.PDF File

MILITARY & AEROSPACE ELECTRONICS
INTELLIGENT AEROSPACE
INTELLIGENT AEROSPACE CONFERENCE & EXHIBITION
SUBSCRIBE | ADVERTISE | ABOUT | CONTACT
HOME
Home
RF & Microwave
TOPICS
DEPARTMENTS
MAGAZINE
WEBCASTS
WHITE PAPERS
EBOOKS
BUYER'S GUIDE
VCO for RF and microwave applications like SATCOM and base stations introduced by Crystek
Open +
VCO for RF and microwave applications like SATCOM and
base stations introduced by Crystek
December 11, 2014
By John Keller
Editor
FORT MYERS, Fla., 11 Dec. 2014.
Crystek Corp. in Fort Myers, Fla., is
introducing the CVCO55FL-0183-0219
voltage controlled oscillator (VCO) for
RF and microwave applications such
as digital radio equipment, fixed
wireless access, satellite
communications (SATCOM) systems,
and base stations.
The VCO operates from 183 MHz to
219 MHz with a control voltage range
of 0.5 to 4.5 volts. This VCO features
a typical phase noise of -123 dBc/Hz
at 10 KHz offset and output power
typically of +8.5 dBm.
Engineered and manufactured in the
U.S., the model CVCO55FL-01830219 is packaged in the industry-standard 0.5-by-0.5-inch SMD package. Input voltage is 5 volts, with a typical current
consumption of 25 milliamps.
Pulling and Pushing are minimized to 0.5 MHz and 0.5 MHz/V, respectively. Second harmonic suppression is -20 dBc
typical. For more information contact Crystek online at www.crystek.com.
Related content
VIDEOS
MOBILE
Similar pages