Catalog DA51.2 - MICROMASTER AC Drives

Catalog DA 51.2 • 2007/2008
© Siemens AG 2007
micromaster
MICROMASTER 420/430/440
Inverters
0.12 kW to 250 kW
© Siemens AG 2007
Related catalogs
SINAMICS G110/SINAMICS G120 D 11.1
Inverter Chassis Units
SINAMICS G120D
Distributed Frequency Inverters
Order No.:
German: E86060-K5511-A111-A4
English: E86060-K5511-A111-A4-7600
SINAMICS G130
D 11
Drive Converter Chassis Units
SINAMICS G150
Drive Converter Cabinet Units
Order No.:
German: E86060-K5511-A101-A3
English: E86060-K5511-A101-A3-7600
Additional documentation
You will find all information material, such as brochures, catalogs,
manuals and operating instructions for standard drive systems
up-to-date on the Internet at the address
http://www.siemens.com/micromaster/printmaterial
You can order the listed documentation or download it in common
file formats (PDF, ZIP).
Catalog CA 01 – Selection tool SD configurator
The selection tool SD configurator is available in combination with
the electronic catalog CA 01.
MICROMASTER/COMBIMASTER
DA 51.3
MICROMASTER 411 Inverters
COMBIMASTER 411
Distributed Drive Solutions
Order No.:
German: E86060-K5251-A131-A2
English: E86060-K5251-A131-A2-7600
Industrial Communication
IK PI
for Automation and Drives
Part 6: ET 200 Distributed I/O
ET 200S FC Frequency Converter
Order No.:
German: E86060-K6710-A101-B5
English: E86060-K6710-A101-B5-7600
Low-Voltage Motors
IEC Squirrel-Cage Motors
Frame sizes 56 to 450
D 81.1
Order No.:
German: E86060-K5581-A111-A2
English: E86060-K5581-A111-A2-7600
Low-Voltage Motors
D 81.1
IEC Squirrel-Cage Motors
News
New Generation 1LE1
Frame size 100 to 160
Order No.:
German: E86060-K5581-A121-A2
English: E86060-K5581-A121-A2-7600
AC NEMA & IEC Motors
Further details available on the
Internet at:
D 81.2
U.S./
Canada
http://www.sea.siemens.com/motors
On CD 2 for the selection and configuring tools, you will find the
SD configurators for low-voltage motors, MICROMASTER 4 inverters,
SINAMICS G110 and SINAMICS G120 inverter chassis units as well
as SINAMICS G120D distributed frequency inverters and SIMATIC
ET 200S FC frequency converters for distributed I/O, complete with:
• Dimension drawing generator for motors
• Data sheet generator for motors and inverters
• Starting calculation
• 3D models in STP format
• Extensive documentation
Hardware and software requirements
• PC with 500 MHz CPU or faster
• Operating systems
– Windows 98/ME
– Windows 2000
– Windows XP
– Windows NT 4.0
(Service Pack 6 or higher)
• 256 MB work memory (minimum)
• Screen resolution 1024 x 768, graphic with more than 256 colors,
small fonts
• 150 MB spare hard disk space (after installation)
• CD-ROM drive
• Windows-compatible sound card
• Windows-compatible mouse
Installation
MOTOX
Geared Motors
D 87.1
Order No.:
German: E86060-K5287-A111-A1
English: Catalog available soon
Catalog CA 01
CA 01
The Offline Mall of Automation and Drives
Order No.:
CD:
E86060-D4001-A100-C6 (Germ.)
CD:
E86060-D4001-A110-C6-7600 (Engl.)
DVD: E86060-D4001-A500-C6 (Germ.)
DVD: E86060-D4001-A510-C6-7600 (Engl.)
A&D Mall
Internet:
http://www.siemens.com/automation/mall
You can install this catalog directly from the CD-ROM as a partial
version or full version on your hard disk or in the network.
© Siemens AG 2007
MICROMASTER
420/430/440
Inverters
0.12 kW to 250 kW
Catalog DA 51.2
2007/2008
Introduction
Siemens
Automation and Drives
0
MICROMASTER
Overview
1
Supersedes:
Catalog DA 51.2 · 2005/2006
The products in this catalog are also included
in the electronic catalog CA 01.
Order No.:
E86060-D4001-A110-C6-7600 (CD-ROM)
E86060-D4001-A510-C6-7600 (DVD)
Contact your local Siemens representative
for further information
MICROMASTER 420
“The universal”
0.12 kW to 11 kW
2
© Siemens AG 2007
MICROMASTER 430
“The specialist for
pumps and fans”
7.5 kW to 250 kW
3
The products and systems described in this
catalog are manufactured/distributed under
application of a certified
quality management
system in accordance
with DIN EN ISO 9001
(Certified Registration
No. DE-000357 QM)
and DIN EN ISO 14001
(Certified Registration
No. 0813420 UM and
EMS 57390). The certificate is recognized by
all IQNet countries.
MICROMASTER 440
“The all-purpose”
0.12 kW to 250 kW
4
Appendix
s
A
© Siemens AG 2007
Siemens Automation and Drives.
Welcome
More than 70,000 people aiming for the same goal:
increasing your competitiveness. That's Siemens
Automation and Drives.
We offer you a comprehensive portfolio for sustained
success in your sector, whether you're talking automation engineering, drives or electrical installation systems. Totally Integrated Automation (TIA) and Totally
Integrated Power (TIP) form the core of our offering.
TIA and TIP are the basis of our integrated range of
products and systems for the manufacturing and process
industries as well as building automation. This portfolio
is rounded off by innovative services over the entire life
cycle of your plants.
Learn for yourself the potential our products and
systems offer. And discover how you can permanently
increase your productivity with us.
Your regional Siemens contact can provide more information. He or she will be glad to help.
0/2
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
Siemens DA 51.2 · 2007/2008
0/3
© Siemens AG 2007
Sharpen your competitive edge.
Totally Integrated Automation
With Totally Integrated Automation (TIA), Siemens is the only
manufacturer to offer an integrated range of products and systems for automation in all sectors – from incoming goods to outgoing goods, from the field level through the production control
level to connection with the corporate management level.
On the basis of TIA, we implement solutions that are perfectly
tailored to your specific requirements and are characterized by a
unique level of integration. This integration not only ensures significant reductions in interface costs but also guarantees the
highest level of transparency across all levels.
ERP – Enterprise Resource Planning
Ethernet
Management Level
MES – Manufacturing Execution Systems
Ethernet
Operations Level
SIMATIC PCS 7
Process Control (DCS)
Industrial Software for
• Maintenance
• Design and Engineering
• Installation and Commissioning • Modernization
and Upgrade
• Operation
Control Level
SIMOTION
Motion Control System
Process Instrumentation
SIMATIC Sensors
PROFINET
Field Level
Industrial Ethernet
PROFIBUS
Totally
Integrated
Automation
0/4
SINUMERIK
Computer Numeric Control
Siemens DA 51.2 · 2007/2008
PROFIBUS PA
AS-Interface
HART
© Siemens AG 2007
It goes without saying that you profit from Totally Integrated
Automation during the entire life cycle of your plants – from
the first planning steps, through operation, right up to modernization. Consistent integration in the further development of
our products and systems guarantees a high degree of investment security here.
Totally Integrated Automation makes a crucial contribution
towards optimizing everything that happens in the plant and
thus creates the conditions for a significant increase in productivity.
SIMATIC IT
SIMATIC WinCC
SCADA System
SIMATIC NET
Industrial
Communication
SIMATIC Controllers
Modular/Embedded/PC-based
SIMATIC HMI
Human Machine Interface
Safety Integrated
SIRIUS Industrial Controls
SENTRON Switching Devices
SIMOCODE pro
Motor Management System
SIMATIC Distributed I/O
SINAMICS Drive Systems
AS-Interface
Totally
Integrated
Power
KNX/EIB
GAMMA instabus
Siemens DA 51.2 · 2007/2008
0/5
© Siemens AG 2007
Protecting the environment
and resources.
Environmental sustainability
Environmental protection will continue to grow in importance
as a result of progressive urbanization and global population
growth. These global mega-trends make the careful and sustainable handling of natural resources a central challenge.
We are convinced that every individual - and especially
every company - has an ecological responsibility. At Siemens
Automation and Drives, we stand by this conviction. Our high
environmental protection goals are part of our strict environmental management. We investigate the possible effects of our
products and systems on the environment right back at the development stage. We concern ourselves, for example, with the
question of how to reduce power consumption in plant
operation - and we offer appropriate solutions, such as our
energy-saving motors that cut power consumption in industrial
manufacturing by up to 40% thanks to their high efficiency
levels.
Many of our products and systems comply with the EC Directive
RoHS (Restriction of Hazardous Substances). All the relevant
Siemens AG sites are, of course, certified in accordance with
DIN EN ISO 14001.
Our commitment goes well beyond compliance with the relevant directives and legislation: we are an active driving force
behind environmental protection, through further development of environmental management systems, for example,
and we are involved in professional associations such as the
German Electrical and Electronic Manufacturers Association
(ZVEI).
0/6
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
Inverter
MICROMASTER
1/2
Selection guide
1/4
Options
1
Siemens DA 51.2 · 2007/2008
1/1
© Siemens AG 2007
®
420/430/440
MICROMASTER 420/430/440
Overview
■ Selection guide
MICROMASTER 410
MICROMASTER 420
Discontinued product
The MICROMASTER 410 is no longer available. The model will be discontinued as of
October 1, 2007. The MICROMASTER 410
can then only be ordered as a spare part.
“The universal”
Power ranges
–
0.12 kW to 11 kW
Voltage ranges
–
1 AC 200 V to 240 V
3 AC 200 V to 240 V
3 AC 380 V to 480 V
Control methods
–
• V/f characteristic
• Multipoint characteristic
(programmable V/f characteristic)
• FCC (flux current control)
Process control
–
Internal PI controller
Inputs
–
3 digital inputs
1 analog input
Outputs
–
1 analog output
1 relay output
Interfacing to automation
system
–
The ideal partner for your automation tasks,
whether with SIMATIC S7-200,
SIMATIC S7-300/400 (TIA) or SIMOTION
Additional features
–
• BICO technology
• Compound braking for controlled rapid braking
Main characteristics
1
for three-phase networks and optional
fieldbus interfacing, e.g. for conveyor belts,
material transport, pumps, fans and machine tools
Section 2
1/2
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
MICROMASTER 420/430/440
Overview
MICROMASTER 430
MICROMASTER 440
“The specialist for pumps and fans”
“The all-purpose”
with optimized OP (manual/automatic switchover), matched
software functionality and optimized power yield
with advanced vector control (with and without encoder feedback)
for versatile applications in sectors such as conveying systems,
textiles, elevators, hoisting equipment and machine construction
7.5 kW to 250 kW
0.12 kW to 250 kW
3 AC 380 V to 480 V
1 AC 200 V to 240 V
3 AC 200 V to 240 V
3 AC 380 V to 480 V
3 AC 500 V to 600 V
• V/f characteristic
• Multipoint characteristic
(programmable V/f characteristic)
• FCC (flux current control)
• V/f characteristic
• Multipoint characteristic
(programmable V/f characteristic)
• FCC (flux current control)
• Vector control
Internal PID controller
Internal PID controller
(autotuning)
6 digital inputs
2 analog inputs
1 PTC/KTY input
6 digital inputs
2 analog inputs
1 PTC/KTY input
2 analog outputs
3 relay outputs
2 analog outputs
3 relay outputs
The ideal partner for your automation tasks, whether with
SIMATIC S7-200, SIMATIC S7-300/400 (TIA) or SIMOTION
The ideal partner for your automation tasks, whether with
SIMATIC S7-200, SIMATIC S7-300/400 (TIA) or SIMOTION
• Low-energy mode
• Load torque monitoring
(detects dry run of pumps)
• Motor staging
• Bypass mode
• BICO technology
•
•
•
•
Section 3
Section 4
1
3 selectable drive data kits
Integrated brake chopper (up to 75 kW)
Torque control
BICO technology
Siemens DA 51.2 · 2007/2008
1/3
© Siemens AG 2007
MICROMASTER 420/430/440
Overview
■ Options
1
Various options are available
for the MICROMASTER
inverters:
■ Filters
■ Chokes
■ Operator panels
■ PROFIBUS module
■ DeviceNet module
■ CANopen module
■ Pulse encoder evaluation
module
■ Gland plates
■ Mounting kits, etc.
1) The MICROMASTER 410 is no
longer available. The model
will be discontinued as of
October 1, 2007. The
MICROMASTER 410 can then
only be ordered as a spare
part.
BOP in new design
(available soon)
Assignment of operator panels and modules to the inverter ranges
Options
Order No.
410 1)
MICROMASTER
420
430
440
%
%
Operator panels
OP 1)
BOP
BOP-2
AOP
AAOP
CAOP
6SE6400-0SP00-0AA0
6SE6400-0BP00-0AA0
6SE6400-0BE00-0AA0
6SE6400-0AP00-0AA1
6SE6400-0AP00-0AB0
6SE6400-0AP00-0CA0
%
%
%
%
%
%
%
%
Modules
PROFIBUS
6SE6400-1PB00-0AA0
DeviceNet
6SE6400-1DN00-0AA0
CANopen
6SE6400-1CB00-0AA0
Pulse encoder evaluation
6SE6400-0EN00-0AA0
Maximum possible configuration:
One pulse encoder evaluation module
+ one communication module + one operator panel
%
%
%
%
%
%
%
% Possible assignment
BOP-2 in new design
(available soon)
AOP
AAOP
DeviceNet
CANopen
Pulse encoder evaluation
Operator panels
PROFIBUS
Modules
1/4
Siemens DA 51.2 · 2007/2008
%
%
%
%
© Siemens AG 2007
Inverter
MICROMASTER 420
2/2
Description
2/4
Circuit diagrams
2/6
Technical data
2/8
Selection and ordering data
2/9
Options
2/18
Dimension drawings
2
Siemens DA 51.2 · 2007/2008
2/1
© Siemens AG 2007
MICROMASTER 420
Description
2
■ Application
The MICROMASTER 420 inverter is suitable for a variety
of variable-speed drive applications. It is especially suitable for applications with
pumps, fans and in conveyor
systems.
It is the ideal cost-optimized
frequency inverter solution.
The inverter is especially characterized by its customer-oriented performance and easeof-use. Its large mains voltage
range enables it to be used all
over the world.
■ Main characteristics
The MICROMASTER 420 inverter has a modular design.
The operator panels and communication modules can be
easily exchanged without requiring any tools.
■ The MICROMASTER 420
■ Modular construction al-
■ LC filter
inverter complies with the
requirements of the EU lowvoltage guideline
■ The MICROMASTER 420
inverter has the > marking
■ acc. to u and cu certified
✔
■ c-tick ●
■
■
■
■
■
lows maximum configuration flexibility
Three fully programmable
isolated digital inputs
One analog input (0 V to
10 V, scaleable) or for use
as 4th digital input
One programmable analog
output (0 mA to 20 mA)
One programmable relay
output (30 V DC/5 A resistive load; 250 V AC/2A inductive load)
Low-noise motor operation
through high pulse frequency, adjustable (observe derating if necessary)
Complete protection for
motor and inverter.
■ Line commutating chokes
■ Output chokes
■ Gland plates
■ Basic Operator Panel
■
■
■
■
■
■
■
■
2/2
■ International standards
■ EMC filter, Class A/B
■
■ Design
■ Options (overview)
■ Easy, guided start-up
Siemens DA 51.2 · 2007/2008
(BOP) for parameterizing
the inverter
Advanced Operator Panel
(AOP) with multi-language
plain text display
Asian Advanced Operator
Panel (AAOP) with Chinese
and English plain text display
Cyrillic Advanced Operator
Panel (CAOP) with Cyrillic,
German and English plain
text display
Communication modules
– PROFIBUS
– DeviceNet
– CANopen
PC connection kits
Mounting kits for installing
the operator panels in the
control cabinet doors
PC start-up programs executable under Windows 98
and NT/2000/ME/
XP Professional
TIA integration with
Drive ES
Note:
See Appendix for standards.
© Siemens AG 2007
MICROMASTER 420
Description
■ Mechanical features
■ Performance features
■ Modular design
■ Latest IGBT technology
■ Operating temperature
■ Digital microprocessor
■
■
■
■
–10 °C to +50 °C
(+14 °F to +122 °F)
Compact housing as a result of high power density
Easy cable connection,
mains and motor connections are separated for optimum electromagnetic compatibility
Detachable operator
panels
Screwless control terminals
■
■
■
■
■
■
■
■
control
Flux Current Control (FCC)
for improved dynamic response and optimized motor control
Linear V/f characteristic
Quadratic V/f characteristic
Multipoint characteristic
(programmable V/f characteristic)
Flying restart
Slip compensation
Automatic restart following
mains failure or fault
Internal PI controller for simple process control
■ Protection features
■ Programmable accelera-
■
■
■
■
■
■
■
tion/deceleration times
from 0 s to 650 s
Ramp smoothing
Fast Current Limit (FCL) for
trip-free operation
Fast, repeatable digital input response time
Fine adjustment using a
high-resolution 10-bit analog input
Compound braking for controlled rapid braking
Four skip frequencies
Removable “Y” capacitor
for use on IT systems (with
non-grounded mains supplies, the “Y” capacitor
must be removed and an
output choke installed).
■ Overload current 1.5 x rat-
■
■
■
■
■
■
■
■
■
ed output current (i.e.
150 % overload capability)
for 60 s, cycle time 300 s
Overvoltage/undervoltage
protection
Inverter overtemperature
protection
Motor protection using PTC
via digital input (possible
with supplementary circuit)
Earth fault protection
Short-circuit protection
I2t motor thermal protection
Locked motor protection
Stall prevention
Parameter interlock
Siemens DA 51.2 · 2007/2008
2
2/3
© Siemens AG 2007
MICROMASTER 420
Circuit diagrams
■ General circuit diagram
PE
1/3 AC 200 - 240 V
3 AC 380 - 480 V
SI
2
≥ 4,7 k Ω
3
PE
+10 V
1
0V
ADC+
A
ADC-
BOP link
D
4
RS232
24 V external
150.00
DIN1
DIN2
2
DIN3
L/L1, N/L2
or
L/L1, N/L2, L3
or
L1, L2, L3
DIN1
5
5
BOP/AOP
DIN2
~
6
6
DIN3
7
7
+
_ 24 V
=
Output +24 V
max. 100 mA
(isolated)
PNP
8
or
NPN
DC+
Output 0 V
max. 100 mA
(isolated)
9
9
DC link
DC−
CPU
RL1-B
30 V DC/5 A (resistive load)
Relay 10 RL1-C
250 V AC/2 A (inductive load)
11
12
=
D
DAC-
A
3~
13
P+
14
N-
60 Hz
Not
used
RS485
COM link
50 Hz
1
2
DIP switch
15
PE
CB
option
The analog input can be used
as an additional digital input
(DIN4)
2
DIN4
3
4
+
–
9
24 V
2/4
Siemens DA 51.2 · 2007/2008
U,V,W
automatic
M
G_DA51_EN_00011
DAC+
0 - 20 mA
max. 500 Ω
© Siemens AG 2007
MICROMASTER 420
Circuit diagrams
■ Terminal connection diagram
Example frame size A
View A
DC link
terminals
Mains
connections
2
Motor
connections
View A
DAC+
DAC-
P+
N-
12
13
14
15
G_DA51_EN_05106
Output relay
RL1
RS-485
(USS protocol)
Analog output
DIN1
DIN2
DIN3
+24 V
5
6
7
8
0 V (isolated)
9
PNP
RL1-B
10
RL1-C
11
NPN
Output relay contacts
Digital inputs
PNP or NPN
possible
+10 V
0V
ADC+
ADC-
1
2
3
4
Voltage
supply 10 V
Analog input
Siemens DA 51.2 · 2007/2008
2/5
© Siemens AG 2007
MICROMASTER 420
Technical data
■ MICROMASTER 420 inverter
Mains voltage and
power ranges
Power frequency
Output frequency
Power factor
Inverter efficiency
Overload capability
Inrush current
Control method
Pulse frequency
Fixed frequencies
Skip frequency ranges
Setpoint resolution
2
1 AC 200 V to 240 V ± 10 %
0.12 kW to 3 kW
3 AC 200 V to 240 V ± 10 %
0.12 kW to 5.5 kW
3 AC 380 V to 480 V ± 10 %
0.37 kW to 11 kW
47 Hz to 63 Hz
0 Hz to 650 Hz
³ 0.95
96 % to 97 % (Further information is available on the Internet at:
http://support.automation.siemens.com/WW/view/en/22978972)
Overload current 1.5 x rated output current (i.e. 150 % overload capability) for 60 s, cycle time 300 s
Less than rated input current
Linear V/f-characteristic; quadratic V/f characteristic; multipoint characteristic
(programmable V/f characteristic); flux current control (FCC)
16 kHz (standard with 1/3 AC 230 V)
4 kHz (standard with 3 AC 400 V)
2 kHz to 16 kHz (in 2 kHz steps)
7, programmable
4, programmable
0.01 Hz digital
0.01 Hz serial
10 bit analog
3 fully programmable isolated digital inputs; switchable PNP/NPN
1, for setpoint or PI controller (0 V to 10 V, scaleable or for use as 4th digital input)
1, programmable, 30 V DC/5 A (resistive load); 250 V AC/2A (inductive load)
1, programmable (0 mA to 20 mA)
RS-485, optional RS-232
Digital inputs
Analog input
Relay outputs
Analog output
Serial interfaces
Motor cable lengths
without output choke max. 50 m (shielded)
max. 100 m (unshielded)
without output choke see variant dependent options
Electromagnetic compatibility
Inverter available with internal EMC filter Class A;
available as options are EMC filters to EN 55 011, Class A or Class B
Braking
DC braking, compound braking
Degree of protection
IP20
Operating temperature
–10 °C to +50 °C (+14 °F to +122 °F)
Storage temperature
–40 °C to +70 °C (–40 °F to +158 °F)
Relative humidity
95 % (non-condensing)
Installation altitude
Up to 1000 m above sea level
without derating
Standard SCCR
10 kA
(Short Circuit Current Rating) 1)
Protection features for
• Undervoltage
• Overvoltage
• Overload
• Earth faults
• Short circuit
• Stall prevention
• Locked motor protection
• Motor overtemperature
• Inverter overtemperature
• Parameter interlock
✔
Compliance with standards
u, cu, >, c-tick ●
> marking
Conformity with low-voltage directive 73/23/EEC
Cooling-air volumetric flow required,
Frame size (FS)
Cooling-air volumetric
H x W x D (mm)
dimensions and weights
flow required (l/s)/(CFM)
A
173 x 73 x 149
(without options)
4.8/10.2
B
202 x 149 x 172
24/51
C
245 x 185 x 195
54.9/116.3
CFM: Cubic Feet per Minute
1) Applies to industrial control
cabinet installations to NEC
article 409/UL 508A.
2/6
For further information, visit us
on the Internet at:
Siemens DA 51.2 · 2007/2008
http://support.automation.
siemens.com/WW/view/en/
23995621
Weight, approx. (kg)
1.0
3.3
5.0
© Siemens AG 2007
MICROMASTER 420
Technical data
■ Derating data
Pulse frequency
Output
(for 3 AC 400 V)
kW
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11
Rated output current in A
for a pulse frequency of
4 kHz
6 kHz
1.2
1.2
1.6
1.6
2.1
2.1
3.0
3.0
4.0
4.0
5.9
5.9
7.7
7.7
10.2
10.2
13.2
13.2
19.0
18.4
26.0
26.0
8 kHz
1.2
1.6
2.1
2.7
2.7
5.1
5.1
6.7
13.2
13.2
17.9
10 kHz
1.2
1.6
2.1
2.7
2.7
5.1
5.1
6.7
13.2
13.2
17.9
12 kHz
1.2
1.6
1.6
1.6
1.6
3.6
3.6
4.8
9.6
9.6
13.5
14 kHz
1.2
1.6
1.6
1.6
1.6
3.6
3.6
4.8
9.6
9.6
13.5
16 kHz
1.1
1.1
1.1
1.1
1.1
2.6
2.6
3.6
7.5
7.5
10.4
Operating temperature
R a te d o u tp u t c u rre n t
A D A 5 1 -5 0 1 7 e
2
1 0 0
%
8 0
6 0
5 0
4 0
2 0
0
-1 0
0
1 0
2 0
3 0
4 0
5 0
6 0 °C 7 0
O p e r a tin g te m p e r a tu r e
Installation altitude above sea level
Permissible output current
in % of the rated output current
ADA51-5018c
Rated output current
100
%
80
60
40
20
0
0
1000
2000
3000 m 4000
Operational altitude
Permissible mains voltage
in % of the max. possible mains voltage
ADA51-5019b
Mains voltage
100
%
80
77
60
40
20
0
0
1000
2000
3000 m 4000
Operational altitude
Siemens DA 51.2 · 2007/2008
2/7
© Siemens AG 2007
MICROMASTER 420
Selection and ordering data
■ MICROMASTER 420 inverter
Output
kW
Rated input
current 1)
hp
Rated output
current
A
A
Frame size
Order No.
MICROMASTER 420
without filter 3)
MICROMASTER 420
with internal filter
Class A 2)
A
A
A
A
A
B
B
B
C
6SE6420-2UC11-2AA1
6SE6420-2UC12-5AA1
6SE6420-2UC13-7AA1
6SE6420-2UC15-5AA1
6SE6420-2UC17-5AA1
6SE6420-2UC21-1BA1
6SE6420-2UC21-5BA1
6SE6420-2UC22-2BA1
6SE6420-2UC23-0CA1
6SE6420-2AB11-2AA1
6SE6420-2AB12-5AA1
6SE6420-2AB13-7AA1
6SE6420-2AB15-5AA1
6SE6420-2AB17-5AA1
6SE6420-2AB21-1BA1
6SE6420-2AB21-5BA1
6SE6420-2AB22-2BA1
6SE6420-2AB23-0CA1
A
A
A
A
A
B
B
B
C
C
C
6SE6420-2UC11-2AA1
6SE6420-2UC12-5AA1
6SE6420-2UC13-7AA1
6SE6420-2UC15-5AA1
6SE6420-2UC17-5AA1
6SE6420-2UC21-1BA1
6SE6420-2UC21-5BA1
6SE6420-2UC22-2BA1
6SE6420-2UC23-0CA1
6SE6420-2UC24-0CA1
6SE6420-2UC25-5CA1
–
–
–
–
–
–
–
–
6SE6420-2AC23-0CA1
6SE6420-2AC24-0CA1
6SE6420-2AC25-5CA1
A
A
A
A
A
B
B
B
C
C
C
6SE6420-2UD13-7AA1
6SE6420-2UD15-5AA1
6SE6420-2UD17-5AA1
6SE6420-2UD21-1AA1
6SE6420-2UD21-5AA1
6SE6420-2UD22-2BA1
6SE6420-2UD23-0BA1
6SE6420-2UD24-0BA1
6SE6420-2UD25-5CA1
6SE6420-2UD27-5CA1
6SE6420-2UD31-1CA1
–
–
–
–
–
6SE6420-2AD22-2BA1
6SE6420-2AD23-0BA1
6SE6420-2AD24-0BA1
6SE6420-2AD25-5CA1
6SE6420-2AD27-5CA1
6SE6420-2AD31-1CA1
(FS)
Mains operating voltage 1 AC 200 V to 240 V
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
1.8
3.2
4.6
6.2
8.2
11.0
14.4
20.2
35.5
0.9
1.7
2.3
3.0
3.9
5.5
7.4
10.4
13.6
Mains operating voltage 3 AC 200 V to 240 V
2
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
1.1
1.9
2.7
3.6
4.7
6.4
8.3
11.7
15.6
19.7
26.5
0.9
1.7
2.3
3.0
3.9
5.5
7.4
10.4
13.6
17.5
22.0
Mains operating voltage 3 AC 380 V to 480 V
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
10.0
15.0
2.2
2.8
3.7
4.9
5.9
7.5
10.0
12.8
15.6
22.0
32.3
1.2
1.6
2.1
3.0
4.0
5.9
7.7
10.2
13.2
19.0
26.0
See Appendix for note on ordering.
1) Supplementary conditions:
Input current at rated operating
point, applicable at shortcircuit voltage of the supply
Usc = 2 % with reference to the
2/8
■ Motors for
MICROMASTER 420
All MICROMASTER 420 inverters are supplied with a Status
Display Panel (SDP). A BOP,
AOP or other options have to
be ordered separately (see
Pages 2/12 to 2/16).
Catalog D 81.1 contains selection and ordering data for
motors which are particularly
suitable for operation with the
MICROMASTER 420 inverters
(see Appendix for overview).
inverter rated power and rated
mains voltage of 240 V or 400 V
without a line commutating
choke.
2) Use of MICROMASTER inverters with internal filter is not permissible on non-grounded (IT)
mains supplies.
Siemens DA 51.2 · 2007/2008
This catalog is suitable for IEC
motors. For motors according
to US standards (NEMA)
please refer to Catalog D 81.2
U.S./Canada (see Appendix
for overview) and to:
http://www.sea.siemens.com/
motors
3) Acc. to EMC EN 61800-3 generally suited to heavy industrial
applications. For details please
refer to Appendix on page A/4.
© Siemens AG 2007
MICROMASTER 420
Options
Variant dependent options
■ Overview
EMC filter, Class A
Filter for inverters without an
internal filter for
– 3 AC 200 V to 240 V,
frame sizes A and B
– 3 AC 380 V to 480 V,
frame size A.
All other inverters can be supplied with an internal Class A
filter.
The requirements are fulfilled
using shielded cables with a
max. length of 25 m.
EMC filter, Class B
Filter for inverters without an
internal filter for
– 3 AC 200 V to 240 V,
frame sizes A and B
– 3 AC 380 V to 480 V,
frame size A.
With this filter, the inverter
complies with the emission
standard EN 55 011, Class B
for conducted interference
emissions.
The requirements are fulfilled
using shielded cables with a
max. length of 25 m.
Additional EMC filter,
Class B
Available for inverters with an
internal Class A EMC filter.
With this filter, the inverter
complies with the emission
standard EN 55 011, Class B
for conducted interference
emissions.
The requirements are fulfilled
using shielded cables with a
max. length of 25 m.
Filter Class B with low
leakage currents
EMC filter for 1 AC 200 V to
240 V inverters, frame sizes A
and B, without an internal EMC
filter Class A.
