HS2A - HS2M Taiwan Semiconductor CREAT BY ART 2A, 50V - 1000V High Efficient Surface Mount Rectifiers FEATURES - Low power loss, high efficiency - Ideal for automated placement - Glass passivated junction chip. - Fast switching for high efficiency - Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 definition MECHANICAL DATA DO-214AA (SMB) Case: DO-214AA (SMB) Molding compound, UL flammability classification rating 94V-0 Moisture sensitivity level: level 1, per J-STD-020 Part No. with suffix "H" means AEC-Q101 qualified Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per JESD22-B102 Meet JESD 201 class 2 whisker test Polarity: Indicated by cathode band Weight: 0.093 g (approximately) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) PARAMETER SYMBOL HS HS HS HS HS HS HS HS 2A 2B 2D 2F 2G 2J 2K 2M UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 300 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 210 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 300 400 600 800 1000 V Maximum average forward rectified current IF(AV) 2 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 50 A Maximum instantaneous forward voltage (Note 1) IF= 2 A Maximum reverse current @ rated VR TJ=25°C TJ=125°C VF 1.0 1.3 1.7 5 IR V μA 150 Maximum reverse recovery time (Note 2) trr 50 75 ns Typical junction capacitance (Note 3) CJ 50 30 pF Typical thermal resistance Operating junction temperature range Storage temperature range RθJA 80 °C/W TJ - 55 to +150 °C TSTG - 55 to +150 °C Note 1: Pulse test with PW=300μs, 1% duty cycle Note 2: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Note 3: Measured at 1 MHz and Applied VR=4.0 Volts Document Number: DS_D1410043 Version: J15 HS2A - HS2M Taiwan Semiconductor ORDERING INFORMATION PART NO. PART NO. PACKING PACKING CODE SUFFIX CODE R5 SUFFIX R4 G HS2x (Note 1) H M4 PACKAGE PACKING SMB 850 / 7" Plastic reel SMB 3,000 / 13" Paper reel SMB 3,000 / 13" Plastic reel Note 1: "x" defines voltage from 50V (HS2A) to 1000V (HS2M) EXAMPLE PREFERRED P/N PART NO. HS2MHR5G HS2M PART NO. PACKING CODE PACKING CODE SUFFIX H DESCRIPTION SUFFIX R5 AEC-Q101 qualified Green compound G RATINGS AND CHARACTERISTICS CURVES (TA=25°C unless otherwise noted) FIG. 2- TYPICAL REVERSE CHARACTERISTICS FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT (A) 3 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 INSTANTANEOUS REVERSE CURRENT (μA) 1000 TJ=100°C 100 10 TJ=25°C 1 0.1 0 LEAD TEMPERATURE (°C) 30 20 10 0 NUMBER OF CYCLES AT 60 Hz Document Number: DS_D1410043 100 INSTANTANEOUS FORWARD CURRENT (A) PEAK FORWARD SURGE URRENT(A) 40 10 80 100 120 140 10 8.3ms Single Half Sine Wave 1 60 FIG. 5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 60 50 40 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG. 3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 70 20 HS2A-HS2D 1 HS2G HS2J-HS2M 0.1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) Version: J15 HS2A - HS2M Taiwan Semiconductor FIG. 4- TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE (pF) 175 150 f=1.0MHz Vsig=50mVp-p 125 100 HS2A-HS2G 75 50 25 HS2J-HS2M 0 0.1 1 10 100 1000 REVERSE VOLTAGE (V) PACKAGE OUTLINE DIMENSIONS DO-214AA (SMB) Unit (mm) DIM. Unit (inch) Min Max Min Max A 1.95 2.10 0.077 0.083 B 4.25 4.75 0.167 0.187 C 3.48 3.73 0.137 0.147 D 1.99 2.61 0.078 0.103 E 0.90 1.41 0.035 0.056 F 5.10 5.30 0.201 0.209 G 0.10 0.20 0.004 0.008 H 0.15 0.31 0.006 0.012 SUGGESTED PAD LAYOUT Symbol Unit (mm) Unit (inch) A 2.3 0.091 B 2.5 0.098 C 4.3 0.169 D 1.8 0.071 E 6.8 0.268 MARKING DIAGRAM P/N = Specific Device Code G = Green Compound YW = Date Code F = Factory Code Document Number: DS_D1410043 Version: J15 HS2A - HS2M Taiwan Semiconductor CREAT BY ART Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. Document Number: DS_D1410043 Version: J15