials
80 000 / 35 000
-20...75
8452 GL
ACmaxx / EC fans
-20...75
3 100
VDC
Curve
1 700
VDC
dB(A) Bel(A)
Life expectancy L10IPC
(40 °C) see page 17
Hours
cfm
Type
Service life L10 (Tmax)
ebm-papst standard
Hours
m3/h
Nominal data
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption
°C
Voltage range
rpm-1
Nominal voltage
Nominal speed
Sintec sleeve bearings
Ball bearings
Watts
Air flow
Sound power level
/
Air flow
Series 8450
Sound pressure level
1) Fiberglass-reinforced plastic
≈
AC centrifugal fans
AC axial fans
Subject to change
ted
Accessories
Tin-p
la
Finger guards
from p. 242
43
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Representatives
Max.
Max.
79 m /h
DC axial fans
3
 80 x 25 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 24,
TR 64
Highlights:
Some models are suitable for
use at high ambient
temperatures up to 85 °C.
Weight:
95 g
– Material:
–
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
- Degree of protection: IP 54 / IP 68
cfm
VDC
VDC
8412 NGLE
33
19.4
12
8...15
12
3.5
0.5
1 500
-20...+85
80 000 / 27 500
135 000
8412 NLE
33
19.4
12
8...15
17
3.7
0.3
1 500
-20...+85
80 000 / 27 500
135 000
8412 NGMLE
45
26.5
12
8...15
19
3.9
0.9
2 050
-20...+80
80 000 / 32 500
135 000
8412 NMLE
45
26.5
12
8...15
21
4.0
0.6
2 050
-20...+85
80 000 / 27 500
135 000
8412 NGME
58
34.1
12
8...15
26
4.3
1.4
2 600
-20...+75
80 000 / 35 000
135 000
8412 NME
58
34.1
12
8...15
27
4.4
1.0
2 600
-20...+75
80 000 / 35 000
135 000
8412 NG
69
40.6
12
8...15
32
4.7
2.0
3 100
-20...+70
70 000 / 35 000
117 500
8412 N
69
40.6
12
8...15
32
4.7
1.7
3 100
-20...+70
70 000 / 35 000
117 500
8412 NH
79
46.5
12
8...13.2
37
5.0
2.1
3 600
-20...+70
70 000 / 35 000
117 500
8412 NH-217
79
46.5
12
8...15
37
5.0
2.5
3 600
-20...+70
70 000 / 35 000
117 500
8414 NGL
33
19.4
24
18...28
12
3.5
0.9
1 500
-20...+70
80 000 / 40 000
135 000
8414 NL
33
19.4
24
18...28
17
3.7
0.8
1 500
-20...+70
80 000 / 40 000
135 000
8414 NGML
45
26.5
24
18...28
19
3.9
1.2
2 050
-20...+70
80 000 / 40 000
135 000
8414 NML
45
26.5
24
18...28
21
4.0
1.1
2 050
-20...+70
80 000 / 40 000
135 000
8414 NGM
58
34.1
24
18...28
26
4.3
1.4
2 600
-20...+70
80 000 / 40 000
135 000
8414 NM
58
34.1
24
18...28
27
4.4
1.4
2 600
-20...+70
80 000 / 40 000
135 000
8414 NG
69
40.6
24
18...28
32
4.7
2.2
3 100
-20...+70
70 000 / 35 000
117 500
8414 N
69
40.6
24
18...28
32
4.7
1.8
3 100
-20...+70
70 000 / 35 000
117 500
8414 NH
79
46.5
24
18...26
37
5.0
2.4
3 600
-20...+70
70 000 / 35 000
117 500
8414 NH-221
79
46.5
24
18...28
37
5.0
2.2
3 600
-20...+70
70 000 / 35 000
117 500
8418 N
69
40.6
48
36...56
32
4.7
2.0
3 100
-20...+70
70 000 / 35 000
117 500
Type
dB(A) Bel(A)
Tin-p
la
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration, the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
44
Finger guards
from p. 242
ted
Hours
Hours
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
m3/h
Nominal data
2016-01
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption
Nominal speed
Sintec sleeve bearings
Ball bearings
Sound power level
°C
Voltage range
rpm-1
Nominal voltage
Watts
Air flow
/
Air flow
Series 8400 N
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¿
¡
¡
¬
¬
√
√
ƒ
ƒ
¿
¿
¡
¡
¬
¬
√
√
ƒ
ƒ
√
Information
58 m /h
DC axial fans
3
 80 x 25 mm
–
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- External temperature sensor
- Internal temperature sensor
- Moisture protection
DC axial fans
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 24,
TR 64
Highlights:
Automatic speed adjustment
with temperature sensor
Weight:
95 g
– Material:
DC centrifugal fans
Max.
15.9
26.6
35
20.6
58
34.1
12
8...14
12
8...14
°C
Hours
Hours
-20...+65
80 000 / 45 000
135 000
-20...+65
80 000 / 45 000
135 000
-20...+65
80 000 / 45 000
135 000
< 10
<3
0.9
900
12
3.5
1.1
1 500
< 10
3.0
1.1
1 200
19
3.9
1.5
2 050
< 13
3.5
1.4
1 600
26
4.3
2.0
2 600
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Power consumption
Service life L10 (40 °C)
ebm-papst standard
Sintec sleeve bearings
Ball bearings
rpm-1
DC fans - specials
10...14
Sound power level
Voltage range
27
45
12
Watts
¿
¡
¬
√
ACmaxx / EC fans
8412 NGMI
11.8
19.4
/
ƒ
≈
AC axial fans
Subject to change
AC centrifugal fans
50°C
20
33
dB(A) Bel(A)
Air performance measured according to: ISO 5801. Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002 measured on half-sphere of 2 m; Sound pressure level LpA measured at 1 m distance from fan axis.
The values given are applicable only under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation
from the standard configuration, the parameters must be checked after installation! For detailed information see http://www.ebmpapst.com/general conditions
V types
I types
Tin-p
la
ted
Accessories
30°C
8412 NGMLV
VDC
The temperature sensor for controlling the
motor speed is not included in the scope of
delivery.
For the temperature sensor LZ 370, see
accessories.
Finger guards
from p. 242
The temperature sensor (NTC resistor)
for controlling the motor speed
is positioned in the fan hub directly
in the air flow.
45
Representatives
50°C
VDC
2016-01
30°C
8412 NGLV
cfm
Temperature range
50°C
m3/h
Nominal speed
30°C
Nominal voltage
Type
Air flow
Nominal data
Air flow
Series 8400 N
VARIOFAN
Sound pressure level
1) Fiberglass-reinforced plastic
Max.
80 m /h
DC axial fans
3
 80 x 32 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Clockwise,
looking towards rotor
Connection:
Via single wires AWG 22,
TR 64
Weight:
170 g
– Material:
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
- Salt spray protection
- Degree of protection: IP 54 / IP 68
dB(A) Bel(A)
°C
Hours
Hours
8312 L
32
18.8
12
6...15
24
4.0
1.2
2 000
-20...+75
80 000 / 32 500
135 000
8312 M
48
28.3
12
6...15
34
5.0
2.2
3 000
-20...+75
70 000 / 27 500
117 500
8312
54
31.8
12
6...15
36
5.2
2.6
3 300
-20...+75
70 000 / 27 500
117 500
8312 HL
67
39.4
12
6...15
43
5.8
4.0
4 200
-20...+75
62 500 / 25 000
105 000
8312 H
80
47.1
12
6...12.6
48
6.2
6.4
5 000
-20...+60
55 000 / 35 000
92 500
8314 L
32
18.8
24
12...31.5
24
4.0
1.0
2 000
-20...+75
80 000 / 32 500
135 000
8314 M
48
28.3
24
12...31.5
34
5.0
2.3
3 000
-20...+75
70 000 / 27 500
117 500
8314
54
31.8
24
12...31.5
36
5.2
2.7
3 300
-20...+75
70 000 / 27 500
117 500
8314 HL
67
39.4
24
12...31.5
43
5.8
4.3
4 200
-20...+75
62 500 / 25 000
105 000
8314 H
80
47.1
24
12...28
48
6.2
6.0
5 000
-20...+75
55 000 / 20 000
92 500
8318
54
31.8
48
36...60
36
5.2
3.0
3 300
-20...+75
70 000 / 27 500
117 500
8318 HL
67
39.4
48
36...60
43
5.8
4.2
4 200
-20...+75
62 500 / 25 000
105 000
8318 H
80
47.1
48
36...60
48
6.2
6.2
5 000
-20...+65
55 000 / 30 000
92 500
Rotor protrusion max. 0.4 mm.
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
46
Finger guards
from p. 242
Tin-p
la
ted
Curve
rpm-1
Subject to change
2016-01
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Watts
Service life L10 (40 °C)
ebm-papst standard
/
Temperature range
VDC
Nominal speed
VDC
Power consumption
cfm
Sintec sleeve bearings
Ball bearings
Voltage range
m3/h
Sound power level
Nominal voltage
Type
Air flow
Nominal data
Air flow
Series 8300
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
¬
√
ƒ
¿
¡
¬
√
ƒ
¬
√
ƒ
Information
222 m /h
DC axial fans
3
 80 x 38 mm
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
- Degree of protection:IP 54
DC axial fans
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 24
(H3 and H4: AWG 22), TR 64
Weight:
160 g (H3 and H4: 200 g)
– Material:
DC centrifugal fans
Max.
Hours
8212 JN
132
78
12
7...13.8
55
6.6
10
8 400
-20...+70
62 500 / 32 500
105 000
8212 JH3
190
112
12
6...13.8
66
7.3
26*
12 000
-20...+70
55 000 / 27 500
92 500
8212 JH4
222
131
12
6...13.8
71
7.8
39*
14 000
-20...+70
50 000 / 25 000
85 000
8214 JN
132
78
24
18...26.4
55
6.6
11
8 400
-20...+70
62 500 / 32 500
105 000
8214 JH3
190
112
24
12...27.6
66
7.3
26*
12 000
-20...+70
55 000 / 27 500
92 500
8214 JH4
222
131
24
12...27.6
71
7.8
38*
14 000
-20...+70
50 000 / 25 000
85 000
8218 JN
132
78
48
36...53
55
6.6
11
8 400
-20...+70
62 500 / 32 500
105 000
8218 JH3
190
112
48
36...53
66
7.3
25*
12 000
-20...+70
55 000 / 27 500
92 500
8218 JH4
222
131
48
20...58
71
7.8
36*
14 000
-20...+70
50 000 / 25 000
85 000
DC fans - specials
Hours
Curve
°C
Life expectancy L10IPC
(40 °C) see page 17
rpm-1
Service life L10 (Tmax)
ebm-papst standard
Watts
Service life L10 (40 °C)
ebm-papst standard
/
¿
¡
¬
¿
¡
¬
ACmaxx / EC fans
dB(A) Bel(A)
Temperature range
VDC
Nominal speed
VDC
Power consumption
cfm
Sintec sleeve bearings
Ball bearings
Voltage range
m3/h
Sound power level
Nominal voltage
Type
Air flow
Nominal data
Air flow
Series 8200 J
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
¬
Subject to change
ted
47
Representatives
Finger guards
from p. 242
Tin-p
la
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Accessories
AC centrifugal fans
AC axial fans
8200 JH3 and JH4 also available as standard with PWM control input and speed signal.
Speed control range from 2000 rpm-1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted.
* Power consumption at free air flow. These values can be significantly higher in the operating point.
Max.
