SIDACtor ® Protection Thyristors Broadband Optimized™ Protection TwinChip™ Series - DO-15 TwinChip™ Series DO-15 are very low capacitance SIDACtor® devices designed to protect broadband CPE equipment, such as VoIP and xDSL modems from damaging overvoltage transients. The series provides a through-hole solution that enables equipment to comply with global regulatory standards while limiting the impact to broadband signals. Features & Benefits t%JGGFSFOUJBMQSPUFDUJPO t-PXWPMUBHFPWFSTIPPU t-PXJOTFSUJPOMPTT t%PFTOPUEFHSBEFXJUIVTF Agency File Number t-PXDBQBDJUBODF E133083 t(%5DPNQBUJCMFBYJBM footprint t'BJMTTIPSUDJSDVJUXIFO surged in excess of ratings Agency Approvals Agency Applicable Global Standards Pinout Designation NOT APPLICABLE Schematic Symbol t5*"" t:%5 t*56,#BTJD-FWFM t:%5 t(3*OUSBCVJMEJOH t:%5 t*&$ Electrical Characteristics Part Number P2602GALRP P3002GALRP P3502GALRP P2602GBLRP P3002GBLRP P3502GBLRP Marking VT VDRM@ IDRM=5μA VS@ 100V/μs IH IS IT V min V max mA min mA max A max V max pF min pF max 220 280 320 220 280 320 300 360 400 300 360 400 150 150 150 150 150 150 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 8 8 8 8 8 8 15 10 10 15 10 10 25 20 20 25 20 20 P262A P30A P352A P262B P30B P352B Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional (unless otherwise noted). © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 49 @ IT = 2.2 Amps Capacitance @1MHz @ 2V bias TwinChip Series Description SIDACtor ® Protection Thyristors Broadband Optimized™ Protection Surge Ratings IPP 10x560μs 10x1000μs 50 / 60 Hz A min A min A min A 50 50 20 B 100 80 25 Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP$ - The device must initially be in thermal equilibrium with -40°C < TJ <¡$ Thermal Considerations Package Symbol Parameter Value Unit TJ Operating Junction Temperature Range UP °C TS Storage Temperature Range UP °C R0JA Thermal Resistance: Junction to Ambient 120 °C/W DO-15 V-I Characteristics tr x td Pulse Waveform IPP – Peak Pulse Current – %IPP +I IT IS IH IDRM -V +V VT VDRM VS tr = rise time to peak value td = decay time to half value Peak Value 100 Waveform = tr x td 50 Half Value 0 td tr 0 t – Time (μs) -I Normalized DC Holding Current vs. Case Temperature Normalized VS Change vs. Junction Temperature 10 IH 8 6 25 °C 4 IH (TC = 25ºC) 2.0 14 12 Ratio of Percent of VS Change – % TwinChip Series Series ITSM 2 0 -4 -6 1.8 1.6 1.4 25°C 1.2 1.0 0.8 0.6 0.4 -8 -40 -20 0 -40 20 40 60 80 100 120 140 160 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - ºC Junction Temperature (TJ) – °C 50 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. SIDACtor ® Protection Thyristors Broadband Optimized™ Protection Soldering Parameters Pb-Free assembly (see Figure 1) Pre Heat - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60-180 secs Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow TP 150°C - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60-150 seconds Peak Temperature (TP) ¡$ Time within 5°C of actual peak Temperature (tp) 30 seconds max Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes max Do not exceed 260°C tP Critical Zone TL to TP Ramp-up TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25ºC to peak) Time Physical Specifications Environmental Specifications Lead Material Copper Alloy High Temp Voltage Blocking 80% Rated VDRM (VAC 1FBL ¡$PS¡$ 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Terminal Finish 100% Matte-Tin Plated Temp Cycling ¡$UP¡$NJOEXFMMVQUP cycles. MIL-STD-750 (Method 1051) EIA/ JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC¡$ 3)VQUPIST EIA/JEDEC, JESD22-A-101 High Temp Storage ¡$IST.*-45%.FUIPE 1031) JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP¡$NJOEXFMMTFDUSBOTGFS 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) ¡$3)BUNVQUPIST EIA/JEDEC, JESD22-A-102 Resistance to Solder Heat ¡$TFDT.*-45%.FUIPE 2031) Moisture Sensitivity Level 3)¡$ISTSFnPXDZDMFT ¡$QFBL +&%&$+45%-FWFM Body Material UL recognized epoxy meeting flammability classification 94V-0 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 51 TwinChip Series - Temperature Min (Ts(min)) Figure 1 Temperature Reflow Condition SIDACtor ® Protection Thyristors Broadband Optimized™ Protection Dimensions — DO-15 B G L Part Numbering Millimeters min max min max B 0.028 0.034 0.711 0.864 D 0.12 0.14 3.048 3.556 G 0.235 0.27 5.969 6.858 L 1 25.4 Part Marking P xxx 2 G x L RP Part Marking Code REEL PACK MEDIAN VOLTAGE RoHS COMPLIANT CONSTRUCTION VARIABLE IPP RATING XXXXX (Refer to Electrical Characteristics Table) TYPE P = SIDACtor Pxxxx TwinChip Series L Inches Dimension D Date Code PACKAGE TYPE Packing Options Package Type Description Quantity Added Suffix Industry Standard G DO-15 Axial Tape & Reel 5000 RP EIA-RS-296-D Tape and Reel Specification — DO-15 A Spacing off center, either side 0.039 (1.0) B 2.55 (64.8) TYP C D E Dimensions are in inches (and millimeters). Symbols Description inch mm A Component Spacing (lead to lead) w 5.08 ± 0.508 B C D E F G Inner Tape Pitch Tape Width Max. Off Alignment Reel Dimension Max. Hub Recess Max. Abor Hole w w w w w w 52.37 ± 1.498 6.35 1.219 330.2 76.19 17.27 3.15 (80.0) TYP recess depth max 0.75” G F Direction of Feed 52 © 2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information.