5159

SENSITRON
SEMICONDUCTOR
SHD224805
TECHNICAL DATA
DATA SHEET 5159, REV. -
HERMETIC POWER MOSFET
N-CHANNEL
FEATURES:
• 600 Volt, 60A, 55 milli-Ohm
• Isolated Hermetic Metal Package
• Very low Gate Charge
• Very Low RDS (on)
• Low package inductance-easy to drive and protect
MAXIMUM RATINGS
ALL RATINGS ARE AT T = 25°C UNLESS OTHERWISE SPECIFIED.
RATING
GATE TO SOURCE VOLTAGE
ON-STATE DRAIN CURRENT @ TC = 25°C
PULSED DRAIN CURRENT @ TC = 25°C
OPERATING AND STORAGE TEMPERATURE
THERMAL RESISTANCE, JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25°C
C
SYMBOL
VGS
ID (on)
IDM
TOP/TSTG
RthJC
PD
MIN.
-55
-
TYP.
-
MAX.
±20
60
220
+150
0.36
350
UNITS
Volts
Amps
Amps
°C
°C/W
Watts
SYMBOL
BVDSS
MIN.
600
TYP.
-
MAX.
-
UNITS
Volts
-
-
2.0
-
-
0.055
4.0
Ω
Volts
20
500
100
-100
-
μA
μA
nA
ELECTRICAL CHARACTERISTICS
RATING
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 250 μA
STATIC DRAIN TO SOURCE ON STATE RESISTANCE
VGS = 10V, ID = 44A
GATE THRESHOLD VOLTAGE
VDS = VGS, ID = 3mA
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = 600V, VGS = 0V
VDS = 0.8xMax. Rating, VGS = 0V, TJ = 125°C
GATE TO SOURCE LEAKAGE FORWARD
VGS = 20V
GATE TO SOURCE LEAKAGE REVERSE
VGS = -20V
TURN ON DELAY TIME
VDS = 400V,
RISE TIME
ID = 44A,
TURN OFF DELAY TIME
RG = 3.3Ω,
FALL TIME
VGS = 10V
DIODE FORWARD VOLTAGE
IS = 44A,
VGS = 0V
REVERSE RECOVERY TIME
IF = 44A, -di/dt = 100A/μsec, VR = 100V
INPUT CAPACITANCE
VGS = 0 V
OUTPUT CAPACITANCE
VDS = 100 V
f = 1 MHz
GATE CHARGE
IF = 44A, VDS = 400 V, VGS = 10V, RG = 3.3Ω
RDS(ON)
VGS(th)
IDSS
IGSS
-
td(ON)
tr
td(OFF)
tf
VSD
-
trr
Ciss
Coss
-
Qgs
Qgd
Qg
-
-
40
30
130
20
-
nsec
1.35
Volts
600
6800
320
-
nsec
34
51
150
190
pF
nC
© 2010 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 •
• FAX (631) 242-9798 • www.sensitron.com • [email protected] •
SHD224805
SENSITRON
TECHNICAL DATA
DATA SHEET 5159, Rev. -
MECHANICAL DIMENSIONS: in Inches / mm
.165 (4.19
Dia.
.155 3.94)
.270 (6.86
.240 6.10)
.695 (17.65
.685 17.40)
.045 (1.14
.035 0.89)
.835 (21.21
.815 20.70)
.707 (17.96
.697 17.70)
1.302 (33.07
1.202 30.53)
1
2
.065 (1.65
.055 1.40)
3 Places
.550 (13.97
.530 13.46)
3
.200(5.08) BSC
2 Places
.140(3.56) BSC
TO-258
PINOUT TABLE
DEVICE TYPE
MOSFET IN A
TO-258 PACKAGE
PIN 1
DRAIN
PIN 2
SOURCE
PIN 3
GATE
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
© 2010 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 •
• FAX (631) 242-9798 • www.sensitron.com • [email protected]