Test Probes 4 mm System MZS 1 - PRUEF PRUEF 2 Needle-shaped, long stainless steel test probe with shatter-proof insulated sleeve and unsprung 4 mm connecting socket. During state of connection or operation of test leads, it is possible to measure with the test probe from the back side of the closed connector. Test probe with shatter-proof insulated sleeve. Insulation and oxide layers can be penetrated by the slender stainless steel tip. 4 mm diameter brass socket connection. Accessory (optional): tip protector / IC tap SS 260 Tip diameter 1 mm (0.039 in.) 2 mm (0.079 in.) PART NO. / Housing color 973601100 973601101 973368100 973368101 stationary tip stationary tip fixed socket Ø 4 mm 30 VAC / 60 VDC CAT I 1A 10 mOhm fixed socket Ø 4 mm 30 VAC / 60 VDC CAT I 1A 50 mOhm stainless steel nickel plated brass – PP stainless steel nickel plated brass – PP -20°C to + 60°C (-4°F to 140°F) -25 °C to +80 °C (13°F to 176°F) UL 94 HB UL 94 HB Type Technical Data Connection Type Voltage Rating Measurement Category (IEC61010) Current Rating* Contact Resistance Material Specifications Tip Connection pin/ socket Contact Spring Housing Environmental Conditions Temperature range Flamability Rating Housing Drawing Measurements are shown in millimeters. Multiply by 0.03937 to convert to inches. 68 7,5 61,5 ø 4,3 22 ø4 ø8 ø1 ø2 ø 12 34 97,5 * Please consider derating graph on page 80. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 15