Test Probes 2 mm System Type Tip diameter MPS 1 PRUEF 1610 FT Au PRUEF 1600 Au Miniature test probe for sampling very small measuring points. The stainless steel tip easily penetrates insulation and oxide layers. Socket connection through a 2 mm diameter gold-plated socket with contact spring. Safety test probe with shatter-proof insulated sleeve, spring-loaded and slender stainless steel tip. 2 mm diameter gold-plated brass socket connection, stackable with 2 mm safety measuring lead MVL S WS. Insulation and oxide layers can be penetrated by this test probe. Safety test probe with shatter-proof insulated sleeve and slender stainless steel tip. 2 mm diameter gold-plated brass socket connection, stackable with 2 mm safety measuring lead MVL S WS. Insulation and oxide layers can be penetrated by this test probe. 1 mm (0.039 in.) 0.75 mm (0.029 in.) 1.4 mm (0.055 in.) 975018700 975018701 975017700 975017701 973531100 973531101 PART NO. / Housing color Technical Data Connection Type stationary tip spring-loaded socket Ø 2 mm Measurement Category (IEC61010) 30 VAC / 60 VDC CAT I Current Rating* 1A Contact Resistance 100 mOhm Material Specifications spring-loaded tip fixed socket Ø 2mm AC/DC 1000V CAT II 10 A 20 mOhm stationary tip fixed socket Ø 2 mm AC/DC 1000V CAT III 10 A 20 mOhm Tip Connection pin/ socket Contact Spring Housing stainless steel gold plated copper-beryllium – stainless steel gold plated copper-beryllium – stainless steel gold plated brass – PE PA PA -25 °C to +60 °C (13°F to 140°F) -25°C to +70°C (13°F to 158°F) -25°C to +70°C (13°F to 158°F) – UL 94 V-2 UL 94 V-2 Voltage Rating Environmental Conditions Temperature range Flamability Rating Housing ø1 Drawing Measurements are shown in millimeters. Multiply by 0.03937 to convert to inches. ° 7 45 7 ø 16 Handle 84 ø5 ø 1,4 ø 12 ø 12 Handle ø5 ø 0,75 32 86 ø 7,5 3,5 ø 10 ø2 ø 16 79 * Please consider derating graph on page 80. 14 For the latest on Altech Test & Measurement specifications please visit www.altechcorp.com/test-equipment