102 m /h
DC axial fans
3
 92 x 25 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 24,
TR 64
Weight:
100 g
– Material:
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
- Degree of protection: IP 54 / IP 68
-20...+80
-20...+85
-20...+75
-20...+75
-20...+70
-20...+70
-20...+70
-20...+70
-20...+60
-20...+60
-20...+70
80 000 / 22 500
80 000 / 17 500
75 000 / 27 500
75 000 / 27 500
70 000 / 35 000
70 000 / 35 000
70 000 / 35 000
70 000 / 35 000
70 000 / 45 000
70 000 / 45 000
70 000 / 35 000
135 000
135 000
127 500
127 500
117 500
117 500
117 500
117 500
117 500
117 500
117 500
1.4
1.1
1.7
1.4
2.5
2.1
3.0
2.3
3.2
3.2
3.1
3.2
1 950
1 950
2 300
2 300
2 700
2 700
3 000
3 000
3 250
3 250
3 250
3 250
-20...+70
-20...+70
-20...+70
-20...+70
-20...+70
-20...+70
-20...+70
-20...+70
-20...+70
-20...+70
-20...+70
-20...+70
80 000 / 40 000
80 000 / 40 000
75 000 / 37 500
75 000 / 37 500
70 000 / 35 000
70 000 / 35 000
70 000 / 35 000
70 000 / 35 000
70 000 / 35 000
70 000 / 35 000
70 000 / 35 000
70 000 / 35 000
135 000
135 000
127 500
127 500
117 500
117 500
117 500
117 500
117 500
117 500
117 500
117 500
2.4
2 700
-20...+70
70 000 / 35 000
117 500
VDC
VDC
3412 NGLE
3412 NLE
3412 NGME
3412 NME
3412 NG
3412 N
3412 NGH
3412 NH
3412 NGHH
3412 NHH
3412 NHH-379
61
61
72
72
84
84
94
94
102
102
102
35.9
35.9
42.4
42.4
49.4
49.4
55.3
55.3
60.0
60.0
60.0
12
12
12
12
12
12
12
12
12
12
12
8...15
8...15
8...15
8...15
8...15
8...15
8...15
8...15
8...13.2
8...13.2
8...15
23
23
28
28
32
32
36
36
39
39
39
4.0
4.0
4.3
4.3
4.7
4.7
5.0
5.0
5.1
5.1
5.1
1.1
0.8
1.6
1.1
1.9
1.7
2.3
2.1
3.2
2.9
2.7
3414 NGL
3414 NL
3414 NGM
3414 NM
3414 NG
3414 N
3414 NGH
3414 NH
3414 NGHH
3414 NGHH-389
3414 NHH
3414 NHH-386
61
61
72
72
84
84
94
94
102
102
102
102
35.9
35.9
42.4
42.4
49.4
49.4
55.3
55.3
60.0
60.0
60.0
60.0
24
24
24
24
24
24
24
24
24
24
24
24
18...28
18...28
18...28
18...28
18...28
18...28
18...26
18...26
18...26
18...28
18...26
18...28
23
23
28
28
32
32
36
36
39
39
39
39
4.0
4.0
4.3
4.3
4.7
4.7
5.0
5.0
5.1
5.1
5.1
5.1
84
49.4
48
36...56
32
4.7
Other 48 VDC models on request.
Tin-p
la
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
48
Finger guards
from p. 242
ted
Curve
1 950
1 950
2 300
2 300
2 700
2 700
3 000
3 000
3 250
3 250
3 250
cfm
3418 N
Life expectancy L10IPC
(40 °C) see page 17
Hours
m3/h
dB(A) Bel(A)
Service life L10 (Tmax)
ebm-papst standard
Hours
Type
Nominal data
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption
°C
Voltage range
rpm-1
Nominal voltage
Nominal speed
Sintec sleeve bearings
Ball bearings
Watts
Air flow
Sound power level
/
Air flow
Series 3400 N
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¿
¡
¡
¬
¬
√
√
ƒ
ƒ
ƒ
¿
¿
¡
¡
¬
¬
√
√
ƒ
ƒ
ƒ
ƒ
¬
Information
84 m /h
DC axial fans
3
 92 x 25 mm
–
–
–
DC axial fans
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- External temperature sensor
- Internal temperature sensor
- Moisture protection
DC centrifugal fans
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 24,
TR 64
Highlights:
Automatic speed adjustment
with temperature sensor
Weight:
100 g
– Material:
25.9
42.4
50
29.4
84
49.4
rpm-1
°C
Hours
Hours
-20...+65
75 000 / 42 500
127 500
-20...+65
75 000 / 42 500
127 500
14
3.5
1.5
1 400
28
4.3
2.0
2 300
16
3.7
1.6
1 600
32
4.7
2.5
2 700
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Watts
Service life L10 (40 °C)
ebm-papst standard
8...12.6
Power consumption
12
Sintec sleeve bearings
Ball bearings
8...14
Sound power level
12
/
DC fans - specials
44
72
dB(A) Bel(A)
¿
¡
¬
√
ACmaxx / EC fans
3412 NGV
VDC
AC axial fans
Subject to change
AC centrifugal fans
The temperature sensor for controlling
the motor speed is not included in the
scope of delivery.
For the temperature sensor LZ 370, see
accessories.
ted
Accessories
Tin-p
la
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Finger guards
from p. 242
49
2016-01
50°C
VDC
Temperature range
30°C
3412 NGMV
cfm
Nominal speed
50°C
Voltage range
30°C
m3/h
Nominal voltage
Type
Air flow
Nominal data
Air flow
Series 3400 N
VARIOFAN
Sound pressure level
1) Fiberglass-reinforced plastic
Representatives
Max.
Max.
DC axial fans
133 m /h
3
 92 x 32 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Clockwise,
looking towards rotor
Connection:
Via single wires
AWG 24 UL 1061,
TR 64
Weight:
190 g
– Material:
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
- Salt spray protection
- Degree of protection: IP 54 / IP 68
dB(A) Bel(A)
rpm-1
°C
Hours
Hours
3312 NL
56
33
12
6...15
24
4.1
0.8
1 850
-20...+75
80 000 / 35 000
135 000
3312 NM
68
40
12
6...15
29
4.5
1.3
2 250
-20...+75
70 000 / 30 000
117 500
3312 NN
80
47
12
6...15
35
4.7
1.8
2 650
-20...+75
70 000 / 30 000
117 500
3312 NH
93
54
12
6...15
38
5.1
2.8
3 050
-20...+75
65 000 / 27 500
110 000
3312 NHH
107
63
12
6...15
42
5.4
3.4
3 450
-20...+75
57 500 / 25 000
97 500
3312 NH3
133
78
12
6...14
50
6.0
6.7
4 350
-20...+70
50 000 / 25 000
85 000
3314 NN
80
47
24
18...28
35
4.7
1.8
2 650
-20...+75
70 000 / 30 000
117 500
3314 NH
93
54
24
18...28
38
5.1
2.6
3 050
-20...+75
65 000 / 27 500
110 000
3314 NHH
107
63
24
18...28
42
5.4
3.5
3 450
-20...+75
57 500 / 25 000
97 500
3314 NH3
133
78
24
18...28
50
6.0
6.7
4 350
-20...+75
50 000 / 22 500
85 000
3318 NN
80
47
48
36...60
35
4.7
1.8
2 650
-20...+75
70 000 / 30 000
117 500
3318 NH
93
54
48
36...60
38
5.1
3.5
3 050
-20...+75
65 000 / 27 500
110 000
3318 NH3
133
78
48
36...58
50
6.0
6.5
4 350
-20...+75
50 000 / 22 500
85 000
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Watts
Service life L10 (40 °C)
ebm-papst standard
/
Temperature range
VDC
Nominal speed
VDC
Power consumption
cfm
Sintec sleeve bearings
Ball bearings
Voltage range
m3/h
Sound power level
Nominal voltage
Type
Air flow
Nominal data
Air flow
Series 3300 N
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
¬
√
ƒ
≈
¬
√
ƒ
≈
¬
√
≈
Subject to change
Tin-plated
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration, the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
50
Finger guards
from p. 242
Ø 100,1 ± 0,3
Information
 92 x 38 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Clockwise,
looking towards rotor
Connection:
Via single wires AWG 24
(H3 and H4: AWG 22), TR 64
Weight:
240 g (H3 and H4: 280 g)
– Material:
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
- Degree of protection: IP 54 / IP 68
VDC
VDC
3212 JN
130
76.5
12
7...13.8
51
6.1
7.5
6 000
-20 ...+70
70 000 / 35 000
117 500
3212 JH
146
86.0
12
7...15
55
6.4
9.0
6 800
-20 ...+70
70 000 / 35 000
117 500
3212 JH3
237
139.5
12
6...13.8
69
7.8
31.0*
11 000
-20 ...+70
65 000 / 32 500
110 000
3212 JH4
280
164.8
12
6...13.8
73
8.2
50.0*
13 000
-20 ...+70
60 000 / 30 000
110 000
3214 JN
130
76.5
24
11...28
51
6.1
6.5
6 000
-20 ...+70
70 000 / 35 000
117 500
3214 JH
146
86.0
24
12...30
55
6.4
9.0
6 800
-20 ...+70
70 000 / 35 000
117 500
3214 JH3
237
139.5
24
12...27.6
69
7.8
30.0*
11 000
-20 ...+70
65 000 / 32 500
110 000
3214 JH4
280
164.8
24
12...27.6
73
8.2
50.0*
13 000
-20 ...+70
60 000 / 30 000
110 000
3218 JN
130
76.5
48
36...56
51
6.1
7.0
6 000
-20 ...+70
70 000 / 35 000
117 500
3218 JH
146
86.0
48
36...53
55
6.4
9.5
6 800
-20 ...+70
70 000 / 35 000
117 500
3218 JH3
237
139.5
48
20...58.0
69
7.8
29.0*
11 000
-20 ...+70
65 000 / 32 500
110 000
3218 JH4
280
164.8
48
20...58.0
73
8.2
50.0*
13 000
-20 ...+70
60 000 / 30 000
110 000
dB(A) Bel(A)
Hours
Hours
DC fans - specials
cfm
¿
¡
¬
√
¿
¡
¬
√
ACmaxx / EC fans
m3/h
¿
¡
¬
√
AC axial fans
Type
Nominal data
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption*
Nominal speed
Sintec sleeve bearings
Ball bearings
Sound power level
°C
Voltage range
rpm-1
Nominal voltage
Watts
Air flow
/
Air flow
Series 3200 J
Sound pressure level
1) Fiberglass-reinforced plastic
DC axial fans
DC axial fans
3
DC centrifugal fans
280 m /h
Subject to change
AC centrifugal fans
3200 JH3 and JH4 also available as standard with PWM control input and speed signal.
Speed control range from 2000 rpm-1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted.
* Power consumption at free air flow. These values can be significantly higher in the operating point.
ted
Accessories
Tin-p
la
Finger guards
from p. 242
51
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Representatives
Max.
Max.
270 m /h
DC axial fans
3
 92 x 38 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Clockwise,
looking towards rotor
Connection:
Via single wires AWG 22,
TR 64
Weight:
240 g
– Material:
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
- Salt spray protection
- Degree of protection: IP 54 / IP 68
m3/h
cfm
VDC
VDC
3252 J/2 H3P
270
158
12
7...13.2
64
7.6
35.0
7 450
-20...+70
85 000 / 42 500 142 500
3254 J/2 H3P
270
158
24
14...26.4
64
7.6
35.0
7 450
-20...+70
85 000 / 42 500 142 500
3258 J/2 HP**
145
85
48
36...56.0
46
5.8
7.0
4 100
-20...+70
100 000 / 50 000 170 000
3258 J/2 HHP
235
138
48
36...56.0
59
7.0
24.3
6 650
-20...+70
90 000 / 45 000 152 500
3258 J/2 H3P
270
158
48
36...56.0
64
7.6
33.6
7 450
-20...+70
85 000 / 42 500 142 500
dB(A) Bel(A)
Subject to change
** On request
* Power consumption at free air flow. These values can be significantly higher in the operating point.
