Download

P

Ideas for Wireless Solutions
Bluetooth Low Energy embedded
Single Mode Module PAN1760
OUTLINES
M
ODULES
Panasonic
Industrial Devices Europe GmbH
IRELESS
W
PAN1760 is based on Toshiba´s single chip TC35667 Bluetooth
semiconductor device with embedded Toshiba Bluetooth
SIG certified stack. The TC35667 is a highly integrated and
compact Bluetooth controller that delivers high-speed
operation at ultra-low power consumption. It significantly
reduces external component count and power consumption
in applications requiring Bluetooth Low Energy support.
PAN1760 and PAN1026 share the same form factor and module
footprint. Bluetooth LE applications and profiles developed
using PAN1026 can almost 1:1 be transferred to PAN1760.
Only small changes for higher feature set of PAN1760 are needed.
Central and Peripheral Mode are supported.
FCC, IC and CE approval are available.
The integrated EEPROM can be used for applications, up to 32KB
are availabe for stand alone operation, no host MCU is needed.
FEATURES
General
- Same form factor and footprint as PAN1026
- Bluetooth 4.0 (LE) embedded GATT profile with high level API
commands, compatible to Toshiba reference BLE profiles
- Power consumption Max 8.7mA Tx/ Max 8.4 Rx/<5µA Sleep
- Tx power 0 dBm, Rx sensitivity -91 dBm
- Small 15.6 x 8.7 x 1.9 mm³ SMD package
- Compliant to BT 4.0 (extension to 4.1 under development)
- 32kB on-chip RAM for applications
- 512kBit eeprom to download user program during start up
- Operation as host-less, stand alone
- Standard SIG BLE and “SPP over BLE” profiles available
- Temperature Range from -40°C to +85°C
Interfaces
- UART, I2C , GPIO (10 in/out), Wake-Up control pins, ADC(4 CH)
Bluetooth 4.0
- GAP central and peripheral support for LE
- GATT, SMP and SDB support for LE
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt
regarding the safety of this product, kindly inform us immediately for technical consultation.
PAN1760
Rev. 0.2
regarding the safety of this product, kindly inform us immediately for technical consultation.
PAN1760 BT4.1
Rev. 0.1
Hardware Status:
Pre-Production
P
APPLICATIONS
- Wearable Devices
- Consumer Electronics
- Health Care, Medical Diagnostic Systems - Remote Controls
- Health Care and Medical
- Sports and Leisure Equipment
- Heart Rate Monitor
- Mobile phone accessories
- Blood Glucose Meter
- Industrial Measurement and Diagnosis
- Devices where Power Consumption is critical
BLOCK DIAGRAM
EEPROM
I2C
VCC/VSS
UART
GPIO
Slow Clock 32.768 kHz
Wake Up Input
Wake Up Output
Antenna
Toshiba
Single Mode Bluetooth
LSI
TC35667
Crystal
26 MHz
Filter
PAN1760
TECHNICAL CHARACTERISTICS
Parameter
0,1% BER
Receiver Sensitivity (1% PER)
Output Power
Power Supply
Transmit and Receive Mode
Low Power Mode
Operating Temperature Range
Value
- 91 dBm
0 dBm
1.8V - 3.6V
5.4 mA
<1 µA
-40C / +85C
Condition / Note
@ 500 kpbs / MSK (high-gain mode)
Maximum setting
Single operation voltage
typical
Industrial Range
Hardware Status:
Engineering Samples