With this filter, the inverter
complies with the emission
standard EN 55 011, Class B
for conducted interference
emissions. The leakage currents are reduced to
< 3.5 mA.
The requirements are fulfilled
using shielded cables with a
max. length of 5 m.
Leakage currents:
The leakage currents of the inverters with/without filter (internal/external) may exceed
30 mA. Typical values in practice are between 10 mA and
50 mA. The exact values depend on the design, environment and cable lengths. Interference-free operation with residual current operated devices with a trigger value of
30 mA cannot be guaranteed.
However, operation with residual current circuit-breakers
with a trigger value of 300 mA
is possible. Please refer to the
Instruction Manual for details.
LC filter
The LC filter limits the rate of
rise of voltage and the capacitive charge/discharge currents which usually occur with
inverter operation. This means
that much longer shielded motor cables are possible when
using LC filters and the service life of the motor achieves
values similar to those with
direct mains operation.
Use of an output choke isn’t
required with that.
Please note when using
LC filters:
• Only V/f, FCC control permissible
• Please observe the derating
of 15 % when selecting the
appropriate inverter
• Operation only permissible
with 4 kHz pulse frequency
• The output frequency is limited to 150 Hz
• Operation and commissioning only with connected motor as the LC filter is not
idling-proof!
The LC filters can be used for
all MICROMASTER 420 inverters of frame sizes A to C.
Line commutating choke
Line commutating chokes
are used to smooth voltage
peaks or to bridge commutating dips. In addition, line commutating chokes reduce the
effects of harmonics on the inverter and the power supply. If
the line impedance is <1 %, a
line commutating choke must
be used in order to reduce the
current peaks.
In line with EN 61 000-3-2 regulations “Limits for harmonic
currents with device input current £16 A per phase”, there
are special aspects for drives
with 250 W to 550 W and
230 V single-phase supplies
which can be used in non-industrial applications (1st environment).
For devices with 250 W and
370 W, it is necessary either to
fit the recommended input
chokes or to apply to the power utility company for authorization to connect the devices
to the public power supply.
No limits are currently defined
in the EN 61 000-3-2 standard
for professionally used devices with a connected load
> 1 kW which means that the
inverters with an output power
³ 0.75 kW comply with the
EN 61 000-3-2 standard.
However, in accordance with
the regulations of EN 61000-312 “Limits for harmonic currents > 16 A and £ 75 A per
phase” an approval is necessary from the power supplier
for drives that are intended to
be connected to the public
low-voltage network. Please
refer to the Operating Instructions for the values of the harmonic currents.
Output choke
Output chokes can be supplied for reducing the capacitive currents and dV/dt in the
case of motor cables > 50 m
(shielded) or > 100 m (unshielded).
For max. permissible cable
lengths, see Technical Data.
Gland plate
The gland plate facilitates the
shield connection of power
and control cables and ensures optimum EMC performance.
Siemens DA 51.2 · 2007/2008
2/9
2
© Siemens AG 2007
MICROMASTER 420
Options
Variant dependent options
■ Technical data
LC filter
Mains voltage
Current (at 40 °C/50 °C)
2
3 AC 380 V to 480 V
for frame size A 4.5 A/ 4.1 A
for frame size B 11.2 A/10.2 A
for frame size C 32.6 A/29.7 A
Limiting of motor overvoltage
£ 1078 V
dV/dt limiting
£ 500 V/ms
Pulse frequency
4 kHz
Max. motor frequency
150 Hz
Max. permissible motor cable
shielded 200 m
lengths
unshielded 300 m
Insulation strength
Overvoltage category III to VDE 0110
Electromagnetic compatibility
Up to 200 m motor cable length with emissions to Class A according to EN 55 011 in
conjunction with filtered inverters and unshielded cables
Conformity
CE according to the low-voltage directive 73/23/EEC
Approvals
UL available soon
Strain resistance
EN 60 068-2-31
Humidity
95 % humidity, non-condensing
Degree of protection
IP20 (to EN 60529)
Insulation class
H (180 °C)
Permissible temperature
Operation –10 °C to +40 °C (+14 °F to +104 °F) 100 % Pn
to +50 °C (to +122 °F)
80 % Pn
Storage –25 °C to +70 °C (–13 °F to +158 °F)
Installation altitude
up to 2000 m 100 % Pn
2000 to 4000 m 62.5 % Pn
Mounting position
Footprint or suspended
Free space
Top 100 mm
Bottom 100 mm
Side 100 mm
Connection system
Input, litz wire or terminal 1U1, 1V1, 1W1
Output, terminals 1U2, 1V2, 1W2
Torque for power conductor connections
1.5 Nm to 1.8 Nm
Weight, approx.
for frame size A 7 kg
for frame size B 11 kg
for frame size C 29 kg
Max. permissible cable lengths from the motor to the inverter when using output chokes
The following table shows the
maximum permissible cable
lengths from the motor to the
inverter when using output
chokes.
Frame size
Output choke
(FS)
A
A
B
C
Type
6SE6400-3TC00-4AD3
6SE6400-3TC00-4AD2
6SE6400-3TC01-0BD3
6SE6400-3TC03-2CD3
2/10
Siemens DA 51.2 · 2007/2008
Max. permissible motor cable lengths (shielded/unshielded)
for a mains voltage of
200 V to 240 V ± 10 %
380 V to 400 V ± 10 %
401 V to 480 V ± 10 %
200 m/300 m
–
–
200 m/300 m
150 m/225 m
100 m/150 m
200 m/300 m
150 m/225 m
100 m/150 m
200 m/300 m
200 m/300 m
100 m/150 m
© Siemens AG 2007
MICROMASTER 420
Options
Variant dependent options
■ Design
■ A maximum of two footprint
■ The EMC filter must be
components plus inverter
are permissible.
■ If an LC filter is used, it must
be mounted directly on the
wall of the control cabinet
due to weight reasons.
If an LC filter of frame size C
is used, therefore, only one
footprint component is permissible. If a line choke and
LC filter are used, the line
choke must be located on
the left of the inverter.
Required distance between
line choke and inverter:
75 mm.
mounted directly below the
frequency inverter if possible.
■ If mounted on the side, the
line-side components are to
be mounted to the left of the
frequency inverter whereas
the output-side components are to be mounted to
the right of the frequency
inverter.
G_DA51_EN_05016d
General installation instructions
Position 2
Position 1
2
Example of installation with frequency inverter,
EMC filter (position 1) and line choke (position 2)
Availability of the options as footprint components
Line commutating choke
EMC filter
LC filter
Output choke
Frame size
A
✓
✓
✓
✓
B
✓
✓
✓
✓
C
✓
✓
✓
✓
Recommended combinations of inverters and options
Frequency inverter
Frame size
Footprint
Position 1
A and B
EMC filter
EMC filter or
Line commutating choke
EMC filter
EMC filter or
Line commutating choke
LC filter
C
Position 2
Mounted on side
To the left of the inverter
(for line-side components)
Line commutating choke
Output choke or
LC filter
Line commutating choke
Output choke
–
–
To the right of the inverter
(for output-side components)
Output choke
–
–
–
Output choke
–
–
EMC filter and/or
Line commutating choke
–
Siemens DA 51.2 · 2007/2008
2/11
© Siemens AG 2007
MICROMASTER 420
Options
Variant dependent options
■ Selection and ordering data
The options listed here (filters,
chokes, gland plates, fuses,
and circuit-breakers) must be
selected to match the inverter.
Mains voltage
1 AC 200 V to 240 V
3 AC 200 V to 240 V
2
3 AC 380 V to 480 V
1 AC 200 V to 240 V
3 AC 200 V to 240 V
3 AC 380 V to 480 V
2/12
The inverter and the associated options have the same voltage ratings. Alternatively fuses and circuit-breakers can be
Output
Inverter
without filter
kW
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11
hp
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
10.0
15.0
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
3.0
4.0
5.5
2.2
3.0
4.0
5.5
7.5
11
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
4.0
5.0
7.5
3.0
4.0
5.0
7.5
10.0
15.0
6SE6420-2UC11-2AA1
6SE6420-2UC12-5AA1
6SE6420-2UC13-7AA1
6SE6420-2UC15-5AA1
6SE6420-2UC17-5AA1
6SE6420-2UC21-1BA1
6SE6420-2UC21-5BA1
6SE6420-2UC22-2BA1
6SE6420-2UC23-0CA1
6SE6420-2UC11-2AA1
6SE6420-2UC12-5AA1
6SE6420-2UC13-7AA1
6SE6420-2UC15-5AA1
6SE6420-2UC17-5AA1
6SE6420-2UC21-1BA1
6SE6420-2UC21-5BA1
6SE6420-2UC22-2BA1
6SE6420-2UC23-0CA1
6SE6420-2UC24-0CA1
6SE6420-2UC25-5CA1
6SE6420-2UD13-7AA1
6SE6420-2UD15-5AA1
6SE6420-2UD17-5AA1
6SE6420-2UD21-1AA1
6SE6420-2UD21-5AA1
6SE6420-2UD22-2BA1
6SE6420-2UD23-0BA1
6SE6420-2UD24-0BA1
6SE6420-2UD25-5CA1
6SE6420-2UD27-5CA1
6SE6420-2UD31-1CA1
Inverter
with internal filter Class A
6SE6420-2AB11-2AA1
6SE6420-2AB12-5AA1
6SE6420-2AB13-7AA1
6SE6420-2AB15-5AA1
6SE6420-2AB17-5AA1
6SE6420-2AB21-1BA1
6SE6420-2AB21-5BA1
6SE6420-2AB22-2BA1
6SE6420-2AB23-0CA1
6SE6420-2AC23-0CA1
6SE6420-2AC24-0CA1
6SE6420-2AC25-5CA1
6SE6420-2AD22-2BA1
6SE6420-2AD23-0BA1
6SE6420-2AD24-0BA1
6SE6420-2AD25-5CA1
6SE6420-2AD27-5CA1
6SE6420-2AD31-1CA1
Siemens DA 51.2 · 2007/2008
provided. Both provide short
circuit protection of the inverter supply line and the inverter.
A semiconductor protection of
the inverter with the suggested 3NA... fuses and the 3RV...
circuit-breakers is not envisaged.
Order No. of the options
EMC filter
Class A
EMC filter
Class B
Additional EMC filter,
Class B
–
–
–
–
–
–
–
–
–
6SE6400-2FA00-6AD0
6SE6400-2FL01-0AB0
with low leakage
currents
–
6SE6400-2FB00-6AD0
6SE6400-2FA01-4BC0
6SE6400-2FB01-4BC0
–
–
–
6SE6400-2FA00-6AD0
–
–
–
6SE6400-2FB00-6AD0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
6SE6400-2FL02-6BB0
with low leakage
currents
6SE6400-2FS01-0AB0
6SE6400-2FS02-6BB0
6SE6400-2FS03-5CB0
6SE6400-2FS03-8CD0
6SE6400-2FS01-6BD0
6SE6400-2FS03-8CD0
© Siemens AG 2007
MICROMASTER 420
Options
Variant dependent options
■ Selection and ordering data (continued)
All options are certified to
u, except fuses.
The fuses of Type 3NA3 are
recommended for Europe.
Mains voltage
1 AC 200 V to 240 V
3 AC 200 V to 240 V
3 AC 380 V to 480 V
1 AC 200 V to 240 V
3 AC 200 V to 240 V
3 AC 380 V to 480 V
Additional information on
the listed fuses and circuitbreakers can be found in
Catalogs LV 1 and LV 1 T.
Output
Inverter
without filter
kW
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11
hp
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
10.0
15.0
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
3.0
4.0
5.5
2.2
3.0
4.0
5.5
7.5
11
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
4.0
5.0
7.5
3.0
4.0
5.0
7.5
10.0
15.0
6SE6420-2UC11-2AA1
6SE6420-2UC12-5AA1
6SE6420-2UC13-7AA1
6SE6420-2UC15-5AA1
6SE6420-2UC17-5AA1
6SE6420-2UC21-1BA1
6SE6420-2UC21-5BA1
6SE6420-2UC22-2BA1
6SE6420-2UC23-0CA1
6SE6420-2UC11-2AA1
6SE6420-2UC12-5AA1
6SE6420-2UC13-7AA1
6SE6420-2UC15-5AA1
6SE6420-2UC17-5AA1
6SE6420-2UC21-1BA1
6SE6420-2UC21-5BA1
6SE6420-2UC22-2BA1
6SE6420-2UC23-0CA1
6SE6420-2UC24-0CA1
6SE6420-2UC25-5CA1
6SE6420-2UD13-7AA1
6SE6420-2UD15-5AA1
6SE6420-2UD17-5AA1
6SE6420-2UD21-1AA1
6SE6420-2UD21-5AA1
6SE6420-2UD22-2BA1
6SE6420-2UD23-0BA1
6SE6420-2UD24-0BA1
6SE6420-2UD25-5CA1
6SE6420-2UD27-5CA1
6SE6420-2UD31-1CA1
Inverter
with internal filter Class A
6SE6420-2AB11-2AA1
6SE6420-2AB12-5AA1
6SE6420-2AB13-7AA1
6SE6420-2AB15-5AA1
6SE6420-2AB17-5AA1
6SE6420-2AB21-1BA1
6SE6420-2AB21-5BA1
6SE6420-2AB22-2BA1
6SE6420-2AB23-0CA1
6SE6420-2AC23-0CA1
6SE6420-2AC24-0CA1
6SE6420-2AC25-5CA1
6SE6420-2AD22-2BA1
6SE6420-2AD23-0BA1
6SE6420-2AD24-0BA1
6SE6420-2AD25-5CA1
6SE6420-2AD27-5CA1
6SE6420-2AD31-1CA1
Use in America requires ulisted fuses such as the Class
NON/NOS range from
Bussmann.
Order No. of the options
Line commutating
choke
LC filter
Output choke
6SE6400-3CC00-4AB3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
6SE6400-3TD00-4AD0
6SE6400-3TC00-4AD3
6SE6400-3TC00-4AD2
6SE6400-3CC00-6AD3
6SE6400-3CC01-0BD3
6SE6400-3TD01-0BD0
6SE6400-3TC01-0BD3
6SE6400-3CC01-4BD3
6SE6400-3CC02-2CD3
6SE6400-3TD03-2CD0
6SE6400-3TC03-2CD3
6SE6400-3TC00-4AD3
6SE6400-3CC01-0BD3
–
–
–
–
–
–
–
–
–
–
–
–
6SE6400-3TD01-0BD0
6SE6400-3TC01-0BD3
6SE6400-3CC01-4BD3
6SE6400-3CC02-2CD3
6SE6400-3TD03-2CD0
6SE6400-3TC03-2CD3
6SE6400-3CC01-0AB3
6SE6400-3CC02-6BB3
6SE6400-3CC03-5CB3
6SE6400-3CC00-3AC3
6SE6400-3CC00-5AC3
6SE6400-3CC00-8BC3
6SE6400-3CC01-4BD3
6SE6400-3CC01-7CC3
6SE6400-3CC03-5CD3
6SE6400-3CC00-2AD3
6SE6400-3TC01-0BD3
6SE6400-3TC03-2CD3
6SE6400-3TC00-4AD3
2
6SE6400-3TC01-0BD3
6SE6400-3TC03-2CD3
6SE6400-3CC00-4AD3
6SE6400-3CC03-5CD3
6SE6400-3CC00-4AB3
6SE6400-3CC01-0AB3
6SE6400-3CC02-6BB3
6SE6400-3CC03-5CB3
6SE6400-3CC01-7CC3
6SE6400-3CC03-5CD3
6SE6400-3TC01-0BD3
6SE6400-3TC03-2CD3
6SE6400-3TC03-2CD3
6SE6400-3CC03-5CD3
Siemens DA 51.2 · 2007/2008
2/13
© Siemens AG 2007
MICROMASTER 420
Options
Variant dependent options
■ Selection and ordering data (continued)
Mains voltage
Output
Inverter
without filter
Order No. of the options
Gland plate
kW
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
3 AC 200 V to 240 V 0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
3 AC 380 V to 480 V 0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11
hp
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
10.0
15.0
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
3 AC 200 V to 240 V 3.0
4.0
5.5
3 AC 380 V to 480 V 2.2
3.0
4.0
5.5
7.5
11
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
4.0
5.0
7.5
3.0
4.0
5.0
7.5
10.0
15.0
1 AC 200 V to 240 V
2
1 AC 200 V to 240 V
2/14
6SE6420-2UC11-2AA1 6SE6400-0GP00-0AA0
6SE6420-2UC12-5AA1
6SE6420-2UC13-7AA1
6SE6420-2UC15-5AA1
6SE6420-2UC17-5AA1
6SE6420-2UC21-1BA1 6SE6400-0GP00-0BA0
6SE6420-2UC21-5BA1
6SE6420-2UC22-2BA1
6SE6420-2UC23-0CA1 6SE6400-0GP00-0CA0
6SE6420-2UC11-2AA1 6SE6400-0GP00-0AA0
6SE6420-2UC12-5AA1
6SE6420-2UC13-7AA1
6SE6420-2UC15-5AA1
6SE6420-2UC17-5AA1
6SE6420-2UC21-1BA1 6SE6400-0GP00-0BA0
6SE6420-2UC21-5BA1
6SE6420-2UC22-2BA1
6SE6420-2UC23-0CA1 6SE6400-0GP00-0CA0
6SE6420-2UC24-0CA1
6SE6420-2UC25-5CA1
6SE6420-2UD13-7AA1 6SE6400-0GP00-0AA0
6SE6420-2UD15-5AA1
6SE6420-2UD17-5AA1
6SE6420-2UD21-1AA1
6SE6420-2UD21-5AA1
6SE6420-2UD22-2BA1 6SE6400-0GP00-0BA0
6SE6420-2UD23-0BA1
6SE6420-2UD24-0BA1
6SE6420-2UD25-5CA1 6SE6400-0GP00-0CA0
6SE6420-2UD27-5CA1
6SE6420-2UD31-1CA1
Inverter
with internal filter Class A
6SE6420-2AB11-2AA1 6SE6400-0GP00-0AA0
6SE6420-2AB12-5AA1
6SE6420-2AB13-7AA1
6SE6420-2AB15-5AA1
6SE6420-2AB17-5AA1
6SE6420-2AB21-1BA1 6SE6400-0GP00-0BA0
6SE6420-2AB21-5BA1
6SE6420-2AB22-2BA1
6SE6420-2AB23-0CA1 6SE6400-0GP00-0CA0
6SE6420-2AC23-0CA1 6SE6400-0GP00-0CA0
6SE6420-2AC24-0CA1
6SE6420-2AC25-5CA1
6SE6420-2AD22-2BA1 6SE6400-0GP00-0BA0
6SE6420-2AD23-0BA1
6SE6420-2AD24-0BA1
6SE6420-2AD25-5CA1 6SE6400-0GP00-0CA0
6SE6420-2AD27-5CA1
6SE6420-2AD31-1CA1
Siemens DA 51.2 · 2007/2008
Fuse
(see Catalog LV 1)
Circuit-breaker
(see Catalog LV 1)
3NA3803
3RV1021-1DA10
3RV1021-1GA10
3RV1021-1HA10
3RV1021-1JA10
3RV1021-4AA10
3RV1021-4BA10
3RV1021-4DA10
3RV1031-4FA10
3RV1031-4HA10
3RV1021-1AA10
3RV1021-1DA10
3RV1021-1EA10
3RV1021-1GA10
3RV1021-1HA10
3RV1021-1KA10
3RV1021-4AA10
3RV1021-4BA10
3RV1021-4CA10
3RV1031-4EA10
3RV1031-4FA10
3RV1021-1CA10
3RV1021-1DA10
3RV1021-1EA10
3RV1021-1GA10
3RV1021-1HA10
3RV1021-1JA10
3RV1021-1KA10
3RV1021-4AA10
3RV1021-4CA10
3RV1031-4EA10
3RV1031-4GA10
3NA3805
3NA3807
3NA3812
3NA3817
3NA3803
3NA3805
3NA3807
3NA3810
3NA3812
3NA3814
3NA3803
3NA3805
3NA3807
3NA3810
3NA3814
3NA3803
3NA3805
3NA3807
3NA3812
3NA3817
3NA3810
3NA3812
3NA3814
3NA3805
3NA3807
3NA3810
3NA3814
3RV1021-1DA10
3RV1021-1GA10
3RV1021-1HA10
3RV1021-1JA10
3RV1021-4AA10
3RV1021-4BA10
3RV1021-4DA10
3RV1031-4FA10
3RV1031-4HA10
3RV1021-4CA10
3RV1031-4EA10
3RV1031-4FA10
3RV1021-1JA10
3RV1021-1KA10
3RV1021-4AA10
3RV1021-4CA10
3RV1031-4EA10
3RV1031-4GA10
© Siemens AG 2007
MICROMASTER 420
Options
Variant independent options
■ Overview
Basic Operator Panel (BOP)
With the BOP, individual parameter settings can be made.
Values and units are shown on
a 5-digit display.
Asian Advanced Operator
Panel (AAOP)
The AAOP is the Chinese version of the AOP operator panel. It has an enhanced display
and supports the operating
languages of Chinese (simplified) and English.
DeviceNet module
For networking the inverters to
the DeviceNet fieldbus system
widely used on the American
market. A maximum transmission rate of 500 Kbaud is possible. Remote control of the inverter is possible with the DeviceNet module. Remote control and operation at the inverter can be combined using an
operator panel plugged onto
the DeviceNet module.
The connection to the DeviceNet bus system is made
using a 5-pin connector with
terminal strip.
CANopen module
Basic Operator Panel (BOP)
A BOP can be used for several
inverters. It can be directly
mounted on the inverter or in a
control cabinet door using a
mounting kit.
Advanced Operator Panel
(AOP)
The AOP enables parameter
kits to be read out of the inverter or to be written into the inverter (upload/download). Different parameter kits can be
stored in the AOP. It has a
plain text display with the possibility of switching between
several languages.
Advanced Operator Panel (AOP)
Asian Advanced Operator Panel
(AAOP)
Cyrillic Advanced Operator
Panel (CAOP)
The CAOP is the Cyrillic version of the AOP Advanced
Operator Panel. It supports
the Cyrillic, German and English operator languages.
PROFIBUS module
For a complete PROFIBUS
connection with up to
£12 Mbaud. Remote control
of the inverter is possible with
the PROFIBUS module. Remote control and operation at
the inverter can be combined
using an operator panel
plugged onto the PROFIBUS
module. The PROFIBUS module can be supplied by an external 24 V DC power supply
and is thus also active when
the inverter is disconnected
from the power supply.
Connection by means of a
9-pin Sub-D connector (available as an option).
Up to 30 inverters can be controlled from an AOP via USS. It
can be directly mounted on
the inverter or in a control cabinet door using a mounting kit.
1) A shielded cable of type
Belden 8132 (28 AWG) is
recommended. The maximum
cable length is 5 m for RS-232.
Using the CANopen communications module, an inverter
can be linked to the CANopen
fieldbus system and remote
control is then possible.
Remote control and operation
at the inverter can be combined using an operator panel
plugged onto the CANopen
module.
The module is connected to
the bus system through a
9-pin Sub-D connector.
Connection kit for
PC to inverter
For controlling an inverter directly from a PC if the appropriate software has been installed (e.g. STARTER).
Isolated RS-232 adapter module for reliable point-to-point
connection to a PC. Includes a
Sub-D connector and an
RS-232 standard cable (3 m).
Connection kit for PC
to AOP
For connecting a PC to an
AOP or AAOP. Offline programming of inverters and archiving of parameter kits possible. Includes a desktop attachment kit for an AOP or
AAOP, an RS-232 standard
cable (3 m) with Sub-D connectors and a universal power
supply unit.
Operator panel door mounting kit for single inverter
For mounting an operator panel in a control cabinet door.
Degree of protection IP56.
Contains a cable adapter
module with screwless terminals for use with user's own
RS-232-cables 1).
AOP door mounting kit for
multiple inverters (USS)
For mounting an AOP or AAOP
in a control cabinet door.
Degree of protection IP56. The
AOP or AAOP can communicate with several inverters by
means of the RS-485 USS
protocol. The 4-pin connecting cable from the AOP or
AAOP to the RS-485 terminals
of the inverter and to the 24 V
user terminal strip is not
included 2).
Start-up tools
• STARTER
is a graphic start-up software for guided start-up for
MICROMASTER 410/420/
430/440 frequency inverters
under Windows 2000/XP
Professional. Parameter lists
can be read out, altered,
stored, entered and printed.
• DriveMonitor
is a start-up software for listoriented programming of
frequency inverters. This
program executes under
Windows 98/NT/2000/ME/
XP Professional.
Both programs are included
on the Docu DVD which is provided with every inverter.
2) A shielded cable of type
Belden 8132 (28 AWG) is
recommended. The maximum
cable length is 10 m for
RS-485.
Siemens DA 51.2 · 2007/2008
2/15
2
© Siemens AG 2007
MICROMASTER 420
Options
Variant independent options
■ Selection and ordering data
The options listed here are
suitable for all
MICROMASTER 420 inverters.
Options
Basic Operator Panel (BOP)
Advanced Operator Panel (AOP)
Asian Advanced Operator Panel (AAOP)
Cyrillic Advanced Operator Panel (CAOP)
PROFIBUS module
DeviceNet module
CANopen module
RS485/PROFIBUS bus connector
Connection kit for PC to inverter
Connection kit for PC to AOP
Operator panel door mounting kit for single inverter
AOP door mounting kit for multiple inverters (USS)
Start-up tool STARTER on DVD
2
Order No.
6SE6400-0BP00-0AA0
6SE6400-0AP00-0AA1
6SE6400-0AP00-0AB0
6SE6400-0AP00-0CA0
6SE6400-1PB00-0AA0
6SE6400-1DN00-0AA0
6SE6400-1CB00-0AA0
6GK1500-0FC00
6SE6400-1PC00-0AA0
6SE6400-0PA00-0AA0
6SE6400-0PM00-0AA0
6SE6400-0MD00-0AA0
6SL3072-0AA00-0AG0
Available on the Internet at:
http://support.automation.siemens.com/
WW/view/en/10804985/133100
■ Technical data of the communication modules
PROFIBUS module
6SE6400-1PB00-0AA0
Size (height x width x depth)
Degree of protection
Degree of pollution
Strain resistance
• Stationary
• Transport
Deflection
Acceleration
Deflection
Acceleration
Climatic category (during operation)
Cooling method
Permissible ambient or cooling agent temperature
• Operation
• Storage and transport
Relative humidity
(permissible humidity rating)
• Operation
• Storage and transport
Electromagnetic compatibility
Emission
Interference
Power supply
Output voltage
Data transmission rate
2/16
Siemens DA 51.2 · 2007/2008
DeviceNet module
6SE6400-1DN00-0AA0
161 mm x 73 mm x 46 mm
IP20
2 to IEC 60 664-1 (DIN VDE 0110/T1), no condensation permitted during operation
to DIN IEC 60 068-2-6 (if module is installed correctly)
0.15 mm in the frequency range of 10 Hz to 58 Hz
19.6 m/s2 in the frequency range of 58 Hz to 500 Hz
3.5 mm in the frequency range of 5 Hz to 9 Hz
9.8 m/s2 in the frequency range of 9 Hz to 500 Hz
3K3 to DIN IEC 60 721-3-3
Natural air cooling
–10 °C to +50 °C (+14 °F to +122 °F)
–25 °C to +70 °C (–13 °F to +158 °F)
£ 85 % (non-condensing)
£ 95 %
to EN 55 011 (1991) Class A
to IEC 60 801-3 and EN 61 000-4-3
6.5 V ± 5 %, max. 300 mA,
internal from inverter or
24 V ± 10 %, max. 350 mA, external
5 V ± 10 %, max. 100 mA,
galvanically isolated supply
• for terminating the serial interface bus or
• for supplying the OLP (Optical Link Plug)
max. 12 Mbaud
6.5 V ± 5 %, max. 300 mA
internal from inverter or
24 V, max. 60 mA from DeviceNet-Bus
–
125, 250 and 500 Kbaud
© Siemens AG 2007
MICROMASTER 420
Options
Variant independent options
■ Technical data of the communication modules (continued)
CANopen module
6SE6400-1CB00-0AA0
Size (height x width x depth)
Degree of protection
Degree of pollution
Strain resistance
• Stationary
• Transport
Deflection
Acceleration
Deflection
Acceleration
Climatic category (during operation)
Cooling method
Permissible ambient or cooling agent temperature
• Operation
• Storage
• Transport
Relative humidity
(permissible humidity rating)
• Operation
• Storage and transport
Power supply
Data transmission rate
161 mm x 73 mm x 46 mm
IP20
2 to IEC 60 664-1 (DIN VDE 0110/T1), no condensation permitted during operation
to IEC 60 068-2-6 (if module is installed correctly)
0.15 mm in the frequency range of 10 Hz to 58 Hz
19.6 m/s2 in the frequency range of 58 Hz to 500 Hz
3.5 mm in the frequency range of 5 Hz to 9 Hz
9.8 m/s2 in the frequency range of 9 Hz to 500 Hz
3K3 to DIN IEC 60 721-3-3
Natural air cooling
–10 °C to +50 °C (+14 °F to +122 °F)
–40 °C to +70 °C (–40 °F to +158 °F)
–25 °C to +70 °C (–13 °F to +158 °F)
£ 85 % (non-condensing)
£ 95 %
The CAN bus is supplied from the inverter power supply
10, 20, 50, 125, 250, 500, 800 Kbaud and 1 Mbaud
Documentation
■ Selection and ordering data
Type of documentation
Docu pack, supplied with each inverter,
containing DVD 1) and Getting Started Guide 2)
(paper version)
Operating instructions
(paper version)
Parameter list
(paper version)
1) The DVD contains operating
instructions, parameter list,
commissioning tools STARTER
and DriveMonitor, multilanguage.
Language
Multilanguage
Order No.