3
2
Tin-p
la
1
cfm
52
Finger guards
from p. 242
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parametersmust be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
ted
Hours
Hours
Curve
Temperature range
Life expectancy L10IPC
(40 °C) see page 17
Nominal speed
Service life L10 (Tmax)
ebm-papst standard
Power consumption*
Type
Nominal data
2016-01
Service life L10 (40 °C)
ebm-papst standard
Sintec sleeve bearings
Ball bearings
Sound power level
°C
Voltage range
rpm-1
Nominal voltage
Watts
Air flow
/
Air flow
Series 3250 J
Sound pressure level
1) Fiberglass-reinforced plastic
¬
¬
¿
¡
¬
Information
170 m /h
DC axial fans
3
 119 x 25 mm
–
–
–
DC axial fans
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
DC centrifugal fans
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 24,
TR 64
Highlights:
Ball bearings and sleeve
bearings available
Weight:
175 g
– Material:
Hours
Hours
94
55
12
7...14
26
3.9
1.3
1 600
-20...+75
80 000 / 32 500
135 000
4412 FGML
114
67
12
7...12.6
32
4.3
2.0
1 950
-20...+75
75 000 / 30 000
127 500
4412 FML
114
67
12
7...12.6
32
4.3
2.0
1 950
-20...+75
75 000 / 30 000
127 500
4412 FGM
140
82
12
7...12.6
38
4.8
3.2
2 400
-20...+75
70 000 / 27 500
117 500
4412 FM
140
82
12
7...12.6
38
4.8
3.2
2 400
-20...+75
70 000 / 27 500
117 500
4412 FG
170
100
12
8...12.6
43
5.3
5.3
2 900
-20...+60
60 000 / 37 500
102 500
4412 F
170
100
12
8...12.6
43
5.3
5.3
2 900
-20...+60
60 000 / 37 500
102 500
4414 FL
94
55
24
18...28
26
3.9
1.2
1 600
-20...+75
80 000 / 32 500
135 000
4414 FM
140
82
24
12...28
38
4.8
3.1
2 400
-20...+75
70 000 / 27 500
117 500
4414 FG
170
100
24
12...28
43
5.3
5.0
2 900
-20...+60
60 000 / 37 500
102 500
4414 F
170
100
24
12...28
43
5.3
5.0
2 900
-20...+60
60 000 / 37 500
102 500
4418 FG
170
100
48
28...53
43
5.3
5.4
2 900
-20...+60
60 000 / 37 500
102 500
4418 F
170
100
48
28...53
43
5.3
5.4
2 900
-20...+60
60 000 / 37 500
102 500
DC fans - specials
°C
¿
¡
¡
¬
¬
√
√
ACmaxx / EC fans
rpm-1
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Watts
Service life L10 (40 °C)
ebm-papst standard
/
Temperature range
dB(A) Bel(A)
Nominal speed
VDC
Power consumption
VDC
Sintec sleeve bearings
Ball bearings
cfm
Sound power level
Voltage range
m3/h
¿
¬
√
√
√
√
AC axial fans
4412 FGL
Nominal voltage
Type
Air flow
Nominal data
Air flow
Series 4400 F
Sound pressure level
1) Fiberglass-reinforced plastic
Subject to change
Finger guards
from p. 242
Accessories
Tin-p
la
ted
53
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
AC centrifugal fans
Available as an option:
Fan housing with molded-in
spacers
Representatives
Max.
Max.
170 m /h
DC axial fans
3
Ø 127 mm
– Possible special versions:
Housing: GRP1) (PBT)
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Exhaust over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- External temperature sensor
looking towards rotor
- Internal temperature sensor
Connection:
Via single wires AWG 24, TR 64
- PWM control input
Highlights:
Ball bearings and sleeve
- Analog control input
bearings available
- Moisture protection
Optional:
- Reversible direction of rotation
- Reversible direction of
- Symmetrical impeller
rotation
- Symmetrical impeller
Weight:
170 g
– Material:
–
–
–
–
–
80 000 / 32 500
135 000
-20...+75
75 000 / 30 000
127 500
3.2
2 400
-20...+75
75 000 / 27 500
117 500
5.3
2 900
-20...+60
60 000 / 37 500
102 500
VDC
VDC
NEW 4412 FGML*
91
54
12
7...15
26
3.9
1.2
114
67
12
7...12.6
32
4.3
2.0
NEW 4412 FG*
140
82
12
7...12.6
38
4.8
170
100
12
8...12.6
43
5.3
NEW 4412 FGM*
Curve
-20...+75
1 950
cfm
NEW 4412 FGL-573
Life expectancy L10IPC
(40 °C) see page 17
1 600
m3/h
dB(A) Bel(A)
Service life L10 (Tmax)
ebm-papst standard
Hours
Type
Nominal data
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption
°C
Voltage range
rpm-1
Nominal voltage
Nominal speed
Sintec sleeve bearings
Ball bearings
Watts
Air flow
Sound power level
/
Air flow
Series 4400 F
Sound pressure level
1) Fiberglass-reinforced plastic
Hours
¿
¬
¬
√
Subject to change
Other voltage versions (24 VDC, 48 VDC), speed variations and ball bearing designs are available as additional variants.
* On request












n
rpm-1
Ped
W
LwA
dB(A)
1515
1516
1547
1567
1
1
1
1
44
38
40
39
1856
1848
1882
1929
2
2
2
2
50
44
44
46
















Ped
W
LwA
dB(A)
2225
2235
2304
2369
4
4
4
4
51
50
51
52
2670
2685
2783
2869
6
6
6
6
59
59
56
57
4
0,2
200
150




n
rpm-1
,5
27
Ø1
0,15
3
100
0,1
2
0,05
1
50
0
20
2016-01
20
54
40
40
60
60
80
Finger guards
from p. 242
100
80
120
140
cfm
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parametersmust be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Tin-plated
±0
Information
225 m /h
DC axial fans
3
 119 x 25 mm
–
–
DC axial fans
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
DC centrifugal fans
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 22,
TR 64
Weight:
240 g
– Material:
5 400
-20...+70
60 000 / 30 000
102 500
8.3
4 850
-20...+70
60 000 / 30 000
102 500
6.7
12
5 400
-20...+70
60 000 / 30 000
102 500
6.7
12
5 400
-20...+70
60 000 / 30 000
102 500
Air flow
Nominal voltage
Voltage range
VDC
VDC
4412 FNH
225
132
12
9...13.2
55
6.7
12
4414 FNN
200
118
24
14...28
52
6.5
4414 FNH
225
132
24
18...26.4
55
4418 FNH
225
132
48
36...53
55
dB(A) Bel(A)
DC fans - specials
Hours
cfm
¡
¿
¡
¡
ACmaxx / EC fans
Hours
m3/h
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
°C
Type
Nominal data
Service life L10 (40 °C)
ebm-papst standard
rpm-1
Sound power level
Temperature range
Power consumption
Watts
Nominal speed
Sintec sleeve bearings
Ball bearings
/
Air flow
Series 4400 FN
Sound pressure level
1) Fiberglass-reinforced plastic
AC centrifugal fans
AC axial fans
Subject to change
ted
Accessories
Tin-p
la
Finger guards
from p. 242
55
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Representatives
Max.
Max.
204 m /h
DC axial fans
3
 119 x 32 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Clockwise,
looking towards rotor
Connection:
Via single wires AWG 22,
TR 64
Highlights:
Ball bearings and sleeve
bearings available
Weight:
220 g
– Material:
–
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
- Salt spray protection
- Degree of protection: IP 54 / IP 68
dB(A) Bel(A)
Hours
4312 GL
95
56
12
6...15
30
4.3
1.2
1 550
-20...+75
80 000 / 35 000
135 000
4312 L
95
56
12
6...15
30
4.3
1.2
1 550
-20...+75
80 000 / 35 000
135 000
4312 GM
140
82
12
6...15
39
5.3
3.1
2 300
-20...+75
70 000 / 30 000
117 500
4312 M
140
82
12
6...15
39
5.3
3.1
2 300
-20...+75
70 000 / 30 000
117 500
4312 G
170
100
12
6...15
45
5.8
5.0
2 800
-20...+70
62 500 / 30 000
105 000
4312
170
100
12
6...15
45
5.8
5.0
2 800
-20...+70
62 500 / 30 000
105 000
4312-179
204
120
12
6...13.2
51
6.4
9.4
3 400
-20...+65
47 500 / 27 500
80 000
4314 L
95
56
24
12...28
30
4.3
1.2
1 550
-20...+75
80 000 / 35 000
135 000
4314 M
140
82
24
12...28
39
5.3
2.8
2 300
-20...+75
70 000 / 30 000
117 500
4314 G
170
100
24
12...28
45
5.8
4.7
2 800
-20...+75
62 500 / 27 500
105 000
4314
170
100
24
12...28
45
5.8
5.0
2 800
-20...+75
62 500 / 27 500
105 000
4314-147
180
106
24
12...28
47
6.1
4.7
3 000
-20...+75
57 500 / 25 000
80 000
4314-180
204
120
24
12...26
51
6.4
8.5
3 400
-20...+70
45 000 / 22 500
75 000
4318 M
140
82
48
36...56
39
5.3
3.6
2 300
-20...+75
70 000 / 30 000
117 500
4318
170
100
48
36...53
45
5.8
5.1
2 800
-20...+75
62 500 / 27 500
105 000
Subject to change
Rotor protrusion max. 0.4 mm.
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
2016-01
Hours
56
Finger guards
from p. 242
Tin-p
la
ted
Curve
°C
Life expectancy L10IPC
(40 °C) see page 17
rpm-1
Service life L10 (Tmax)
ebm-papst standard
Watts
Service life L10 (40 °C)
ebm-papst standard
/
Temperature range
VDC
Nominal speed
VDC
Power consumption
cfm
Sintec sleeve bearings
Ball bearings
Voltage range
m3/h
Sound power level
Nominal voltage
Type
Air flow
Nominal data
Air flow
Series 4300
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¿
¡
¡
¬
¬
ƒ
¿
¡
¬
¬
√
ƒ
¡
¬
Information
170 m /h
DC axial fans
3
 119 x 32 mm
–
–
–
DC axial fans
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
DC centrifugal fans
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Clockwise,
looking towards rotor
Connection:
Via single wires AWG 22,
TR 64
Highlights:
Speed automatically adjusted
to cooling requirement
Weight:
220 g
– Material:
85
50
170
100
85
50
170
100
12
8...15
12
8...13.2
24
18...32
rpm-1
°C
Hours
Hours
-20...+65
70 000 / 40 000
117 500
-20...+65
65 000 / 35 000
110 000
-20...+65
65 000 / 35 000
110 000
25
3.9
1.1
1 100
39
5.3
3.3
2 300
29
4.2
1.7
1 400
45
5.8
5.0
2 800
29
4.2
1.6
1 400
45
5.8
4.8
2 800
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Power consumption
Watts
Service life L10 (40 °C)
ebm-papst standard
Sintec sleeve bearings
Ball bearings
/
DC fans - specials
38
81
dB(A) Bel(A)
¿
¡
¬
√
ACmaxx / EC fans
65
138
Sound power level
Voltage range
VDC
¬
√
AC axial fans
Subject to change
AC centrifugal fans
The temperature sensor for controlling the motor speed is not included
in the scope of delivery.
For the temperature sensor LZ 370,
see accessories.
Rotor protrusion max. 0.4 mm.
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Finger guards
from p. 242
Accessories
50°C
4314 T
VDC
Tin-p
la
ted
57
2016-01
30°C
4312 T
cfm
Temperature range
25°C
50°C
4312 MT
m3/h
Nominal speed
25°C
50°C
Nominal voltage
Type
Air flow
Nominal data
Air flow
Series 4300
VARIOFAN
Sound pressure level
1) Fiberglass-reinforced plastic
Representatives
Max.
Max.
205 m /h
DC axial fans
3
 119 x 38 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Clockwise,
looking towards rotor
Connection:
Via single wires AWG 24,
TR 64
Weight:
270 g
– Material:
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
- Degree of protection: IP 54
m3/h
cfm
VDC
VDC
4412 L
150
88
12
7...14
37
5.0
2.2
2 700
-20...+80
67 500 / 22 500
115 000
4412 ML
168
99
12
7...15
40
5.1
3.0
3 000
-20...+80
67 500 / 22 500
115 000
4412 M
184
108
12
7...14
42
5.3
3.8
3 300
-20...+75
65 000 / 25 000
110 000
4412 N
205
121
12
7...14
46
5.6
5.3
3 650
-20...+70
62 500 / 30 000
105 000
4414 L3
100
59
24
12...28
26
4.0
1.0
1 800
-20...+80
75 500 / 22 500
127 500
4414 LL
124
73
24
12...28
33
4.5
1.6
2 250
-20...+80
70 000 / 22 500
117 500
4414 L
150
88
24
18...28
37
5.0
2.4
2 700
-20...+80
67 500 / 22 500
115 000
4414 ML
168
99
24
12...28
40
5.1
3.2
3 000
-20...+80
67 500 / 22 500
115 000
4414 M
184
108
24
18...28
42
5.3
4.1
3 300
-20...+75
65 000 / 25 000
110 000
4414 N
205
121
24
18...28
46
5.6
5.4
3 650
-20...+70
62 500 / 30 000
105 000
4418 L
150
88
48
36...60
37
5.0
2.5
2 700
-20...+75
67 500 / 27 500
115 000
4418 ML
168
99
48
36...60
40
5.1
3.2
3 000
-20...+75
67 500 / 27 500
115 000
4418 M
184
108
48
36...60
42
5.3
4.2
3 300
-20...+70
65 000 / 32 500
110 000
4418 N
205
121
48
36...60
46
5.6
5.4
3 650
-20...+70
62 500 / 30 000
105 000
dB(A) Bel(A)
Subject to change
Further variants can be found on page 59.
