Test Probes 4 mm Safety System PRUEF 2700 PRUEF 2600 Safety test probe with dual function. Tip for penetrating insulation and oxide layers and 4 mm diameter pin for insertion in sockets. 4 mm diameter brass socket connection. Connects with safety measuring leads. Test probe with elastic, shatter-proof insulated sleeve and slender stainless steel tip. Tip for penetration of insulation and oxide layers. 4 mm diameter brass socket connection. Connects with safety measuring leads. Accessory tip protector and IC tap SS 260. Tip diameter 4 mm (0.157 in.) 2 mm (0.78 in.) PART NO. / Housing color 972319100 972319101 972317100 972317101 stationary tip stationary tip fixed socket Ø 4 mm AC/DC 1000 V CAT II 32 A 2 mOhm fixed socket Ø 4 mm AC/DC 1000 V CAT III 1A 50 mOhm nickel plated brass nickel plated brass – PP stainless steel nickel plated brass – PP -25 °C to +80 °C (13°F to 176°F) -25 °C to +80 °C (13°F to 176°F) UL 94 HB UL 94 HB Type Technical Data Connection Type Voltage Rating Measurement Category (IEC61010) Current Rating* Contact Resistance Material Specifications Tip Connection pin/ socket Contact Spring Housing Environmental Conditions Temperature range Flamability Rating Housing 21 19 Drawing Measurements are shown in millimeters. Multiply by 0.03937 to convert to inches. 20 Handle 19 130 4 37 94 ø4 ø 13 ø 4,3 ø2 ø4 90 19 ø 11 ø4 Handle * Please consider derating graph on page 80. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 17