SPU Open Style www.vishay.com Vishay Dale Wirewound Resistors, Open Style, Current Shunts, Custom Tailored, Very Low Value, High Precision FEATURES • Custom-made four-terminal resistors to meet your individual specifications Available • Extremely low resistance values for current sensing applications • Precision resistance tolerance • Low temperature coefficients • Complete welded construction • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 The mechanical configurations and electrical properties of our shunts are made to your specifications. The following are examples of “Typical Electrical Specifications” from several existing custom designs. Consult our engineering department for help in designing your own configuration and/or electrical properties, see email address at the bottom of this page. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL POWER RATING P25 °C W RESISTANCE RANGE SPU104 SPU111...1 CURRENT RATING (maximum) A TOLERANCE ±% SPU-104 1.875 0.0025 to 0.010 1 25 SPU-111-1 1 0.005 1 10 SPU-114 1 0.00167 to 0.020 1 10 SPU114 Note • Resistance tolerances available are 0.1 %, 0.25 %, 0.5 %, 1.0 %, 3.0 %, and 5.0 % depending on resistor physical design and resistance value TECHNICAL SPECIFICATIONS PARAMETER Temperature Coefficient UNIT SPU OPEN STYLE RESISTOR CHARACTERISTICS ppm/°C Typical is ± 100 (- 10 °C to + 80 °C) consult factory for tighter TCR availability Resistance Range Dependent upon configuration, consult factory Maximum Current Rating A Dependent upon configuration, consult factory Operating Temperature Range °C - 55 to + 275 GLOBAL PART NUMBER INFORMATION Global Part Numbering example: SPU1115L0000FD1 S P GLOBAL MODEL SPU111 U 1 1 1 5 L 0 RESISTANCE VALUE TOLERANCE CODE L = m (below 0.01 ) R = Decimal 5L0000 = 0.005 R10000 = 0.10 B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % H = ± 3.0 % J = ± 5.0 % 0 0 0 F PACKAGING E = Lead (Pb)-free, bulk D = Tin/lead, bulk D 1 SPECIAL (Dash Number) (up to 2 digits) From 1 to 99 as applicable Historical Part Numbering example: SPU-111-1 0.005 1 % S51 SPU-111-1 0.005 1% S51 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Revision: 11-Jul-13 Document Number: 30240 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SPU Open Style www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] Top View SPU104 End View Side View 0.500 ± 0.020 [12.7 ± 0.508] 0.625 [15.88] max. 0.440 ± 0.005 [11.18 ± 0.127] 0.500 ± 0.020 [12.7 ± 0.508] SPU111...1 0.190 ± 0.005 [4.83 ± 0.127] 0.040 ± 0.005 [1.02 ± 0.127] CL 0.060 ± 0.005 [1.52 ± 0.127] 0.040 [1.02] typ. 0.200 ± 0.005 [5.08 ± 0.127] CL C L Side View CL CL End View 0.525 [13.34] max. 0.100 ± 0.010 [2.54 ± 0.254] 0.350 ± 0.010 [8.89 ± 0.254] SPU114 0.200 ± 0.010 [5.08 ± 0.254] Side View 0.046 ± 0.010 [1.63 ± 0.254] 0.127 [0.005] max. BURR Top View 0.040 ± 0.002 [1.02 ± 0.051] Dia. 0.130 ± 0.010 [3.30 ± 0.254] 0.200 ± 0.010 [5.08 ± 0.254] 0.120 ± 0.020 [3.05 ± 0.508] RAD. 4 PL. CL 0.100 ± 0.010 [2.54 ± 0.254] 0.138 ± 0.113 [3.50 ± 2.87] 0.850 ± 0.025 [21.59 ± 0.635] 1.10 ± 0.010 [27.94 ± 0.254] MATERIAL SPECIFICATIONS AMBIENT TEMPERATURE DERATING Element: Copper-nickel alloy or nickel-chrome alloy, depending on resistor type and/or resistance value Derating is required for ambient temperatures above 25 °C per the following graph: Standard Terminals: SPU104: 100 % Sn, w/Nickel underplate, or 60/40 Sn/Pb coated copper Other Models: 100 % Sn, w/Nickel underplate, or 60/40 Sn/Pb coated Copperweld® Part Marking: None Revision: 11-Jul-13 DERATING RATED POWER IN % Coating: None 120 100 80 60 40 20 0 - 55 - 50 0 50 25 100 150 200 250 275 AMBIENT TEMPERATURE IN °C Document Number: 30240 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000