Tin-p
la
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
58
Finger guards
from p. 242
ted
Hours
Hours
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Type
Nominal data
2016-01
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption
Nominal speed
Sintec sleeve bearings
Ball bearings
Sound power level
°C
Voltage range
rpm-1
Nominal voltage
Watts
Air flow
/
Air flow
Series 4400
Sound pressure level
1) Fiberglass-reinforced plastic
¬
√
ƒ
≈
¿
¡
¬
√
ƒ
≈
¬
√
ƒ
≈
Information
285 m /h
DC axial fans
3
 119 x 38 mm
–
–
DC axial fans
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
- Degree of protection: IP 54
DC centrifugal fans
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Clockwise,
looking towards rotor
Connection:
Via single wires AWG 24,
TR 64
Weight:
270 g
– Material:
-20...+70
57 500 / 27 500
97 500
-20...+70
50 000 / 25 000
85 000
4 300
-20...+70
57 500 / 27 500
97 500
5 000
-20...+70
50 000 / 25 000
85 000
12.0
5 000
-20...+70
50 000 / 25 000
85 000
6.0
8.6
4 300
-20...+70
57 500 / 27 500
97 500
6.4
13.0
5 000
-20...+70
50 000 / 25 000
85 000
Air flow
Nominal voltage
Voltage range
VDC
VDC
4412 H
240
141
12
7...14
50
6.0
8.6
4412/2 HHP
285
168
12
7...14.5
55
6.4
13.0
4414 H
240
141
24
18...28
50
6.0
8.6
4414 HH
285
165
24
16...28
55
6.4
14.0
4414/2 HHP
285
168
24
18...28
55
6.4
4418 H
240
141
48
36...60
50
4418/2 HHP
285
168
48
36...60
55
dB(A) Bel(A)
Hours
DC fans - specials
4 300
5 000
cfm
¿
¡
¿
¡
¡
ACmaxx / EC fans
Hours
m3/h
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
°C
Type
Nominal data
Service life L10 (40 °C)
ebm-papst standard
rpm-1
Sound power level
Temperature range
Power consumption
Watts
Nominal speed
Sintec sleeve bearings
Ball bearings
/
Air flow
Series 4400
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
AC centrifugal fans
AC axial fans
Subject to change
ted
Accessories
Tin-p
la
Finger guards
from p. 242
59
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Representatives
Max.
Max.
237 m /h
DC axial fans
3
 119 x 38 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Intake over struts
- Go / NoGo alarm
Direction of rotation: Clockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
On flat connectors, 2.8 x 0.5 mm
- Internal temperature sensor
Also available with wires as
- PWM control input
an option
- Analog control input
Highlights:
Housing with grounding lug for
- Moisture protection
screw M4 x 8 (Torx)
- Salt spray protection
Weight:
390 g
- Degree of protection: IP 54 / IP 68
– Material:
–
–
–
–
–
dB(A) Bel(A)
Hours
Hours
160
94
12
6...15
44
5.3
3.7
2 800
-20...+75
85 000 / 37 500
142 500
4182 NX
180
106
12
6...15
49
5.7
4.9
3 200
-30...+75
85 000 / 37 500
142 500
4182 NXH
237
140
12
7...14
57
6.5
11.0
4 400
-30...+55
70 000 / 50 000
117 500
4184 NGX
160
94
24
12...31.5
44
5.3
3.3
2 800
-20...+75
85 000 / 37 500
142 500
4184 NXM
160
94
24
12...31.5
44
5.3
3.2
2 800
-30...+75
85 000 / 37 500
142 500
4184 NX
180
106
24
12...31.5
49
5.7
4.9
3 200
-30...+70
85 000 / 42 500
142 500
4184 NXH
237
140
24
12...28
57
6.5
11.0
4 400
-30...+70
70 000 / 35 000
117 500
4188 NGX
160
94
48
36...60
44
5.3
3.6
2 800
-20...+75
85 000 / 37 500
142 500
4188 NXM
160
94
48
36...60
44
5.3
3.5
2 800
-30...+75
85 000 / 37 500
142 500
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
60
Finger guards
from p. 242
Cables
P. 255
Curve
Life expectancy L10IPC
(40 °C) see page 17
°C
4182 NGX
Subject to change
2016-01
rpm-1
Service life L10 (Tmax)
ebm-papst standard
Watts
Service life L10 (40 °C)
ebm-papst standard
/
Temperature range
VDC
Nominal speed
VDC
Power consumption
cfm
Sintec sleeve bearings
Ball bearings
Voltage range
m3/h
Sound power level
Nominal voltage
Type
Air flow
Nominal data
Air flow
Series 4100 N
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
¬
¿
¿
¡
¬
¿
¿
440 m /h
Information
Max.
DC axial fans
3
 119 x 38 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Intake over struts
- Go / NoGo alarm
Direction of rotation: Clockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
Via single wires
- Internal temperature sensor
AWG 22 UL 1007,
- PWM control input
TR 64
- Analog control input
Highlights:
Housing with grounding lug for
- Moisture protection
screw M4 x 8 (Torx)
- Salt spray protection
Weight:
390 g
- Degree of protection:IP 54 / IP 68
–
–
–
5 000
-20...+65
70 000 / 55 000
117 500
6 000
-20...+65
65 000 / 37 500
110 000
32.0
6 800
-20...+65
62 500 / 35 000
105 000
6.8
12.4
5 000
-20...+65
70 000 / 52 500
117 500
7.2
19.5
6 000
-20...+65
65 000 / 37 500
110 000
Air flow
Nominal voltage
Voltage range
VDC
4112 NHH
260
153
12
9...15
60
6.8
13.3
4112 NH3
310
182
12
9...15
65
7.2
21.6
4112 NH4
355
209
12
9...14
67
7.4
4114 NHH
260
153
24
16...30
60
4114 NH3
310
182
24
16...30
65
4114 NH4
355
209
24
16...30
67
7.4
30.0
6 800
-20...+65
62 500 / 35 000
105 000
4114 NH5
390
230
24
16...30
70
7.6
45.0*
7 500
-20...+65
62 500 / 35 000
105 000
4114 NH6
440
259
24
16...30
73
8.1
65.0*
8 400
-20...+65
60 000 / 32 500
102 500
4118 NHH
260
153
48
36...60
60
6.8
12.0
5 000
-20...+65
70 000 / 52 500
117 500
4118 NH3
310
182
48
36...60
65
7.2
20.0
6 000
-20...+65
65 000 / 37 500
110 000
4118 NH4
355
209
48
36...60
67
7.4
28.0
6 800
-20...+65
62 500 / 35 000
105 000
4118 NH5
390
230
48
36...60
70
7.6
45.0*
7 500
-20...+65
62 500 / 35 000
105 000
4118 NH6
440
259
48
36...60
73
8.1
62.0*
8 400
-20...+65
60 000 / 32 500
102 500
¿
¡
¬
¿
¡
¬
√
ƒ
¿
¡
¬
√
ƒ
* Power consumption at free air flow. These values can be significantly higher in the operating point.
4114 NH5
55
4114 NH6
95
4118 NH5
55
4118 NH6
95
Tin-p
la
ted
Accessories
optimum
operating range (W)
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Finger guards
from p. 242
61
Representatives
Fan type
AC centrifugal fans
* Power consumption – in operation
2016-01
Subject to change
dB(A) Bel(A)
DC fans - specials
Hours
VDC
ACmaxx / EC fans
Hours
cfm
Type
AC axial fans
°C
m3/h
Nominal data
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Service life L10 (40 °C)
ebm-papst standard
rpm-1
Sound power level
Temperature range
Power consumption*
Watts
Nominal speed
Sintec sleeve bearings
Ball bearings
/
Air flow
Series 4100 N
High Performance
Sound pressure level
1) Fiberglass-reinforced plastic
DC centrifugal fans
–
–
DC axial fans
– Material:
Max.
570 m /h
DC axial fans
3
 119 x 38 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Intake over struts
- Go / NoGo alarm
Direction of rotation: Clockwise, looking
- Alarm with speed limit
towards rotor
- External temperature sensor
Connection:
Via single wires AWG 18, 20 or
- Internal temperature sensor
AWG 22, TR 64, speed signal
- PWM control input (standard)
and control input AWG 22
- Analog control input
Highlights:
Highly efficient and smoothly
- Moisture protection
operating 3-phase fan drive
- Salt spray protection
Housing with grounding lug for
screw M4 x 8 (Torx)
Weight:
425 g
– Material:
–
–
–
–
–
m3/h
cfm
VDC
VDC
4114 N/2 H7P
500
294
24
16...30
76
8.5
90
9 500
-20...+75
57 500 / 25 000
97 500
4114 N/2 H8P
570
336
24
16...30
78
8.9
120
11 000
-20...+75
55 000 / 22 500
92 500
4118 N/2 H7P
500
294
48
36...60*
76
8.5
90
9 500
-20...+75
57 500 / 25 000
97 500
4118 N/2 H8P
570
336
48
36...60*
78
8.9
120
11 000
-20...+75
55 000 / 22 500
92 500
Subject to change
* 36...72 VDC on request.
dB(A) Bel(A)
Speed control range from 500 rpm-1 up to maximum nominal speed.
Standstill at 0% PWM, maximum speed if control cable is interrupted.
To attain the specified service life, an external capacitor must be wired
between the plus and minus strands. Please note the wiring suggestion on page 16.
** Power consumption at free air flow, these values can be significantly higher in the operating point.
** Power consumption - in operation
Fan type
optimum
operating range (W)
4114 NH7P
100
4114 NH8P
160
4118 NH7P
100
4118 NH8P
160
Tin-p
la
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
62
Finger guards
from p. 242
ted
Hours
Hours
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Type
Nominal data
2016-01
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption**
Nominal speed
Sintec sleeve bearings
Ball bearings
Sound power level
°C
Voltage range
rpm-1
Nominal voltage
Watts
Air flow
/
Air flow
Series 4100 N
High Performance
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
¿
¡
280 m /h
Information
Max.
DC diagonal fan
3
 119 x 38 mm
– Possible special versions:
Housing: GRP1) (PBT)
(See chapter DC fans - specials)
Available in die-cast aluminum
- Speed signal
Impeller: GRP1) (PA)
- Go / NoGo alarm
Direction of air flow: Exhaust over struts
- Alarm with speed limit
Direction of rotation: Counterclockwise,
- External temperature sensor
looking towards rotor
- Internal temperature sensor
Connection:
Via single wires AWG 22,
- PWM control input
TR 64
- Analog control input
Highlights:
Housing with grounding lug for
- Moisture protection
screw M4 x 8 (Torx)
- Salt spray protection
Weight:
375 g (with metal housing: 455 g)
- Degree of protection: IP 54 / IP 68
–
–
–
-20...+65
70 000 / 40 000
117 500
20.5
6 000
-20...+65
70 000 / 40 000
117 500
20.0
6 000
-20...+65
70 000 / 40 000
117 500
VDC
VDC
DV 4112 N
280
165
12
9...15
61
6.9
21.0
DV 4114 N
280
165
24
16...30
61
6.9
DV 4118 N
280
165
48
36...60
61
6.9
DC fans - specials
6 000
cfm
Curve
Life expectancy L10IPC
(40 °C) see page 17
Hours
m3/h
dB(A) Bel(A)
Service life L10 (Tmax)
ebm-papst standard
Hours
Type
¿
¿
¿
ACmaxx / EC fans
Subject to change
Finger guards
from p. 242
Tin-p
la
ted
63
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Accessories
AC centrifugal fans
AC axial fans
* Power consumption at free air flow. These values can be significantly higher in the operating point.
Representatives
Nominal data
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption*
°C
Voltage range
rpm-1
Nominal voltage
Nominal speed
Sintec sleeve bearings
Ball bearings
Watts
Air flow
Sound power level
/
Air flow
Series DV 4100
Sound pressure level
1) Fiberglass-reinforced plastic
DC centrifugal fans
–
–
DC axial fans
– Material:
Max.