6SE6400-5AD00-1AP1
German, English, French, Italian, Spanish
Available as pdf file on the Internet at
http://support.automation.siemens.com/WW/view/en/10804926/133300
German, English, French, Italian, Spanish
Available as pdf file on the Internet at
http://support.automation.siemens.com/WW/view/en/10804926/133300
Available on the Internet:
DriveMonitor at
http://support.automation.
siemens.com/WW/view/en/
10804984/133100
STARTER at
http://support.automation.
siemens.com/WW/view/en/
10804985/133100
2) Available on the Internet at
http://support.automation.
siemens.com/WW/view/en/
10804926/133300
Siemens DA 51.2 · 2007/2008
2/17
2
© Siemens AG 2007
MICROMASTER 420
Dimension drawings
■ MICROMASTER 420 inverter
Frame size
A
B
C
1/3 AC 200 V to 240 V
0.12 kW to 0.75 kW
1.1 kW to 2.2 kW
3 kW to 5.5 kW
3 AC 380 V to 480 V
0.37 kW to 1.5 kW
2.2 kW to 4 kW
5.5 kW to 11 kW
Note:
The inverters must not be mounted horizontally.
But the inverters can be mounted without lateral spacing.
73
(2.87)
Inverter frame size A
ADA51-5007c
195 (7.68)
58
(2.28)
160 (6.29)
ADA51-5000e
Fixing with
2 x M4 bolts, 2 x M4 nuts, 2 x M4 washers,
or snap onto the DIN rail
Tightening torque with washers fitted:
2.5 Nm
Ventilation clearance required at top and
bottom: 100 mm
Inverter frame size A
with gland plate
ADA51-5008b
258 (10.16)
202 (7.95)
G_DA51_EN_05001d
174 (6.85)
Drill pattern
149 (5.87)
(6 172
.7
7)
138 (5.43)
Fixing with
4 x M4 bolts, 4 x M4 nuts, 4 x M4 washers
Tightening torque with washers fitted:
2.5 Nm
Ventilation clearance required at top and
bottom: 100 mm
Inverter frame size B
Inverter frame size B
with gland plate
309 (12.16)
ADA51-5002d
ADA51-5009b
204 (8.03)
Drill pattern
245 (9.65)
174 (6.85)
(7 195
.6
8)
2
DIN Rail
(5 149
.8
7)
147 (5.79)
173 (6.81)
Drill and fixing pattern
185 (7.28)
Inverter frame size C
With the communications module, the mounting depth
increases by 23 mm (0.91 inches).
2/18
Siemens DA 51.2 · 2007/2008
Fixing with
4 x M5 bolts, 4 x M5 nuts, 4 x M5 washers
Tightening torque with washers fitted:
3.0 Nm
Ventilation clearance required at top
and bottom: 100 mm
Inverter frame size C
with gland plate
All dimensions in mm (values in brackets are in inches)
© Siemens AG 2007
MICROMASTER 420
Dimension drawings
■ Filters and chokes
73
56
149 (5.87)
120 (4.72)
24
(0.94)
(2.87)
(2.2)
185 (7.28)
156 (6.14)
38
(1.5)
43.5 (1.71)
c
G_DA51_EN_00063
245 (9.65)
204 (8.03)
50.5 (1.99)
138
(5.43)
Filter frame size A
187 (7.36)
200 (7.87)
G_DA51_EN_00062
213 (8.39)
174 (6.85)
174 (6.85)
187 (7.36)
G_DA51_EN_00061
200 (7.87)
160 (6.3)
2 x M4
For frame size C
c
Frame size A
d
e
G_DA51_XX_00064
a
a
DA51-5013e
Line
commutating
choke for
Line commutating choke
for frame size A
Frame size B
Frame size C
Dimensions
a
200
(7.87)
213
(8.39)
245
(9.65)
b
75.5
(2.97)
150
(5.91)
185
(7.28)
c
G_DA51_XX_05050a
a
DA51-5049
d
–
e
–
220
(8.66)
264
(10.39)
233
2.2
(9.17)
280
5.1
(11.02)
b
Output choke
type 6SE6400-
a
c
50
(1.97)
50
(1.97)
50
(1.97)
Weight
(max.)
kg
1.4
For frame sizes B and C
b
3TC00-4AD2
3TC00-4AD3
3TC01-0BD3
3TC03-2CD3
Output choke
for frame size A
6SE6400-3TC00-4AD2
6SE6400-3TC00-4AD3
2
b
c
b
55 (2.17)
174
(6.85)
For frame size B
219 (8.62)
232 (9.13)
4 x M4
4 x M4
Dimensions
a
200
(7.87)
200
(7.87)
213
(8.39)
245
(9.65)
b
75.5
(2.97)
75.5
(2.97)
150
(5.91)
185
(7.28)
Weight
(max.)
kg
1.9
c
110
(4.33)
50
1.3
(1.97)
80
4.1
(3.15)
80
6.6
(3.15)
For frame sizes B and C
6SE6400-3TC01-0BD3
6SE6400-3TC03-2CD3
All dimensions in mm (values in brackets are in inches)
Siemens DA 51.2 · 2007/2008
2/19
© Siemens AG 2007
MICROMASTER 420
Dimension drawings
■ LC filter
100
(3.9)
120
(4.72)
G_DA51_EN_05080
G_DA51_EN_05079
G_DA51_EN_05076
334 (13.15)
300 (11.81)
56
(2.2)
Drill pattern
138
(5.43)
340 (13.38)
293 (11.53)
56
(2.2)
150 (5.9)
280 (11.02)
Drill pattern
G_DA51_EN_05077
75.5
(2.97)
287 (11.3)
110
(4.3)
Fixing with M4 bolts
Fixing with M4 bolts
2
LC filter for frame size A
140
(5.51)
LC filter for frame size B
185 (7.28)
Drill pattern
156 (6.14)
G_DA51_EN_05081
G_DA51_EN_05078a
382 (15.04)
335 (13.19)
320 (12.6)
174 (6.85)
Fixing with M5 bolts
LC filter for frame size C
All dimensions in mm (values in brackets are in inches)
2/20
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
Inverter
MICROMASTER 430
3/2
Description
3/4
Circuit diagrams
3/6
Technical data
3/9
Selection and ordering data
3/10
Options
3/19
Dimension drawings
3
Siemens DA 51.2 · 2007/2008
3/1
© Siemens AG 2007
MICROMASTER 430
Description
■ Application
3
The MICROMASTER 430 inverter is suitable for a variety
of variable-speed drive applications. Its flexibility provides
for a wide spectrum of applications. It is especially suitable for use with industrial
pumps and fans. The inverter
is especially characterized by
its customer-oriented performance and ease-of-use. It has
more inputs and outputs than
the MICROMASTER 420, an
optimized operator panel with
manual/automatic switchover
and adapted software functionality.
■ Main characteristics
The MICROMASTER 430 inverter has a modular design.
The operator panels and communication modules can be
easily exchanged.
■ The MICROMASTER 430
■ Modular construction al-
■ Output chokes
inverter complies with the
requirements of the EU lowvoltage guideline
■ The MICROMASTER 430
inverter has the > marking
■ acc. to u and cu certified
✔
■ c-tick ●
■
■
■
■
■
■
■
■
■
3/2
■ International standards
■ Line commutating chokes
■
■ Design
■ Options (overview)
■ Easy, guided start-up
lows maximum configuration flexibility
Six programmable isolated
digital inputs
Two scaleable analog inputs (0 V to 10 V, 0 mA to
20 mA) can also be used as
a 7th/8th digital input
Two programmable analog
outputs (0 mA to 20 mA)
Three programmable relay
outputs (30 V DC/5 A resistive load; 250 V AC/2A inductive load)
Low-noise motor operation
thanks to high pulse frequencies, adjustable (observe derating if necessary)
Complete protection for
motor and inverter
Control of up to three additional drives on the basis of
PID control (motor staging)
Operation of drive directly
on mains (with external bypass circuit)
Low-energy mode
Detects dry run of pumps
(belt failure detection).
Siemens DA 51.2 · 2007/2008
■ LC filter and sinusoidal filter
■ Gland plates
■ Basic Operator Panel 2
■
■
■
■
■
(BOP-2) for parameterizing
the inverter
Communication modules
– PROFIBUS
– DeviceNet
– CANopen
PC connection kits
Mounting kits for installing
the operator panels in the
control cabinet doors
PC start-up tools executable under Windows 98
and NT/2000/ME/
XP Professional.
TIA integration with
Drive ES
Note:
See Appendix for standards.
© Siemens AG 2007
MICROMASTER 430
Description
■ Mechanical features
■ Performance features
■ Modular design
■ Latest IGBT technology
■ Operating temperature
■ Digital microprocessor
■
■
■
■
–10 °C to +40 °C
(+14 °F to +104 °F)
Compact housing as a result of high power density
Easy cable connection,
mains and motor connections are separated for optimum electromagnetic compatibility
Detachable operator
panels
Screwless control terminal
strip on detachable I/O
board.
■
■
■
■
■
■
■
■
■
■
■
control
Flux Current Control (FCC)
for improved dynamic response and optimized motor control
Linear V/f characteristic
Quadratic V/f characteristic
Multipoint characteristic
(programmable V/f characteristic)
Flying restart
Slip compensation
Automatic restart following
mains failure or fault
Energy saving mode (stopping e.g. of a pump at low
speeds)
Motor staging (connection
and disconnection of additional motors, use of inverter as control drive in a
pump cascade)
Manual/automatic mode
Load torque monitoring
(belt failure detection;
detects dry run of pumps)
■ Protection features
■ High-grade internal PID
■
■
■
■
■
■
■
■
controller for simple process control
Programmable acceleration/deceleration times
from 0 s to 650 s
Ramp smoothing
Fast Current Limit (FCL) for
trip-free operation
Fast, repeatable digital input response time
Fine adjustment using two
high-resolution 10-bit analog inputs
Compound braking for controlled rapid braking
Four skip frequencies
Removable “Y” capacitor for
use on IT systems (with
non-grounded mains supplies, the “Y” capacitor
must be removed and an
output choke installed).
■ Overload capability
■
■
■
■
■
■
■
■
■
7.5 kW to 90 kW:
Overload current 1.4 x rated output current (i.e.
+140 % overload capability) for 3 s, and 1.1 x rated
output current (i.e. 110 %
overload capability) for
60 s, cycle time 300 s
110 kW to 250 kW:
Overload current 1.5 x rated output current (i.e.
150 % overload capability)
for 1 s, and 1.1 x rated output current (i.e. 110 % overload capability) for 59 s,
cycle time 300 s
Overvoltage/undervoltage
protection
Inverter overtemperature
protection
Special direct connection
for PTC or KTY to protect
the motor
Earth fault protection
Short-circuit protection
I2t motor thermal protection
Locked motor protection
Stall prevention
Parameter interlock
3
Siemens DA 51.2 · 2007/2008
3/3
© Siemens AG 2007
MICROMASTER 430
Circuit diagrams
■ General circuit diagram
PE
3 AC 380 - 480 V
SI
2
≥ 4,7 k Ω
3
0V
ADC1+
ADC1-
AA/
DD
BOP link
4
ADC2+
10
DIN1
5
5
6
6
7
7
8
8
DIN2
~
~
Opto isolation
DIN2
DIN3
DIN3
DIN4
DIN4
DIN5
DIN5
16
16
17
17
==
Frame sizes
C to F
B+/DC+
DC-
DIN6
PNP
or
NPN
Output +24 V
max. 100 mA
(isolated)
Output 0 V
max. 100 mA
(isolated)
9
28
28
14
DCPA
A
PTCB
D
15
DCNS
CPU
DCPS
DAC1+
0 - 20 mA
max. 500
12
D
DAC1-
A
=
13
DAC2+
0 - 20 mA
max. 500
26
Terminals only
for measuring
purposes
DCNA
Frame sizes
FX and GX
PTCA
Motor
PTC/
KTY 84
3
150.00
BOP-2
DIN1
DIN6
ADC2-
RS232
AA/
DD
11
24 V external
+
_ 24 V
L/L1, N/L2,
L3
or
L1, L2, L3
PE
+ 10 V
1
3
D
DAC2-
~
A
27
COM
20 NO
Not
used
50 Hz
1 2
DIP switch
(on control board)
19 NC
18
30 V DC/5 A (resistive load)
250 V AC/2 A (inductive load)
Relay 2
COM
22 NO
21
0 - 20 mA
current
0 - 10 V
voltage
COM
Relay 3
60 Hz
25 NO
24 NC
23
P+
29
RS485
N30
ADC ADC
1 2
DIP
switch
(on I/O
board)
1 2
COM link
PE
CB
option
3/4
Siemens DA 51.2 · 2007/2008
automatic
U, V, W
M
G_DA51_EN _00012
Relay 1
© Siemens AG 2007
MICROMASTER 430
Circuit diagrams
■ Terminal connection diagram
Example, frame size C
View A
Mains connections
Motor connections
AIN1 AIN2
S1
RL1-A
RL1-B
RL1-C
RL2-B
RL2-C
RL3-A
RL3-B
RL3-C
18
19
20
21
22
23
24
25
S2
DIP Switches:
0 mA to 20 mA
or
0 V to 10 V
DAC1+ DAC1-
12
G_DA51_EN_05107
View A
Output relay contacts
3
PTC
A
PTC
B
DIN5
DIN6
DAC2+
DAC2-
PE
0V
P+
N-
14
18
15
16
17
26
27
28
29
30
13
NPN *)
Analog output 1
+10 V
0V
Digital inputs
ADC1+
ADC1-
DIN1
DIN2
Analog output 2
DIN3
DIN4
RS-485
(USS-protocol)
+24 V
ADC2+
1
2
3
ADC2-
(DIN8)
(DIN7)
4
5
6
7
8
9
10
11
PNP *)
Voltage
supply 10 V
Analog input 1
Digital inputs
Analog input 2
*) PNP or NPN possible
Siemens DA 51.2 · 2007/2008
3/5
© Siemens AG 2007
MICROMASTER 430
Technical data
■ MICROMASTER 430 inverter
Mains voltage and Power ranges
Power frequency
Output frequency
7.5 kW to 90 kW
110 kW to 250 kW
Power factor
Inverter efficiency
7.5 kW to 90 kW
110 kW to 250 kW
Overload capability
7.5 kW to 90 kW
110 kW to 250 kW
Inrush current
Control method
Pulse frequency
7.5 kW to 90 kW
110 kW to 250 kW
Fixed frequencies
Skip frequency ranges
Setpoint resolution
Digital inputs
Analog inputs
Relay outputs
Analog outputs
Serial interfaces
Motor cable length
3
7.5 kW to 90 kW
without output choke
with output choke
110 kW to 250 kW
without output choke
with output choke
Electromagnetic compatibility
7.5 kW to 90 kW
For inverters without filter
7.5 kW to 15 kW
18.5 kW to 90 kW
110 kW to 250 kW
Braking
Degree of protection
Operating temperature range
7.5 kW to 90 kW
110 kW to 250 kW
Storage temperature
Relative humidity
Installation altitude
7.5 kW to 90 kW
110 kW to 250 kW
Standard SCCR
(Short Circuit Current Rating) 1)
Protection features for
Conformity with standards
7.5 kW to 90 kW
110 kW to 250 kW
> marking
Cooling-air volumetric flow required,
dimensions and weights
(without options)
1) For footnote, see page 3/7.
3/6
3 AC 380 V to 480 V ± 10 %
47 Hz to 63 Hz
0 Hz to 650 Hz
0 Hz to 267 Hz
³ 0.95
7.5 kW to 250 kW (variable torque)
96 % to 97 %
97 % to 98 % (Further information is available on the Internet at:
http://support.automation.siemens.com/WW/view/en/22978972)
Overload current 1.4 x rated output current (i.e. +140 % overload capability) for 3 s, and
1.1 x rated output current (i.e. 110 % overload capability) for 60 s, cycle time 300 s
Overload current 1.5 x rated output current (i.e. 150 % overload capability) for 1 s and
1.1 x rated output current (i.e. 110 % overload capability) for 60 s, cycle time 300 s
Less than rated input current
Linear V/f characteristic; quadratic V/f characteristic; multipoint characteristic
(programmable V/f characteristic); flux current control (FCC), energy saving mode
4 kHz (standard)
2 kHz to 16 kHz (in 2 kHz steps)
2 kHz (standard)
2 kHz to 4 kHz (in 2 kHz steps)
15, programmable
4, programmable
0.01 Hz digital; 0.01 Hz serial; 10 bit analog
6 fully programmable isolated digital inputs; switchable PNP/NPN
2 programmable analog inputs
• 0 V to 10 V, 0 mA to 20 mA and –10 V to +10 V (AIN1)
• 0 V to 10 V and 0 mA to 20 mA (AIN2)
• both can be used as 7th/8th digital input
3, programmable, 30 V DC/5 A (resistive load); 250 V AC/2A (inductive load)
2, programmable (0/4 mA to 20 mA)
RS-485, optional RS-232
max. 50 m (shielded); max. 100 m (unshielded)
see variant dependent options
max. 200 m (shielded); max. 300 m (unshielded)
see variant dependent options
Inverter with internal filter Class A available
EMC filter, Class B to EN 55 011 available as an option
EMC filter, Class B from Schaffner available as an option
EMC filter, Class A available as an option
DC braking, compound braking
IP20
–10 °C to +40 °C (+14 °F to +104 °F)
0 °C to +40 °C (+32 °F to +104 °F)
–40 °C to +70 °C (–40 °F to +158 °F)
95 % (non-condensing)
Up to 1000 m above sea level without derating
Up to 2000 m above sea level without derating
FSC: 10 kA
FSD, FSE, FSF, FSFX, FSGX: 42 kA
undervoltage, overvoltage, overload, earth faults, short-circuits, stall prevention, locked motor protection,
motor overtemperature, inverter overtemperature, parameter change protection
✔
u, cu, >, c-tick ●
u available soon, cu available soon, >
Conformity with low-voltage directive 73/23/EEC
Frame size (FS)
Cooling-air volumetric
flow required (l/s)/(CFM)
C
54.9/116.3
D
2 x 54.9/2 x 116.3
E
2 x 54.9/2 x 116.3
F without filter
150/317.79
F with filter
150/317.79
FX
225/478.13
GX
440/935
CFM: Cubic Feet per Minute
Siemens DA 51.2 · 2007/2008
H
xW
245 x 185
520 x 275
650 x 275
850 x 350
1150 x 350
1400 x 326
1533 x 326
x D (mm)
Weight, approx. (kg)
x 195
x 245
x 245
x 320
x 320
x 356
x 545
5.7
17
22
56
75
116
174
© Siemens AG 2007
MICROMASTER 430
Technical data
■ Derating data
Pulse frequency
Output
(for 3 AC 400 V)
Rated output current in A
for a pulse frequency of
kW
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
110
132
160
200
250
2 kHz
19.0
26.0
32.0
38.0
45.0
62.0
75.0
90.0
110.0
145.0
178.0
205.0
250.0
302.0
370.0
477.0
4 kHz
19.0
26.0
32.0
38.0
45.0
62.0
75.0
90.0
110.0
145.0
178.0
180.4
220.0
265.8
325.6
419.8
6 kHz
17.1
24.7
28.8
36.1
40.5
55.8
71.3
81.0
93.5
123.3
138.0
–
–
–
–
–
8 kHz
15.2
23.4
25.6
34.2
36.0
49.6
67.5
72.0
77.0
101.5
97.9
–
–
–
–
–
10 kHz
13.3
20.8
22.4
30.4
31.5
43.4
60.0
63.0
63.3
83.4
84.6
–
–
–
–
–
12 kHz
11.4
18.2
19.2
26.6
27.0
37.2
52.5
54.0
49.5
65.3
71.2
–
–
–
–
–
14 kHz
9.5
15.6
16.0
22.8
22.5
31.0
45.0
45.0
41.3
54.4
62.3
–
–
–
–
–
16 kHz
7.6
13.0
12.8
19.0
18.0
24.8
37.5
36.0
33.0
43.5
53.4
–
–
–
–
–
Operating temperature
Inverter 7.5 kW to 90 kW
Inverter 110 kW to 250 kW
A D A 5 1 -5 0 4 7 a
100
%
80
70
60
R a te d o u tp u t c u rre n t
Rated output current
G_DA51_EN_05045a
40
4 0
3
2 0
20
0
-10
1 0 0
8 5
8 0
%
6 0
0
10
20
30
40 °C 50
Operating temperature
1) Applies to industrial control
cabinet installations to NEC
article 409/UL 508A.
For further information, visit us
on the Internet at:
0
0
1 0
2 0
5 5
3 0
4 0 4 5 °C
O p e r a tin g te m p e r a tu r e
http://support.automation.
siemens.com/WW/view/en/
23995621
Siemens DA 51.2 · 2007/2008
3/7
© Siemens AG 2007
MICROMASTER 430
Technical data
■ Derating data (continued)
Installation altitude above sea level
Permissible output current
in % of the rated output current
Inverter 7.5 kW to 90 kW
Inverter 110 kW to 250 kW
ADA51-5046
ADA51-5018c
100
85
80
%
60
Rated output current
Rated output current
100
%
80
60
40
20
20
0
40
0
1000
2000
0
3000 m 4000
Operational altitude
Permissible mains voltage
in % of the max. possible mains voltage
Inverter 7.5 kW to 90 kW
3000 m 4000
Operational altitude
100
%
80
77
Mains voltage
Mains voltage
2000
ADA51-5019b
100
%
80
77
60
60
40
40
20
20
0
1000
2000
3000 m 4000
Operational altitude
3
3/8
1000
Inverter 110 kW to 250 kW
ADA51-5019b
0
0
Siemens DA 51.2 · 2007/2008
0
0
1000
2000
3000 m 4000
Operational altitude
© Siemens AG 2007
MICROMASTER 430
Selection and ordering data
■ MICROMASTER 430 inverter
Output
kW
Rated input
current
hp
A
Rated output
current
A
Frame size
Order No.
MICROMASTER 430
without filter 4)
MICROMASTER 430
with internal filter
Class A 3)
6SE6430-2UD27-5CA0
6SE6430-2UD31-1CA0
6SE6430-2UD31-5CA0
6SE6430-2UD31-8DA0
6SE6430-2UD32-2DA0
6SE6430-2UD33-0DA0
6SE6430-2UD33-7EA0
6SE6430-2UD34-5EA0
6SE6430-2UD35-5FA0
6SE6430-2UD37-5FA0
6SE6430-2UD38-8FA0
6SE6430-2UD41-1FA0
6SE6430-2UD41-3FA0
6SE6430-2UD41-6GA0
6SE6430-2UD42-0GA0
6SE6430-2UD42-5GA0
6SE6430-2AD27-5CA0
6SE6430-2AD31-1CA0
6SE6430-2AD31-5CA0
6SE6430-2AD31-8DA0
6SE6430-2AD32-2DA0
6SE6430-2AD33-0DA0
6SE6430-2AD33-7EA0
6SE6430-2AD34-5EA0
6SE6430-2AD35-5FA0
6SE6430-2AD37-5FA0
6SE6430-2AD38-8FA0
–
–
–
–
–
(FS)
Mains operating voltage 3 AC 380 V to 480 V
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
110
132
160
200
250
10
15
20
25
30
40
50
60
75
100
120
150
200
250
300
350
17.3 1)
23.1 1)
33.8 1)
37.0 1)
43.0 1)
59.0 1)
72.0 1)
87.0 1)
104.0 1)
139.0 1)
169.0 1)
200.0 2)
245.0 2)
297.0 2)
354.0 2)
442.0 2)
19
26
32
38
45
62
75
90
110
145
178
205
250
302
370
477
C
C
C
D
D
D
E
E
F
F
F
FX
FX
GX
GX
GX
See Appendix for note on ordering.
All MICROMASTER 430 inverters are supplied with a Status
Display Panel (SDP). A BOP-2
or other options have to be
ordered separately (see
Pages 3/14 to 3/16).
■ Motors for
MICROMASTER 430
Catalog D 81.1 contains selection and ordering data for
motors which are particularly
suitable for operation with the
MICROMASTER 430 inverters
(see Appendix for overview).
3
This catalog is suitable for IEC
motors. For motors according
to US standards (NEMA)
please refer to Catalog D 81.2
U.S./Canada (see Appendix
for overview) and to:
http://www.sea.siemens.com/
motors
1) Supplementary conditions:
Input current at rated operating
point, applicable at short-circuit voltage of the supply
USC = 2 % with reference to the
inverter rated power and rated
mains operating voltage of
400 V without a line commutating choke.
2) Supplementary conditions:
Input current at rated operating
point, applicable at short-circuit voltage of the supply
USC ⱖ 2.33 % with reference to
the inverter rated power and
rated mains voltage of 400 V.
3) Use of MICROMASTER inverters with internal filter is not permissible on non-grounded
mains supplies.
4) Acc. to EMC EN 61800-3 generally suited to heavy industrial
applications. For details please
refer to Appendix on page A/4.
Siemens DA 51.2 · 2007/2008
3/9
© Siemens AG 2007
MICROMASTER 430
Options
Variant dependent options
■ Overview
EMC filter, Class A
All 7.5 kW to 90 kW inverters
are supplied with an internal
filter Class A.
For inverters 110 kW to
250 kW, EMC filters Class A
are available. In this performance range, the EMC filters
are only permitted to be used
in combination with a line
commutating choke.
The requirements are fulfilled
using shielded cables with a
max. length of 25 m.
EMC filter, Class B
Available for inverters 7.5 kW
to 15 kW with an internal Class
A EMC filter.
The requirements are fulfilled
using shielded cables with a
max. length of 25 m.
For inverters 18.5 kW to 90 kW
without filters, EMC filters of
Class B from Schaffner can be
used.
3
The requirements are fulfilled
using shielded cables with a
max. length of 25 m to 50 m
(depending on the type, details on request).
With this filter, the inverter
complies with the emission
standard EN 55 011, Class B
for conducted interference
emissions.
Leakage currents:
The leakage currents of the inverters with/without filter (internal/external) may exceed
30 mA. Typical values in practice are between 10 mA and
50 mA. The exact values depend on the design, environment and cable lengths. Interference-free operation with
residual current operated devices with a trigger value of
30 mA cannot be guaranteed.
However, operation with residual current operated devices
with a trigger value of 300 mA
is possible. Please refer to the
Instruction Manual for details.
■ Technical data
LC filter and sinusoidal filter
Mains voltage
Current (at 40 °C/50 °C)
For frame size C (7.5 to 15 kW)
For frame size D (18.5 kW)
For frame size D (22 kW)
For frame size D (30 kW)
For frame size E (37 kW)
For frame size E (45 kW)
For frame size F (55 kW)
For frame size F (75 kW)
For frame size F (90 kW)
Current (at 40 °C/55 °C)
For frame size FX (110 kW and 132 kW)
For frame size GX (160 kW)
For frame size GX (200 kW)
For frame size GX (250 kW)
Limiting of motor overvoltage
dV/dt limiting
Pulse frequency
Max. motor frequency
3/10
Siemens DA 51.2 · 2007/2008
3 AC 380 V to 480 V
32.6 A/ 26 A
38.8 A/ 32 A
45.9 A/ 38 A
63.2 A/ 45 A
76.5 A/ 62 A
112.2 A/ 90 A
112.2 A/ 90 A
147.9 A/110 A
181.6 A/145 A
225 A/191 A
276 A/235 A
333 A/283 A
408 A/347 A
£ 1078 V
£ 500 V/ms
4 kHz
150 Hz
LC filter and sinusoidal filter
The LC filter/sinusoidal filter
limits the rate of rise of voltage
and the capacitive charge/
discharge currents which usually occur with inverter operation. This means that much
longer shielded motor cables
are possible when using LC
filters/sinusoidal filters and the
service life of the motor
achieves values similar to
those with direct mains operation. Use of an output choke
isn’t required with that.
Please note when using
LC filters/sinusoidal filters:
• Only V/f, FCC control permissible
• Please observe the derating
of 15 % when selecting the
appropriate inverter
• Operation only permissible
with 4 kHz pulse frequency
Note: Please observe derating for frame sizes FX and
GX.
• The output frequency is limited to 150 Hz
• Operation and commissioning only with connected motor as the LC filter/sinusoidal
filter is not idling-proof!
The LC filters/sinusoidal filters
can be used for all MICROMASTER 430 inverters of
frame sizes C to GX.
• Frame sizes D to F:
The LC filters, frame sizes D
to F, are designed for
mounting upright in the control cabinet. Due to leakage
flux lines caused by physical
sources, a minimum distance of 50 mm to adjacent
modules and metal parts is
recommended.
• Frame sizes FX and GX:
The sinusoidal filters, frame
sizes FX and GX, are designed for mounting upright
in the control cabinet. Due to
leakage flux lines caused by
physical sources, a minimum distance of 100 mm to
adjacent modules and metal
parts is recommended.
© Siemens AG 2007
MICROMASTER 430
Options
Variant dependent options
■ Technical data (continued)
LC filter and sinusoidal filter
Max. permissible motor cable lengths
For frame sizes C to F
For frame sizes FX and GX
shielded
unshielded
shielded
unshielded
Insulation strength
Electromagnetic compatibility
For frame sizes C to F
Up to 200 m motor cable length with emissions to Class A according to EN 55 011
in conjunction with filtered inverters and unshielded cables
Up to 150 m motor cable length with emissions to Class A according to EN 55 011
in conjunction with filtered inverters and unshielded cables
CE according to the low-voltage directive 73/23/EEC
cUL E 219022
EN 60 068-2-31
95 % humidity, non-condensing
For frame sizes FX and GX
Conformity
Approvals
Strain resistance
Humidity
Degree of protection
For frame size C
For frame sizes D to F
For frame sizes FX and GX
Insulation class
Temperature range
For frame sizes C to F
For frame sizes FX and GX
IP20 (to EN 60 529)
IP00/IP20 (to EN 60 529 with terminal covers)
IP00
H (180 °C)
Operation –10 °C to +40 °C (+14 °F to +104 °F)
to +50 °C (to +122 °F)
Storage –25 °C to +70 °C (–13 °F to +158 °F)
Operation –10 °C to +40 °C (+14 °F to +104 °F)
to +55 °C (to +131 °F)
Storage –40 °C to +70 °C (–40 °F to +158 °F)
Installation altitude
For frame size C
Up to 2000 m:
2000 to 4000 m:
Up to 1000 m:
1000 to 4000 m:
Up to 2000 m:
2000 to 4000 m:
For frame sizes D to F
For frame sizes FX and GX
Mounting position
For frame size C
For frame sizes D to F, FX and GX
Free space
For frame size C
For frame sizes D to F,
FX and GX
Connection system
For frame sizes FX and GX
Weight, approx.
