Subscribe Contact Us Microwaves & RF RSS Advertising Welcome, Doris ! My Account | Sign Out Technologies News Markets Learning Resources Companies Community HOME > TECHNOLOGIES > ACTIVE COMPONENTS > VCO CUTS PHASE NOISE AT 2.5 GHZ Advertisement VCO Cuts Phase Noise at 2.5 GHz Jack Browne | Microwaves and RF Recommend Tweet SHARE Jan 5, 2015 COMMENTS 0 0 EMAIL Model CVCO33CC-25002500 is a voltage-controlled oscillator (VCO) for use at 2.5 GHz. It typically draws 20 mA from a +3.3-VDC supply and tunes (minimally) across a range of 0 to +3.3 VDC with typical tuning sensitivity of 10 MHz/V. It provides at least +5-dBm output power with typical pushing of 1 MHz/V. The VCO exhibits typical spurious content of -20 dBc with typical phase noise of -105 dBc/Hz offset 10 kHz from the carrier and -145 dBc/Hz offset 1 MHz from the carrier. It is supplied in a surface-mount package measuring 0.300 × 0.300 × 0.175 in. and designed for operating temperatures from -20 to +70°C. Crystek Corp., 12730 Commonwealth Dr., Fort Myers, FL 33913; (239) 5613311, (800) 237-3061, FAX: (239) 561-1025 Top Articles 1. Man and Machine: Bonded Together with RF Glue 2. Spectrum Analyzer is Truly Portable Past 6 GHz 3. Antenna Tackles Wi-Fi and WiMAX 4. Filters Build Upon MCSRRs 5. Software Simplifies Microwave Testing Blogs The Missing Ingredient that Could Save Engineering by Jean-Jacques DeLisle Posted 6 weeks ago SHARE PRINT REPRINTS FAVORITE Discuss this Article POSTING AS: Recommend 0 in Splitting Signals EMAIL view all blogs 0 Doris (Sign Out) YOUR COMMENT: * SUBMIT COMMENT Related Articles Tweet Advertisement