340 m /h
DC axial fans
3
 127 x 38 mm
Housing: GRP1) (PBT)
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 22,
TR 64
Weight:
310 g
– Material:
–
–
–
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
- Salt spray protection
- Degree of protection: IP 54 / IP 68
Type
m3/h
cfm
VDC
VDC
5212 NM
187
110
12
7...14.5
43
5.3
4.1
2 750
5212 NN
216
127
12
7...14
46
5.6
6.2
3 150
5212 NH
252
148
12
7...14
51
6.0
9.8
3 650
-20...+70
45 000 / 22 500
75 000
5212 NHH*
340
200
12
9...15
58
6.6
19.0
4 900
-20...+65
45 000 / 25 000
75 000
5214 NM
187
110
24
12...28
43
5.3
4.6
2 750
-20...+75
62 500 / 27 500
105 000
5214 NN
216
127
24
12...28
46
5.6
6.0
3 150
-20...+75
57 500 / 25 000
97 500
5214 NH
252
148
24
12...28
51
6.0
9.8
3 650
-20...+70
45 000 / 22 500
75 000
5214 NHH*
340
200
24
16...30
58
6.6
17.5
4 900
-20...+65
45 000 / 25 000
75 000
5218 NM
187
110
48
36...56
43
5.3
4.5
2 750
-20...+75
62 500 / 27 500
105 000
5218 NN
216
127
48
36...56
46
5.6
6.2
3 150
-20...+70
57 500 / 32 500
97 500
5218 NH
252
148
48
36...56
51
6.0
9.6
3 650
-20...+55
45 000 / 32 500
75 000
5218 NHH*
340
200
48
36...60
58
6.6
18.0
4 900
-20...+65
45 000 / 25 000
75 000
Nominal data
Subject to change
dB(A) Bel(A)
Hours
Hours
-20...+75
62 500 / 27 500
105 000
-20...+70
57 500 / 25 000
97 500
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption**
Nominal speed
Sintec sleeve bearings
Ball bearings
Sound power level
°C
Voltage range
rpm-1
Nominal voltage
Watts
Air flow
/
Air flow
Series 5200 N
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
¬
√
¿
¡
¬
√
¿
¡
¬
√
** Power consumption at free air flow, these values can be significantly higher in the operating point.
*NHH models: fan housing
with molded-in spacers.
Tin-p
la
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axi.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parametersmust be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
64
Finger guards
from p. 242
ted
320 m /h
Information
Max.
DC diagonal fan
3
 127 x 38 mm
– Possible special versions:
Housing: GRP1) (PBT)
(See chapter DC fans - specials)
Available in Die-cast aluminum
- Speed signal
Metal flange
- Go / NoGo alarm
Impeller: GRP1) (PA)
- Alarm with speed limit
Direction of air flow: Exhaust over struts
- External temperature sensor
Direction of rotation: Counterclockwise,
- Internal temperature sensor
looking towards rotor
- PWM control input
Connection:
Via single wires AWG 22,
- Analog control input
TR 64
- Moisture protection
Highlights:
Housing with grounding lug for
- Salt spray protection
screw M4 x 8 (Torx)
- Degree of protection: IP 54
Weight:
415 g (with metal housing: 490 g)
–
–
–
DC centrifugal fans
–
–
DC axial fans
– Material:
-20...+65
70 000 / 40 000
117 500
20.4
5 000
-20...+65
70 000 / 40 000
117 500
18.5
5 000
-20...+65
70 000 / 40 000
117500
¿
38.5
6 000
-20...+65
62 500 / 35 000
105 000
¡
VDC
DV 5212 N
270
159
12
9...15
56
6.4
21.0
DV 5214 N
270
159
24
16...30
56
6.4
DV 5218 N
270
159
48
36...60
56
6.4
Standard model comes with speed signal and PWM control input. Other versions by request.
320
188
24
16...30
62
7.2
¿
¿
Subject to change
AC centrifugal fans
AC axial fans
Speed control range from 1000 rpm-1 up to maximum nominal speed.
Standstill at 0% PWM, maximum speed if control cable is interrupted.
* Power consumption at free air flow. These values can be significantly higher in the operating point.
ted
Accessories
Tin-p
la
Finger guards
from p. 242
65
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Representatives
DV 5214/2 HP
DC fans - specials
VDC
Curve
5 000
cfm
ACmaxx / EC fans
Life expectancy L10IPC
(40 °C) see page 17
Hours
m3/h
dB(A) Bel(A)
Service life L10 (Tmax)
ebm-papst standard
Hours
Type
Nominal data
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption*
°C
Voltage range
rpm-1
Nominal voltage
Nominal speed
Sintec sleeve bearings
Ball bearings
Watts
Air flow
Sound power level
/
Air flow
Series DV 5200
Sound pressure level
1) Fiberglass-reinforced plastic
260 m /h
DC axial fans
3
 135 x 38 mm
-25...+72
80 000 / 37 500
135 000
9.5
2 900
-25...+72
80 000 / 37 500
135 000
9.5
2 900
-25...+72
80 000 / 37 500
135 000
cfm
VDC
VDC
5112 N
260
153
12
6...15
48
6.1
9.5
5114 N
260
153
24
12...30
48
6.1
5118 N
260
153
48
24...60
48
6.1
Subject to change
* Power consumption at free air flow. These values can be significantly higher in the operating point.
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
66
Finger guards
from p. 242
Tin-p
la
ted
Curve
2 900
m3/h
dB(A) Bel(A)
Life expectancy L10IPC
(40 °C) see page 17
Hours
Voltage range
Hours
Nominal voltage
°C
Air flow
rpm-1
Type
Nominal data
Service life L10 (40 °C)
ebm-papst standard
Watts
Temperature range
/
Air flow
Series 5100 N
Sound pressure level
–
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
- Salt spray protection
- Degree of protection: IP 54
Nominal speed
–
Power consumption*
–
Sintec sleeve bearings
Ball bearings
–
–
Housing: Die-cast aluminum
Impeller: painted sheet steel
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 22,
TR 64
Highlights:
Housing with grounding lug for
screw M4 x 8 (Torx)
48 V design incl. screws.
Weight:
650 g
Sound power level
– Material:
Service life L10 (Tmax)
ebm-papst standard
Max.
¿
¿
¿
340 m /h
Information
Max.
DC axial fans
3
 140 x 51 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Intake over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
Via single wires AWG 22,
- Internal temperature sensor
TR 64
- PWM control input
Highlights:
Housing with grounding lug for
- Analog control input
screw M4 x 8 (Torx)
- Moisture protection
Weight:
900 g
- Salt spray protection
- Degree of protection: IP 54
–
–
–
DC centrifugal fans
–
–
DC axial fans
– Material:
340
200
24
16...28
64
7.2
28.4
5318/2 HP
340
200
48
36...72
64
7.2
27
rpm-1
°C
Hours
Hours
5 000
-20...+65
77 500 / 40 000
130 000
5 000
-20...+65
77 500 / 40 000
130 000
DC fans - specials
5314/2 HP
dB(A) Bel(A)
Curve
VDC
Life expectancy L10IPC
(40 °C) see page 17
VDC
Service life L10 (Tmax)
ebm-papst standard
cfm
Service life L10 (40 °C)
ebm-papst standard
m3/h
Temperature range
Power consumption*
Type
Nominal data
Nominal speed
Sintec sleeve bearings
Ball bearings
Voltage range
Sound power level
Nominal voltage
Watts
Air flow
/
Air flow
Series 5300
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¿
Subject to change
AC centrifugal fans
AC axial fans
ACmaxx / EC fans
Speed control range from 700 rpm-1 up to maximum nominal speed.
Standstill at 0% PWM, maximum speed if control cable is interrupted.
* Power consumption at free air flow. These values can be significantly higher in the operating point.
Accessories
ted
Finger guards
from p. 242
67
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Representatives
Tin-p
la
Max.
670 m /h
DC axial fans
3
 140 x 51 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Intake over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
Via single wires AWG 20 and
- Internal temperature sensor
AWG 22, TR 64
- PWM control input
Highlights:
3-phase fan drive with
- Analog control input
very smooth operation
- Multi-option control input
Housing with grounding lug for
- Moisture protection
screw M4 x 8 (Torx)
- Salt spray protection
Weight:
900 g
- Degree of protection: IP 54
– Material:
–
–
–
–
–
6 000
-20...+70
70 000 / 35 000
117 500
42
6 000
-20...+70
70 000 / 35 000
117 500
8.1
67
7 000
-20...+70
62 500 / 30 000
105 000
70
7.7
42
6 000
-20...+70
70 000 / 35 000
117 500
75
8.1
66
7 000
-20...+70
62 500 / 30 000
105 000
79
8.8
149
9 200
-20...+65
57 500 / 32 500
97 500
Air flow
Nominal voltage
Voltage range
VDC
5312/2 TDHP
410
241
12
8...16
70
7.7
43
5314/2 TDHP
410
241
24
16...36
70
7.7
5314/2 TDHHP
490
288
24
16...36
75
5318/2 TDHP
410
241
48
36...72
5318/2 TDHHP
490
288
48
36...72
5318/2 TDH4P
670
394
48
36...72
dB(A) Bel(A)
Subject to change
Speed control range from 1000 rpm-1 up to maximum nominal speed.
Standstill at 0% PWM, maximum speed if control cable is interrupted.
* Power consumption at free air flow. These values can be significantly higher in the operating point.
Tin-p
la
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Finger guards
from p. 242
ted
Curve
Hours
VDC
68
Life expectancy L10IPC
(40 °C) see page 17
Hours
cfm
Type
Service life L10 (Tmax)
ebm-papst standard
°C
m3/h
Nominal data
Service life L10 (40 °C)
ebm-papst standard
rpm-1
Sound power level
Temperature range
Power consumption*
Watts
Nominal speed
Sintec sleeve bearings
Ball bearings
/
Air flow
Series 5300 TD
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¿
¡
¿
¡
¬
360 m /h
Information
Max.
DC axial fans
3
Ø 150 x 38 mm
Housing: Die-cast aluminum – Possible special versions:
(See chapter DC fans - specials)
Impeller: painted sheet steel
- Speed signal
Direction of air flow: Exhaust over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
Via single wires AWG 22,
- Internal temperature sensor
TR 64
- PWM control input
Highlights:
Housing with grounding lug for
- Analog control input
screw M4 x 8 (Torx)
- Moisture protection
Weight:
620 g
- Salt spray protection
- Degree of protection:IP 54 / IP 68
2 850
-25...+72
80 000 / 37 500
135 000
12.0
2 850
-25...+72
80 000 / 37 500
135 000
6.7
19.0
3 350
-25...+72
75 000 / 35 000
127 500
6.2
12.0
2 850
-25...+72
80 000 / 37 500
135 000
Air flow
Nominal voltage
Voltage range
VDC
7112 N
308
181
12
6...15
53
6.2
12.0
7114 N
308
181
24
12...30
53
6.2
7114 NH
360
212
24
12...26.5
58
7118 N
308
181
48
24...60
53
dB(A) Bel(A)
DC axial fans
DC centrifugal fans
Hours
VDC
DC fans - specials
Hours
cfm
¿
¿
¡
¿
ACmaxx / EC fans
°C
m3/h
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
rpm-1
Type
Subject to change
AC centrifugal fans
AC axial fans
* Power consumption at free air flow. These values can be significantly higher in the operating point.
Finger guards
from p. 242
Tin-p
la
ted
69
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Accessories
Wire fastened with cable tie.
Strand fastened using cable tie;
cable tie protrudes 1 mm.
Representatives
Nominal data
Service life L10 (40 °C)
ebm-papst standard
Watts
Temperature range
/
Air flow
Series 7100 N
Sound pressure level
–
Nominal speed
–
Power consumption*
–
Sound power level
–
–
Sintec sleeve bearings
Ball bearings
– Material:
Max.
360 m /h
DC axial fans
3
Ø 150 x 55 mm
– Material:
–
–
–
–
–
Housing: Die-cast aluminum
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 22,
TR 64
Highlights:
Housing with grounding lug for
screw M4 x 8 (Torx)
Weight:
725 g
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input
- Analog control input
- Moisture protection
- Salt spray protection
- Degree of protection: IP 54 / IP 68
-25...+72
80 000 / 37 500
135 000
12.0
3 050
-25...+72
80 000 / 37 500
135 000
12.0
3 050
-25...+72
80 000 / 37 500
135 000
VDC
VDC
7212 N
360
212
12
6...15
53
6.2
12.0
7214 N
360
212
24
12...30
53
6.2
7218 N
360
212
48
24...60
53
6.2
Subject to change
* Power consumption at free air flow. These values can be significantly higher in the operating point.
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Finger guards
from p. 242
Tin-p
la
ted
Curve
3 050
cfm
70
Life expectancy L10IPC
(40 °C) see page 17
Hours
m3/h
dB(A) Bel(A)
Service life L10 (Tmax)
ebm-papst standard
Hours
Type
Nominal data
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption*
°C
Voltage range
rpm-1
Nominal voltage
Nominal speed
Sintec sleeve bearings
Ball bearings
Watts
Air flow
Sound power level
/
Air flow
Series 7200 N
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¿
¿
480 m /h
Information
Max.
