Model 7519A TwistGuard™ Test Lead Set with Adjustable Probe Tip Lengths Features Patented adjustable probe tip shroud for use in CAT II, CAT III and CAT IV measurements environments, meeting the latest in electrical safety requirements TwistGuard™ feature for changing between 19mm to 4mm (0.75in to 0.16in) probe tip lengths; reducing tip exposure for increased safety Probes always show correct category rating for the tip exposure being used Compatible with all instruments that accept standard 4mm shrouded banana plugs New WearGuard™ test lead wire is covered by two layers of silicone insulation, which acts as a wear indicator exposing an inner contrasting color when the leads are nicked, scuffed, or otherwise damaged and in need of replacement Extra-heavy strain relief on both the probe-end and banana plug-end, tested beyond 30,000 bends without failure Rubber-overmold on the probe and plug provides the user a comfortable hold and steady grip for making accurate measurements Conforms to EN61010-031 Materials Insulation – Polypropylene HB Tip – Brass, Nickel Plated Wire: 18 AWG, 192 x 41 bare copper, Silicone Dual Extruded O.D. 0.144” (3,66mm), Length: 48” (122cm) Banana Plug: Body – Brass, Nickel Plated Spring – Beryllium Copper, Nickel Plated Insulation – Polypropylene HB Overmold: TPE, Sarlink Probe Body: Ratings Voltage: CAT III 1000V / CAT IV 600V (when probe tip shroud is fully extended) CAT II 1000V (when probe tip shroud is retracted) Current: 10 amp max. Temperature: -20°C to +55°C (-4°F to +131°F) Ordering Information Model: 7519A TWISTGUARD™ TEST LEADS, 2MM DIA PROBE TIPS USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2016 D2092211 Rev. 003 Page 1 of 2 Model 7519A TwistGuard™ Test Lead Set with Adjustable Probe Tip Lengths Probes always show the correct category rating for the tip exposure being used Universal plugs compatible with all 4mm shrouded inputs Reduced tip exposure for accurate placement Extreme strain relief tested to withstand over 30,000 bends WearGuard™ indicator shows insulation damage Increased tip exposure for CAT II probing USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2016 D2092211 Rev. 003 Page 2 of 2