VJ X8R Dielectric Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for High Temperature Applications FEATURES • Surface mount, precious metal technology, wet build process RoHS COMPLIANT • High operating temperature dielectric, up to + 150 °C • Maintain capacity at high temperature for frequency stability APPLICATIONS • Deephole drilling electronics • High temperature modules ELECTRICAL SPECIFICATIONS Note: Electrical characteristics at + 25 °C unless otherwise specified. Operating Temperature: - 55 °C to + 150 °C Insulation Resistance (IR): At + 25 °C and rated voltage 100 000 MΩ minimum or Capacitance Range: 470 pF to 390 µF 1000 ΩF, whichever is less At + 125 °C and rated voltage 10 000 MΩ minimum or Voltage Rating: 25 Vdc to 50 Vdc 100 ΩF, whichever is less Temperature Coefficient of Capacitance (TCC): Dielectric Withstanding Voltage (DWV): X8R ± 15 % from - 55 °C to + 150 °C This is the maximum voltage the capacitors are tested for a Dissipation Factor (DF): 1 to 5 second period and the charge/discharge current does 25 V ratings: 3.5 % maximum at 1.0 Vrms and 1 kHz not exceed 50 mA. 50 V ratings: 2.5 % maximum at 1.0 Vrms and 1 kHz ≤ 50 Vdc: DWV at 250 % of rated voltage Aging Rate: 1 % maximum per decade Document Number: 45006 Revision: 11-Nov-08 For technical questions, contact: [email protected] www.vishay.com 55 VJ X8R Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Temperature Applications Vishay Vitramon ORDERING INFORMATION VJ0805 H CASE CODE DIELECTRIC 102 0603 0805 1206 1210 H = X8R X A A T ### (2) TERMINATION DC VOLTAGE RATING (1) MARKING PACKAGING PROCESS CODE X = Ni barrier 100 % tin plated. F = AgPd X = 25 V A = 50 V A = Unmarked K CAPACITANCE CAPACITANCE NOMINAL CODE TOLERANCE Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples: 102 = 1000 pF J=±5% K = ± 10 % M = ± 20 % M = Marked Note: Marking is only available for 0805 and 1206 T = 7" reel/plastic tape C = 7" reel/paper tape R = 11 1/4"/13" reel/plastic tape P = 11 1/4"/13" reel/paper tape O = 7" reel flamed paper tape I = 11 1/4"/13" reel flamed paper tape Note: “I” and “O” are used for “F” termination Notes: (1) DC voltage rating should not be exceeded in application (2) Process Code may be added with up to three digits, used to control non-standard products and requirements. I.e. “A2” temporarily used to identify manufacturing plant. DIMENSIONS in inches [millimeters] W L T MAX. P TERMINATION PART ORDERING NUMBER LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 0603 VJ0603 0.063 ± 0.005 [1.60 ± 0.12] 0.031 ± 0.005 [0.80 ± 0.12] 0.036 [0.92] 0.012 [0.30] 0.018 [0.46] 0805 VJ0805 0.079 ± 0.008 [2.00 ± 0.20] 0.049 ± 0.008 [1.25 ± 0.20] 0.057 [1.45] 0.010 [0.25] 0.028 [0.71] 1206 VJ1206 0.126 ± 0.008 [3.20 ± 0.20] 0.063 ± 0.008 [1.60 ± 0.20] 0.067 [1.70] 0.010 [0.25] 0.028 [0.71] 1210 VJ1210 0.126 ± 0.008 [3.20 ± 0.20] 0.098 ± 0.008 [2.50 ± 0.20] 0.067 [1.70] 0.010 [0.25] 0.028 [0.71] EIA STYLE www.vishay.com 56 For technical questions, contact: [email protected] Document Number: 45006 Revision: 11-Nov-08 VJ X8R Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Temperature Applications Vishay Vitramon SELECTION CHART STYLE EIA TYPE VOLTAGE (Vdc) CAP. CODE CAP. 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1000 pF 122 1200 pF 152 1500 pF 182 1800 pF 222 2200 pF 272 2700 pF 332 3300 pF 392 3900 pF 472 4700 pF 562 5600 pF 682 6800 pF 822 8200 pF 103 0.010 µF 123 0.012 µF 153 0.015 µF 183 0.018 µF 223 0.022 µF 273 0.027 µF 333 0.033 µF 393 0.039 µF 473 0.047 µF 563 0.056 µF 683 0.068 µF 823 0.082 µF 104 0.10 µF 124 0.12 µF 154 0.15 µF 184 0.18 µF 224 0.22 µF 274 0.27 µF 334 0.33 µF 394 0.39 µF 474 0.47 µF 564 0.56 µF 684 0.68 µF 824 0.82 µF 105 1.0 µF 125 1.2 µF 155 1.5 µF 185 1.8 µF 225 2.2 µF VJ0603 0603 25 •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• VJ0805 0805 VJ1206 1206 50 25 50 •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • VJ1210 (1) 1210 25 50 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 25 50 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Notes: (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 • Plastic Tape, •• Paper Tape Document Number: 45006 Revision: 11-Nov-08 For technical questions, contact: [email protected] www.vishay.com 57 VJ X8R Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Temperature Applications Vishay Vitramon X8R DIELECTRIC - TYPICAL PARAMETERS 15 10 000 10 5 0 -5 - 10 - 15 1000 (ΩF) INSULATION RESISTANCE % CAPACITANCE CHANGE TYPICAL PARAMETER X8R MINIMUM ISOLATION RESISTANCE VS. TEMPERATURE TYPICAL PARAMETER X8R TEMPERATURE COEFFICIENT OF CAPACITANCE 100 - 20 10 - 75 - 50 - 25 0 25 50 10 75 100 125 150 175 25 TEMPERATURE °C 150 TEMPERATURE °C TYPICAL PARAMETER X8R DISSIPATION FACTOR VS. TEMPERATURE TYPICAL PRAMETER X8R AGING RATE 5.0 1.0 4.5 4.0 3.5 0.0 3.0 2.5 ΔC% % DISSIPATION FACTOR 100 X8R 2.0 - 1.0 - 2.0 1.5 1.0 - 3.0 0.5 0.0 - 75 - 50 - 25 0 25 50 75 100 125 150 175 TEMPERATURE °C www.vishay.com 58 - 4.0 1 10 For technical questions, contact: [email protected] 100 1000 10 000 HOURS Document Number: 45006 Revision: 11-Nov-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1