For frame size C
For frame size D
For frame size E
For frame size F
For frame size FX
For frame size GX
100 % Pn
80 % Pn
100 % Pn
85 % Pn
100 % Pn
62.5 % Pn
100 % Pn
12.5 % derating for each 1000 m
100 % Pn
7.5 % derating for each 1000 m
Footprint or suspended
upright
3
Top 100 mm
Bottom 100 mm
Side 100 mm
Top
Side
Input, litz wire or terminal
Output, terminals
Torque for
conductor connections
For frame size C
For frame sizes D to F
200 m
300 m
300 m
450 m
Overvoltage category III to VDE 0110
100 mm
100 mm
1U1, 1V1, 1W1
1U2, 1V2, 1W2
Terminal cross-section Torque
–
16 mm2
35 mm2
50 mm2
95 mm2
150 mm2
–
8.5 kg
21 kg
49.5 kg
67 kg
135 kg
138 kg
1.5 Nm to 1.8 Nm
2.0 Nm to 4.0 Nm
2.5 Nm to 5.0 Nm
3.0 Nm to 6.0 Nm
6.0 Nm to 12.0 Nm
10.0 Nm to 20.0 Nm
14.0 Nm to 31.0 Nm
to
to
to
to
29 kg
34 kg
67 kg
77.5 kg
to 208 kg
Siemens DA 51.2 · 2007/2008
3/11
© Siemens AG 2007
MICROMASTER 430
Options
Variant dependent options
■ Overview
Line commutating choke
Line commutating chokes are
used to smooth voltage peaks
or to bridge commutating
dips.
In addition, line commutating
chokes reduce the effects of
harmonics on the inverter and
the power supply. If the line
impedance is < 1 %, a line
commutating choke must be
used in order to reduce the
current peaks.
No limits are currently defined
in the EN 61 000-3-2 standard
for professionally used devices with a connected load
> 1 kW.
This means that the inverters
with an output power
³ 0.75 kW comply with the
EN 61 000-3-2 standard.
However, in accordance with
the regulations of EN 61000-312 “Limits for harmonic currents > 16 A and £ 75 A per
phase” an approval is necessary from the power supplier
for drives that are intended to
be connected to the public
low-voltage network. Please
refer to the Operating Instructions for the values of the harmonic currents.
Output choke
Gland plate
Output chokes can be supplied for reducing the capacitive compensation currents
and dV/dt in the case of motor
cables >50 m (shielded) or
> 100 m (unshielded).
Gland plates are available for
inverters of frame size C. All
the other frame sizes have the
shield connection for the control cable integrated in the inverter.
For max. permissible cable
lengths, see Technical Data.
The shield for the power cable
has to be connected externally (e.g. in the control cabinet).
Exception: Inverters of frame
sizes D and E and frame size
F with integrated class A filter.
In this case the shield connection is integrated in the inverter.
The gland plate facilitates the
shield connection of power
and control cables and thus
ensures optimum EMC performance.
■ Technical data
Max. permissible cable
lengths from the motor to
the inverter when using output chokes
3
Note:
Operation up to 150 Hz output
frequency only!
The following table shows the
maximum permissible cable
lengths from the motor to the
inverter when using output
chokes.
Frame size
Output choke
(FS)
C
D to F
FX
FX
GX
GX
GX
Type
6SE6400-3TC03-2CD3
6SE6400-3TC . . -. . D0
6SL3000-2BE32-1AA0
6SL3000-2BE32-6AA0
6SL3000-2BE33-2AA0
6SL3000-2BE33-8AA0
6SL3000-2BE35-0AA0
3/12
Siemens DA 51.2 · 2007/2008
Max. permissible motor cable lengths (shielded/unshielded)
for a mains voltage of
380 V to 400 V ± 10 %
401 V to 480 V ± 10 %
200 m/300 m
100 m/150 m
200 m/300 m
200 m/300 m
300 m/450 m
300 m/450 m
300 m/450 m
300 m/450 m
300 m/450 m
300 m/450 m
300 m/450 m
300 m/450 m
300 m/450 m
300 m/450 m
© Siemens AG 2007
MICROMASTER 430
Options
Variant dependent options
■ Design
■ A maximum of two footprint
■ The EMC filter must be
components plus inverter
are permissible.
■ If an LC filter is used, it must
be mounted directly on the
wall of the control cabinet
due to weight reasons.
If an LC filter of frame size C
is used, therefore, only one
footprint component is permissible. If a line choke and
LC filter are used, the line
choke must be located on
the left of the inverter.
Required distance between
line choke and inverter:
75 mm.
mounted directly below the
frequency inverter if possible.
■ If mounted on the side, the
line-side components are to
be mounted to the left of the
frequency inverter whereas
the output-side components are to be mounted to
the right of the frequency
inverter.
G_DA51_EN_05042c
General installation instructions
Position 2
Position 1
Example of installation with frequency inverter,
EMC filter (position 1) and line choke (position 2)
Availability of the options as footprint components
Line commutating choke
EMC filter
LC filter
Output choke
Frame size
C
✓
✓
✓
✓
D
✓
E
✓
F
G
FX
GX
3
Recommended combinations of inverters and options
Frequency inverter
Frame size
Footprint
Position 1
Position 2
Mounted on side
To the left of the inverter
(for line-side components)
C
EMC filter
EMC filter or
Line commutating choke
LC filter
Line commutating choke
Output choke
–
–
–
D and E
Line commutating choke
–
EMC filter and/or
Line commutating choke
EMC filter
F, G, FX and GX
–
–
EMC filter and/or
Line commutating choke
To the right of the inverter
(for output-side components)
Output choke
–
–
Output choke or
LC filter
Output choke or
LC filter
Siemens DA 51.2 · 2007/2008
3/13
© Siemens AG 2007
MICROMASTER 430
Options
Variant dependent options
■ Selection and ordering data
The options listed here (filters,
chokes, gland plates, fuses
and circuit-breakers) must be
selected to match the inverter.
Mains voltage
3 AC 380 V to 480 V
*) Must be used in combination with a line
commutating choke.
Mains voltage
3 AC 380 V to 480 V
3
Mains voltage
3 AC 380 V to 480 V
3/14
The inverter and the associated options have the same voltage ratings. Alternatively fuses and circuit-breakers can be
provided. Both provide short
circuit protection of the inverter supply line and the inverter.
A semiconductor protection of
Output
hp
kW
Inverter
without filter
Order No. of the options
EMC filter, Class A
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
110
132
160
200
250
10
15
20
25
30
40
50
60
75
100
120
150
200
250
300
350
6SE6430-2UD27-5CA0
6SE6430-2UD31-1CA0
6SE6430-2UD31-5CA0
6SE6430-2UD31-8DA0
6SE6430-2UD32-2DA0
6SE6430-2UD33-0DA0
6SE6430-2UD33-7EA0
6SE6430-2UD34-5EA0
6SE6430-2UD35-5FA0
6SE6430-2UD37-5FA0
6SE6430-2UD38-8FA0
6SE6430-2UD41-1FA0
6SE6430-2UD41-3FA0
6SE6430-2UD41-6GA0
6SE6430-2UD42-0GA0
6SE6430-2UD42-5GA0
–
–
–
–
–
–
–
–
–
–
–
6SL3000-0BE32-5AA0 *)
6SL3000-0BE34-4AA0 *)
Output
kW
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
110
132
160
200
250
hp
10
15
20
25
30
40
50
60
75
100
120
150
200
250
300
350
Inverter
without filter
Order No. of the options
LC/sinusoidal filter
6SE6400-3TD03-2CD0
Output
kW
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
110
132
160
200
250
6SE6430-2UD27-5CA0
6SE6430-2UD31-1CA0
6SE6430-2UD31-5CA0
6SE6430-2UD31-8DA0
6SE6430-2UD32-2DA0
6SE6430-2UD33-0DA0
6SE6430-2UD33-7EA0
6SE6430-2UD34-5EA0
6SE6430-2UD35-5FA0
6SE6430-2UD37-5FA0
6SE6430-2UD38-8FA0
6SE6430-2UD41-1FA0
6SE6430-2UD41-3FA0
6SE6430-2UD41-6GA0
6SE6430-2UD42-0GA0
6SE6430-2UD42-5GA0
Inverter
without filter
hp
10
15
20
25
30
40
50
60
75
100
120
150
200
250
300
350
6SE6430-2UD27-5CA0
6SE6430-2UD31-1CA0
6SE6430-2UD31-5CA0
6SE6430-2UD31-8DA0
6SE6430-2UD32-2DA0
6SE6430-2UD33-0DA0
6SE6430-2UD33-7EA0
6SE6430-2UD34-5EA0
6SE6430-2UD35-5FA0
6SE6430-2UD37-5FA0
6SE6430-2UD38-8FA0
6SE6430-2UD41-1FA0
6SE6430-2UD41-3FA0
6SE6430-2UD41-6GA0
6SE6430-2UD42-0GA0
6SE6430-2UD42-5GA0
Siemens DA 51.2 · 2007/2008
the inverter with the suggested 3NA... fuses and the 3RV.../
3VL... circuit-breakers is not
envisaged.
EMC filter, Class B
–
–
–
6SE6400-3CC03-5CD3
EMC filter, Class B,
6SE6400-3CC04-4DD0
available from Schaffner
6SE6400-3CC05-2DD0
6SE6400-3CC08-3ED0
6SE6400-3CC11-2FD0
–
–
–
–
6SL3000-0BE36-0AA0 *) –
6SE6400-3TD03-7DD0
6SE6400-3TD04-8DD0
6SE6400-3TD06-1DD0
6SE6400-3TD07-2ED0
6SE6400-3TD11-5FD0
6SE6400-3TD15-0FD0
6SE6400-3TD18-0FD0
6SL3000-2CE32-3AA0
6SL3000-2CE32-8AA0
6SL3000-2CE33-3AA0
6SL3000-2CE34-1AA0
Order No. of the options
Fuses (see Catalog LV 1)
3NA3
3NA3807
3NA3812
3NA3814
3NA3820
3NA3822
3NA3824
3NA3830
3NA3832
3NA3836
3NA3140
3NA3144
–
–
–
–
–
Line commutating
choke
6SE6400-3CC02-2CD3
6SE6400-3CC11-7FD0
6SL3000-0CE32-3AA0
6SL3000-0CE32-8AA0
6SL3000-0CE33-3AA0
6SL3000-0CE35-1AA0
Output choke
6SE6400-3TC03-2CD3
Gland plate
6SE6400-0GP00-0CA0
6SE6400-3TC05-4DD0
6SE6400-3TC03-8DD0
6SE6400-3TC05-4DD0
6SE6400-3TC08-0ED0
6SE6400-3TC07-5ED0
6SE6400-3TC14-5FD0
6SE6400-3TC15-4FD0
6SE6400-3TC14-5FD0
Integrated as standard
for shield connection of
the control cable and the
power cable.
6SL3000-2BE32-1AA0
6SL3000-2BE32-6AA0
6SL3000-2BE33-2AA0
6SL3000-2BE33-8AA0
6SL3000-2BE35-0AA0
3NE1 (U)
l (see page 3/15)
3NE1817-0
3NE1818-0
3NE1820-0
3NE1021-0
3NE1022-0
3NE1224-0
3NE1225-0
3NE1227-0
3NE1230-0
3NE1332-0
3NE1333-0
3NE1435-0
Integrated as standard
for shield connection of
the control cable. The
shield of the power cable
has to be connected
externally (e.g. in the
control cabinet).
Circuit-breaker
(see Catalog LV 1)
3RV1031-4EA10
3RV1031-4FA10
3RV1031-4HA10
3RV1042-4KA10
3RV1042-4MA10
3VL1712- . DD33- . . . .
3VL1716- . DD33- . . . .
3VL3720- . DC36- . . . .
3VL3725- . DC36- . . . .
3VL3725- . DC36- . . . .
3VL4731- . DC36- . . . .
3VL4740- . DC36- . . . .
3VL5750- . DC36- . . . .
© Siemens AG 2007
MICROMASTER 430
Options
Variant dependent options
■ Selection and ordering data (continued)
All options are certified to
u, except fuses.
The 3NE1 fuses are u-listed
(equivalent to U).
Mains voltage
3 AC 380 V to 480 V
Mains voltage
3 AC 380 V to 480 V
Mains voltage
3 AC 380 V to 480 V
Output
kW
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
hp
10
15
20
25
30
40
50
60
75
100
120
Output
kW
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
hp
10
15
20
25
30
40
50
60
75
100
120
Output
kW
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
hp
10
15
20
25
30
40
50
60
75
100
120
Additional information on
the listed fuses and circuitbreakers can be found in
Catalogs LV 1 and LV 1 T.
Inverter
with internal filter
Class A
6SE6430-2AD27-5CA0
6SE6430-2AD31-1CA0
6SE6430-2AD31-5CA0
6SE6430-2AD31-8DA0
6SE6430-2AD32-2DA0
6SE6430-2AD33-0DA0
6SE6430-2AD33-7EA0
6SE6430-2AD34-5EA0
6SE6430-2AD35-5FA0
6SE6430-2AD37-5FA0
6SE6430-2AD38-8FA0
l Use in America requires
u-listed fuses such as the
Class NON/NOS range from
Bussmann.
Order No. of the options
Additional EMC filter,
Class B
6SE6400-2FS03-8CD0
An inverter without filter
must be selected to satisfy the EMC requirements of Class B. In
addition, an appropriate
EMC filter of Class B is
from Schaffner is
required.
Line commutating
choke
6SE6400-3CC02-2CD3
6SE6400-3CC03-5CD3
6SE6400-3CC04-4DD0
6SE6400-3CC05-2DD0
6SE6400-3CC08-3ED0
6SE6400-3TD03-2CD0
6SE6400-3TD03-7DD0
6SE6400-3TD04-8DD0
6SE6400-3TD06-1DD0
6SE6400-3TD07-2ED0
6SE6400-3TD11-5FD0
6SE6400-3CC11-2FD0
6SE6400-3CC11-7FD0
Inverter
with internal filter
Class A
Order No. of the options
Output choke
Gland plate
6SE6430-2AD27-5CA0
6SE6430-2AD31-1CA0
6SE6430-2AD31-5CA0
6SE6430-2AD31-8DA0
6SE6430-2AD32-2DA0
6SE6430-2AD33-0DA0
6SE6430-2AD33-7EA0
6SE6430-2AD34-5EA0
6SE6430-2AD35-5FA0
6SE6430-2AD37-5FA0
6SE6430-2AD38-8FA0
6SE6400-3TC03-2CD3
6SE6400-0GP00-0CA0
6SE6400-3TC05-4DD0
6SE6400-3TC03-8DD0
6SE6400-3TC05-4DD0
6SE6400-3TC08-0ED0
6SE6400-3TC07-5ED0
6SE6400-3TC14-5FD0
6SE6400-3TC15-4FD0
6SE6400-3TC14-5FD0
Integrated as standard
for shield connection of
the control cable and the
power cable.
Inverter with internal filter Class A
Order No. of the options
Fuses (see Catalog LV 1)
3NA3
3NA3807
3NA3812
3NA3814
3NA3820
3NA3822
3NA3824
3NA3830
3NA3832
3NA3836
3NA3140
3NA3144
6SE6430-2AD27-5CA0
6SE6430-2AD31-1CA0
6SE6430-2AD31-5CA0
6SE6430-2AD31-8DA0
6SE6430-2AD32-2DA0
6SE6430-2AD33-0DA0
6SE6430-2AD33-7EA0
6SE6430-2AD34-5EA0
6SE6430-2AD35-5FA0
6SE6430-2AD37-5FA0
6SE6430-2AD38-8FA0
LC filter
6SE6400-3TD15-0FD0
6SE6400-3TD18-0FD0
3
3NE1 (U)
l
3NE1817-0
3NE1818-0
3NE1820-0
3NE1021-0
3NE1022-0
3NE1224-0
3NE1225-0
3NE1227-0
Circuit-breaker
(see Catalog LV 1)
3RV1031-4EA10
3RV1031-4FA10
3RV1031-4HA10
3RV1042-4KA10
3RV1042-4MA10
3VL1712- . DD33- . . . .
3VL1716- . DD33- . . . .
3VL3720- . DC36- . . . .
3VL3725- . DC36- . . . .
3VL4731- . DC36- . . . .
Siemens DA 51.2 · 2007/2008
3/15
© Siemens AG 2007
MICROMASTER 430
Options
Variant independent options
■ Overview
Basic Operator Panel 2
(BOP-2)
With the BOP-2, individual parameter settings can be made.
Values and units are shown on
a 5-digit display.
PROFIBUS module
CANopen module
Start-up tools
For a complete PROFIBUS
connection with up to
£12 Mbaud. Remote control
of the inverter is possible with
the PROFIBUS module. Remote control and operation at
the inverter can be combined
using an operator panel
plugged onto the PROFIBUS
module. The PROFIBUS module can be supplied by an external 24 V DC power supply
and is thus also active when
the inverter is disconnected
from the power supply.
Using the CANopen communications module, an inverter
can be linked to the CANopen
fieldbus system and remote
control is then possible.
• STARTER
is a graphic start-up software for guided start-up for
MICROMASTER 410/420/
430/440 frequency inverters
under Windows 2000/
XP Professional. Parameter
lists can be read out, altered, stored, entered and
printed.
Connection by means of a
9-pin Sub-D connector (available as an option).
Basic Operator Panel (BOP-2)
DeviceNet module
A BOP-2 can be used for several inverters. It can be directly mounted on the inverter or in
a control cabinet door using a
mounting kit.
For networking the inverters to
the DeviceNet fieldbus system
widely used on the American
market. A maximum transmission rate of 500 kbaud is possible. Remote control of the inverter is possible with the
DeviceNet module.
Remote control and operation
at the inverter can be combined using an operator panel
plugged onto the DeviceNet
module.
3
The connection to the
DeviceNet bus system is
made using a 5-pin connector
with terminal strip.
Remote control and operation
at the inverter can be combined using an operator panel
plugged onto the CANopen
module.
The module is connected to
the bus system through a
9-pin Sub-D connector.
Connection kit for
PC to inverter
For controlling an inverter directly from a PC if the appropriate software has been installed (e.g. STARTER).
Isolated RS-232 adapter module for reliable point-to-point
connection to a PC. Includes a
Sub-D connector and an
RS-232 standard cable (3 m).
• DriveMonitor
is a start-up software for listoriented programming of
frequency inverters. This
program executes under
Windows 98/NT/2000/ME/
XP Professional.
Both programs are included
on the Docu DVD which is provided with every inverter.
Operator panel door mounting kit for single inverter
For mounting an operator panel BOP-2 in a control cabinet
door. Degree of protection
IP56. Contains a cable adapter module with screwless terminals for use with user's own
RS-232 cables 1).
1) A shielded cable of type
Belden 8132 (28 AWG) is
recommended.
The maximum cable length is
5 m for RS-232.
■ Selection and ordering data
The options listed here are
suitable for all
MICROMASTER 430 inverters.
Options
Basic Operator Panel 2 (BOP-2)
PROFIBUS module
DeviceNet module
CANopen module
RS485/PROFIBUS bus connector
Connection kit for PC to inverter
Operator panel door mounting kit for single inverter
Start-up tool STARTER on DVD
3/16
Siemens DA 51.2 · 2007/2008
Order No.
6SE6400-0BE00-0AA0
6SE6400-1PB00-0AA0
6SE6400-1DN00-0AA0
6SE6400-1CB00-0AA0
6GK1500-0FC00
6SE6400-1PC00-0AA0
6SE6400-0PM00-0AA0
6SL3072-0AA00-0AG0
Available on the Internet at:
http://support.automation.siemens.com/
WW/view/en/10804985/133100
© Siemens AG 2007
MICROMASTER 430
Options
Variant independent options
■ Technical data of the communication modules
PROFIBUS module
6SE6400-1PB00-0AA0
Size (height x width x depth)
Degree of protection
Degree of pollution
Strain resistance
• Stationary
• Transport
Deflection
Acceleration
Deflection
Acceleration
Climatic category (during operation)
Cooling method
Permissible ambient or cooling agent temperature
• Operation
• Storage and transport
Relative humidity
(permissible humidity rating)
• Operation
• Storage and transport
Electromagnetic compatibility
Emission
Interference
Power supply
Output voltage
Data transmission rate
DeviceNet module
6SE6400-1DN00-0AA0
161 mm x 73 mm x 46 mm
IP20
2 to IEC 60 664-1 (DIN VDE 0110/T1), no condensation permitted during operation
to IEC 60 068-2-6 (if module is installed correctly)
0.15 mm in the frequency range of 10 Hz to 58 Hz
19.6 m/s2 in the frequency range of 58 Hz to 500 Hz
3.5 mm in the frequency range of 5 Hz to 9 Hz
9.8 m/s2 in the frequency range of 9 Hz to 500 Hz
3K3 to IEC 60 721-3-3
Natural air cooling
–10 °C to +50 °C (+14 °F to +122 °F)
–25 °C to +70 °C (–13 °F to +158 °F)
£ 85 % (non-condensing)
£ 95 %
to EN 55 011 (1991) Class A
to IEC 60 801-3 and EN 61 000-4-3
6.5 V ± 5 %, max. 300 mA,
internal from inverter or
24 V ± 10 %, max. 350 mA, external
5 V ± 10 %, max. 100 mA,
galvanically isolated supply
• for terminating the serial interface bus or
• for supplying the OLP (Optical Link Plug)
max. 12 Mbaud
3
6.5 V ± 5 %, max. 300 mA
internal from inverter or
24 V, max. 60 mA from DeviceNet-Bus
–
125, 250 and 500 Kbaud
Siemens DA 51.2 · 2007/2008
3/17
© Siemens AG 2007
MICROMASTER 430
Options
Variant independent options
■ Technical data of the communication modules (continued)
CANopen module
6SE6400-1CB00-0AA0
Size (height x width x depth)
Degree of protection
Degree of pollution
Strain resistance
• Stationary
• Transport
3
Deflection
Acceleration
Deflection
Acceleration
Climatic category (during operation)
Cooling method
Permissible ambient or cooling agent temperature
• Operation
• Storage
• Transport
Relative humidity (permissible humidity rating)
• Operation
• Storage and transport
Power supply
Data transmission rate
161 mm x 73 mm x 46 mm
IP20
2 to IEC 60 664-1 (DIN VDE 0110/T1), no condensation permitted during operation
to IEC 60 068-2-6 (if module is installed correctly)
0.15 mm in the frequency range of 10 Hz to 58 Hz
19.6 m/s2 in the frequency range of 58 Hz to 500 Hz
3.5 mm in the frequency range of 5 Hz to 9 Hz
9.8 m/s2 in the frequency range of 9 Hz to 500 Hz
3K3 to IEC 60 721-3-3
Natural air cooling
–10 °C to +50 °C (+14 °F to +122 °F)
–40 °C to +70 °C (–40 °F to +158 °F)
–25 °C to +70 °C (–13 °F to +158 °F)
£ 85 % (non-condensing)
£ 95 %
The CAN bus is supplied from the inverter power supply
10, 20, 50, 125, 250, 500, 800 Kbaud and 1 Mbaud
Documentation
■ Selection and ordering data
Type of documentation
Docu pack,
supplied with each inverter,
containing DVD 1) and Getting Started Guide 2)
(paper version)
Operating instructions
(paper version)
Parameter list
(paper version)
1) The DVD contains operating
instructions, parameter list,
commissioning tools STARTER
and DriveMonitor, multilanguage.
3/18
Language
Multilanguage
German, English, French, Italian, Spanish
Available as pdf file on the Internet at
http://support.automation.siemens.com/WW/view/en/10804926/133300
German, English, French, Italian, Spanish
Available as pdf file on the Internet at
http://support.automation.siemens.com/WW/view/en/10804926/133300
Available on the Internet:
DriveMonitor at
http://support.automation.
siemens.com/WW/view/en/
10804984/133100
Siemens DA 51.2 · 2007/2008
Order No.
6SE6400-5AD00-1AP1
STARTER at
http://support.automation.
siemens.com/WW/view/en/
10804985/133100
2) Available on the Internet at
http://support.automation.
siemens.com/WW/view/en/
10804926/133300
© Siemens AG 2007
MICROMASTER 430
Dimension drawings
■ MICROMASTER 430 inverter
Frame size
C
D
E
Note:
The inverters must not be mounted horizontally.
But the inverters can be mounted without lateral spacing.
3 AC 380 V to 480 V
7.5 kW to 15 kW
18.5 kW to 30 kW
37 kW to 45 kW
ADA51-5009b
309 (12.16)
ADA51-5002d
245 (9.65)
204 (8.03)
Drill pattern
174 (6.85)
(7 195
.6
8)
Fixing with
4 x M5 bolts
4 x M5 nuts
4 x M5 washers
Tightening torque with washers fitted:
3.0 Nm
Ventilation clearance required at top
and bottom: 100 mm
185 (7.28)
Inverter frame size C
Inverter frame size C
with gland plate
Drill pattern
3
Inverter frame size D
Fixing with
4 x M8 bolts
4 x M8 nuts
4 x M8 washers
Tightening torque with
washers fitted: 13 Nm
Ventilation clearance
required at top and bottom:
300 mm
With the communication module, the mounting depth increases
for frame size C by 23 mm (0.91 inches).
616.4 (24.27)
650 (25.59)
ADA51-5021b
486 (19.13)
235 (9.25)
275 (10.82)
(9 245
.6
5)
275 (10.82)
(9 245
.6
5)
ADA51-5020b
520 (20.47)
Drill pattern
Inverter frame size E
235 (9.25)
Fixing with
4 x M8 bolts
4 x M8 nuts
4 x M8 washers
Tightening torque with
washers fitted: 13 Nm
Ventilation clearance
required at top and bottom:
300 mm
All dimensions in mm (values in brackets are in inches)
Siemens DA 51.2 · 2007/2008
3/19
© Siemens AG 2007
MICROMASTER 430
Dimension drawings
■ MICROMASTER 430 inverter
Frame size
F
Note:
The inverters must not be mounted horizontally.
But the inverters can be mounted without lateral spacing.
3 AC 380 V to 480 V
55 kW to 90 kW
Drill pattern
1110 (43.70)
1150 (45.28)
300 (11.81)
350 (13.78)
(1 320
2.
6)
350 (13.78)
Inverter frame size F without filter
Fixing with
4 x M8 bolts
4 x M8 nuts
4 x M8 washers
Tightening torque with
washers fitted: 13 Nm
Ventilation clearance
required at top and bottom:
350 mm
ADA51-5023b
810 (31.89)
300 (11.81)
(1 320
2.
6)
3
ADA51-5022b
850 (33.46)
Drill pattern
Inverter frame size F with filter
Fixing with
4 x M8 bolts
4 x M8 nuts
4 x M8 washers
Tightening torque with
washers fitted: 13 Nm
Ventilation clearance
required at top and bottom:
350 mm
All dimensions in mm (values in brackets are in inches)
3/20
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
MICROMASTER 430
Dimension drawings
■ MICROMASTER 430 inverter
Frame size
FX
GX
Note:
The inverters must not be mounted horizontally.
But the inverters can be mounted without lateral spacing.
3 AC 380 V to 480 V
110 kW to 132 kW
160 kW to 250 kW
Drill pattern
Drill pattern
125 125
(4.92) (4.92)
Inverter frame size FX
1533 (60.35)
326
(12.83)
(2 54
1. 5
46
)
Fixing with
6 x M8 bolts
6 x M8 nuts
6 x M8 washers
Tightening torque
with washers
fitted: 13.0 Nm
Ventilation clearance
required:
at top: 250 mm
at bottom: 150 mm
in front: 40 mm
G_DA51_EN_05075
1375 (54.13)
1400 (55.12)
(1 35
4. 6
06
)
G_DA51_EN_05074
326
(12.83)
125 125
(4.92) (4.92)
1508 (59.37)
125 125
(4.92) (4.92)
Inverter frame size GX
3
125 125
(4.92) (4.92)
Fixing with
6 x M8 bolts
6 x M8 nuts
6 x M8 washers
Tightening torque
with washers
fitted: 13.0 Nm
Ventilation clearance
required:
at top: 250 mm
at bottom: 150 mm
in front: 50 mm
All dimensions in mm (values in brackets are in inches)
Siemens DA 51.2 · 2007/2008
3/21
© Siemens AG 2007
MICROMASTER 430
Dimension drawings
■ EMC filter
185 (7.28)
156 (6.14)
38
(1.5)
219 (8.62)
232 (9.13)
G_DA51_EN_00063
245 (9.65)
204 (8.03)
4 x M4
55 (2.17)
174
(6.85)
EMC filter for frame size C
b1
n4
3
a1
n3
G_DA51_XX_05103
a
b
c
EMC filter
Class A
Type
6SL30000BE32-5AA0
for inverter
Frame size
(FS)
Dimensions
a
a1
b
b1
c
n3
n4
FX
0BE34-4AA0
FX/GX
0BE36-0AA0
GX
270
(10.63)
270
(10.63)
310
(12.2)
360
(14.17)
360
(14.17)
400
(15.75)
200
(7.87)
200
(7.87)
215
(8.46)
240
(9.45)
240
(9.45)
265
(10.43)
116
(4.57)
116
(4.57)
140
(5.51)
210
(8.27)
210
(8.27)
250
(9.84)
220
(8.66)
220
(8.66)
240
(9.45)
Weight,
approx.
kg
12.3
12.3
19.0
EMC filter for frame sizes FX and GX
All dimensions in mm (values in brackets are in inches)
3/22
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
MICROMASTER 430
Dimension drawings
■ LC filter
185 (7.28)
140
(5.51)
Drill pattern
G_DA51_EN_05081
G_DA51_EN_05078a
382 (15.04)
335 (13.19)
320 (12.6)
174 (6.85)
156 (6.14)
Fixing with M5 bolts
LC filter 6SE6400-3TD03-2CD0 for frame size C
b
LC filter
Type
for inverter
Frame size
(FS)
6SE6400-3TD03-7DD0
D
6SE6400-3TD04-8DD0
D
6SE6400-3TD06-1DD0
D
6SE6400-3TD07-2ED0
E
6SE6400-3TD11-5FD0
E/F
6SE6400-3TD15-0FD0
F
6SE6400-3TD18-0FD0
F
a
G_DA51_XX_05082
c
n2
n1
Dimensions
a
278
(10.94)
290
(11.42)
345
(13.58)
355
(13.98)
460
(18.11)
460
(18.11)
520
(20.47)
Weight
(max.)
b
240
(9.45)
240
(9.45)
300
(11.81)
300
(11.81)
360
(14.17)
360
(14.17)
420
(16.54)
c
230
(9.06)
240
(9.45)
220
(8.66)
235
(9.25)
235
(9.25)
250
(9.84)
290
(11.42)
n1
115
(4.53)
125
(4.92)
120
(4.72)
145
(5.71)
125
(4.92)
140
(5.51)
173
(6.81)
n2
190
(7.48)
190
(7.48)
240
(9.45)
240
(9.45)
264
(10.39)
264
(10.39)
316
(12.44)
kg
21.0
26.0
34.0
49.5
67.0
75.0
77.5
Fixing with M10 bolts
LC filter for frame sizes D to F
All dimensions in mm (values in brackets are in inches)
Siemens DA 51.2 · 2007/2008
3/23
3
© Siemens AG 2007
MICROMASTER 430
Dimension drawings
■ Sinusoidal filter
a
G_DA51_XX_00013
b
n1
n2
n3
c
n4
Sinusoidal filter for frame sizes FX and GX
Sinusoidal filter
Type 6SL3000-
for inverter
Frame size (FS)
2CE32-3AA0
FX
2CE32-8AA0
GX
Dimensions
a
300
(11.81)
300
(11.81)
b
620
(24.41)
620
(24.41)
c
320
(12.6)
320
(12.6)
n1
280
(11.02)
280
(11.02)
n2
105
(4.13)
105
(4.13)
n3
225
(8.86)
225
(8.86)
n4
150
(5.91)
150
(5.91)
Weight
(max.)
kg
135.0
138.0
a
G_DA51_XX_00014
b
3
n1
n2
n3
c
n4
Sinusoidal filter for frame size GX
Sinusoidal filter
Type 6SL3000-
for inverter
Frame size (FS)
2CE33-3AA0
GX
2CE34-1AA0
GX
Dimensions
a
370
(14.57)
370
(14.57)
b
620
(24.41)
620
(24.41)
c
360
(14.17)
360
(14.17)
n1
320
(12.6)
320
(12.6)
n2
105
(4.13)
105
(4.13)
n3
225
(8.86)
225
(8.86)
n4
150
(5.91)
150
(5.91)
Weight
(max.)
kg
144.0
208.0
All dimensions in mm (values in brackets are in inches)
3/24
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
MICROMASTER 430
Dimension drawings
■ Line commutating chokes
Frame size C
a
DA51-5051
d
e
G_DA51_XX_00064
a
Line commutating choke
for
b
c
b
c
Dimensions
a
b
c
d
e
245
185
50
264
280
(9.65) (7.28) (1.97) (10.39) (11.02)
Line commutating
choke for
Weight
(max.)
kg
5.1
Frame size D
Frame size E
Line commutating choke for frame size C
Dimensions
a
520
(20.47)
650
(25.59)
b
275
(10.83)
275
(10.83)
c
85
(3.35)
95
(3.74)
Weight
(max.)
kg
9.5
17.0
Line commutating choke for frame sizes D and E
b
a
G_DA51_XX_05052
c
Line commutating
choke
Type 6SE64003CC11-....
n1
n2
for inverter
Dimensions
Frame size
F
a
b
c
n1
n2
228
240
141
95
185
(8.98) (9.45) (5.55) (3.74) (7.28)
Weight
(max.)
kg
25.0
Line commutating choke for inverter frame size F
b
a
G_DA51_XX_05053
c
Line commutating choke
Type
6SL30000CE32-....
