EZBEND II .250 DIA. LOW LOSS 50 OHM ALUMINUM NOTE: EASYBEND II cable is designed to provide the maximum flexibility in semirigid cable, while maintaining all of the critical electrical performance requirements. Either solder or crimp style connectors can be attached to EASYBEND II. Features Low Loss, High Temperature, increased Phase stability (VP 83% +/- 1.5%) HCMC PART NUMBERS HC 12009-1 HC 12009-3 Impedance (Ohms) 50 +/- 0.5 50 +/- 0.5 Dielectric Strength (KVRMS 60 Hz) 7.5 7.5 Corona Extinction (KVRMS 60 Hz) 3.0 Min 3.0 Min Max Operating Frequency (GHz) 20 20 ELECTRICAL DATA MAX ATTENUATION, db/100 FT. AT 20°C AND AVG. PWR., WATTS, UNITY VSWR, 40°C AMB., STILL AIR FREQUENCY GHz ATTEN. AVG. PWR. ATTEN. AVG. PWR. 1.0 7.5 2800 7.5 2800 10.0 21.0 700 21.0 700 20.0 35.0 400 35.0 400 MECHANICAL DATA Inner Conductor O.D. (inches) .0740 +/- .001 .0740 +/- .001 Inner Conductor Material SPC SPC Inner Dielectric Material T-PTFE T-PTFE Dielectric O.D. (inches) .209 +/- .002 .209 +/- .002 Outer Conductor O.D. (inches) .250 +/- .001 .250 + .002 - .001 Outer Conductor Material AL AL/SN Safe Bend Radius (proper tooling) (inch) 1.0 1.0 Max. Weight (lbs./1000 ft.) 52 55 Operating Temp. Max. Degrees C -55 / +200 -55 / +200 SRC Haverhill - Division of Winchester Electronics 5590 Skylane Boulevard, Santa Rosa, CA 95403-1086 Telephone: 707-573-1900 Fax: 707-573-1999