DC axial fans
3
172 x 150 x 51 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Exhaust over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
on flat plugs 3 x 0.5 mm
- Internal temperature sensor
Highlights:
Housing with grounding lug for
- PWM control input
screw M4 x 8 (Torx)
- Analog control input
Weight:
760 g
- Moisture protection
- Salt spray protection
- Degree of protection: IP 54
–
–
–
DC centrifugal fans
–
–
DC axial fans
– Material:
-20...+72
80 000 / 37 500
135 000
12
2 850
-20...+72
80 000 / 37 500
135 000
6.4
17
3 400
-20...+72
75 000 / 35 000
127 500
7.1
26
4 000
-20...+55**
70 000 / 50 000
117 500
57
6.4
17
3 400
-20...+72
75 000 / 35 000
127 500
63
7.1
26
4 000
-20...+55**
70 000 / 50 000
117 500
Air flow
Nominal voltage
Voltage range
VDC
6412 M
350
206
12
8...15
52
6.0
12
6424 M
350
206
24
12...32
52
6.0
6424
410
241
24
12...28
57
6424 H
480
283
24
12...28
63
6448
410
241
48
28...60
6448 H*
480
283
48
28...60
dB(A) Bel(A)
DC fans - specials
2 850
VDC
¿
¿
¡
¬
ACmaxx / EC fans
Hours
cfm
Curve
Life expectancy L10IPC
(40 °C) see page 17
Hours
m3/h
¡
¬
Finger guards
from p. 242
Cables
P. 255
7.5 d
eep
71
Representatives
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Accessories
AC centrifugal fans
AC axial fans
* Strand 310 mm.
** 72 °C versions on request
*** Power consumption at free air flow, these values can be significantly higher in the operating point.
2016-01
Subject to change
Service life L10 (Tmax)
ebm-papst standard
°C
Type
Nominal data
Service life L10 (40 °C)
ebm-papst standard
rpm-1
Sound power level
Temperature range
Power consumption***
Watts
Nominal speed
Sintec sleeve bearings
Ball bearings
/
Air flow
Series 6400
Sound pressure level
1) Fiberglass-reinforced plastic
Max.
900 m /h
DC axial fans
3
172 x 150 x 51 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Exhaust over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
Via single wires AWG 18, 20 or
- Internal temperature sensor
AWG 22, TR 64, speed signal
- PWM control input
and control input AWG 22
- Analog control input
Highlights:
Highly efficient and smoothly
- Moisture protection
operating 3-phase fan drive
- Salt spray protection
Housing with grounding lug
- Degree of protection: IP 54
for screw M4 x 8 (Torx)
- Reversible direction of rotation
Weight:
760 g
– Material:
–
–
–
–
–
Min
6448 TD...
Max
Min
6448 TDHH...
Max
Subject to change
90
53
600
353
90
53
600
353
90
53
900
530
24
16...28
48
40...55*
48
36...72
dB(A) Bel(A)
rpm-1
°C
Hours
Hours
-20...+60
70 000 / 45 000
117 500
-20...+60
70 000 / 45 000
117 500
-20...+60
70 000 / 45 000
117 500
18
—
2
800
65
7.4
50
5 100
18
—
2
800
65
7.4
50
5 100
18
—
2
800
78
8.6
163
7500
Curve
Life expectancy L10IPC
(40 °C) see page 17
Watts
Service life L10 (Tmax)
ebm-papst standard
/
Service life L10 (40 °C)
ebm-papst standard
Power consumption**
VDC
Sintec sleeve bearings
Ball bearings
VDC
Sound power level
Voltage range
cfm
Temperature range
6424 TD...
m3/h
Nominal speed
Min
Max
Nominal voltage
Type
Air flow
Nominal data
Air flow
Series 6400 TD
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
¿
¡
¿
¬
* Variants with an extended voltage range available on request.
Models 6424 TD..., 6448 TD... and 6448 TDHH... are available in customer-specific, custom-developed variants only.
The figures indicated are technically feasible benchmark values. The fans can be specially adapted to your application with signal
outputs and control inputs.
For details of the technical possibilities, refer to the chapters on the sensor signal, alarm signal and control inputs beginning on page 165.
** Power consumption at free air flow, these values can be significantly higher in the operating point.
Tin-plate
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
72
Finger guards
from p. 242
(7.5 deep)
d
Information
Max.
DC diagonal fan
530 m /h
3
172 x 160 x 51 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Exhaust over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
Via single wires AWG 22,
- Internal temperature sensor
TR 64
- PWM control input
Highlights:
Housing with grounding lug for
- Analog control input
screw M4 x 8 (Torx)
- Moisture protection
Weight:
820 g
- Salt spray protection
- Degree of protection: IP 54
–
–
–
DC centrifugal fans
–
–
DC axial fans
– Material:
530
312
24
16...28
65
7.3
40
DV 6448
530
312
48
28...60
65
7.3
40
rpm-1
°C
Hours
Hours
4 300
-20...+75
90 000 / 35 000
152 500
4 300
-20...+75
90 000 / 35 000
152 500
DC fans - specials
DV 6424
dB(A) Bel(A)
Curve
VDC
Life expectancy L10IPC
(40 °C) see page 17
VDC
Service life L10 (Tmax)
ebm-papst standard
cfm
Service life L10 (40 °C)
ebm-papst standard
m3/h
Temperature range
Power consumption
Type
Nominal data
Nominal speed
Sintec sleeve bearings
Ball bearings
Voltage range
Sound power level
Nominal voltage
Watts
Air flow
/
Air flow
Series DV 6400
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¿
Finger guards
from p. 242
Accessories
(7.5
deep
)
73
Representatives
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
ted
2016-01
Tin-p
la
AC centrifugal fans
AC axial fans
ACmaxx / EC fans
Subject to change
Max.
680 m /h
DC diagonal fan
3
172 x 160 x 51 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Exhaust over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
Via single wires AWG 22,
- Internal temperature sensor
TR 64
- PWM control input
Highlights:
3-phase fan drive with very
- Analog control input
smooth operation and high effi- Moisture protection
ciency. Housing with grounding
- Salt spray protection
lug for screw M4 x 8 (Torx)
- Degree of protection: IP 54
Weight:
820 g
- Reversible direction of rotation
– Material:
–
–
–
–
–
24
16...28
Min
100
59
680
400
24
16...28
48
40...55
DV 6424 TD...
Max
Min
DV 6448 TD...
Max
100
59
680
400
rpm-1
°C
Hours
Hours
-20...+60
65 000 / 40 000
110 000
-20...+60
65 000 / 40 000
110 000
-20...+60
65 000 / 40 000
110 000
71
7.9
91
5 500
29
—
2
800
71
7.9
91
5 500
29
—
2
800
71
7.9
86
5 500
Curve
400
Watts
Life expectancy L10IPC
(40 °C) see page 17
680
/
Service life L10 (Tmax)
ebm-papst standard
DV 6424 TD
dB(A) Bel(A)
Service life L10 (40 °C)
ebm-papst standard
VDC
Temperature range
VDC
Nominal speed
Voltage range
cfm
Power consumption*
Nominal voltage
m3/h
Sintec sleeve bearings
Ball bearings
Air flow
Type
Nominal data
Sound power level
Air flow
Series DV 6400 TD
TURBOFAN
Sound pressure level
1) Fiberglass-reinforced plastic
¡
¿
¡
¿
¡
Subject to change
Models DV 6424 TD... and DV 6448 TD... are available in customer-specific, custom-developed variants only.
The figures indicated are technically feasible benchmark values. The fans can be specially adapted to your application with signal
outputs and control inputs.
For details of the technical possibilities, refer to the chapters on the sensor signal, alarm signal and control inputs beginning on page 165.
* Power consumption at free air flow. These values can be significantly higher in the operating point.
Tin-p
la
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
74
Finger guards
from p. 242
ted
(7.5
deep
)
930 m /h
Information
Max.
DC axial fans
3
172 x 160 x 51 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Exhaust over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
Via single wires AWG 18, 20 or
- Internal temperature sensor
AWG 22, TR 64, speed signal
- PWM control input (standard)
and control input AWG 22
- Analog control input
Highlights:
Highly efficient and smoothly
- Multi-option control input
operating 3-phase fan drive
- Moisture protection
Housing with grounding lug for
- Salt spray protection
screw M4 x 8 (Torx)
- Degree of protection: IP 54
Weight:
910 g
–
–
–
DC centrifugal fans
–
–
DC axial fans
– Material:
710
418
24
16...36
69
7.9
67
6318/2 TDH4P-007
930
546
48
36...72
75
8.4
150
°C
Hours
Hours
7 000
-20...+75
62 500 / 25 000
105 000
9 200
-20...+75
52 500 / 20 000
87 500
¿
¡
AC centrifugal fans
AC axial fans
ACmaxx / EC fans
Speed control range from 1000 rpm-1 up to maximum nominal speed.
Standstill at 0% PWM, maximum speed if control cable is interrupted.
* Power consumption at free air flow. These values can be significantly higher in the operating point.
Finger guards
from p. 242
Accessories
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
ted
7.6 d
eep
75
Representatives
Tin-p
la
2016-01
Subject to change
rpm-1
DC fans - specials
6314/2 TDHHP-015
dB(A) Bel(A)
Curve
VDC
Life expectancy L10IPC
(40 °C) see page 17
VDC
Service life L10 (Tmax)
ebm-papst standard
cfm
Service life L10 (40 °C)
ebm-papst standard
m3/h
Temperature range
Power consumption*
Type
Nominal data
Nominal speed
Sintec sleeve bearings
Ball bearings
Voltage range
Sound power level
Nominal voltage
Watts
Air flow
/
Air flow
Series 6300 TD
Sound pressure level
1) Fiberglass-reinforced plastic
Max.
685 m /h
DC axial fans
3
Ø 172 x 51 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Exhaust over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
(+) and GND AWG 20, UL 1007,
- Internal temperature sensor
TR 64; speed signal and alarm
- PWM control input (standard)
signal: AWG 22, UL 1007, TR 64
- Analog control input
Highlights:
Highly efficient and smoothly
- Multi-option control input
operating 3-phase fan drive
- Moisture protection
Housing with grounding lug for
- Salt spray protection
screw M4 x 8 (Torx)
- Degree of protection: IP 54 / IP 68
Weight:
850 g
– Material:
–
–
–
–
–
24
16…32
-
403
48
36…60
-
Subject to change
°C
Hours
Hours
6.9
30
4000
-20…+70
80 000 / 40 000
135 000
7.5
53
5000
-20…+70
77 500 / 40 000
130 000
Speed control range from 1000 rpm-1 up to maximum nominal speed. Standstill at 0% PWM,
maximum speed if control cable is interrupted.
Tin-plated
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
76
Finger guards
from p. 242
Ø 162+0,15
-0,3
Ø 166
Curve
318
685
rpm-1
Life expectancy L10IPC
(40 °C) see page 17
540
6318 N/2 H3P
Watts
Service life L10 (Tmax)
ebm-papst standard
6314 N/2 HHP
/
dB(A) Bel(A)
Service life L10 (40 °C)
ebm-papst standard
VDC
Temperature range
VDC
Nominal speed
Voltage range
cfm
Power consumption
Nominal voltage
m3/h
Sintec sleeve bearings
Ball bearings
Air flow
Type
Nominal data
Sound power level
Air flow
Series 6300 N
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
1030 m /h
Information
Max.
DC axial fans
3
Ø 172 x 51 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Exhaust over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
AWG 18, 20 UL 1007, TR 64,
- Internal temperature sensor
speed and alarm signals:
- PWM control input (standard)
AWG 22, UL 1007, TR 64
- Analog control input
Highlights:
Highly efficient and smoothly
- Multi-option control input
operating 3-phase fan drive
- Moisture protection
Housing with grounding lugfor
- Salt spray protection
screw M4 x 8 (Torx)
- Degree of protection: IP 54
Weight:
850 g
–
–
–
DC centrifugal fans
–
–
DC axial fans
– Material:
cfm
VDC
VDC
6314 N/2 TDHHP
970
571
24
16…36
-
8.3
135
7200
-20…+70
62,500 / 32,500
105,000
6318 N/2 TDH3P
1030
606
48
36…72
83
8.4
152
7500
-20…+70
60,000 / 30,000
102,500
Hours
Hours
¿
¡
AC centrifugal fans
AC axial fans
ACmaxx / EC fans
Speed control range from 1000 rpm-1 up to maximum nominal speed. Standstill at 0% PWM, maximum speed if control cable is interrupted.
* Power consumption at free air flow. These values can be significantly higher in the operating point.
