DC-AC INVERTER UNIT PS-M04D05S3-NJ1L-013(S) (6,5 W DUAL OUTPUTS) (PRELIMINARY INFORMATION) DESCRIPTION : This low profile DC/AC Inverter is developed for dual lamps. Optimized for Kyocera: KCG075VG2A APPLICABLE LCD: 6.4 to 12 inches type double lamps Lamp Voltage 450 Vrms Lamp Current 4.0 mArms FEATURES : Remote ON/OFF Ext. PWM-dimming function RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity LxWxH 123 x 23 x 10mm 122,5 ± 0.5 30,5 ± 0.5 82 ± 0.3 (2) CN2 1 PS-M06D05-NJ1L 29/01/2004 MADE IN GERMANY CN1 15 ± 0.3 22,5 ± 0.5 5 ± 0.5 DIMENSIONS : 0°C ~ +60°C -20°C ~ +85°C 95 %RH max CAUTION HIGH VOLTAGE CN3 1 1 10.0MAX 3 2 - Ø2.5 ± 0.2 2 1 Unit : mm Weight :20 (g) typ. High Voltage generation area 60mm Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 Part Description PCB Connector CN1 Connector CN2 + CN3 Input side CN1: Pin No. Symbols Vin CN 1-1 GND CN 1-2 CN 1-3 Ext. PWM N.C. CN 1-4 CN 1-5 Vrm t Qty. 1 1 2 Material UL94V-0 (FR-4 or CEM-3) S5B-PH-SM3 SM02(8.0)B-BHS-1-TB Output side CN2: Pin No. Symbols Vhigh CN 2-1 Vlow CN 2-2 Ratings 5 Vdc Ratings 440 Vrm s (4.5 m Arm s ) 0 Vdc 0 ~ 5 Vdc (L activ) Output side CN3: Pin No. Symbols Vhigh CN 3-1 Vlow CN 3-2 0 / 5 Vdc (H activ) Power Systems – The Power Solution Web: Email: Note t=1.6m m JST or equal JST or equal www.Power-Systems.de [email protected] All specifications are subject to change without notice. Ratings 440 Vrm s (4.5 m Arm s ) 0 Vdc Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 2.9.1, 20th May 2014 DC-AC INVERTER UNIT PS-M04D05S3-NJ1L-013(S) (6,5 W DUAL OUTPUTS) (PRELIMINARY INFORMATION) ELECTRICAL CHARACTERISTICS : Parameters Symbols Output Current Output Current Input Current Frequency Open Circuit Voltage Iout Iout Iin F Vopen Note 1 : Conditions Vrmt Vin (V) Tu (°C) (V) 5±0.05 5±0.25 0 ~ +60 5±0.5 5±0.25 0 ~ +60 5±0.5 5±0.25 0 ~ +60 5±0.5 5±0.25 0 ~ +60 4.75 5±0.25 0 ~ +60 Specification Min. Typ. Max. 3.9 3.5 50 1.100 4.5 4.5 1.6 60 1.150 5.1 5.5 2.5 70 - Unit Note m Arm s m Arm s Adc kHz Vrm s Duty 100% Please keep a minimum of 2mm clearance in all directions between inverter high voltage areas and any conductors as marked on mechanical drawing. Remote ON/OFF (CN1-5) has priority and can not be used in combination with External PWM Dimming (CN1-3). When “Ext. PWM” (CN1-3) is used, “Vrmt” (CN1-5) should not be connected. Note 2: TEST CIRCUIT : Vin 5V A F Iin 1000:1 PROBE F CN1-1 Vopen V ~ SW 1 SW3 V Operation of unit a Operation b Non operation CN2-1 CN1-2 CN1-3 Ext. PWM* 0~5V NC CL1 RL1 A ~ T1 CN2-2 SW4 Iout1 SW5 CN1-4 CN3-1 Vrmt 2.5 Vdc ~ Vin V b CL2 RL2 a SW1 CN1-5 CN3-2 SW6 A ~ Iout2 *) Only active when Vrmt is 0 Vdc or floating External PWM-Dimming / Remote ON / OFF Detailed Circuit Diagram : Note 3 : If the customer chooses to use the external PWM dimming function (High-Active), then the remote on/off needs to be deactivated by connecting it to the GND. Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 2.9.1, 20th May 2014