0CE33-....
0CE35-....
for inverter Dimensions
Frame size
(FS)
a
b
FX
248
255
(9.76)
(10.04)
GX
248
255
(9.76)
(10.04)
GX
269
275
(10.59) (10.83)
Weight
(max.)
c
203
(7.99)
203
(7.99)
210
(8.27)
n1
101
(3.98)
101
(3.98)
118
(4.65)
n2
200
(7.87)
200
(7.87)
224
(8.82)
kg
24.0
25.0
35.0
n1
n2
Line commutating choke for inverters of frame sizes FX and GX
All dimensions in mm (values in brackets are in inches)
Siemens DA 51.2 · 2007/2008
3/25
3
© Siemens AG 2007
MICROMASTER 430
Dimension drawings
■ Output chokes
b
a
G_DA51_XX_05050a
c
Output chokes for
Dimensions
Frame size C
a
b
c
245
185
80
(9.65) (7.28) (3.15)
Weight
(max.)
kg
6.6
Line commutating choke
for frame size C
b
a
G_DA51_XX_05052
c
Output chokes
for inverters of size D, E and F
b
G_DA51_XX_05053
c
a
3
n1
n2
Output
choke
Type
6SE6400-
for inverter Dimensions
Frame size
(FS)
a
b
3TC03-8DD0
D
3TC05-4DD0
D
3TC07-5ED0
E
3TC08-0ED0
E
3TC14-5FD0
F
3TC15-4FD0
F
Output
choke
Type
6SL30002BE32-1AA0
for inverter Dimensions
Frame size
(FS)
a
b
2BE32-6AA0
FX
2BE33-2AA0
GX
2BE33-8AA0
GX
2BE35-0AA0
GX
FX
210
(8.27)
210
(8.27)
248
(9.76)
210
(8.27)
321
(12.64)
248
(9.76)
285
(11.22)
315
(12.4)
285
(11.22)
285
(11.22)
365
(14.37)
225
(8.86)
225
(8.86)
270
(10.63)
225
(8.86)
350
(13.78)
270
(10.63)
300
(11.81)
300
(11.81)
300
(11.81)
300
(11.81)
300
(11.81)
c
179
(7.05)
150
(5.91)
209
(8.23)
150
(5.91)
288
(11.34)
209
(8.23)
n1
n2
(to DIN 41308)
94
176
(3.70)
(6.93)
70
176
(2.76)
(6.93)
101
200
(3.98)
(7.87)
70
176
(2.76)
(6.93)
138
264
(5.43)
(10.39)
101
200
(3.98)
(7.87)
c
n1
n2
257
(10.12)
277
(10.91)
257
(10.12)
277
(10.91)
277
(10.91)
163
(6.42)
183
(7.2)
163
(6.42)
183
(7.2)
183
(7.2)
224
(8.82)
224
(8.82)
224
(8.82)
224
(8.82)
224
(8.82)
Weight
(max.)
kg
16.1
10.7
24.9
10.4
51.5
24.0
Weight
(max.)
kg
60.0
66.0
62.0
73.0
100.0
n1
n2
Output chokes
for inverters of size FX and GX
All dimensions in mm (values in brackets are in inches)
3/26
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
Inverter
MICROMASTER 440
4/2
Description
4/4
Circuit diagrams
4/6
Technical data
4/9
Selection and ordering data
4/12
Options
4/26
Dimension drawings
4
Siemens DA 51.2 · 2007/2008
4/1
© Siemens AG 2007
MICROMASTER 440
Description
■ Application
The MICROMASTER 440 inverter is suitable for a variety
of variable-speed drive applications. Its flexibility provides
for a wide spectrum of applications. These also include
cranes and hoisting gear,
high-bay warehouses, production machines for food,
beverages and tobacco,
packaging machines etc.; i.e.
applications which require the
frequency inverter to have a
higher functionality and dynamic response than usual.
4
The inverter is especially characterized by its customer-oriented performance and easeof-use. Its large mains voltage
range enables it to be used all
over the world.
■ Design
The MICROMASTER 440 inverter has a modular design.
The operator panels and modules can be easily exchanged.
■ International standards
■ The MICROMASTER 440
inverter complies with the
requirements of the EU lowvoltage guideline
■ The MICROMASTER 440
inverter has the > marking
■ acc. to u and cu certified
✔
■ c-tick ●
Note:
■ See Appendix for standards.
■ Main characteristics
■ Basic Operator Panel
■ Easy, guided start-up
■ Modular construction al-
■
■
■
■
■
■
lows maximum configuration flexibility
Six programmable isolated
digital inputs
Two scaleable analog inputs (0 V to 10 V, 0 mA to
20 mA) can also be used as
a 7th/8th digital input
Two programmable analog
outputs (0 mA to 20 mA)
Three programmable relay
outputs (30 V DC/5 A resistive load; 250 V AC/2A inductive load)
Low-noise motor operation
thanks to high pulse frequencies, adjustable (observe derating if necessary)
Complete protection for
motor and inverter.
■ Options (overview)
■
■
■
■
■
■
■
■
■ EMC filter, Class A/B
■ LC filter and sinusoidal filter
■ Line commutating chokes
■ Output chokes
■ Gland plates
4/2
Siemens DA 51.2 · 2007/2008
■
(BOP) for parameterizing
the inverter
Plain text Advanced Operator Panel (AOP) with multilanguage display
Plain text Asian Advanced
Operator Panel (AAOP)
with Chinese and English
display
Plain text Cyrillic Advanced
Operator Panel (CAOP)
with Cyrillic, German and
English display
Communication modules
– PROFIBUS
– DeviceNet
– CANopen
Pulse encoder evaluation
module
PC connection kits
Mounting kits for installing
the operator panels in the
control cabinet doors
PC start-up tools executable under Windows 98
and NT/2000/ME/
XP Professional
TIA integration with
Drive ES.
© Siemens AG 2007
MICROMASTER 440
Description
■ Mechanical features
■ Performance features
■ Modular design
■ Latest IGBT technology
■ Operating temperature
■ Digital microprocessor
■
■
■
■
0.12 kW to 75 kW:
–10 °C to +50 °C
(+14 °F to +122 °F)
90 kW to 200 kW:
0 °C to +40 °C
(+32 °F to +104 °F)
Compact housing as a result of high power density
Easy cable connection,
mains and motor connections are separated for optimum electromagnetic compatibility
Detachable operator
panels
Screwless control terminals
on detachable I/O board.
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
control
High-quality Vector Control
system
Flux Current Control (FCC)
for improved dynamic response and optimized motor control
Linear V/f characteristic
Quadratic V/f characteristic
Multipoint characteristic
(programmable V/f characteristic)
Torque control
Flying restart
Slip compensation
Automatic restart following
mains failure or fault
User-definable function
blocks for logic and arithmetic operations
Kinetic buffering
Positioning ramp down
High-grade PID controller
for simple internal process
control (autotuning)
Programmable acceleration/deceleration, 0 s to
650 s
Ramp smoothing
Fast Current Limit (FCL) for
trip-free operation
Fast, repeatable digital input response time
Fine adjustment using two
high-resolution 10-bit analog inputs
Compound braking for controlled rapid braking
Integrated brake chopper
(for 0.12 kW to 75 kW inverters)
Four skip frequencies
Removable “Y” capacitor
for use on IT systems (with
non-grounded mains supplies, the “Y” capacitor
must be removed and an
output choke installed).
■ Protection features
■ Overload capability
■ Overvoltage/undervoltage
– CT mode
0.12 kW to 75 kW:
Overload current 1.5 x
rated output current (i.e.
150 % overload capability) for 60 s, cycle time
300 s, and 2 x rated output current (i.e. 200 %
overload capability) for
3 s, cycle time 300 s
90 kW to 200 kW:
Overload current 1.36 x
rated output current (i.e.
136 % overload capability) for 57 s, cycle time
300 s, and 1.6 x rated output current (i.e. 160 %
overload capability) for
3 s, cycle time 300 s
– VT mode
5.5 kW to 90 kW:
Overload current 1.4 x
rated output current (i.e.
140 % overload capability) for 3 s, and 1.1 x rated
output current (i.e. 110 %
overload capability) for
60 s, cycle time 300 s
110 kW to 250 kW:
Overload current 1.5 x
rated output current (i.e.
150 % overload capability) for 1 s, and 1.1 x rated
output current (i.e. 110 %
overload capability) for
59 s, cycle time 300 s
protection
■ Inverter overtemperature
protection
■ Special direct connection
■
■
■
■
■
■
for PTC or KTY to protect
the motor
Earth fault protection
Short-circuit protection
I2t motor thermal protection
Locked motor protection
Stall prevention
Parameter interlock.
4
Siemens DA 51.2 · 2007/2008
4/3
© Siemens AG 2007
MICROMASTER 440
Circuit diagrams
■ General circuit diagram
PE
1/3 AC 200 - 240 V
3 AC 380 - 480 V
3 AC 500 - 640 V
SI
2
≥ 4,7 k Ω
3
0V
ADC1+
ADC1-
AA/
DD
BOP link
4
ADC2+
10
150.00
BOP/AOP
DIN1
DIN1
5
5
6
6
7
7
8
8
DIN2
~
~
Opto isolation
DIN2
DIN3
DIN3
DIN4
DIN4
DIN5
+
_ 24 V
ADC2-
RS232
AA/
DD
11
24 V external
DIN6
L/L1, N/L2,
or
L/L1, N/L2, L3
or
L1, L2, L3
PE
+ 10 V
1
==
Frame sizes
A to F
B+/DC+
DIN5
DC-
16
16
17
DC-
17
PNP
or
NPN
Output +24 V
max. 100 mA
(isolated)
Output 0 V
max. 100 mA
(isolated)
9
28
28
Frame sizes
FX and GX
PTCA
Motor
PTC/
KTY 84
14
DCNA
A
PTCB
DCPA
D
15
DCNS
CPU
DCPS
DAC1+
0 - 20 mA
max. 500
12
D
DAC1-
Terminal
for
dv/dt Filter
=
DAC2+
26
Terminal
for
external
brake unit
A
13
0 - 20 mA
max. 500
R
B-
DIN6
3
D
DAC2-
~
A
27
4
30 V DC/5 A (resistive load)
250 V AC/2 A (inductive load)
COM
20 NO
Not
used
50 Hz
1 2
DIP switch
(on control board)
19 NC
18
COM
Relay 2 22 NO
21
0 - 20 mA
current
0 - 10 V
voltage
COM
Relay 3
60 Hz
25 NO
24
NC
23
ADC ADC
1 2 DIP
switch
on I/O
board
1 2
P+
29
N-
RS485
COM link
30
PE
CB
option
4/4
Siemens DA 51.2 · 2007/2008
automatic
U, V, W
M
G_DA51_EN_05024h
Relay 1
© Siemens AG 2007
MICROMASTER 440
Circuit diagrams
■ Terminal connection diagram
Example, frame size FX
Mains connections
View A
Motor connections
AIN1 AIN2
S1
RL1-A
RL1-B
RL1-C
RL2-B
RL2-C
RL3-A
RL3-B
RL3-C
18
19
20
21
22
23
24
25
S2
DIP Switches:
0 mA to 20 mA
or
0 V to 10 V
DAC1+ DAC1-
12
G_DA51_EN_05107
View A
Output relay contacts
PTC
A
PTC
B
DIN5
DIN6
DAC2+
DAC2-
PE
0V
P+
N-
14
18
15
16
17
26
27
28
29
30
13
NPN *)
Analog output 1
+10 V
0V
Digital inputs
ADC1+
ADC1-
DIN1
DIN2
Analog output 2
DIN3
DIN4
RS-485
(USS-protocol)
+24 V
ADC2+
2
3
ADC2-
(DIN8)
(DIN7)
1
4
4
5
6
7
8
9
10
11
PNP *)
Voltage
supply 10 V
Analog input 1
Digital inputs
Analog input 2
*) PNP or NPN possible
Siemens DA 51.2 · 2007/2008
4/5
© Siemens AG 2007
MICROMASTER 440
Technical data
■ MICROMASTER 440 inverter
Mains voltage and
power ranges
CT (constant torque)
VT (variable torque)
1 AC 200 V to 240 V ± 10 % 0.12 kW to 3 kW
–
3 AC 200 V to 240 V ± 10 % 0.12 kW to 45 kW
5.5 kW to 55 kW
3 AC 380 V to 480 V ± 10 % 0.37 kW to 200 kW
7.5 kW to 250 kW
3 AC 500 V to 600 V ± 10 % 0.75 kW to 75 kW
1.5 kW to 90 kW
Input frequency
47 Hz to 63 Hz
Output
0.12 kW to 75 kW 0 Hz to 650 Hz (in V/f mode) 0 Hz to 200 Hz (in vector mode)
frequency
90 kW to 200 kW 0 Hz to 267 Hz (in V/f mode) 0 Hz to 200 Hz (in vector mode)
Power factor
³ 0.95
Inverter efficiency
0.12 kW to 75 kW: 96 % to 97 %; 90 kW to 200 kW: 97 % to 98 % (Further information is available
on the Internet at: http://support.automation.siemens.com/WW/view/en/22978972)
Overload capability
– CT mode
0.12 kW to 75 kW Overload current 1.5 x rated output current (i.e. 150 % overload capability) for 60 s, cycle time 300 s
and 2 x rated output current (i.e. 200 % overload capability) for 3 s, cycle time 300 s
90 kW to 200 kW Overload current 1.36 x rated output current (i.e. 136 % overload capability) for 57 s, cycle time 300 s
and 1.6 x rated output current (i.e. 160 % overload capability) for 3 s, cycle time 300 s
– VT mode
5.5 kW to 90 kW Overload current 1.4 x rated output current (i.e. 140 % overload capability) for 3 s,
and 1.1 x rated output current (i.e. 110 % overload capability) for 60 s, cycle time 300 s
110 kW to 250 kW Overload current 1.5 x rated output current (i.e. 150 % overload capability) for 1 s,
and 1.1 x rated output current (i.e. 110 % overload capability) for 59 s, cycle time 300 s
Inrush current
not higher than rated input current
Control method
Vector control, torque control, linear V/f characteristic; quadratic V/f characteristic;
Multipoint characteristic (programmable V/f characteristic); flux current control (FCC)
Pulse frequency
0.12 kW to 75 kW 4 kHz (standard); 16 kHz (standard with 230 V inverters 0.12 kW to 5.5 kW)
2 kHz to 16 kHz (in 2 kHz steps)
90 kW to 200 kW 2 kHz (standard with VT mode); 4 kHz (standard with CT mode)
2 kHz to 4 kHz (in 2 kHz steps)
Fixed frequencies
15, programmable
Skip frequency ranges
4, programmable
Setpoint resolution
0.01 Hz digital; 0.01 Hz serial; 10 bit analog
Digital inputs
6 fully programmable isolated digital inputs; switchable PNP/NPN
Analog inputs
Relay outputs
Analog outputs
Serial interfaces
Motor cable
without output choke
lengths
with output choke
Electromagnetic compatibility
(see Selection and Ordering Data)
Braking
4
Degree of protection
Operating
0.12 kW to 75 kW
temperature
(without derating) 90 kW to 200 kW
Storage temperature
Relative humidity
Installation altitude 0.12 kW to 75 kW
90 kW to 200 kW
Standard SCCR
(Short Circuit Current Rating) 1)
Protection features for
Compliance with standards
> marking
Cooling-air volumetric flow required,
dimensions and weights
(without options)
1) For footnote, see page 4/7.
4/6
2 programmable analog inputs
• 0 V to 10 V, 0 mA to 20 mA and –10 V to +10 V (AIN1)
• 0 V to 10 V and 0 mA to 20 mA (AIN2)
• both can be used as 7th/8th digital input
3, programmable, 30 V DC/5 A (resistive load); 250 V AC/2A (inductive load)
2, programmable (0/4 mA to 20 mA)
RS-485, optional RS-232
0.12 – 75 kW: max. 50 m (shielded), max. 100 m (unshielded)
90 – 250 kW:
max. 200 m (shielded), max. 300 m (unshielded)
see variant dependent options
EMC filter, Class A or Class B to EN 55 011 available as an option
Inverter with internal filter Class A available
Resistance braking with DC braking, compound braking, integrated brake chopper
(integrated brake chopper only with 0.12 kW to 75 kW inverters)
IP20
CT: –10 °C to +50 °C (+14 °F to +122 °F)
VT: –10 °C to +40 °C (+14 °F to +104 °F)
0 °C to +40 °C (+32 °F to +104 °F)
–40 °C to +70 °C (–40 °F to +158 °F)
95% (non-condensing)
up to 1000 m above sea level without derating
up to 2000 m above sea level without derating
FSA, FSB, FSC: 10 kA
FSD, FSE, FSF, FSFX, FSGX: 42 kA
Undervoltage, overvoltage, overload, earth faults, short-circuits, stall prevention, locked motor protection,
motor over-temperature, inverter overtemperature, parameter change protection
✔
u, cu, >, c-tick ●
Conformity with low-voltage directive 73/23/EEC
Frame size (FS)
A
B
C
D
E
F without filter
F with filter
FX
GX
CFM: Cubic Feet per Minute
Siemens DA 51.2 · 2007/2008
Cooling-air volumetric
flow required (l/s)/(CFM)
4.8/10.2
24/51
54.9/116.3
2 x 54.9/2 x 116.3
2 x 54.9/2 x 116.3
150/317.79
150/317.79
225/478.13
440/935
H
xW
x D, max. (mm) Weight, approx. (kg)
173
202
245
520
650
850
1150
1400
1533
x 73
x 149
x 185
x 275
x 275
x 350
x 350
x 326
x 326
x 149
x 172
x 195
x 245
x 245
x 320
x 320
x 356
x 545
1.3
3.4
5.7
17
22
56
75
116
174
© Siemens AG 2007
MICROMASTER 440
Technical data
■ Derating data
Pulse frequency
Output
Rated output current in A
for a pulse frequency of
kW
Mains voltage 1/3 AC 200 V
0.12 to 5.5
4 kHz
6 kHz
8 kHz
10 kHz
Values correspond to the 4 kHz standard values.
No derating, since 16 kHz standard.
7.5
28.0
26.6
25.2
22.4
11
42.0
37.8
33.6
29.4
15
54.0
48.6
43.2
37.8
18.5
68.0
64.6
61.2
54.4
22
80.0
72.0
64.0
56.0
30
104.0
91.0
78.0
70.2
37
130.0
113.8
97.5
87.8
45
154.0
134.8
115.5
104.0
Mains operating voltage 3 AC 400 V
0.37
1.3
1.3
1.3
1.3
0.55
1.7
1.7
1.7
1.6
0.75
2.2
2.2
2.2
2.0
1.1
3.1
2.9
2.8
2.5
1.5
4.1
3.7
3.3
2.9
2.2
5.9
5.6
5.3
4.7
3.0
7.7
6.9
6.2
5.4
4.0
10.2
9.2
8.2
7.1
5.5
13.2
11.9
10.6
9.2
7.5
19.0
18.1
17.1
15.2
11.0
26.0
23.4
20.8
18.2
15.0
32.0
30.4
28.8
25.6
18.5
38.0
34.2
30.4
26.6
22
45.0
40.5
36.0
31.5
30
62.0
58.9
55.8
49.6
37
75.0
67.5
60.0
52.5
45
90.0
76.5
63.0
51.8
55
110.0
93.5
77.0
63.3
75
145.0
112.4
79.8
68.9
90
178.0
–
–
–
110
205.0
–
–
–
132
250.0
–
–
–
160
302.0
–
–
–
200
370.0
–
–
–
Mains operating voltage 3 AC 500 V
0.75
1.4
1.2
1.0
0.8
1.5
2.7
2.2
1.6
1.4
2.2
3.9
2.9
2.0
1.6
4.0
6.1
4.6
3.1
2.4
5.5
9.0
6.8
4.5
3.6
7.5
11.0
8.8
6.6
5.5
11.0
17.0
12.8
8.5
6.8
15.0
22.0
17.6
13.2
11.0
18.5
27.0
20.3
13.5
10.8
22
32.0
24.0
16.0
12.8
30
41.0
32.8
24.6
20.5
37
52.0
39.0
26.0
20.8
45
62.0
52.7
43.4
40.3
55
77.0
67.4
57.8
52.0
75
99.0
84.2
69.3
64.4
1) Applies to industrial control
cabinet installations to NEC
article 409/UL 508A.
For further information, visit us
on the Internet at:
12 kHz
14 kHz
16 kHz
19.6
25.2
32.4
47.6
48.0
62.4
78.0
92.4
16.8
21.0
27.0
40.8
40.0
57.2
71.5
84.7
14.0
16.8
21.6
34.0
32.0
52.0
65.0
77.0
1.3
1.5
1.8
2.2
2.5
4.1
4.6
6.1
7.9
13.3
15.6
22.4
22.8
27.0
43.4
45.0
40.5
49.5
58.0
–
–
–
–
–
1.2
1.4
1.5
1.9
2.1
3.5
3.9
5.1
6.6
11.4
13.0
19.2
19.0
22.5
37.2
37.5
33.8
41.3
50.8
–
–
–
–
–
1.0
1.2
1.3
1.6
1.6
3.0
3.1
4.1
5.3
9.5
10.4
16.0
15.2
18.0
31.0
30.0
27.0
33.0
43.5
–
–
–
–
–
0.7
1.1
1.2
1.8
2.7
4.4
5.1
8.8
8.1
9.6
16.4
15.6
37.2
46.2
59.4
0.6
0.9
1.0
1.5
2.3
3.9
4.3
7.7
6.8
8.0
14.4
13.0
32.6
42.4
52.0
0.6
0.8
0.8
1.2
1.8
3.3
3.4
6.6
5.4
6.4
12.3
10.4
27.9
38.5
44.6
4
http://support.automation.
siemens.com/WW/view/en/
23995621
Siemens DA 51.2 · 2007/2008
4/7
© Siemens AG 2007
MICROMASTER 440
Technical data
■ Derating data (continued)
Operating temperature
Inverter 0.12 kW to 75 kW
Inverter 90 kW to 200 kW
A D A 5 1 -5 0 4 7 a
100
%
80
70
60
50
40
Rated output current
VT
CT
R a te d o u tp u t c u rre n t
G_DA51_EN_05026c
1 0 0
8 5
8 0
%
6 0
4 0
2 0
20
0
-10
0
10
20
0
30 40 50 60 °C 70
Operating temperature
0
2 0
1 0
3 0
4 0 4 5 °C
5 5
O p e r a tin g te m p e r a tu r e
Installation altitude above sea level
Permissible output current
in % of the rated output current
Inverter 0.12 kW to 75 kW
Inverter 90 kW to 200 kW
ADA51-5046
ADA51-5018c
100
85
80
%
60
Rated output current
Rated output current
100
%
80
60
40
20
20
0
40
0
1000
2000
0
3000 m 4000
Operational altitude
0
1000
2000
3000 m 4000
Operational altitude
Permissible mains voltage
in % of the max. possible mains voltage
Inverter 0.12 kW to 75 kW
Inverter 90 kW to 200 kW
ADA51-5019b
ADA51-5019b
100
%
80
77
Mains voltage
4
Mains voltage
100
%
80
77
60
60
40
40
20
20
0
0
1000
2000
3000 m 4000
Operational altitude
4/8
Siemens DA 51.2 · 2007/2008
0
0
1000
2000
3000 m 4000
Operational altitude
© Siemens AG 2007
MICROMASTER 440
Selection and ordering data
■ MICROMASTER 440 inverter without filter 2)
CT (constant torque)
Output
Rated input
current 1)
kW
hp
A
Rated output
current
A
VT (variable torque)
Output
Rated input
current 1)
kW
hp
A
Rated output
current
A
MICROMASTER 440 without filter 2)
Frame
Weight, Order No.
size
approx.
(FS)
kg
–
–
–
–
–
–
–
–
–
Mains voltage 1 AC 200 V to 240 V
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
0.16
0.33
0.50
0.75
1.0
1.5
2
3
4
1.8
3.2
4.6
6.2
8.2
11.0
14.4
20.2
35.5
0.9
1.7
2.3
3.0
3.9
5.5
7.4
10.4
13.6
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
A
A
A
A
A
B
B
B
C
1.3
1.3
1.3
1.3
1.3
3.3
3.3
3.3
5.5
6SE6440-2UC11-2AA1
6SE6440-2UC12-5AA1
6SE6440-2UC13-7AA1
6SE6440-2UC15-5AA1
6SE6440-2UC17-5AA1
6SE6440-2UC21-1BA1
6SE6440-2UC21-5BA1
6SE6440-2UC22-2BA1
6SE6440-2UC23-0CA1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
7.5
10
15
20
25
30
40
50
60
75
28.3
34.2
38.0
50.0
62.0
71.0
96.0
114.0
135.0
164.0
22
28
42
54
68
80
104
130
154
178
A
A
A
A
A
B
B
B
C
C
C
D
D
D
E
E
F
F
F
1.3
1.3
1.3
1.3
1.3
3.3
3.3
3.3
5.5
5.5
5.5
16
16
16
20
20
55
55
55
6SE6440-2UC11-2AA1
6SE6440-2UC12-5AA1
6SE6440-2UC13-7AA1
6SE6440-2UC15-5AA1
6SE6440-2UC17-5AA1
6SE6440-2UC21-1BA1
6SE6440-2UC21-5BA1
6SE6440-2UC22-2BA1
6SE6440-2UC23-0CA1
6SE6440-2UC24-0CA1
6SE6440-2UC25-5CA1
6SE6440-2UC27-5DA1
6SE6440-2UC31-1DA1
6SE6440-2UC31-5DA1
6SE6440-2UC31-8EA1
6SE6440-2UC32-2EA1
6SE6440-2UC33-0FA1
6SE6440-2UC33-7FA1
6SE6440-2UC34-5FA1
–
–
–
–
–
–
–
–
10
15
20
25
30
40
50
60
75
100
125
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
17.3
23.1
33.8
37.0
43.0
59.0
72.0
87.0
104.0
139.0
169.0
19
26
32
38
45
62
75
90
110
145
178
A
A
A
A
A
B
B
B
C
C
C
D
D
D
E
E
F
F
F
1.3
1.3
1.3
1.3
1.3
3.3
3.3
3.3
5.5
5.5
5.5
16
16
16
20
20
56
56
56
6SE6440-2UD13-7AA1
6SE6440-2UD15-5AA1
6SE6440-2UD17-5AA1
6SE6440-2UD21-1AA1
6SE6440-2UD21-5AA1
6SE6440-2UD22-2BA1
6SE6440-2UD23-0BA1
6SE6440-2UD24-0BA1
6SE6440-2UD25-5CA1
6SE6440-2UD27-5CA1
6SE6440-2UD31-1CA1
6SE6440-2UD31-5DA1
6SE6440-2UD31-8DA1
6SE6440-2UD32-2DA1
6SE6440-2UD33-0EA1
6SE6440-2UD33-7EA1
6SE6440-2UD34-5FA1
6SE6440-2UD35-5FA1
6SE6440-2UD37-5FA1
Mains operating voltage 3 AC 200 V to 240 V
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
0.16
1.1
0.33
1.9
0.50
2.7
0.75
3.6
1.0
4.7
1.5
6.4
2.0
8.3
3.0
11.7
4.0
15.6
5.0
19.7
7.5
26.5
10
34.2
15
38.0
20
50.0
25
62.0
30
71.0
40
96.0
50
114.0
60
135.0
0.9
1.7
2.3
3.0
3.9
5.5
7.4
10.4
13.6
17.5
22
28
42
54
68
80
104
130
154
–
–
–
–
–
–
–
–
–
5.5
7.5
11.0
15.0
18.5
22
30
37
45
55
Mains operating voltage 3 AC 380 V to 480 V
0.37
0.50
2.2
0.55
0.75
2.8
0.75
1.0
3.7
1.1
1.5
4.9
1.5
2.0
5.9
2.2
3.0
7.5
3.0
4.0
10.0
4.0
5.0
12.8
5.5
7.5
15.6
7.5
10
22.0
11.0
15
23.1
15.0
20
33.8
18.5
25
37.0
22
30
43.0
30
40
59.0
37
50
72.0
45
60
87.0
55
75
104.0
75
100
139.0
1) Supplementary conditions:
Input current at rated operating
point, applicable at short-circuit voltage of the supply
Usc = 2 % with reference to the
inverter rated power and rated
mains operating voltage of
240 V or 400 V without a line
commutating choke.
