MINIA TURE FUSEHOLDERS INIATURE Holder / No. 595 Panel Mount, for 5x20 mm Fuses not for new developments; please refer to holder no. 850 Specifications Montage 12.7mm diameter D-hole Admissible torque on plastic hex nut is 1.2Nm 22,7 +0,3 -0,2 2,8 1 +0,3 2 ±0,2 Solderable or 2.8mm quick connect-fits 0.5mm tab Protection Class & Category IP 40 (IEC 60529) 7,1 +0,05 ±0,1 1 Materials Holder: 3,2 ø15 ±0,15 0,5 Te r m i n a l s +0,1 1,7 ±0,05 Cap: Metal Parts: Terminals: SW14 ø12,7 -0,1 M12,7x1,5 Gerätewand panel 12 Electrical Data (23 ºC) Rated Voltage: 250 V max. Current/Power: 6.3 A / 2.5 W 2 ±0,1 -0,1 Duroplastic (Phenolplast PF), black Thermoplastic (Polyamide PA 6.6), UL 94 V-0, black Copper alloy, corrosion protected solderable tinned 3,5 Operating TTemperature emperature -25 °C to 70 °C (consider de-rating) Holes in the Printed Circuit Board Stock Conditions 10 °C to 70 °C Contact Resistance ≤ 5 mΩ Dielectric Strength 3 kV, dry Cap / No. 583 Insulation Resistance > 10 3 MΩ (500 V DC, 1 min.) Solderability 235 ºC, 3 sec. (Wave) 350 ºC, 1 sec. (Soldering Iron) ±0,4 -0,2 15,7 Soldering Heat Resistance ø10,3 Renknase Bayonet-connector-nose 8,5 260 °C, 5 sec. (IEC 60068.2-20) Marking 595, 250 V ±0,5 Schlitz für Schraubendreher Slot for screw-driver Unit weight 3,4 g (595) / 1,7 g (583) Order Information Packaging Bulk (100 St.) Order Numbers Holder Cap No. 595 0000 000 No. 583 0000 000 Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand. 050909 In our continuing strategy to deliver unparalleled circuit protection solutions, technical expertise and application leadership, we proudly introduce the WICKMANN Group and its products to the Littelfuse portfolio. WebSite www.littelfuse.com