EZBEND II .250 DIA. NON-MAGNETIC 50 OHM ALUMINUM NOTE: EASYBEND II cable is designed to provide the maximum flexibility in semirigid cable, while maintaining all of the critical electrical performance requirements. Either solder or crimp style connectors can be attached to EASYBEND II. HCMC PART NUMBERS HC 12001-1 HC 12001-3 Impedance (Ohms) 50 +/- 0.5 50 +/- 0.5 Dielectric Strength (KVRMS 60 Hz) 7.5 7.5 Corona Extinction (KVRMS 60 Hz) 3.0 Min 3.0 Min Max Operating Frequency (GHz) 20 20 ELECTRICAL DATA MAX ATTENUATION, db/100 FT. AT 20°C AND AVG. PWR., WATTS, UNITY VSWR, 40°C AMB., STILL AIR FREQUENCY GHz ATTEN. AVG. PWR. ATTEN. AVG. PWR. 1.0 8.0 1400.0 8.0 1400.0 10.0 34.0 350.0 34.0 350.0 20.0 49.0 200.0 49.0 200.0 MECHANICAL DATA Inner Conductor O.D. (inches) .0641 +/- .001 .0641 +/- .001 Inner Conductor Material SPC SPC Inner Dielectric Material PTFE, F1 PTFE, F1 Dielectric O.D. (inches) .209 +/- .002 .209 +/- .002 Outer Conductor O.D. (inches) .250 +/- .001 .250 + .002 - .001 Outer Conductor Material AL AL/SN Safe Bend Radius (proper tooling) (inch) 0.250 0.250 Max. Weight (lbs./1000 ft.) 60 63 Operating Temp. Max. Degrees C -55 / +125 -55 / +125 SRC Haverhill - Division of Winchester Electronics 5590 Skylane Boulevard, Santa Rosa, CA 95403-1086 Telephone: 707-573-1900 Fax: 707-573-1999