1.3
1.7
2.2
3.1
4.1
5.9
7.7
10.2
13.2
18.4
26
32
38
45
62
75
90
110
145
–
–
–
–
–
–
–
–
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
2) Acc. to EMC EN 61800-3 generally suited to heavy industrial
applications. For details please
refer to Appendix on page A/4.
Siemens DA 51.2 · 2007/2008
4/9
4
© Siemens AG 2007
MICROMASTER 440
Selection and ordering data
■ MICROMASTER 440 inverter without filter 3) (continued)
CT (constant torque)
Output
kW
Rated input
current
A
hp
MICROMASTER 440 without filter 3)
VT (variable torque)
Rated output
current
A
Output
kW
Rated output
current
A
Frame
size
(FS)
Weight,
approx.
kg
Order No.
hp
Rated input
current
A
150
200
250
300
350
200.0 1)
245.0 1)
297.0 1)
354.0 1)
442.0 1)
205
250
302
370
477
FX
FX
GX
GX
GX
116
116
174
174
174
6SE6440-2UD38-8FA1
6SE6440-2UD41-1FA1
6SE6440-2UD41-3GA1
6SE6440-2UD41-6GA1
6SE6440-2UD42-0GA1
2.0
3.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
120
3.2 2)
4.4 2)
6.9 2)
9.4 2)
12.6 2)
18.1 2)
24.9 2)
30.0 2)
35.0 2)
48.0 2)
58.0 2)
69.0 2)
83.0 2)
113.0 2)
138.0 2)
2.7
3.9
6.1
9
11
17
22
27
32
41
52
62
77
99
125
C
C
C
C
C
C
C
D
D
D
E
E
F
F
F
5.5
5.5
5.5
5.5
5.5
5.5
5.5
16
16
16
20
20
56
56
56
6SE6440-2UE17-5CA1
6SE6440-2UE21-5CA1
6SE6440-2UE22-2CA1
6SE6440-2UE24-0CA1
6SE6440-2UE25-5CA1
6SE6440-2UE27-5CA1
6SE6440-2UE31-1CA1
6SE6440-2UE31-5DA1
6SE6440-2UE31-8DA1
6SE6440-2UE32-2DA1
6SE6440-2UE33-0EA1
6SE6440-2UE33-7EA1
6SE6440-2UE34-5FA1
6SE6440-2UE35-5FA1
6SE6440-2UE37-5FA1
Mains operating voltage 3 AC 380 V to 480 V
90
110
132
160
200
169.0 1)
200.0 1)
245.0 1)
297.0 1)
354.0 1)
125
150
200
250
300
178
205
250
302
370
110
132
160
200
250
Mains operating voltage 3 AC 500 V to 600 V
0.75
1.5
2.2
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
55
75
1.0
2.0
3.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
2.0 2)
3.7 2)
5.3 2)
8.1 2)
11.1 2)
14.4 2)
21.5 2)
24.9 2)
30.0 2)
35.0 2)
48.0 2)
58.0 2)
69.0 2)
83.0 2)
113.0 2)
1.4
2.7
3.9
6.1
9
11
17
22
27
32
41
52
62
77
99
1.5
2.2
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
See Appendix for note on
ordering.
All MICROMASTER 440 inverters are supplied with a Status
Display Panel (SDP). A BOP,
AOP or other options have to
be ordered separately (see
Pages 4/16 to 4/22).
■ Motors for
MICROMASTER 440
Catalog D 81.1 contains selection and ordering data for
motors which are particularly
suitable for operation with the
MICROMASTER 440 inverters
(see Appendix for overview).
This catalog is suitable for IEC
motors. For motors according
to US standards (NEMA)
please refer to Catalog D 81.2
U.S./Canada (see Appendix
for overview) and to:
http://www.sea.siemens.com/
motors
4
1) Supplementary conditions:
Input current at rated operating
point, applicable at short-circuit voltage of the supply
Usc ³ 2.33 % with reference to
the inverter rated power and
rated mains operating voltage
of 400 V.
4/10
2) Supplementary conditions:
Input current at rated operating
point, applicable at short-circuit voltage of the supply
USC = 2 % with reference to the
inverter rated power and rated
mains operating voltage of
500 V without a line commutating choke.
Siemens DA 51.2 · 2007/2008
3) Acc. to EMC EN 61800-3 generally suited to heavy industrial
applications. For details please
refer to Appendix on page A/4.
© Siemens AG 2007
MICROMASTER 440
Selection and ordering data
■ MICROMASTER 440 inverter with internal filter Class A 2)
CT (constant torque)
Output
kW
hp
Rated input
current 1)
A
VT (variable torque)
Rated output
current
A
hp
Rated input
current 1)
A
Rated output
current
A
MICROMASTER 440
with internal filter Class A 2)
Frame
Weight, Order No.
size
approx.
(FS)
kg
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
A
A
A
A
A
B
B
B
C
1.3
1.3
1.3
1.3
1.3
3.4
3.4
3.4
5.7
6SE6440-2AB11-2AA1
6SE6440-2AB12-5AA1
6SE6440-2AB13-7AA1
6SE6440-2AB15-5AA1
6SE6440-2AB17-5AA1
6SE6440-2AB21-1BA1
6SE6440-2AB21-5BA1
6SE6440-2AB22-2BA1
6SE6440-2AB23-0CA1
22
28
C
C
C
5.7
5.7
5.7
6SE6440-2AC23-0CA1
6SE6440-2AC24-0CA1
6SE6440-2AC25-5CA1
B
B
B
C
C
C
D
D
D
E
E
F
F
F
3.4
3.4
3.4
5.7
5.7
5.7
17
17
17
22
22
75
75
75
6SE6440-2AD22-2BA1
6SE6440-2AD23-0BA1
6SE6440-2AD24-0BA1
6SE6440-2AD25-5CA1
6SE6440-2AD27-5CA1
6SE6440-2AD31-1CA1
6SE6440-2AD31-5DA1
6SE6440-2AD31-8DA1
6SE6440-2AD32-2DA1
6SE6440-2AD33-0EA1
6SE6440-2AD33-7EA1
6SE6440-2AD34-5FA1
6SE6440-2AD35-5FA1
6SE6440-2AD37-5FA1
Output
kW
Mains operating voltage 1 AC 200 V to 240 V
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
0.16
0.33
0.50
0.75
1.0
1.5
2
3
4
1.8
3.2
4.6
6.2
8.2
11.0
14.4
20.2
35.5
0.9
1.7
2.3
3.0
3.9
5.5
7.4
10.4
13.6
–
–
–
–
–
–
–
–
–
Mains operating voltage 3 AC 200 V to 240 V
3.0
4.0
5.5
4.0
5.0
7.5
15.6
19.7
26.5
13.6
17.5
22.0
–
–
–
7.5
10.0
5.5
7.5
–
28.3
34.2
Mains operating voltage 3 AC 380 V to 480 V
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
55
75
3.0
4.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
7.5
10.0
12.8
15.6
22.0
23.1
33.8
37.0
43.0
59.0
72.0
87.0
104.0
139.0
5.9
7.7
10.2
13.2
18.4
26
32
38
45
62
75
90
110
145
–
–
–
–
–
–
–
–
–
–
–
–
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
10
15
20
25
30
40
50
60
75
100
125
17.6
23.1
33.8
37.0
43.0
59.0
72.0
87.0
104.0
139.0
169.0
19
26
32
38
45
62
75
90
110
145
178
See Appendix for note on ordering.
All MICROMASTER 440 inverters are supplied with a Status
Display Panel (SDP). A BOP,
AOP or other options have to
be ordered separately (see
Pages 4/16 to 4/22).
■ Motors for
MICROMASTER 440
Catalog D 81.1 contains selection and ordering data for motors which are particularly suitable for operation with the
MICROMASTER 440 inverters
(see Appendix for overview).
4
This catalog is suitable for IEC
motors. For motors according
to US standards (NEMA)
please refer to Catalog D 81.2
U.S./Canada (see Appendix
for overview) and to:
http://www.sea.siemens.com/
motors
1) Supplementary conditions:
Input current at rated operating
point, applicable at short-circuit voltage of the supply
Usc = 2 % with reference to the
inverter rated power and rated
mains operating voltage of
240 V or 400 V without a line
commutating choke.
2) Use of MICROMASTER inverters with internal filter is not permissible on non-grounded
mains supplies.
Siemens DA 51.2 · 2007/2008
4/11
© Siemens AG 2007
MICROMASTER 440
Options
Variant dependent options
■ Overview
EMC filter, Class A
Filter for inverters without an
internal filter for
• 3 AC 200 V to 240 V,
frame sizes A and B
• 3 AC 380 V to 480 V,
frame size A, FX, GX
Filters for frame sizes FX and
GX are only permitted to be
used in combination with a line
commutating choke.
All other inverters with the exception of inverters for 500 V
to 600 V can be supplied with
an internal Class A filter.
The requirements are fulfilled
using shielded cables with a
max. length of 25 m.
EMC filter, Class B
Filter for inverters without an
internal filter for
• 3 AC 200 V to 240 V,
frame sizes A and B
• 3 AC 380 V to 480 V,
frame size A.
The requirements are fulfilled
using shielded cables with a
max. length of 25 m.
For inverters 15 kW to 75 kW
without filters, EMC filters of
Class B from Schaffner can be
used.
With this filter, the inverter
complies with the emission
standard EN 55 011, Class B
for conducted interference
emissions.
Additional EMC filter,
Class B
Available for inverters with an
internal Class A EMC filter,
frame sizes A, B and C.
The requirements are fulfilled
using shielded cables with a
max. length of 25 m.
With this filter, the inverter
complies with the emission
standard EN 55 011, Class B
for conducted interference
emissions.
Filter Class B with low
leakage currents
EMC filter for 1 AC 200 V to
240 V inverters, frame sizes A
and B, without an internal EMC
filter Class A.
With this filter, the inverter
complies with the emission
standard EN 55 011, Class B
for conducted interference
emissions. The leakage currents are reduced to
< 3.5 mA.
Leakage currents:
The leakage currents of the inverters with/without filter (internal/external) may exceed
30 mA. Typical values in practice are between 10 mA and
50 mA. The exact values depend on the design, environment and cable lengths. Interference-free operation with
residual current operated devices with a trigger value of
30 mA cannot be guaranteed.
However, operation with residual current circuit-breakers
with a trigger value of 300 mA
is possible. Please refer to the
Instruction Manual for details.
LC filter and sinusoidal filter
The LC filter/sinusoidal filter
limits the rate of rise of voltage
and the capacitive charge/
discharge currents which usually occur with inverter operation. This means that much
longer shielded motor cables
are possible when using LC filters/sinusoidal filters and the
service life of the motor
achieves values similar to
those with direct mains operation. Use of an output choke
isn’t required with that.
The requirements are fulfilled
using shielded cables with a
max. length of 5 m.
The requirements are fulfilled
using shielded cables with a
max. length of 25 m to 50 m
(depending on the type, details on request).
■ Technical data
4
LC filter and sinusoidal filter
Mains voltage
Current (at 40 °C/50 °C)
For frame size A (0.37 to 1.5 kW)
For frame size B (2.2 to 4 kW)
For frame size C (0.75 to 4 kW)
For frame size C (5.5 to 11 kW)
For frame size D (15 kW)
For frame size D (18.5 kW)
For frame size D (22 kW)
For frame size E (30 kW)
For frame size E (37 kW)
For frame size F (45 kW)
For frame size F (55 kW)
For frame size F (75 kW)
Current (at 40 °C/55 °C)
For frame size FX (90 kW and 110 kW)
For frame size GX (132 kW)
For frame size GX (160 kW)
For frame size GX (200 kW)
4/12
Siemens DA 51.2 · 2007/2008
3 AC 380 V to 480 V
3 AC 500 V to 600 V
4.5 A/4.1 A
11.2 A/10.2 A
–
32.6 A/26 A
38.8 A/32 A
45.9 A/38 A
63.2 A/45 A
76.5 A/62 A
112.2 A/90 A
112.2 A/90 A
147.9 A/110 A
181.6 A/145 A
–
–
9.0 A/6.1 A
22.4 A/17 A
27.5 A/22 A
32.6 A/27 A
41.8 A/32 A
53 A/41 A
63.2 A/52 A
78.5 A/62 A
101 A/77 A
127.5 A/99 A
225 A/191 A
276 A/235 A
333 A/283 A
408 A/347 A
–
–
–
–
Please note when using
LC filters/sinusoidal filters:
• Only V/f, FCC control
permissible
• Please observe the derating
of 15 % when selecting the
appropriate inverter
• Operation only permissible
with 4 kHz pulse frequency
Note: Please observe derating for frame sizes FX and
GX.
• The output frequency is
limited to 150 Hz
• Operation and commissioning only with connected motor as the LC filter/sinusoidal
filter is not idling-proof!
The LC filters/sinusoidal filters
can be used for all MICROMASTER 440 inverters of
frame sizes A to GX.
• Frame sizes D to F:
The LC filters, frame sizes D
to F, are designed for
mounting upright in the control cabinet. Due to leakage
flux lines caused by physical
sources, a minimum distance of 50 mm to adjacent
modules and metal parts is
recommended.
• Frame sizes FX and GX:
The sinusoidal filters, frame
sizes FX and GX, are designed for mounting upright
in the control cabinet. Due to
leakage flux lines caused by
physical sources, a minimum distance of 100 mm to
adjacent modules and metal
parts is recommended.
© Siemens AG 2007
MICROMASTER 440
Options
Variant dependent options
■ Technical data (continued)
LC filter and sinusoidal filter
Limiting of motor overvoltage
dV/dt limiting
Pulse frequency
Max. motor frequency
Max. permissible motor cable lengths
For frame sizes A to F
For frame sizes FX and GX
£ 1078 V
£ 500 V/ms
4 kHz
150 Hz
shielded
unshielded
shielded
unshielded
Insulation strength
Electromagnetic compatibility
For frame sizes A to F
Up to 200 m motor cable length with emissions to Class A according to EN 55 011
in conjunction with filtered inverters and unshielded cables
Up to 150 m motor cable length with emissions to Class A according to EN 55 011
in conjunction with filtered inverters and unshielded cables
CE according to the low-voltage directive 73/23/EEC
cUL E 219022
EN 60 068-2-31
95 % humidity, non-condensing
For frame sizes FX and GX
Conformity
Approvals
Strain resistance
Humidity
Degree of protection
For frame sizes A to C
For frame sizes D to F
For frame sizes FX and GX
Insulation class
Temperature range
For frame sizes A to F
For frame sizes FX and GX
IP20 (to EN 60 529)
IP00/IP20 (to EN 60 529 with terminal covers)
IP00
H (180 °C)
Operation –10 °C to +40 °C (+14 °F to +104 °F)
to +50 °C (to +122 °F)
Storage –25 °C to +70 °C (–13 °F to +158 °F)
Operation –10 °C to +40 °C (+14 °F to +104 °F)
to +55 °C (to +131 °F)
Storage –40 °C to +70 °C (–40 °F to +158 °F)
Installation altitude
For frame sizes A to C
Up to 2000 m:
2000 to 4000 m:
Up to 1000 m:
1000 to 4000 m:
Up to 2000 m:
2000 to 4000 m:
For frame sizes D to F
For frame sizes FX and GX
Mounting position
For frame sizes A to C
For frame sizes D to F, FX and GX
Ventilation clearances
For frame sizes A to C
For frame sizes D to F,
FX and GX
Connection system
For frame sizes FX and GX
Weight, approx.
For frame size A
For frame size B
For frame size C
For frame size D
For frame size E
For frame size F
For frame size FX
For frame size GX
100 % Pn
80 % Pn
100 % Pn
85 % Pn
100 % Pn
62.5 % Pn
100 % Pn
12.5 % derating for each 1000 m
100 % Pn
7.5 % derating for each 1000 m
Footprint or suspended
upright
Top 100 mm
Bottom 100 mm
Side 100 mm
Top
Side
Input, litz wire or terminal
Output, terminals
Torque for
conductor connections
For frame sizes A to C
For frame sizes D to F
200 m
300 m
300 m
450 m
Overvoltage category III to VDE 0110
100 mm
100 mm
1U1, 1V1, 1W1
1U2, 1V2, 1W2
Terminal cross-section Torque
–
16 mm2
35 mm2
50 mm2
95 mm2
150 mm2
–
4
1.5 Nm to 1.8 Nm
2.0 Nm to 4.0 Nm
2.5 Nm to 5.0 Nm
3.0 Nm to 6.0 Nm
6.0 Nm to 12.0 Nm
10.0 Nm to 20.0 Nm
14.0 Nm to 31.0 Nm
7 kg
11 kg
8.5 kg to 29 kg
21 kg to 42 kg
49.5 kg to 67 kg
67 kg to 126 kg
135 kg
138 kg to 208 kg
Siemens DA 51.2 · 2007/2008
4/13
© Siemens AG 2007
MICROMASTER 440
Options
Variant dependent options
■ Overview
Line commutating choke
Line commutating chokes are
used to smooth voltage peaks
or to bridge commutating
dips. In addition, line commutating chokes reduce the effects of harmonics on the inverter and the power supply. If
the line impedance is < 1 %, a
line commutating choke must
be used in order to reduce the
current peaks.
In line with EN 61 000-3-2 regulations “Limits for harmonic
currents with device input current £16 A per phase”, there
are special aspects for drives
with 250 W to 550 W and 230 V
single-phase supplies which
can be used in non-industrial
applications (1st environment).
For devices with 250 W and
350 W, it is necessary either to
fit the recommended input
chokes or to apply to the
power utility company for
authorization to connect the
devices to the public power
supply.
No limits are currently defined
in the EN 61 000-3-2 standard
for professionally used devices with a connected load
>1 kW which means that the
inverters with an output power
³ 0.75 kW comply with the
EN 61 000-3-2 standard.
However, in accordance with
the regulations of EN 61000-312 “Limits for harmonic currents > 16 A and £ 75 A per
phase” an approval is necessary from the power supplier
for drives that are intended to
be connected to the public
low-voltage network. Please
refer to the Operating Instructions for the values of the harmonic currents.
Output choke
Output chokes can be supplied for reducing the capacitive compensation currents
and dV/dt in the case of motor
cables >50 m (shielded) or
>100 m (unshielded).
For max. permissible cable
lengths, see the Technical
Data.
Brake resistors
The brake resistors are designed for use with the
MICROMASTER 440 inverter
series, frame sizes A to F, with
internal brake chopper and
enable loads with a large moment of inertia to be braked
quickly. During braking of the
motor and the load, excess
energy is fed back to the inverter. This causes the voltage
to rise in the DC link. The inverter transfers the excess energy to the externally mounted
braking resistor.
For MICROMASTER 440 inverters of frame sizes FX and
GX, external SIMOVERT
MASTERDRIVES brake units
and the appropriate brake resistors can be used (see
Catalog DA 65.10).
Gland plate
Gland plates are available for
inverters of frame sizes A, B
and C. All the other frame sizes have the shield connection
for the control cable integrated in the inverter.
The shield for the power cable
has to be connected externally (e.g. in the control cabinet).
Exception: Inverters of frame
sizes D and E and frame size
F with integrated class A filter.
In this case the shield connection is integrated in the inverter.
The gland plate enables the
shields of the power and control cables to be terminated
ensuring optimum EMC performance.
■ Technical data
Max. permissible cable
lengths from the motor to
the inverter when using
output chokes
Note:
Operation up to 150 Hz output
frequency only!
The following table shows the
maximum permissible cable
lengths from the motor to the
inverter when using output
chokes.
4
Frame size
Output choke
(FS)
A
A
B
C
C
D to F
FX
FX
GX
GX
GX
Type
6SE6400-3TC00-4AD3
6SE6400-3TC00-4AD2
6SE6400-3TC01-0BD3
6SE6400-3TC03-2CD3
6SE6400-3TC01-8CE3
6SE6400-3TC. .-. . . .
6SL3000-2BE32-1AA0
6SL3000-2BE32-6AA0
6SL3000-2BE33-2AA0
6SL3000-2BE33-8AA0
6SL3000-2BE35-0AA0
4/14
Siemens DA 51.2 · 2007/2008
Max. permissible motor cable lengths (shielded/unshielded)
for a mains voltage of
200 V to 240 V ± 10 %
380 V to 400 V ± 10 %
401 V to 480 V ± 10 %
200 m/300 m
–
–
–
150 m/225 m
100 m/150 m
200 m/300 m
150 m/225 m
100 m/150 m
200 m/300 m
200 m/300 m
100 m/150 m
–
–
–
200 m/300 m
200 m/300 m
200 m/300 m
–
300 m/450 m
300 m/450 m
–
300 m/450 m
300 m/450 m
–
300 m/450 m
300 m/450 m
–
300 m/450 m
300 m/450 m
–
300 m/450 m
300 m/450 m
500 V to 600 V ± 10 %
–
–
–
–
100 m/150 m
200 m/300 m
–
–
–
–
–
© Siemens AG 2007
MICROMASTER 440
Options
Variant dependent options
■ Design
■ A maximum of two footprint
■ The EMC filter must be
components plus inverter
are permissible.
■ If an LC filter is used, it
must, if possible, be mounted directly on the wall of
the control cabinet due to
weight reasons.
If an LC filter of frame size C
is used, therefore, only one
footprint component is permissible. If a line choke and
LC filter are used, the line
choke must be located on
the left of the inverter.
Required distance between
line choke and inverter:
75 mm.
mounted directly below the
frequency inverter if possible.
■ If mounted on the side, the
line-side components are to
be mounted to the left of the
frequency inverter whereas
the output-side components are to be mounted to
the right of the frequency inverter.
■ If a braking resistor is used,
it must, if possible, be
mounted directly on the
wall of the control cabinet
due to reasons relating to
temperature increases.
G_DA51_EN_05016d
General installation instructions
Position 2
Position 1
Example of installation with frequency inverter,
EMC filter (position 1) and line choke (position 2)
Availability of the options as footprint components
Line commutating choke
EMC filter
LC filter
Output choke
Braking resistor
Frame size
A
✓
✓
✓
✓
✓
B
✓
✓
✓
✓
✓
C
✓
✓
✓
✓
D
✓
E
✓
F
G
FX
GX
Recommended combinations of inverters and options
Frequency inverter
Frame size
Footprint
Position 1
Position 2
Mounted on side
To the left of the inverter
(for line-side components)
A and B
EMC filter
Line commutating choke
–
Output choke or
LC filter
Braking resistor
–
–
–
–
–
–
C
EMC filter or
Line commutating choke
EMC filter or
Line commutating choke
EMC filter or
Line commutating choke or
Braking resistor
EMC filter
To the right of the inverter
(for output-side components)
Output choke and/or
Braking resistor
Braking resistor
Line commutating choke
–
EMC filter or
Line commutating choke
LC filter
Output choke
–
Output choke and/or
Braking resistor
Braking resistor
–
D and E
Line commutating choke
–
EMC filter and/or
Line commutating choke
EMC filter
F, G, FX and GX
–
–
EMC filter and/or
Line commutating choke
Braking resistor
Output choke or
LC filter and/or
Braking resistor
Output choke or
LC filter and/or
Braking resistor
Siemens DA 51.2 · 2007/2008
4/15
4
© Siemens AG 2007
MICROMASTER 440
Options
Variant dependent options
■ Selection and ordering data
The options listed here (filters,
chokes, brake resistors, gland
plates, fuses and circuitbreakers) must be selected to
match the respective inverter.
Mains
voltage
1 AC 200 V
to 240 V
3 AC 200 V
to 240 V
3 AC 380 V
to 480 V
4
3 AC 500 V
to 600 V
4/16
Output (CT)
kW
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
110
132
160
200
0.75
1.5
2.2
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
55
75
hp
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
10
15
20
25
30
40
50
60
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
125
150
200
250
300
1.0
2.0
3.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
The inverter and the associated options have the same voltage ratings. Alternatively fuses and circuit-breakers can be
provided. Both provide short
Inverter
without filter
6SE6440-2UC11-2AA1
6SE6440-2UC12-5AA1
6SE6440-2UC13-7AA1
6SE6440-2UC15-5AA1
6SE6440-2UC17-5AA1
6SE6440-2UC21-1BA1
6SE6440-2UC21-5BA1
6SE6440-2UC22-2BA1
6SE6440-2UC23-0CA1
6SE6440-2UC11-2AA1
6SE6440-2UC12-5AA1
6SE6440-2UC13-7AA1
6SE6440-2UC15-5AA1
6SE6440-2UC17-5AA1
6SE6440-2UC21-1BA1
6SE6440-2UC21-5BA1
6SE6440-2UC22-2BA1
6SE6440-2UC23-0CA1
6SE6440-2UC24-0CA1
6SE6440-2UC25-5CA1
6SE6440-2UC27-5DA1
6SE6440-2UC31-1DA1
6SE6440-2UC31-5DA1
6SE6440-2UC31-8EA1
6SE6440-2UC32-2EA1
6SE6440-2UC33-0FA1
6SE6440-2UC33-7FA1
6SE6440-2UC34-5FA1
6SE6440-2UD13-7AA1
6SE6440-2UD15-5AA1
6SE6440-2UD17-5AA1
6SE6440-2UD21-1AA1
6SE6440-2UD21-5AA1
6SE6440-2UD22-2BA1
6SE6440-2UD23-0BA1
6SE6440-2UD24-0BA1
6SE6440-2UD25-5CA1
6SE6440-2UD27-5CA1
6SE6440-2UD31-1CA1
6SE6440-2UD31-5DA1
6SE6440-2UD31-8DA1
6SE6440-2UD32-2DA1
6SE6440-2UD33-0EA1
6SE6440-2UD33-7EA1
6SE6440-2UD34-5FA1
6SE6440-2UD35-5FA1
6SE6440-2UD37-5FA1
6SE6440-2UD38-8FA1
6SE6440-2UD41-1FA1
6SE6440-2UD41-3GA1
6SE6440-2UD41-6GA1
6SE6440-2UD42-0GA1
6SE6440-2UE17-5CA1
6SE6440-2UE21-5CA1
6SE6440-2UE22-2CA1
6SE6440-2UE24-0CA1
6SE6440-2UE25-5CA1
6SE6440-2UE27-5CA1
6SE6440-2UE31-1CA1
6SE6440-2UE31-5DA1
6SE6440-2UE31-8DA1
6SE6440-2UE32-2DA1
6SE6440-2UE33-0EA1
6SE6440-2UE33-7EA1
6SE6440-2UE34-5FA1
6SE6440-2UE35-5FA1
6SE6440-2UE37-5FA1
Siemens DA 51.2 · 2007/2008
circuit protection of the inverter supply line and the inverter.
A semiconductor protection of
the inverter with the suggested 3NA... fuses and the
Order No. of the options
EMC filter,
Class A
–
–
–
–
–
–
–
–
–
6SE6400-2FA00-6AD0
3RV.../3VL... circuit-breakers
is not envisaged.
*) Must be used in combination
with a line commutating choke.
EMC filter,
Class B
6SE6400-2FL01-0AB0
with low leakage currents
Line commutating
choke
6SE6400-3CC00-4AB3
6SE6400-3CC01-0AB3
6SE6400-2FL02-6BB0
with low leakage currents
6SE6400-3CC02-6BB3
–
6SE6400-2FB00-6AD0
6SE6400-3CC03-5CB3
6SE6400-3CC00-3AC3
6SE6400-3CC00-5AC3
6SE6400-2FA01-4BC0
6SE6400-2FB01-4BC0
6SE6400-3CC00-8BC3
6SE6400-3CC01-4BD3
–
–
–
–
–
–
–
–
–
–
–
6SE6400-2FA00-6AD0
–
–
–
–
–
–
–
–
–
–
–
6SE6400-2FB00-6AD0
6SE6400-3CC01-7CC3
6SE6400-3CC03-5CD3
6SE6400-3CC05-2DD0
6SE6400-3CC08-8EC0
6SE6400-3CC11-7FD0
6SE6400-3CC00-2AD3
6SE6400-3CC00-4AD3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
6SL3000-0BE32-5AA0 *)
6SL3000-0BE34-4AA0 *)
6SL3000-0BE36-0AA0 *)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
EMC filter,
Class B,
available from Schaffner
6SE6400-3CC00-6AD3
6SE6400-3CC01-0BD3
6SE6400-3CC01-4BD3
6SE6400-3CC02-2CD3
6SE6400-3CC03-5CD3
6SE6400-3CC04-4DD0
6SE6400-3CC05-2DD0
6SE6400-3CC08-3ED0
6SE6400-3CC11-2FD0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
6SE6400-3CC11-7FD0
6SL3000-0CE32-3AA0
6SL3000-0CE32-8AA0
6SL3000-0CE33-3AA0
6SL3000-0CE35-1AA0
6SE6400-3CC00-4CE3
6SE6400-3CC00-8CE3
6SE6400-3CC02-4CE3
6SE6400-3CC04-4DD0
6SE6400-3CC08-3ED0
6SE6400-3CC11-2FD0
© Siemens AG 2007
MICROMASTER 440
Options
Variant dependent options
■ Selection and ordering data (continued)
All options are certified to
u, except fuses.
