22,86 Schnitt A-A / 22,86 cross section A-A 15,24 Einpressbolzen / Gewindehülse 0,2 0,3 10,8 12,5 M3 oder/ or 2,54 M3 oder/ or M3 oder/ or 3,81 Nietmutter / riveted nut : l=3.7/5.6/6.0/6.3 press-fit bolt / threaded sleeve : press-fit bolt : #4-40 Einpressbolzen 8,89 #4-40 10,16 #4-40 16,51 3,2 57,7 0,3 69,3 0,3 min. 4,5 3,2 min. 3 l (min. 2.5) 6,3 6,4 6,3 Nietmutter mit Klemmteil clamping thread : 3,05 standoff : 3,2 M3 114182 Abstandshülse / +0,13 (5.9) Gehäuse genietet riveted housing : 8,3 +0,2 124642 55,3 Bauart / Zubehör / Logo : Pressfit 6.3 mm Board hole pattern 144060 Class : 201=0.8µm (30 µin) Au CONTACT, GOLD/LEAD TERMINAL ERNI Refer to table on page 2 Special : Refer to table on page 2 metal plating of plated-through hole für Einpresskontakt Zeichnung 114110 / for press-fit contact drawing 114110 für Einpressbolzen Zeichnung 114109 / for press-fit bolt drawing 114109 Information: 8W8 Accessory : Sonderausführung / Leiterplattenbohrbild 144060 / Schichtaufbau im metallisierten Loch / Terminal Length : Anforderungsstufe / Aufdruck / 0,2 Terminal Type : Type : 6,3 Refer to table on page 2 No. of contacts : Anschlußlänge / max 1,5 6,3 Refer to table on page 2 Part No. : Anschlußart / 3,9 Tolerances Scale 2:1 All Dimensions in mm Consider protection memo from DIN 34 Polzahl / +0,3 +0,2 63,5 Ident-Nr. / 5,8 All rights reserved. Only for information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Subject to modification without prior notice. Drawing will not be updated. Date TMC-P 8W8-EP36-6,3-8 TMC-P 8W8-EP36-6,3-8 www.ERNI.com Index Designation M:00022983.SZN 054994 TMCP I Ordering Information D-Sub Connector High Power Pressfit Vertical Male Assembly Height 6.3mm Number of Pins 8W8 Accessory Termination Side: Pressfit bolt M3 134446 Accessory Termination Side: Pressfit bolt #4-40 134447 Accessory Mating Side: Threaded sleeve M3 Accessory Termination Side: Pressfit bolt 134506 Accessory Mating Side: Threaded sleeve #4-40 134507 Ordering Information press-in tools Number of Pins 8W8 Upper Tool with Quick Change Device Lower Tool 220223 220147 www.erni.com Accessory Termination Side: Pressfit bolt