Finger guards
from p. 242
Accessories
Ø 162+0,15
-0,3
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Ø 166
77
Representatives
Subject to change
dB(A) Bel(A)
2016-01
Type
DC fans - specials
m3/h
Nominal data
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption*
Nominal speed
Sintec sleeve bearings
Ball bearings
Sound power level
°C
Voltage range
rpm-1
Nominal voltage
Watts
Air flow
/
Air flow
Series 6300 NTD
Sound pressure level
1) Fiberglass-reinforced plastic
Max.
545 m /h
DC axial fans
3
Ø 172 x 51 mm
– Material:
–
–
–
–
–
Housing: Die-cast aluminum
Impeller: GRP1) (PA)
Direction of air flow: Exhaust over struts
Direction of rotation: Counterclockwise,
looking towards rotor
Connection:
Via single wires AWG 22,
TR 64
Highlights:
Housing with grounding lug for
screw M4 x 8 (Torx)
Weight:
825 g
– Possible special versions:
(See chapter DC fans - specials)
- Speed signal
- Go / NoGo alarm
- Alarm with speed limit
- External temperature sensor
- Internal temperature sensor
- PWM control input (standard)
- Analog control input
- Moisture protection
- Salt spray protection
- Degree of protection: IP 54
-20...+75
82 500 / 32 500
140 000
4 400
-20...+70
80 000 / 40 000
135 000
31
5 000
-20...+65
77 500 / 42 500
130 000
32
5 000
-20...+65
77 500 / 42 500
130 000
VDC
VDC
6314/2 MP
395
232
24
16...30
51
6.0
14
6314/2 NP
470
276
24
16...30
56
6.5
23
6314/2 HP
545
320
24
16...30
58
6.9
6318/2 HP
545
320
48
36...72
58
6.9
Subject to change
Speed control range from 700 rpm-1 up to maximum nominal speed. Standstill at 0% PWM,
maximum speed if control cable is interrupted.
* Power consumption at free air flow. These values can be significantly higher in the operating point.
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LwA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Finger guards
from p. 242
Tin-p
la
ted
7.6 d
eep
Curve
3 700
cfm
78
Life expectancy L10IPC
(40 °C) see page 17
Hours
m3/h
dB(A) Bel(A)
Service life L10 (Tmax)
ebm-papst standard
Hours
Type
Nominal data
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption*
°C
Voltage range
rpm-1
Nominal voltage
Nominal speed
Sintec sleeve bearings
Ball bearings
Watts
Air flow
Sound power level
/
Air flow
Series 6300
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
¬
¬
930 m /h
Information
Max.
DC axial fans
3
Ø 172 x 51 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Exhaust over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
Via single wires AWG 18, 20 or
- Internal temperature sensor
AWG 22, TR 64, speed signal
- PWM control input (standard)
and control input AWG 22
- Analog control input
Highlights:
Highly efficient and smoothly
- Multi-option control input
operating 3-phase fan drive
- Moisture protection
Housing with grounding lug for
- Salt spray protection
screw M4 x 8 (Torx)
- Degree of protection: IP 54
Weight:
910 g
–
–
–
DC centrifugal fans
–
–
DC axial fans
– Material:
Hours
7.3
40
5 500
-20...+70
75 000 / 37 500
127 500
60
7.3
42
5 500
-20...+65
75 000 / 42 500
127 500
16...36
60
7.3
40
5 500
-20...+75
75 000 / 30 000
127 500
16...36
69
7.9
67
7 000
-20...+75
62 500 / 25 000
105 000
16...36
75
8.4
150
9 200
-20...+75
52 500 / 20 000
87 500
Air flow
Nominal voltage
Voltage range
cfm
VDC
VDC
6312/2 TDHP
600
353
12
8...16
60
6314/2 TDHP-298
600
353
24
16...30
6314/2 TDHP
600
353
24
6314/2 TDHHP
710
418
24
6314/2 TDH4P
930
545
24
6318/2 TDHP-299
600
353
48
36...60
60
7.3
42
5 500
-20...+65
75 000 / 42 500
127 500
6318/2 TDHP
600
353
48
36...72
60
7.3
40
5 500
-20...+75
75 000 / 30 000
127 500
6318/2 TDHHP
710
418
48
36...72
69
7.9
67
7 000
-20...+75
62 500 / 25 000
105 000
6318/2 TDH4P
930
545
48
36...72
75
8.4
150
9 200
-20...+75
52 500 / 20 000
87 500
dB(A) Bel(A)
/
DC fans - specials
Hours
m3/h
¡
¿
¡
¬
ƒ
ACmaxx / EC fans
°C
Type
Nominal data
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Temperature range
Service life L10 (40 °C)
ebm-papst standard
Nominal speed
Power consumption*
Sintec sleeve bearings
Ball bearings
rpm-1
Sound power level
Watts
Air flow
Series 6300 TD
Sound pressure level
1) Fiberglass-reinforced plastic
¿
¡
¬
√
Subject to change
AC centrifugal fans
AC axial fans
Speed control range from 1000 rpm-1 up to maximum nominal speed.
Standstill at 0% PWM, maximum speed if control cable is interrupted.
* Power consumption at free air flow. These values can be significantly higher in the operating point.
6318/2 TDHHP
115
6318/2 TDH4P
270
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LwA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Finger guards
from p. 242
Tin-p
la
ted
7.6 d
eep
79
Representatives
optimum
operating range (W)
2016-01
Fan type
Accessories
* Power consumption – in operation
Max.
DC diagonal fan
1100 m /h
3
Ø 172 x 51 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Exhaust over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
(+) and GND: AWG 18, UL 1007,
- Internal temperature sensor
TR 64; speed and alarm signal:
- PWM control input (standard)
AWG 22, UL 1007, TR 64
- Analog control input
Highlights:
Highly efficient and smoothly
- Multi-option control input
operating 3-phase fan drive
- Moisture protection
Housing with grounding lugfor
- Salt spray protection
screw M4 x 8 (Torx)
- Degree of protection: IP 54
Weight:
1050 g
– Material:
–
–
–
–
–
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Temperature range
Service life L10 (40 °C)
ebm-papst standard
Nominal speed
Power consumption
Sintec sleeve bearings
Ball bearings
Sound power level
m3/h
cfm
VDC
VDC
DV 6318/2 TDHP*
630
371
48
36…72
68
7.6
75
4000
-20…+65
70 000 / 40 000
117 500
DV 6318/2 TDHHP*
770
453
48
36…72
73
8.0
135
4900
-20…+65
60 000 / 32 500
102 500
DV 6318/2 TDH4P
1050
617
48
36…72
77
8.7
300
6500
-20…+65
50 000 / 27 500
85 000
DV 6318/2 TDH5P**
1100
647
48
36…72
79
8.9
360
6800
-20…+65
40 000 / 22 500
67 500
Nominal data
dB(A) Bel(A)
/
Watts
Hours
Curve
Type
Air flow
Voltage range
°C
Nominal voltage
rpm-1
Air flow
Series DV 6300 TD
Sound pressure level
1) Fiberglass-reinforced plastic
Hours
¿
¡
¬
√
Subject to change
Speed control range from 1000 rpm-1 up to maximum nominal speed. Standstill at 0% PWM,
maximum speed if control cable is interrupted.
The fan has an acceleration of up to 30% that produces a smoother curve.
* On request
** Rotor protrusion
a = 3 mm




















n
rpm-1
Ped
W
LwA
dB(A)
L10 (40 °C)
L10 (65 °C)
L10IPC (40 °C)
4000
3835
3815
3930
4240
65,5
64,5
64,5
65
66
79
78
76
76
79
70 000
72 500
75 000
77 500
77 500
40 000
40 000
42 500
42 500
42 500
117 500
122 500
127 500
130 000
130 000
4900
4690
4670
4870
5190
120
119
119
120
121
83
82
80
81
85
60 000
67 500
72 500
75 000
75 000
32 500
37 500
40 000
42 500
42 500
102 500
115 000
122 500
127 500
127 500




















n
rpm-1
Ped
W
LwA
dB(A)
L10 (40 °C)
L10 (65 °C)
L10IPC (40 °C)
6500
6230
6200
6450
6900
280
275
280
281
283
90
89
88
88
92,5
50 000
62 500
70 000
72 500
72 500
27 500
35 000
40 000
40 000
40 000
85 000
105 000
117 500
122 500
122 500
6950
6720
6630
6850
7300
345
345
345
345
345
92
91
89,5
89
94
40 000
57 500
62 500
67 500
72 500
22 500
32 500
35 000
37 500
40 000
67 500
97 500
105 000
115 000
122 500
Tin-plated
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance
from fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
80
Finger guards
from p. 242
9.0 deep
Information
Max.
DC axial fans
1220 m /h
3
220 x 200 x 51 mm
– Possible special versions:
Housing: Die-cast aluminum
(See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
Direction of air flow: Exhaust over struts
- Go / NoGo alarm
Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
Connection:
Via single wires AWG 18, 20 or
- Internal temperature sensor
AWG 22, TR 64, speed signal
- PWM control input
and control input AWG 22
- Analog control input
Highlights:
Highly efficient and smoothly
- Multi-option control input
operating 3-phase fan drive
- Moisture protection
Housing with grounding lug
- Salt spray protection
for screw M4 x 8 (Torx)
- Degree of protection: IP 54
Weight:
1000 g
–
–
–
DC centrifugal fans
–
–
DC axial fans
– Material:
cfm
VDC
VDC
2214 F/2 TDHO
790
465
24
16...30
62
7.1
35
4250
-20...+75
90 000 / 42 500
152 500
2214 F/2 TDHHO
940
553
24
16...36
66
7.4
48
5000
-20...+70
85 000 / 42 500
142 500
2218 F/2 TDHO
790
465
48
36...57
62
7.1
35
4250
-20...+75
90 000 / 42 500
152 500
2218 F/2 TDHHO
940
553
48
36...72
66
7.4
48
5000
-20...+70
85 000 / 42 500
142 500
2218 F/2 TDH4P
1220
718
48
36...72
72
8.2
103
6500
-20...+65
70 000 / 40 000
117 500
dB(A) Bel(A)
Hours
Hours
DC fans - specials
m3/h
¿
¡
¿
¡
¬
ACmaxx / EC fans
Type
Subject to change
Finger guards
from p. 242
Tin-p
la
ted
7.6 d
eep
81
2016-01
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Accessories
AC centrifugal fans
AC axial fans
Speed control range from 1000 rpm-1 up to maximum nominal speed.
Standstill at 0% PWM, Type O: standstill if control wire is interrupted; Type P: maximum speed if control wire is interrupted.
* Power consumption at free air flow. These values can be significantly higher in the operating point.
Representatives
Nominal data
Curve
Life expectancy L10IPC
(40 °C) see page 17
Service life L10 (Tmax)
ebm-papst standard
Service life L10 (40 °C)
ebm-papst standard
Temperature range
Power consumption*
Nominal speed
Sintec sleeve bearings
Ball bearings
Sound power level
°C
Voltage range
rpm-1
Nominal voltage
Watts
Air flow
/
Air flow
Series 2200 FTD
Sound pressure level
1) Fiberglass-reinforced plastic
Max.
1245 m /h
DC diagonal module
3
 225 x 80 mm
– Material:
Housing and support bracket: Fiberglass-reinforced plastic (PA6)
Impeller: Fiberglass-reinforced plastic (PA6)
Rotor: Painted black
Number of blades:
7
Direction of air flow:
"V"
Direction of rotation:
Clockwise, looking towards rotor
A C IP 44, B D IP 20, depending on installation and position
Degree of protection:
Insulation class:
"B"
Installation position:
Any
Condensation drainage holes: A C none, B D seen on rotor
Mode of operation:
Continuous operation (S1)
Bearings:
Maintenance-free ball bearings
Power consumption
Input current
Sound power level
Admissible amb. temp.