The 3NE1 fuses are u-listed
(equivalent to U).
Mains
voltage
1 AC 200 V
to 240 V
3 AC 200 V
to 240 V
3 AC 380 V
to 480 V
3 AC 500 V
to 600 V
Output (CT)
kW
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
110
132
160
200
0.75
1.5
2.2
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
55
75
hp
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
10
15
20
25
30
40
50
60
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
125
150
200
250
300
1.0
2.0
3.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
Additional information on
the listed fuses and circuitbreakers can be found in
Catalogs LV 1 and LV 1 T.
Inverter
without filter
Order No. of the options
LC/sinusoidal filter
6SE6440-2UC11-2AA1
6SE6440-2UC12-5AA1
6SE6440-2UC13-7AA1
6SE6440-2UC15-5AA1
6SE6440-2UC17-5AA1
6SE6440-2UC21-1BA1
6SE6440-2UC21-5BA1
6SE6440-2UC22-2BA1
6SE6440-2UC23-0CA1
6SE6440-2UC11-2AA1
6SE6440-2UC12-5AA1
6SE6440-2UC13-7AA1
6SE6440-2UC15-5AA1
6SE6440-2UC17-5AA1
6SE6440-2UC21-1BA1
6SE6440-2UC21-5BA1
6SE6440-2UC22-2BA1
6SE6440-2UC23-0CA1
6SE6440-2UC24-0CA1
6SE6440-2UC25-5CA1
6SE6440-2UC27-5DA1
6SE6440-2UC31-1DA1
6SE6440-2UC31-5DA1
6SE6440-2UC31-8EA1
6SE6440-2UC32-2EA1
6SE6440-2UC33-0FA1
6SE6440-2UC33-7FA1
6SE6440-2UC34-5FA1
6SE6440-2UD13-7AA1
6SE6440-2UD15-5AA1
6SE6440-2UD17-5AA1
6SE6440-2UD21-1AA1
6SE6440-2UD21-5AA1
6SE6440-2UD22-2BA1
6SE6440-2UD23-0BA1
6SE6440-2UD24-0BA1
6SE6440-2UD25-5CA1
6SE6440-2UD27-5CA1
6SE6440-2UD31-1CA1
6SE6440-2UD31-5DA1
6SE6440-2UD31-8DA1
6SE6440-2UD32-2DA1
6SE6440-2UD33-0EA1
6SE6440-2UD33-7EA1
6SE6440-2UD34-5FA1
6SE6440-2UD35-5FA1
6SE6440-2UD37-5FA1
6SE6440-2UD38-8FA1
6SE6440-2UD41-1FA1
6SE6440-2UD41-3GA1
6SE6440-2UD41-6GA1
6SE6440-2UD42-0GA1
6SE6440-2UE17-5CA1
6SE6440-2UE21-5CA1
6SE6440-2UE22-2CA1
6SE6440-2UE24-0CA1
6SE6440-2UE25-5CA1
6SE6440-2UE27-5CA1
6SE6440-2UE31-1CA1
6SE6440-2UE31-5DA1
6SE6440-2UE31-8DA1
6SE6440-2UE32-2DA1
6SE6440-2UE33-0EA1
6SE6440-2UE33-7EA1
6SE6440-2UE34-5FA1
6SE6440-2UE35-5FA1
6SE6440-2UE37-5FA1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
6SE6400-3TD00-4AD0
Output choke
Brake resistors
6SE6400-3TC00-4AD3
6SE6400-4BC05-0AA0
6SE6400-3TC01-0BD3
6SE6400-4BC11-2BA0
6SE6400-3TC03-2CD3
6SE6400-3TC00-4AD3
6SE6400-4BC12-5CA0
6SE6400-4BC05-0AA0
6SE6400-3TC01-0BD3
6SE6400-4BC11-2BA0
6SE6400-3TC03-2CD3
6SE6400-4BC12-5CA0
6SE6400-4BC13-0CA0
6SE6400-3TC05-4DD0
6SE6400-4BC18-0DA0
6SE6400-3TC08-0ED0
6SE6400-4BC21-2EA0
6SE6400-3TC15-4FD0
6SE6400-4BC22-5FA0
6SE6400-3TC00-4AD2
6SE6400-4BD11-0AA0
6SE6400-3TD01-0BD0
6SE6400-3TC01-0BD3
6SE6400-4BD12-0BA0
6SE6400-3TD03-2CD0
6SE6400-3TC03-2CD3
6SE6400-4BD16-5CA0
6SE6400-3TD03-7DD0
6SE6400-3TD04-8DD0
6SE6400-3TD06-1DD0
6SE6400-3TD07-2ED0
6SE6400-3TD11-5FD0
6SE6400-3TC05-4DD0
6SE6400-3TC03-8DD0
6SE6400-3TC05-4DD0
6SE6400-3TC08-0ED0
6SE6400-3TC07-5ED0
6SE6400-3TC14-5FD0
6SE6400-3TC15-4FD0
6SE6400-3TC14-5FD0
6SL3000-2BE32-1AA0
6SL3000-2BE32-6AA0
6SL3000-2BE33-2AA0
6SL3000-2BE33-8AA0
6SL3000-2BE35-0AA0
6SE6400-3TC01-8CE3
6SE6400-4BD21-2DA0
6SE6400-3TD15-0FD0
6SE6400-3TD18-0FD0
6SL3000-2CE32-3AA0
6SL3000-2CE32-8AA0
6SL3000-2CE33-3AA0
6SL3000-2CE34-1AA0
6SE6400-3TD01-0CE0
6SE6400-4BD22-2EA0
6SE6400-4BD24-0FA0
–
–
–
–
–
6SE6400-4BE14-5CA0
6SE6400-3TD02-3CE0
6SE6400-4BE16-5CA0
6SE6400-3TD02-3DE0
6SE6400-3TD03-2DE0
6SE6400-3TD03-7DE0
6SE6400-3TD04-8EE0
6SE6400-3TD06-1EE0
6SE6400-3TD07-1FE0
6SE6400-3TD10-0FE0
6SE6400-3TD11-5FE0
6SE6400-3TC03-2DE0
6SE6400-4BE21-3DA0
6SE6400-3TC06-2FE0
6SE6400-4BE21-8EA0
6SE6400-4BE24-2FA0
6SE6400-3TC08-8FE0
Siemens DA 51.2 · 2007/2008
4/17
4
© Siemens AG 2007
MICROMASTER 440
Options
Variant dependent options
■ Selection and ordering data (continued)
l Use in America requires u-listed
fuses such as the Class NON/NOS
range from Bussmann.
Mains
voltage
1 AC 200 V
to 240 V
3 AC 200 V
to 240 V
3 AC 380 V
to 480 V
4
3 AC 500 V
to 600 V
4/18
Output (CT)
Inverter
without filter
Order No. of options
Gland plate
6SE6400-0GP00-0AA0
kW
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
hp
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
10
15
20
25
30
40
50
60
6SE6440-2UC11-2AA1
6SE6440-2UC12-5AA1
6SE6440-2UC13-7AA1
6SE6440-2UC15-5AA1
6SE6440-2UC17-5AA1
6SE6440-2UC21-1BA1
6SE6440-2UC21-5BA1
6SE6440-2UC22-2BA1
6SE6440-2UC23-0CA1
6SE6440-2UC11-2AA1
6SE6440-2UC12-5AA1
6SE6440-2UC13-7AA1
6SE6440-2UC15-5AA1
6SE6440-2UC17-5AA1
6SE6440-2UC21-1BA1
6SE6440-2UC21-5BA1
6SE6440-2UC22-2BA1
6SE6440-2UC23-0CA1
6SE6440-2UC24-0CA1
6SE6440-2UC25-5CA1
6SE6440-2UC27-5DA1
6SE6440-2UC31-1DA1
6SE6440-2UC31-5DA1
6SE6440-2UC31-8EA1
6SE6440-2UC32-2EA1
6SE6440-2UC33-0FA1
6SE6440-2UC33-7FA1
6SE6440-2UC34-5FA1
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
55
75
90
110
132
160
200
0.75
1.5
2.2
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
55
75
0.50
0.75
1.0
1.5
2.0
3.0
4.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
125
150
200
250
300
1.0
2.0
3.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
6SE6440-2UD13-7AA1
6SE6440-2UD15-5AA1
6SE6440-2UD17-5AA1
6SE6440-2UD21-1AA1
6SE6440-2UD21-5AA1
6SE6440-2UD22-2BA1
6SE6440-2UD23-0BA1
6SE6440-2UD24-0BA1
6SE6440-2UD25-5CA1
6SE6440-2UD27-5CA1
6SE6440-2UD31-1CA1
6SE6440-2UD31-5DA1
6SE6440-2UD31-8DA1
6SE6440-2UD32-2DA1
6SE6440-2UD33-0EA1
6SE6440-2UD33-7EA1
6SE6440-2UD34-5FA1
6SE6440-2UD35-5FA1
6SE6440-2UD37-5FA1
6SE6440-2UD38-8FA1
6SE6440-2UD41-1FA1
6SE6440-2UD41-3GA1
6SE6440-2UD41-6GA1
6SE6440-2UD42-0GA1
6SE6440-2UE17-5CA1
6SE6440-2UE21-5CA1
6SE6440-2UE22-2CA1
6SE6440-2UE24-0CA1
6SE6440-2UE25-5CA1
6SE6440-2UE27-5CA1
6SE6440-2UE31-1CA1
6SE6440-2UE31-5DA1
6SE6440-2UE31-8DA1
6SE6440-2UE32-2DA1
6SE6440-2UE33-0EA1
6SE6440-2UE33-7EA1
6SE6440-2UE34-5FA1
6SE6440-2UE35-5FA1
6SE6440-2UE37-5FA1
Siemens DA 51.2 · 2007/2008
Fuses (see LV 1)
3NA3
3NE1 (U)
3NA3803
l
3NA3805
6SE6400-0GP00-0BA0
3NA3807
6SE6400-0GP00-0CA0
6SE6400-0GP00-0AA0
3NA3812
3NA3817
3NA3803
l
3NA3805
6SE6400-0GP00-0BA0
3NA3807
3NA3810
6SE6400-0GP00-0CA0
3NA3812
3NA3814
Integrated as standard for shield 3NA3820
connection of the control cable
3NA3824
and the power cable.
3NA3830
3NA3832
Integrated as standard for shield 3NA3140
connection of the control cable. 3NA3142
The shield of the power cable
3NA3144
has to be connected externally
(e.g. in the control cabinet).
6SE6400-0GP00-0AA0
3NA3803
6SE6400-0GP00-0BA0
3NE1817-0
3NE1820-0
3NE1021-0
3NE1022-0
3NE1225-0
3NE1225-0
3NE1227-0
l
3NA3805
3NA3807
6SE6400-0GP00-0CA0
Integrated as standard for shield
connection of the control cable
and the power cable.
Integrated as standard for shield
connection of the control cable.
The shield of the power cable
has to be connected externally
(e.g. in the control cabinet).
6SE6400-0GP00-0CA0
3NA3812
3NA3814
3NA3820
3NA3822
3NA3824
3NA3830
3NA3832
3NA3836
3NA3140
3NA3144
–
–
–
–
–
3NA3803-6
3NE1817-0
3NE1818-0
3NE1820-0
3NE1021-0
3NE1022-0
3NE1224-0
3NE1225-0
3NE1227-0
3NE1230-0
3NE1332-0
3NE1333-0
3NE1435-0
l
3NA3805-6
Integrated as standard for shield
connection of the control cable
and the power cable.
Integrated as standard for shield
connection of the control cable.
The shield of the power cable
has to be connected externally
(e.g. in the control cabinet).
3NA3810-6
3NA3812-6
3NA3814-6
3NA3820-6
3NA3822-6
3NA3824-6
3NE1803-0
3NE1817-0
3NE1818-0
3NE1820-0
3NA3132-6
3NA3136-6
3NE1022-0
3NE1224-0
Circuit-breaker
(see Catalog LV 1)
3RV1021-1EA10
3RV1021-1HA10
3RV1021-1JA10
3RV1021-1KA10
3RV1021-4AA10
3RV1021-4DA10
3RV1031-4EA10
3RV1031-4FA10
3RV1041-4JA10
3RV1021-1BA10
3RV1021-1DA10
3RV1021-1FA10
3RV1021-1GA10
3RV1021-1HA10
3RV1021-1KA10
3RV1021-4AA10
3RV1021-4CA10
3RV1031-4EA10
3RV1031-4FA10
3RV1031-4HA10
3RV1042-4JA10
3RV1042-4LA10
3VL1712- . DD33- . . . .
3VL1716- . DD33- . . . .
3VL3725- . DC36- . . . .
3VL4731- . DC36- . . . .
3RV1021-1CA10
3RV1021-1DA10
3RV1021-1FA10
3RV1021-1GA10
3RV1021-1JA10
3RV1021-1KA10
3RV1021-4AA10
3RV1021-4BA10
3RV1031-4EA10
3RV1031-4FA10
3RV1031-4HA10
3RV1042-4KA10
3RV1042-4MA10
3VL1712- . DD33- . . . .
3VL1716- . DD33- . . . .
3VL3720- . DC36- . . . .
3VL3725- . DC36- . . . .
3VL3725- . DC36- . . . .
3VL4731- . DC36- . . . .
3VL4740- . DC36- . . . .
3VL5750- . DC36- . . . .
3RV1021-1EA10
3RV1021-1GA10
3RV1021-1JA10
3RV1021-4AA10
3RV1021-4BA10
3RV1021-4DA10
3RV1031-4FA10
3RV1031-4HA10
3RV1042-4JA10
3RV1042-4KA10
3RV1042-4MA10
3VL1712- . DD33- . . . .
3VL1716- . DD33- . . . .
3VL3720- . DC36- . . . .
3VL3725- . DC36- . . . .
© Siemens AG 2007
MICROMASTER 440
Options
Variant dependent options
■ Selection and ordering data (continued)
Mains
voltage
1 AC 200 V
to 240 V
3 AC 200 V
to 240 V
3 AC 380 V
to 480 V
Mains
voltage
1 AC 200 V
to 240 V
3 AC 200 V
to 240 V
3 AC 380 V
to 480 V
Output (CT)
kW
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
3.0
4.0
5.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
55
75
hp
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
4.0
5.0
7.5
3.0
4.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
Output (CT)
kW
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
3.0
4.0
5.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
55
75
hp
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
4.0
5.0
7.5
3.0
4.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
Inverter
with internal filter
Class A
6SE6440-2AB11-2AA1
6SE6440-2AB12-5AA1
6SE6440-2AB13-7AA1
6SE6440-2AB15-5AA1
6SE6440-2AB17-5AA1
6SE6440-2AB21-1BA1
6SE6440-2AB21-5BA1
6SE6440-2AB22-2BA1
6SE6440-2AB23-0CA1
6SE6440-2AC23-0CA1
6SE6440-2AC24-0CA1
6SE6440-2AC25-5CA1
6SE6440-2AD22-2BA1
6SE6440-2AD23-0BA1
6SE6440-2AD24-0BA1
6SE6440-2AD25-5CA1
6SE6440-2AD27-5CA1
6SE6440-2AD31-1CA1
6SE6440-2AD31-5DA1
6SE6440-2AD31-8DA1
6SE6440-2AD32-2DA1
6SE6440-2AD33-0EA1
6SE6440-2AD33-7EA1
6SE6440-2AD34-5FA1
6SE6440-2AD35-5FA1
6SE6440-2AD37-5FA1
Inverter
with internal filter
Class A
6SE6440-2AB11-2AA1
6SE6440-2AB12-5AA1
6SE6440-2AB13-7AA1
6SE6440-2AB15-5AA1
6SE6440-2AB17-5AA1
6SE6440-2AB21-1BA1
6SE6440-2AB21-5BA1
6SE6440-2AB22-2BA1
6SE6440-2AB23-0CA1
6SE6440-2AC23-0CA1
6SE6440-2AC24-0CA1
6SE6440-2AC25-5CA1
6SE6440-2AD22-2BA1
6SE6440-2AD23-0BA1
6SE6440-2AD24-0BA1
6SE6440-2AD25-5CA1
6SE6440-2AD27-5CA1
6SE6440-2AD31-1CA1
6SE6440-2AD31-5DA1
6SE6440-2AD31-8DA1
6SE6440-2AD32-2DA1
6SE6440-2AD33-0EA1
6SE6440-2AD33-7EA1
6SE6440-2AD34-5FA1
6SE6440-2AD35-5FA1
6SE6440-2AD37-5FA1
Order No. of options
Additional EMC filter,
Class B
6SE6400-2FS01-0AB0
Line commutating choke
LC filter
6SE6400-3CC00-4AB3
6SE6400-2FS02-6BB0
6SE6400-3CC02-6BB3
6SE6400-2FS03-5CB0
6SE6400-2FS03-8CD0
6SE6400-3CC03-5CB3
6SE6400-3CC01-7CC3
6SE6400-3CC03-5CD3
6SE6400-2FS01-6BD0
6SE6400-3CC01-0BD3
–
–
–
–
–
–
–
–
–
–
–
–
6SE6400-3TD01-0BD0
6SE6400-2FS03-8CD0
6SE6400-3CC01-4BD3
6SE6400-3CC02-2CD3
6SE6400-3TD03-2CD0
6SE6400-3CC01-0AB3
An inverter without filter
must be selected to satisfy
the EMC requirements of
Class B.
In addition, an appropriate
EMC filter of Class B from
Schaffner is required.
6SE6400-3CC03-5CD3
6SE6400-3CC04-4DD0
6SE6400-3CC05-2DD0
6SE6400-3CC08-3ED0
6SE6400-3TD03-7DD0
6SE6400-3TD04-8DD0
6SE6400-3TD06-1DD0
6SE6400-3TD07-2ED0
6SE6400-3TD11-5FD0
6SE6400-3CC11-2FD0
6SE6400-3CC11-7FD0
6SE6400-3TD15-0FD0
6SE6400-3TD18-0FD0
Order No. of options
Output choke
Brake resistors
Gland plate
6SE6400-3TC00-4AD3
6SE6400-4BC05-0AA0
6SE6400-0GP00-0AA0
6SE6400-3TC01-0BD3
6SE6400-4BC11-2BA0
6SE6400-0GP00-0BA0
6SE6400-3TC03-2CD3
6SE6400-3TC03-2CD3
6SE6400-4BC12-5CA0
6SE6400-4BC12-5CA0
6SE6400-4BC13-0CA0
6SE6400-0GP00-0CA0
6SE6400-0GP00-0CA0
6SE6400-3TC01-0BD3
6SE6400-4BD12-0BA0
6SE6400-0GP00-0BA0
6SE6400-3TC03-2CD3
6SE6400-4BD16-5CA0
6SE6400-0GP00-0CA0
6SE6400-3TC05-4DD0
6SE6400-3TC03-8DD0
6SE6400-3TC05-4DD0
6SE6400-3TC08-0ED0
6SE6400-3TC07-5ED0
6SE6400-3TC14-5FD0
6SE6400-3TC15-4FD0
6SE6400-3TC14-5FD0
6SE6400-4BD21-2DA0
Integrated as standard
for shield connection of
the control cable and
the power cable.
6SE6400-4BD22-2EA0
6SE6400-4BD24-0FA0
Siemens DA 51.2 · 2007/2008
4/19
4
© Siemens AG 2007
MICROMASTER 440
Options
Variant dependent options
■ Selection and ordering data (continued)
Mains
voltage
1 AC 200 V
to 240 V
3 AC 200 V
to 240 V
3 AC 380 V
to 480 V
Output (CT)
kW
0.12
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
3.0
4.0
5.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22
30
37
45
55
75
hp
0.16
0.33
0.50
0.75
1.0
1.5
2.0
3.0
4.0
4.0
5.0
7.5
3.0
4.0
5.0
7.5
10
15
20
25
30
40
50
60
75
100
Inverter
with internal filter
Class A
6SE6440-2AB11-2AA1
6SE6440-2AB12-5AA1
6SE6440-2AB13-7AA1
6SE6440-2AB15-5AA1
6SE6440-2AB17-5AA1
6SE6440-2AB21-1BA1
6SE6440-2AB21-5BA1
6SE6440-2AB22-2BA1
6SE6440-2AB23-0CA1
6SE6440-2AC23-0CA1
6SE6440-2AC24-0CA1
6SE6440-2AC25-5CA1
6SE6440-2AD22-2BA1
6SE6440-2AD23-0BA1
6SE6440-2AD24-0BA1
6SE6440-2AD25-5CA1
6SE6440-2AD27-5CA1
6SE6440-2AD31-1CA1
6SE6440-2AD31-5DA1
6SE6440-2AD31-8DA1
6SE6440-2AD32-2DA1
6SE6440-2AD33-0EA1
6SE6440-2AD33-7EA1
6SE6440-2AD34-5FA1
6SE6440-2AD35-5FA1
6SE6440-2AD37-5FA1
4
4/20
Siemens DA 51.2 · 2007/2008
Order No. of the options
Fuses (see Catalog LV 1)
3NA3
3NE1 (U)
3NA3803
l
3NA3805
3NA3807
3NA3812
3NA3817
3NA3810
3NA3812
3NA3814
3NA3805
l
l
3NA3807
3NA3812
3NA3814
3NA3820
3NA3822
3NA3824
3NA3830
3NA3832
3NA3836
3NA3140
3NA3144
3NE1817-0
3NE1818-0
3NE1820-0
3NE1021-0
3NE1022-0
3NE1224-0
3NE1225-0
3NE1227-0
l Use in America requires
u-listed fuses such as the
Class NON/NOS range
from Bussmann.
Circuit-breaker
(see Catalog LV 1)
3RV1021-1EA10
3RV1021-1HA10
3RV1021-1JA10
3RV1021-1KA10
3RV1021-4AA10
3RV1021-4DA10
3RV1031-4EA10
3RV1031-4FA10
3RV1041-4JA10
3RV1031-4EA10
3RV1031-4FA10
3RV1031-4HA10
3RV1021-1KA10
3RV1021-4AA10
3RV1021-4BA10
3RV1031-4EA10
3RV1031-4FA10
3RV1031-4HA10
3RV1042-4KA10
3RV1042-4MA10
3VL1712- . DD33- . . . .
3VL1716- . DD33- . . . .
3VL3720- . DC36- . . . .
3VL3725- . DC36- . . . .
3VL4731- . DC36- . . . .
© Siemens AG 2007
MICROMASTER 440
Options
Variant independent options
■ Overview
Basic Operator Panel (BOP)
With the BOP, individual parameter settings can be made.
Values and units are shown on
a 5-digit display.
The AOP is directly plugged
into the inverter, or communicates with the latter through a
door mounting kit. Together
with the “AOP door mounting
kit for multiple inverters”, the
AOP permits bus communication with up to 30 inverters at a
transmission rate of 38 kbaud.
(RS485, USS).
For servicing purposes, the
AOP furthermore supports the
download and upread of complete parameter kits.
Asian Advanced
Operator Panel (AAOP)
Basic Operator Panel (BOP)
A BOP can be used for several
inverters. It can be directly
mounted on the inverter or in a
control cabinet door using a
mounting kit.
The AAOP is the Chinese version of the AOP operator panel. It has an enhanced display
and supports the operating
languages of Chinese (simplified) and English.
Advanced Operator Panel
(AOP)
The AOP enables
MICROMASTER 440 parameter kits to be easily read and
modified. In contrast to the
BOP, the value and meaning
of the parameters can be directly displayed as plain text
in several languages by fast
scrolling of the address.
Asian Advanced Operator Panel
(AAOP)
PROFIBUS module
CANopen module
For a complete PROFIBUS
connection with up to
£ 12 Mbaud. Remote control
of the inverter is possible with
the PROFIBUS module. Remote control and operation at
the inverter can be combined
using an operator panel
plugged onto the PROFIBUS
module. The PROFIBUS module can be supplied by an external 24 V DC power supply
and is thus also active when
the inverter is disconnected
from the power supply.
Using the CANopen communications module, an inverter
can be linked to the CANopen
fieldbus system and remote
control is then possible.
Connection by means of a
9-pin Sub-D connector (available as an option).
DeviceNet module
For networking the inverters to
the DeviceNet fieldbus system
widely used on the American
market. A maximum transmission rate of 500 kbaud is possible. Remote control of the inverter is possible with the DeviceNet module. Remote control and operation at the inverter can be combined using an
operator panel plugged onto
the DeviceNet module.
The connection to the
DeviceNet bus system is
made using a 5-pin connector
with terminal strip.
Remote control and operation
at the inverter can be combined using an operator panel
plugged onto the CANopen
module.
The module is connected to
the bus system through a
9-pin Sub-D connector.
Pulse encoder evaluation
module
The pulse encoder evaluation
module permits direct connection of the most widely encountered digital pulse encoders to the inverter.
They offer the following functions:
■ Zero speed at full load
torque
■ Extremely accurate speed
control
■ Increased dynamic response of speed and
torque control.
This module can be used with
HTL and TTL pulse encoders
(High voltage Transistor
Logic, 24 V and Transistor
Logic, 5 V).
Cyrillic Advanced
Operator Panel (CAOP)
The CAOP is the Cyrillic version of the AOP Advanced
Operator Panel. It supports
the Cyrillic, German and
English operator languages.
4
Advanced Operator Panel (AOP)
Siemens DA 51.2 · 2007/2008
4/21
© Siemens AG 2007
MICROMASTER 440
Options
Variant independent options
■ Overview (continued)
Connection kit for
PC to inverter
Connection kit for PC
to AOP
AOP door mounting kit for
multiple inverters (USS)
For controlling an inverter directly from a PC if the appropriate software has been installed (e.g. STARTER). Isolated RS-232 adapter module for
reliable point-to-point connection to a PC. Includes a Sub-D
connector and an RS-232
standard cable (3 m).
For connecting a PC to an
AOP or AAOP. Offline programming of inverters and
archiving of parameter kits
possible. Includes a desktop
attachment kit for an AOP or
AAOP, an RS-232 standard
cable (3 m) with Sub-D connectors and a universal power
supply unit.
For mounting an AOP or AAOP
in a control cabinet door.
Degree of protection IP56.
The AOP or AAOP can communicate with several inverters by means of the RS-485
USS protocol. The 4-pin connecting cable from the AOP or
AAOP to the RS-485 terminals
of the inverter and to the 24 V
user terminal strip is not included 2).
Operator panel door mounting kit for single inverter
For mounting an operator
panel in a control cabinet
door. Degree of protection
IP56. Contains a cable
adapter module with screwless terminals for use with
user's own RS-232 cables 1).
Start-up tools
• STARTER
Starter is graphic start-up
software for guided start-up
for MICROMASTER 410/
420/430/440 frequency inverters under Windows
2000/XP Professional. Parameter lists can be read
out, altered, stored, entered
and printed.
• DriveMonitor
is a start-up software for listoriented programming of
frequency inverters. This
program executes under
Windows 98/NT/2000/ME/
XP Professional.
Both programs are included
on the Docu DVD which is provided with every inverter.
■ Selection and ordering data
The options listed here are
suitable for all
MICROMASTER 440 inverters.
Options
Basic Operator Panel (BOP)
Advanced Operator Panel (AOP)
Asian Advanced Operator Panel (AAOP)
Cyrillic Advanced Operator Panel (CAOP)
PROFIBUS module
DeviceNet module
CANopen module
Pulse encoder evaluation module
RS485/PROFIBUS bus connector
Connection kit for PC to inverter
Connection kit for PC to AOP
Operator panel door mounting kit for single inverter
AOP door mounting kit for multiple inverters (USS)
Start-up tool STARTER on DVD
Order No.
6SE6400-0BP00-0AA0
6SE6400-0AP00-0AA1
6SE6400-0AP00-0AB0
6SE6400-0AP00-0CA0
6SE6400-1PB00-0AA0
6SE6400-1DN00-0AA0
6SE6400-1CB00-0AA0
6SE6400-0EN00-0AA0
6GK1500-0FC00
6SE6400-1PC00-0AA0
6SE6400-0PA00-0AA0
6SE6400-0PM00-0AA0
6SE6400-0MD00-0AA0
6SL3072-0AA00-0AG0
4
1) A shielded cable of type
Belden 8132 (28 AWG) is recommended. The maximum
cable length is 5 m for RS-232.
4/22
2) A shielded cable of type
Belden 8132 (28 AWG) is recommended. The maximum
cable length is 10 m for
RS-485.
