EZBEND II .086 DIA. 50 OHM ALUMINUM Military (Mil-C-17)Cables NOTE: EASYBEND II cable is designed to povide the maximum flexibility in semirigid cable, while maintaining all of the critical electrical performance requirements. Either solder or crimp style connectors can be attached to EASYBEND II. HCMC PART NUMBERS HC 60000-1 M17/133-00012 HC 60000-3 M17/133-00013 Impedance (Ohms) 50 +/- 1.0 50 +/- 1.0 Dielectric Strength (KVRMS 60 Hz) 5.0 5.0 Corona Extinction (KVRMS 60 Hz) 1.5 Min 1.5 Min Max Operating Frequency (GHz) 40 40 ELECTRICAL DATA MAX ATTENUATION, db/100 FT. AT 20°C AND AVG. PWR., WATTS, UNITY VSWR, 40°C AMB., STILL AIR FREQUENCY GHz ATTEN. AVG. PWR. ATTEN. AVG. PWR. 1.0 23.0 130.0 23.0 130.0 10.0 81.0 35.0 81.0 35.0 20.0 131.0 20.0 131.0 20.0 MECHANICAL DATA Inner Conductor O.D. (inches) .0201 +/- .0005 .0201 +/ .0005 Inner Conductor Material SPCW SPCW Inner Dielectric Material PTFE, F1 PTFE, F1 Dielectric O.D. (inches) .066 +/- .002 .066 +/- .002 Outer Conductor O.D. (inches) .0865 +/- .001 .0865 + .002 -.001 Outer Conductor Material AL AL/SN Safe Bend Radius (proper tooling) (inch) .050 .050 Max. Weight (lbs./1000 ft.) 7.5 8.0 Operating Temp. Max. Degrees C -55 + 125 -55 + 125 SRC Haverhill - Division of Winchester Electronics 5590 Skylane Boulevard, Santa Rosa, CA 95403-1086 Telephone: 707-573-1900 Fax: 707-573-1999