Weight
VDC
m3/h
rpm-1
W
A
dB(A)
°C
kg
A
24
16...28
1020
3 400
95
4.7
76
-25...+60
1.8
p. 262 / J5)
M1G 074-BF
B
24
16...28
1045
3 500
110
5.4
77
-25...+70
1.7
p. 262 / J5)
K1G 200-AD49-04
M1G 074-BF
C
48
36...57
1095
3 650
120
3.4
77
-25...+60
1.8
p. 262 / J5)
K1G 200-AD37-02
M1G 074-BF
D
48
36...57
1245
4 140
183
5.6
81
-25...+70
1.7
p. 262 / J5)
Nominal voltage
Curve
Type
Motor
K1G 200-AD65-04
M1G 074-BF
K1G 200-AD31-02
Technical features and
connection diagram
Nominal speed
VDC
Nominal data
Nominal voltage range
Air flow
–
–
–
–
–
–
–
–
–
n
rpm-1
in wg
Curves:
Pa
Subject to change
1
3400
95
4.70
76
2
3410
116
5.61
74
A
3
3410
119
5.75
74
A
4
3410
117
5.62
76
B
B
1
3500
110
5.40
77
A
B
2
3510
127
6.24
75
B
3
3510
129
6.31
75
B
4
3510
125
6.15
76
C
1
3650
120
3.40
77
C
2
3645
141
3.90
75
C
3
3640
145
3.99
76
C
4
3645
141
3.88
80
D
1
4140
183
5.60
81
D
2
4080
212
6.46
79
D
3
4060
213
6.52
79
D
4
4105
211
6.43
80
2
1.5
C
1
300
0.5
200
100
Pfs
0
qv
100
200
200
300
400
400
600
500
800
600
1000
700
1200
cfm
m³/h
Air performance measured according to: ISO 5801. Installation category A, without contact protection. Suction-side noise levels:
LWA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are applicable only under the specified
measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard configuration, the parameters must be checked after installation! For detailed information see http://www.ebmpapst.com/general conditions
2016-01
L WA
dB(A)
A
400
82
I
A
A
D
500
Ped
W
Information
DC centrifugal fans
DC fans - specials
ACmaxx / EC fans
Ø276 ±0.5
225
Ø4.6 (4x)
80 ±1
AC axial fans
Ø288
6
4x90°
AC centrifugal fans
45°
0+
20
.5
67
Ø2
35
0
±1
Accessories
85
6
"V"
Cable assignment:
Red
= UN
Yellow = 0-10 VDC
White = tach output
Blue = GND
Connection diagrams
P. 262
83
Representatives
AWG 20 cable,
4x crimped splices
2016-01
–
–
–
–
See connection diagram p. 262
Immunity to interference according to EN 61000-6-2 (industrial environment)
Interference emission according to EN 55022 (Class B)
Cable exit:
Lateral
Protection class:
I (with customer connection to grounding conductor)
Conformity with standard(s): EN 60335-1
A C UL 1004-1, CSA C22.2 no. 77
Approvals
B D EAC, UL 1004-1, CSA C22.2 no. 77
DC axial fans
– Technical features:
– EMC:
Max.
1650 m /h
DC diagonal module
3
 225 x 89 mm
– Material:
Power consumption
Input current
Sound power level
Admissible amb. temp.
Weight
VDC
m3/h
rpm-1
W
A
dB(A)
°C
kg
A
24
16...28
1240
4120
170
7.0
80
-25...+60
2.3
p. 262 / J5)
M3G 074-CF
B
24
16...28
1445
4830
275
11.5
84
-25...+60
2.3
p. 262 / J5)
K3G 200-BD64-04
M3G 074-CF
C
48
36...57
1475
4875
275
5.8
85
-25...+60
2.3
p. 262 / J5)
K3G 200-BDA8-02
M3G 074-CF
D
48
36...57
1650
5470
400
8.4
88
-25...+60
2.3
p. 262 / J5)
Nominal voltage
Curve
Type
Motor
K3G 200-BD46-04
M3G 074-CF
K3G 200-BD44-02
Technical features and
connection diagram
Nominal speed
VDC
Nominal data
Nominal voltage range
Air flow
–
–
–
–
–
–
–
–
–
Housing and support bracket: Plastic (PA)
Impeller: Plastic (PA)
Rotor: Painted black
Number of blades:
7
Direction of air flow:
"V"
Direction of rotation:
Clockwise, looking towards rotor
A C IP 44, B D IP 20, depending on installation and position
Degree of protection:
Insulation class:
"B"
Installation position:
Any
Condensation drainage holes: A C none, B D seen on rotor
Mode of operation:
Continuous operation (S1)
Bearings:
Maintenance-free ball bearings
Pa
Curves:
in wg
Subject to change
n
rpm-1
Ped
W
I
A
L WA
dB(A)
D
3
800
B
C
600
2
A
1
4120
170
7.00*
80
A
2
4025
180
7.52*
77
A
3
4005
187
7.80*
76
A
4
4045
187
7.78*
78
B
1
4830
275
11.50*
84
B
2
4720
294
12.24*
81
B
3
4685
299
12.48*
80
B
4
4715
295
12.30*
83
C
1
4875
275
5.80*
85
C
2
4795
300
6.27*
81
C
3
4755
307
6.41*
80
C
4
4780
304
6.35*
82
D
1
5470
400
8.40*
88
D
2
5365
426
8.89*
85
D
3
5310
438
9.17*
83
D
4
5355
431
9.01*
87
1
400
A
200
* Current measured at nominal voltage.
Pfs
0
qv
200
400
400
600
800
800
1200
1000 cfm
1600 m³/h
2016-01
Air performance measured according to: ISO 5801. Installation category A, without contact protection. Suction-side noise levels:
LWA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are applicable only under the specified
measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard configuration, the parameters must be checked after installation! For detailed information see http://www.ebmpapst.com/general conditions
84
Information
See connection diagram p. 262
Immunity to interference according to EN 61000-6-2 (industrial environment)
Interference emission according to EN 55022 (Class B, household environment)
– Cable exit:
Lateral
– Conformity with standard(s): EN 60335-1
– Approvals:
(24 V) EAC
(48 V) EAC, CCC
ACmaxx / EC fans
DC fans - specials
DC centrifugal fans
DC axial fans
– Technical features:
– EMC (48 V):
225 ±0.5
Ø4.6 ±0.2 (4x)
219 ±0.5
83 ±1
Ø2
76 ±
AC axial fans
6
45°
45°
0.5
Mounting dimensions
Ø 27
AC centrifugal fans
6 ±0.5
Ø2
69
±0
"V"
Accessories
500 +20
85 ±10
8
.5
Cable assignment:
Red
= UN
Yellow = 0-10 VDC
White = tach output
Blue
= GND
85
Representatives
Connection diagrams
P. 262
2016-01
PVC AWG 16 cable
4x crimped ferrules
Max.
2070 m /h
DC axial fans
3
Ø 250 mm
– Material:
Power consumption
Input current
Max. back-pressure
Admissible amb. temp.
Motor
VDC
m3/h
rpm-1
W
A
Pa
°C
W1G250-HJ87 -02
M1G 074-BF
A
24
16-28
2070
3090
120 7.00
150
-25...+60
p. 258 / E)
W1G250-HJ63 -02
M1G 074-BF
B
48
36-57
2070
3090
120 3.40
150
-25...+60
p. 258 / E)
Nominal voltage
Technical features and
connection diagram
Nominal speed
Type
Nominal voltage range
VDC
Curve
Nominal data
Number of blades:
Direction of air flow:
Direction of rotation:
Insulation class:
Installation position: Any
Condensation drainage holes: On rotor side
Mode of operation:
Continuous operation (S1)
Bearings:
Maintenance-free ball bearings
Air flow
–
–
–
–
–
–
–
–
Fan housing: Die-cast aluminum
Blades: Plastic (PP)
Rotor: Thick-film passivated
7
"V"
Counterclockwise, looking towards rotor
"B"
Pa
Curves:
in H2O
Subject to change
160
0,6
A
0,5
0,4
0,3
0,2
2
0,1
40
pfs
20
0
200
400
400
600
800
800
1200
1000
1600
1
1200 cfm
2000
m3/h
2016-01
Air performance measured according to: ISO 5801. Installation category A, without contact protection. Suction-side noise levels:
LWA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are applicable only under the specified
measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard configuration, the parameters must be checked after installation! For detailed information see http://www.ebmpapst.com/general conditions
86
L WA
dB(A)
A
1
3090
120
6.80
74
A
2
2950
124
7.10
73
A
3
2820
127
7.43
73
A
4
2730
130
7.80
78
B
1
3090
120
3.40
74
B
2
2950
124
3.55
73
B
3
2820
127
3.74
73
B
4
2730
130
3.90
78
3
60
qV
I
A
4
120
80
Ped
W
B
140
100
n
rpm-1
Information
See connection diagram p. 258
Interference emission acc. to EN 55022 (Class B)
Immunity to interference acc. to EN 61000-6-2 (industrial environment)
– Electrical hookup:
Via terminal strip
– Protection class:
I
– Conformity with standard(s): EN 60950-1
ACmaxx / EC fans
DC fans - specials
DC centrifugal fans
DC axial fans
– Technical features:
– EMC:
Accessories
AC centrifugal fans
AC axial fans
For self-tapping
M6 screws
Connection diagrams
P. 258
(1) Control input
(2) Speed monitoring
87
Representatives
Finger guards
from p. 245
"V"
2016-01
For self-tapping
M5 screws
Max.
DC axial fans – HyBlade®
2345 m /h
3
Ø 300 mm
– Material:
Power consumption
Input current
Max. back-pressure
Admissible amb. temp.
Motor
VDC
m3/h
rpm-1
W
A
Pa
°C
*1G 300
M1G 074-CF
A
24
16-28
2320
1830
80 3.80
100
-25..+60
p. 262 / J5)
*1G 300
M1G 074-CF
B
48
36-57
2345
1830
80 1.90
100
-25..+60
p. 262 / J5)
Technical features and
connection diagram
Nominal speed
Type
Nominal voltage range
Nominal data
Nominal voltage
VDC
Curve
Air flow
–
–
–
–
–
–
–
–
–
Finger guard: Steel, phosphated and coated in black plastic
Fan housing: Sheet steel, pre-galvanized and coated in black plastic
Blades: Plastic (PP)
Rotor: Painted black
Number of blades:
5
Direction of air flow:
"V"
Direction of rotation:
Counterclockwise, looking towards rotor
Degree of protection:
IP 42
Insulation class:
"B"
Installation position:
Any
Condensation drainage holes: None
Mode of operation:
Continuous operation (S1)
Bearings:
Maintenance-free ball bearings
Pa
Curves:
in H2O
Subject to change
n
rpm-1
Ped
W
I
A
L WA
dB(A)
100
0,4
110
A
90
B
4 4
A
1
1810
80
3.80
67
A
2
1730
86
4.03
67
A
3
1690
87
4.10
66
A
4
1635
89
4.21
70
B
1
1870
87
2.00
68
B
2
1805
90
2.10
67
B
3
1765
91
2.13
67
B
4
1695
92
2.19
69
0,3
80
3
70
60
0,2
50
3
2
40
30
0,1
2
20
pfs
10
0
qV
200
200
400
400
600
600
800
800
1000
1200
1000 1200 1400 1600 1800 2000 2200
1
cfm
m3/h
2016-01
Air performance measured according to: ISO 5801, installation category A, in ebm-papst full nozzle without contact protection. Suction-side
noise levels: LWA according to ISO 13347, LpA measured at 1 m distance from fan axis. The values given are applicable only under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard configuration, the parameters must be checked after installation! For detailed information see http://www.ebmpapst.com/general conditions
88
Information
With finger guard
for short nozzle
kg
"V"
A1G 300-AC19 -54
1.8
W1G 300-DC19 -54
3.8
S1G 300-AC19 -54
2.8
"V"
A1G 300-AC33 -54
1.8
W1G 300-DC33 -54
3.8
S1G 300-AC33 -54
3.1
DC axial fans
AC axial fans
45°
Ø300 ±1
31
AC centrifugal fans
Ø58±0.15
85±10
6
450 +20
Ø92
"V"
Ø380
15°
Ø9 (6x)
57.5 ±3 M4 (4x)
90°
75
80
11
DC centrifugal fans
Max. clearance for screw 6 mm
A1G 300
79±5
ACmaxx / EC fans
"V"
kg
DC fans - specials
Weight with finger
guard for short nozzle
"V"
With full round
nozzle
PVC AWG 20 cable,
4x crimped splices
25±3
(6
60
°
W1G 300
Connection diagrams
P. 262
Accessories
4.3
29±5
S1G 300
89
2016-01
Ø326
Ø397
Ø300 ±1
Ø329.6
Ø360
x)
4.5
57.2
Representatives
kg
Weight with full
round nozzle
"V"
without
attachments
Weight without
attachments
See connection diagram p. 262
Interference emission acc. to EN 55022 (Class B)
Immunity to interference acc. to EN 61000-6-2 (industrial environment)
– Cable exit:
Lateral
– Conformity with standard(s): EN 60950-1, UL 1004-1, CSA C22.2 no. 100
– Approvals:
GOST, UL
Airflow direction
– Technical features:
– EMC:
2016-01
90