Siemens DA 51.2 · 2007/2008
Available on the Internet at:
http://support.automation.siemens.com/
WW/view/en/10804985/133100
© Siemens AG 2007
MICROMASTER 440
Options
Variant independent options
■ Technical data
PROFIBUS module
6SE6400-1PB00-0AA0
Size (height x width x depth)
Degree of protection
Degree of pollution
Strain resistance
• Stationary
• Transport
Deflection
Acceleration
Deflection
Acceleration
Climatic category (during operation)
Cooling method
Permissible ambient or cooling agent temperature
• Operation
• Storage and transport
Relative humidity (permissible
humidity rating)
• Operation
• Storage and transport
Electromagnetic compatibility
Emission
Interference
Power supply
Output voltage
Data transmission rate
DeviceNet module
6SE6400-1DN00-0AA0
161 mm x 73 mm x 46 mm
IP20
2 to IEC 60 664-1 (DIN VDE 0110/T1), no condensation permitted during operation
to IEC 60 068-2-6 (if module is installed correctly)
0.15 mm in the frequency range of 10 Hz to 58 Hz
19.6 m/s2 in the frequency range of 58 Hz to 500 Hz
3.5 mm in the frequency range of 5 Hz to 9 Hz
9.8 m/s2 in the frequency range of 9 Hz to 500 Hz
3K3 to IEC 60 721-3-3
Natural air cooling
–10 °C to +50 °C (+14 °F to +122 °F)
–25 °C to +70 °C (–13 °F to +158 °F)
£ 85 % (non-condensing)
£ 95 %
to EN 55 011 (1991) Class A
to IEC 60 801-3 and EN 61 000-4-3
6.5 V ± 5 %, max. 300 mA,
internal from inverter or
24 V ± 10 %, max. 350 mA, external
5 V ± 10 %, max. 100 mA,
galvanically isolated supply
• for terminating the serial interface bus or
• for supplying the OLP (Optical Link Plug)
max. 12 Mbaud
6.5 V ± 5 %, max. 300 mA
internal from inverter or
24 V, max. 60 mA from DeviceNet-Bus
–
125, 250 and 500 Kbaud
4
Siemens DA 51.2 · 2007/2008
4/23
© Siemens AG 2007
MICROMASTER 440
Options
Variant independent options
■ Technical data (continued)
CANopen module
6SE6400-1CB00-0AA0
Size (height x width x depth)
Degree of protection
Degree of pollution
Strain resistance
• Stationary
• Transport
Deflection
Acceleration
Deflection
Acceleration
Climatic category (during operation)
Cooling method
Permissible ambient or cooling agent temperature
• Operation
• Storage
• Transportation
Electromagnetic compatibility
Emission
Interference
Relative humidity (permissible humidity rating)
• Operation
• Storage and transport
Power supply
Data transmission rate
Pulse frequency
4
4/24
Siemens DA 51.2 · 2007/2008
Pulse encoder evaluation module
6SE6400-0EN00-0AA0
161 mm x 73 mm x 46 mm
161 mm x 73 mm x 42 mm
IP20
2 to IEC 60 664-1 (DIN VDE 0110/T1), no condensation permitted during operation
to IEC 60 068-2-6 (if module is installed correctly)
0.15 mm in the frequency range of 10 Hz to 58 Hz
19.6 m/s2 in the frequency range of 58 Hz to 500 Hz
3.5 mm in the frequency range of 5 Hz to 9 Hz
9.8 m/s2 in the frequency range of 9 Hz to 500 Hz
3K3 to IEC 60 721-3-3
Natural air cooling
–10 °C to +50 °C (+14 °F to +122 °F)
–40 °C to +70 °C (–40 °F to +158 °F)
–25 °C to +70 °C (–13 °F to +158 °F)
to EN 55 011 (1991) Class A
to IEC 60 801-3 and EN 61 000-4-3
£ 85 % (non-condensing)
£ 95 %
The CAN bus is supplied from the inverter
power supply
10, 20, 50, 125, 250, 500, 800 kbaud
and 1 Mbaud
–
–10 °C to +50 °C (+14 °F to +122 °F)
–20 °C to +70 °C (–14 °F to +158 °F)
–20 °C to +70 °C (–14 °F to +158 °F)
5 V ± 5 %, 330 mA or 18 V non-regulated,
140 mA, short-circuit proof
–
max. 300 kHz
© Siemens AG 2007
MICROMASTER 440
Documentation
■ Selection and ordering data
Type of documentation
Docu pack,
supplied with each inverter,
containing DVD 1) and Getting Started Guide 2)
(paper version)
Operating instructions
(paper version)
Parameter list
(paper version)
Language
Multilanguage
Order No.
6SE6400-5AD00-1AP1
German, English, French, Italian, Spanish
Available as pdf file on the Internet at
http://support.automation.siemens.com/WW/view/en/10804926/133300
German, English, French, Italian, Spanish
Available as pdf file on the Internet at
http://support.automation.siemens.com/WW/view/en/10804926/133300
4
1) The DVD contains operating
instructions, parameter list,
commissioning tools STARTER
and DriveMonitor, multilanguage.
Available on the Internet:
DriveMonitor at
http://support.automation.
siemens.com/WW/view/en/
10804984/133100
STARTER at
http://support.automation.
siemens.com/WW/view/en/
10804985/133100
2) Available on the Internet at
http://support.automation.
siemens.com/WW/view/en/
10804926/133300
Siemens DA 51.2 · 2007/2008
4/25
© Siemens AG 2007
MICROMASTER 440
Dimension drawings
■ MICROMASTER 440 inverter
Frame size
1/3 AC 200 V to 240 V
3 AC 380 V to 480 V
3 AC 500 V to 600 V
A
0.12 kW to 0.75 kW
0.37 kW to 1.5 kW
–
B
1.1 kW to 2.2 kW
2.2 kW to 4 kW
–
C
3 kW to 5.5 kW
5.5 kW to 11 kW
0.75 kW to 11 kW
Note:
The inverters must not be mounted
horizontally. But the inverters can be
mounted without lateral spacing.
The specified outputs are valid for CT mode.
73
(2.87)
Fixing with 2 x M4 bolts, 2 x M4 nuts,
2 x M4 washers
or by snapping onto a rail
Tightening torque with washers fitted:
2.5 Nm
Ventilation clearance required
Top and bottom: 100 mm
Inverter frame size A
ADA51-5007c
195 (7.68)
58
(2.28)
160 (6.29)
ADA51-5000e
DIN Rail
(5 149
.8
7)
147 (5.79)
173 (6.81)
Drill and fixing pattern
Inverter frame size A with gland plate
ADA51-5008b
258 (10.16)
202 (7.95)
G_DA51_EN_05001d
174 (6.85)
Drill pattern
149 (5.87)
(6 172
.7
7)
138 (5.43)
Fixing with 4 x M4 bolts, 4 x M4 nuts,
4 x M4 washers
Tightening torque with washers fitted:
2.5 Nm
Ventilation clearance required
Top and bottom: 100 mm
Inverter frame size B
Inverter frame size B with gland plate
309 (12.16)
ADA51-5002d
245 (9.65)
4
ADA51-5009b
204 (8.03)
Drill pattern
(7 195
.6
8)
174 (6.85)
185 (7.28)
Inverter frame size C
Fixing with 4 x M5 bolts, 4 x M5 nuts,
4 x M5 washers
Tightening torque with washers fitted:
3.0 Nm
Ventilation clearance required
Top and bottom: 100 mm
With the communications module, the mounting depth increases by 23 mm
(0.91 inches). If a pulse encoder evaluation module is mounted in addition,
the installation depth increases by another 23 mm (0.91 inches).
4/26
Siemens DA 51.2 · 2007/2008
Inverter frame size C with gland plate
All dimensions in mm (values in brackets are in inches)
© Siemens AG 2007
MICROMASTER 440
Dimension drawings
■ MICROMASTER 440 inverter (continued)
Frame size
3 AC 200 V to 240 V
3 AC 380 V to 480 V
3 AC 500 V to 600 V
D
7.5 kW to 15 kW
15 kW to 22 kW
15 kW to 22 kW
E
18.5 kW to 22 kW
30 kW to 37 kW
30 kW to 37 kW
F
30 kW to 45 kW
45 kW to 75 kW
45 kW to 75 kW
Note:
The inverters must not be mounted
horizontally. But the inverters can be
mounted without lateral spacing.
The specified outputs are valid for CT mode.
Drill pattern
Inverter frame size D
616.4 (24.27)
650 (25.59)
Fixing with
4 x M8 bolts, 4 x M8 nuts,
4 x M8 washers
Tightening torque with washers
fitted: 13 Nm
Ventilation clearance required
Top and bottom: 300 mm
275 (10.82)
235 (9.25)
(9 245
.6
5)
235 (9.25)
(9 245
.6
5)
275 (10.82)
ADA51-5021b
ADA51-5020b
486 (19.13)
520 (20.47)
Drill pattern
Fixing with
4 x M8 bolts, 4 x M8 nuts,
4 x M8 washers
Tightening torque with washers
fitted: 13 Nm
Ventilation clearance required
Top and bottom: 300 mm
Inverter frame size E
Drill pattern
1110 (43.70)
1150 (45.28)
810 (31.89)
Fixing with
4 x M8 bolts, 4 x M8 nuts,
4 x M8 washers
Tightening torque with washers
fitted: 13 Nm
Ventilation clearance required
Top and bottom: 350 mm
300 (11.81)
350 (13.78)
Inverter frame size F
with filter
(1 320
2.
6)
350 (13.78)
Inverter frame size F
without filter
(1 320
2.
6)
300 (11.81)
4
ADA51-5023b
ADA51-5022b
850 (33.46)
Drill pattern
Fixing with
4 x M8 bolts, 4 x M8 nuts,
4 x M8 washers
Tightening torque with washers
fitted: 13 Nm
Ventilation clearance required
Top and bottom: 350 mm
All dimensions in mm (values in brackets are in inches)
Siemens DA 51.2 · 2007/2008
4/27
© Siemens AG 2007
MICROMASTER 440
Dimension drawings
■ MICROMASTER 440 inverter (continued)
Frame size
Note:
The inverters must not be mounted
horizontally. But the inverters can be
mounted without lateral spacing.
3 AC 380 V to 480 V
FX
90 kW to 110 kW
GX
132 kW to 200 kW
The specified outputs are valid for CT mode.
Drill pattern
Drill pattern
125 125
(4.92) (4.92)
Inverter frame size FX
1533 (60.35)
326
(12.83)
(2 54
1. 5
46
)
Fixing with
6 x M8 bolts
6 x M8 nuts
6 x M8 washers
Tightening torque
with washers
fitted: 13.0 Nm
Ventilation clearance
required:
at top: 250 mm
at bottom: 150 mm
in front: 40 mm
G_DA51_EN_05075
1375 (54.13)
1400 (55.12)
(1 35
4. 6
06
)
G_DA51_EN_05074
326
(12.83)
125 125
(4.92) (4.92)
1508 (59.37)
125 125
(4.92) (4.92)
Inverter frame size GX
125 125
(4.92) (4.92)
Fixing with
6 x M8 bolts
6 x M8 nuts
6 x M8 washers
Tightening torque
with washers
fitted: 13.0 Nm
Ventilation clearance
required:
at top: 250 mm
at bottom: 150 mm
in front: 50 mm
4
All dimensions in mm (values in brackets are in inches)
4/28
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
MICROMASTER 440
Dimension drawings
■ EMC filter
73
56
149 (5.87)
120 (4.72)
24
(0.94)
(2.87)
(2.2)
185 (7.28)
156 (6.14)
38
(1.5)
43.5 (1.71)
G_DA51_EN_00063
245 (9.65)
204 (8.03)
50.5 (1.99)
138
(5.43)
EMC filter for frame size A
187 (7.36)
200 (7.87)
G_DA51_EN_00062
213 (8.39)
174 (6.85)
G_DA51_EN_00061
200 (7.87)
160 (6.3)
174 (6.85)
187 (7.36)
4 x M4
2 x M4
55 (2.17)
174
(6.85)
For frame size B
219 (8.62)
232 (9.13)
4 x M4
For frame size C
b1
n4
a1
G_DA51_XX_05103
a
b
n3
c
EMC filter
Class A
Type
6SL30000BE32-5AA0
for inverter Dimensions
Frame size
(FS)
a
a1
0BE34-4AA0
GX/GX
0BE36-0AA0
GX
FX
270
(10.63)
270
(10.63)
310
(12.2)
360
(14.17)
360
(14.17)
400
(15.75)
b
b1
c
n3
n4
200
(7.87)
200
(7.87)
215
(8.46)
240
(9.45)
240
(9.45)
265
(10.43)
116
(4.57)
116
(4.57)
140
(5.51)
210
(8.27)
210
(8.27)
250
(9.84)
220
(8.66)
220
(8.66)
240
(9.45)
Weight,
approx
kg
12.3
4
12.3
19.0
EMC filter for frame sizes FX and GX
All dimensions in mm (values in brackets are in inches)
Siemens DA 51.2 · 2007/2008
4/29
© Siemens AG 2007
MICROMASTER 440
Dimension drawings
■ LC filter
100
(3.9)
Fixing with M4 bolts
Fixing with M4 bolts
LC filter for frame size A
140
(5.51)
120
(4.72)
G_DA51_EN_05080
G_DA51_EN_05079
G_DA51_EN_05076
334 (13.15)
300 (11.81)
56
(2.2)
Drill pattern
138
(5.43)
340 (13.38)
293 (11.53)
56
(2.2)
150 (5.9)
280 (11.02)
Drill pattern
G_DA51_EN_05077
75.5
(2.97)
287 (11.3)
110
(4.3)
For frame size B
185 (7.28)
Drill pattern
4
156 (6.14)
G_DA51_EN_05081
G_DA51_EN_05078a
382 (15.04)
335 (13.19)
320 (12.6)
174 (6.85)
Fixing with M5 bolts
LC filter for frame size C
All dimensions in mm (values in brackets are in inches)
4/30
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
MICROMASTER 440
Dimension drawings
■ LC filter
b
LC filter
Type
for inverter
Frame size
(FS)
6SE6400-3TD03-7DD0
D
6SE6400-3TD04-8DD0
D
6SE6400-3TD06-1DD0
D
6SE6400-3TD02-3DE0
D
6SE6400-3TD03-2DE0
D
6SE6400-3TD03-7DE0
D
6SE6400-3TD07-2ED0
E
6SE6400-3TD04-8EE0
E
6SE6400-3TD06-1EE0
E
6SE6400-3TD11-5FD0
E/F
6SE6400-3TD15-0FD0
F
6SE6400-3TD18-0FD0
F
6SE6400-3TD07-1FE0
F
6SE6400-3TD10-0FE0
F
6SE6400-3TD11-5FE0
F
a
G_DA51_XX_05082
c
n2
Fixing with M10 bolts
LC filter for frame sizes D to F
n1
Dimensions
a
278
(10.94)
290
(11.42)
345
(13.58)
280
(11.02)
300
(11.81)
310
(12.2)
355
(13.98)
345
(13.58)
345
(13.58)
460
(18.11)
460
(18.11)
520
(20.47)
380
(14.96)
460
(18.11)
515
(20.28)
Weight,
approx
b
240
(9.45)
240
(9.45)
300
(11.81)
240
(9.45)
300
(11.81)
300
(11.81)
300
(11.81)
300
(11.81)
300
(11.81)
360
(14.17)
360
(14.17)
420
(16.54)
300
(11.81)
360
(14.17)
420
(16.54)
c
230
(9.06)
240
(9.45)
220
(8.66)
240
(9.45)
235
(9.25)
250
(9.84)
235
(9.25)
260
(10.24)
275
(10.83)
235
(9.25)
250
(9.84)
290
(11.42)
285
(11.22)
250
(9.84)
290
(11.42)
n1
115
(4.53)
125
(4.92)
120
(4.72)
125
(4.92)
133
(5.24)
145
(5.71)
145
(5.71)
160
(6.3)
171
(6.73)
125
(4.92)
140
(5.51)
173
(6.81)
171
(6.73)
140
(5.11)
173
(6.81)
n2
kg
190
21.0
(7.48)
190
26.0
(7.48)
240
34.0
(9.45)
190
26.1
(7.48)
240
39.5
(9.45)
240
42.0
(9.45)
240
49.5
(9.45)
240
48.5
(9.45)
240
57.5
(9.45)
264
67.0
(10.39)
264
75.0
(10.39)
316
77.5
(12.44)
240
70.5
(9.45)
264
70.5
(10.39)
316
125.5
(12.44)
4
All dimensions in mm (values in brackets are in inches)
Siemens DA 51.2 · 2007/2008
4/31
© Siemens AG 2007
MICROMASTER 440
Dimension drawings
■ Sinusoidal filter
a
G_DA51_XX_00013
b
n1
n2
n3
c
n4
Sinusoidal filter for frame sizes FX and GX
Sinusoidal filter
Type 6SL3000-
for inverter
Frame size (FS)
2CE32-3AA0
FX
2CE32-8AA0
GX
Dimensions
a
300
(11.81)
300
(11.81)
b
620
(24.41)
620
(24.41)
c
320
(12.6)
320
(12.6)
n1
280
(11.02)
280
(11.02)
n2
105
(4.13)
105
(4.13)
n3
225
(8.86)
225
(8.86)
n4
150
(5.91)
150
(5.91)
Weight
(max.)
kg
135.0
138.0
a
G_DA51_XX_00014
b
n1
n2
n3
c
n4
Sinusoidal filter for frame size GX
Sinusoidal filter
Type 6SL3000-
for inverter
Frame size (FS)
2CE33-3AA0
GX
2CE34-1AA0
GX
4
Dimensions
a
370
(14.57)
370
(14.57)
b
620
(24.41)
620
(24.41)
c
360
(14.17)
360
(14.17)
n1
320
(12.6)
320
(12.6)
n2
105
(4.13)
105
(4.13)
n3
225
(8.86)
225
(8.86)
n4
150
(5.91)
150
(5.91)
Weight
(max.)
kg
144.0
208.0
All dimensions in mm (values in brackets are in inches)
4/32
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
MICROMASTER 440
Dimension drawings
■ Line commutating chokes
b
c
b
c
Line commutating choke
for
Frame size A
d
e
G_DA51_XX_00064
a
a
DA51-5013e
Frame size B
Frame size C
(380–480 V)
Frame size C
(500–600 V,
0.75–1.5 kW)
Frame size C
(500–600 V,
2.2–4 kW)
Frame size C
(500–600 V,
5.5–11 kW)
For frame sizes B and C
Line commutating choke
for frame size A
Dimensions
a
200
(7.87)
213
(8.39)
245
(9.65)
245
(9.65)
b
75.5
(2.97)
150
(5.91)
185
(7.28)
185
(7.28)
c
50
(1.97)
50
(1.97)
50
(1.97)
50
(1.97)
Weight
(max.)
kg
1.4
d
–
e
–
220
(8.66)
264
(10.39)
264
(10.39)
233
2.2
(9.17)
280
5.1
(11.02)
280
3.8
(11.02)
245
185
50
264
280
4.0
(9.65) (7.28) (1.97) (10.39) (11.02)
245
185
80
264
280
8.0
(9.65) (7.28) (3.15) (10.39) (11.02)
b
c
Line commutating
choke for
a
520
(20.47)
650
(25.59)
a
DA51-5051
Dimensions
Frame size D
Frame size E
b
275
(10.83)
275
(10.83)
Weight
(max.)
kg
9.5
c
85
(3.35)
95
(3.74)
17.0
Line commutating choke for frame sizes D and E
b
a
G_DA51_XX_05052
c
Line commutating choke
Type
6SE64003CC11-....
for inverter Dimensions
Frame size
(FS)
a
b
F
228
(8.98)
240
(9.45)
c
n1
n2
141
(5.55)
95
(3.74)
185
(7.28)
Weight
(max.)
kg
25.0
n1
n2
4
Line commutating choke for inverter frame size F
b
a
G_DA51_XX_05053
c
Line commutating choke
Type
6SL30000CE32-....
for inverter Dimensions
Frame size
(FS)
a
b
0CE33-....
GX
0CE35-....
GX
FX
248
(9.76)
248
(9.76)
269
(10.59)
255
(10.04)
255
(10.04)
275
(10.83)
c
n1
n2
203
(7.99)
203
(7.99)
210
(8.27)
101
(3.98)
101
(3.98)
118
(4.65)
200
(7.87)
200
(7.87)
224
(8.82)
Weight
(max.)
kg
24.0
25.0
35.0
n1
n2
Line commutating choke for inverters of frame sizes FX and GX
All dimensions in mm (values in brackets are in inches)
Siemens DA 51.2 · 2007/2008
4/33
© Siemens AG 2007
MICROMASTER 440
Dimension drawings
■ Output chokes
c
b
c
b
G_DA51_XX_05050a
a
DA51-5049
a
Output choke
Type 6SE6400-
a
200
(7.87)
200
(7.87)
213
(8.39)
245
(9.65)
245
(9.65)
3TC00-4AD2
3TC00-4AD3
3TC01-0BD3
3TC01-8CE3
3TC03-2CD3
Output choke
for frame size A
6SE6400-3TC00-4AD2
6SE6400-3TC00-4AD3
b
75.5
(2.97)
75.5
(2.97)
150
(5.91)
185
(7.28)
185
(7.28)
c
110
(4.33)
50
(1.97)
80
(3.15)
110
(4.33)
80
(3.15)
Weight
(max.)
kg
1.9
1.3
4.1
10.8
6.6
For frame sizes B and C
6SE6400-3TC01-0BD3
6SE6400-3TC01-8CE3
6SE6400-3TC03-2CD3
b
Output choke
for inverter Dimensions
Type 6SE6400- Frame size
(FS)
a
b
3TC03-2DE0
D
210
225
(8.27)
(8.86)
3TC03-8DD0
D
210
225
(8.27)
(8.86)
3TC05-4DD0
D
210
225
(8.27)
(8.86)
3TC06-2FE0
F
269
300
(10.59) (11.81)
3TC07-5ED0
E
248
270
(9.76)
(10.63)
3TC08-0ED0
E
210
225
(8.27)
(8.86)
3TC08-8FE0
F
321
350
(12.64) (13.78)
3TC14-5FD0
F
321
350
(12.64) (13.78)
3TC15-4FD0
F
248
270
(9.76)
(10.63)
a
G_DA51_XX_05052
c
Dimensions
n1
n2
Output chokes
for inverters of frame sizes D, E and F
c
179
(7.05)
179
(7.05)
150
(5.91)
220
(8.66)
209
(8.23)
150
(5.91)
288
(11.34)
288
(11.34)
209
(8.23)
to DIN 41 308
n1
n2
94
176
(3.70)
(6.93)
94
176
(3.70)
(6.93)
70
176
(2.76)
(6.93)
118
224
(4.65)
(8.82)
101
200
(3.98)
(7.87)
70
176
(2.76)
(6.93)
138
264
(5.43)
(10.39)
138
264
(5.43)
(10.39)
101
200
(3.98)
(7.87)
Weight
(max.)
kg
16.0
16.1
10.7
33.9
24.9
10.4
51.5
51.5
24.0
b
4
a
G_DA51_XX_05053
c
n1
Output choke
for inverter Dimensions
Type 6SL3000- Frame size
(FS)
a
b
2BE32-1AA0
FX
285
300
(11.22) (11.81)
2BE32-6AA0
FX
315
300
(12.4)
(11.81)
2BE33-2AA0
GX
285
300
(11.22) (11.81)
2BE33-8AA0
GX
285
300
(11.22) (11.81)
2BE35-0AA0
GX
365
300
(14.37) (11.81)
c
257
(10.12)
277
(10.91)
257
(10.12)
277
(10.91)
277
(10.91)
n1
163
(6.42)
183
(7.2)
163
(6.42)
183
(7.2)
183
(7.2)
n2
224
(8.82)
224
(8.82)
224
(8.82)
224
(8.82)
224
(8.82)
Weight
(max.)
kg
60.0
66.0
62.0
73.0
100.0
n2
Output chokes
for inverters of frame sizes FX and GX
All dimensions in mm (values in brackets are in inches)
4/34
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
MICROMASTER 440
Dimension drawings
■ Brake resistors
Fig. 1:
Fig. 2:
Frame sizes A, B
Frame sizes C, D, E, F
Fastening hole: circular hole Ø 5.2 mm
Fastening hole: slotted hole 6 x 12 mm
or circular hole Ø 6.5 mm
b
n4
c
b
n4
c
DA51-5069
DA51-5055a
n3
a
n3
a
a
DA51-5056
n3
c
n4
b
Fig. 3:
c1
n1
c0
n2
Brake
resistors
Type
6SE64004BC05-0AA0
Resistor
Figure
No.
Dimensions
Ohm
for inverter
Frame size
(FS)
a
b
c
c0
c1
For floor mounting For wall mounting
n1
n2
n3
n4
180
A
1
–
–
B
2
–
–
–
–
4BC12-5CA0
39
C
3
4BC13-0CA0
27
C
3
4BC18-0DA0
10
D
3
4BC21-2EA0
6.8
E
3
4BC22-5FA0
3.3
F
3
4BD11-0AA0
390
A
1
185
(7.28)
185
(7.28)
210
(8.27)
210
(8.27)
350
(13.78)
–
217
(8.54)
217
(8.54)
242
(9.53)
242
(9.53)
382
(15.04)
–
170
(6.69)
170
(6.69)
195
(7.68)
195
(7.68)
335
(13.19)
–
145
(5.71)
145
(5.71)
205
(8.07)
205
(8.07)
270
(10.63)
–
4BD12-0BA0
160
B
2
–
–
–
–
4BD16-5CA0
56
C
3
4BD21-2DA0
27
D
3
4BD22-2EA0
15
E
3
4BD24-0FA0
8.2
F
3
4BE14-5CA0
120
C
3
4BE16-5CA0
82
C
3
4BE21-3DA0
39
D
3
4BE21-8EA0
27
E
3
4BE24-2FA0
12
F
3
43.5
(1.71)
43.5
(1.71)
150
(5.91)
150
(5.91)
175
(6.89)
175
(6.89)
315
(12.40)
43.5
(1.71)
43.5
(1.71)
150
(5.91)
175
(6.89)
175
(6.89)
315
(12.40)
150
(5.91)
150
(5.91)
175
(6.89)
175
(6.89)
315
(12.40)
–
68
72
(2.83)
149
(5.87)
185
(7.28)
185
(7.28)
270
(10.63)
270
(10.63)
395
(15.55)
72
(2.83)
149
(5.87)
185
(7.28)
270
(10.63)
270
(10.63)
395
(15.55)
185
(7.28)
185
(7.28)
270
(10.63)
270
(10.63)
395
(15.55)
–
4BC11-2BA0
230
(9.06)
239
(9.41)
285
(11.22)
285
(11.22)
515
(20.28)
645
(25.39)
650
(25.59)
230
(9.06)
239
(9.41)
285
(11.22)
515
(20.28)
645
(25.39)
650
(25.59)
285
(11.22)
285
(11.22)
515
(20.28)
645
(25.39)
650
(25.59)
185
(7.28)
210
(8.27)
210
(8.27)
350
(13.78)
185
(7.28)
185
(7.28)
210
(8.27)
210
(8.27)
350
(13.78)
217
(8.54)
242
(9.53)
242
(9.53)
382
(15.04)
217
(8.54)
217
(8.54)
242
(9.53)
242
(9.53)
382
(15.04)
170
(6.69)
195
(7.68)
195
(7.68)
335
(13.19)
170
(6.69)
170
(6.69)
195
(7.68)
195
(7.68)
335
(13.19)
145
(5.71)
205
(8.07)
205
(8.07)
270
(10.63)
145
(5.71)
145
(5.71)
205
(8.07)
205
(8.07)
270
(10.63)
Brake resistors for inverters of frame sizes A to F
217
(8.54)
226
(8.90)
200
(7.87)
200
(7.87)
350
(13.78)
480
(18.90)
510
(20.08)
217
(8.54)
226
(8.90)
200
(7.87)
350
(13.78)
480
(18.90)
510
(20.08)
200
(7.87)
200
(7.87)
350
(13.78)
480
(18.90)
510
(20.08)
56
(2.20)
133
(5.24)
230
(9.06)
230
(9.06)
315
(12.40)
315
(12.40)
435
(17.13)
56
(2.20)
133
(5.24)
230
(9.06)
315
(12.40)
315
(12.40)
435
(17.13)
230
(9.06)
230
(9.06)
315
(12.40)
315
(12.40)
435
(17.13)
Weight
(max.)
kg
1.0
1.6
3.8
3.8
7.4
10.6
16.7
1.0
1.6
3.8
7.4
10.6
16.7
3.8
3.8
7.4
10.6
16.7
All dimensions in mm (values in brackets are in inches)
Siemens DA 51.2 · 2007/2008
4/35
4
© Siemens AG 2007
MICROMASTER 440
Notes
4
4/36
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
MICROMASTER
420/430/440
Appendix
A/2
Environment, resources and recycling
A/2
Certificates
A/4
Compliance with standards
A/6
Drive ES engineering system
A/7
Demonstration case
A/7
Standard conversion factors:
metric to US units
A/8
Training
A/9
Overview of SIMATIC ET 200S FC/
ET 200pro FC
A/11
Overview of SINAMICS G110, G120, G120D
A/14
Overview of IEC squirrel-cage motors
A/17
Overview of MICROMASTER 411 and
COMBIMASTER 411
A/18
Overview of NEMA motors
A/19
Siemens contacts worldwide
A/20
Online services
A/21
Service & Support
A/22
Subject index
A/23
Order No. index
Notes on ordering
A/24
Conditions of sale and delivery
Export regulations
A
Siemens DA 51.2 · 2007/2008
A/1
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Environment, resources and recycling
Siemens AG feels a responsibility to play a role in protecting our environment and saving our valuable natural resources. This is true for both
our production and our
products.
Even during development, we
consider any possible environmental impact of future
products/systems. Our aim is
to prevent harmful environmental effects or at least to reduce them to an absolute minimum – beyond present regulations and legislation.
The most important activities
for protecting our environment
are as follows:
■ We are constantly endeavoring to reduce the environmental impact of our products as well as their
consumption of energy and
resources over and above
the statutory environmental
protection regulations.
■ We take every possible
step to prevent damage to
the environment.
■ Environmental impact is assessed and considered at
the earliest possible stage
of product and process
planning.
■ Certificates
A
A/2
Siemens DA 51.2 · 2007/2008
■ Our optimized environmen-
■ We urge our business part-
tal management strategy
ensures that our environmental policy is put into
practice effectively. The
necessary technical and
organizational procedures
are reviewed at regular intervals and continuously
updated.
■ An awareness for environmental problems is expected of all our employees.
Establishing and furthering
a sense of responsibility for
the environment on all levels represents a permanent
challenge for the corporate
management.
ners to act according to the
same environmental principles as ourselves. We cooperate with the responsible public authorities.
■ We inform interested members of the public about the
consequences of our corporate policies for the environment as well as our
achievements to the benefit
of the environment.
■ Our complete documentation is printed on chlorinefree bleached paper.
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Certificates (continued)
Legend for EC declaration of conformity:
The named product is in conformity with the requirements of the
following European Directive:
73/23/EEC Council Directive on the approximation of the laws of the
Member States relating to electrical equipment for use
within certain voltage limits, amended by Council Directive
RL 93/68/EEC
Conformity with the requirements of this Directive is testified by
adherence to the following standards:
EN 61800-5-1: 2003 1)
The named product is intended for fitting in another machine.
Commissioning is prohibited until such time as the end product has
been proved to conform to the provisions of Directive 98/37/EC.
This declaration certifies compliance with the Directives named above,
but does not guarantee any specific properties or durability according
to §443 BGB. The safety information and instructions in the supplied
product documentation must be carefully observed.
A
1) Deviations to the requirements listed in EN 61800-5-1 must be
documented in a technical report on the risk assessment.
Siemens DA 51.2 · 2007/2008
A/3
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Compliance with standards
CE marking
The MICROMASTER inverters
meet the requirements of the
Low-Voltage Directive
73/23/EEC.
Low-voltage directive
The inverters comply with the
following standards listed in
the Official Journal of the
European Communities:
• EN 60 204
Safety of machinery, electrical
equipment of machines
• EN 61 800-5-1
Electrical power drive systems
with variable speed – Part 5-1:
Requirements regarding
safety - electrical, thermal and
energy requirements
Machine directive
The inverters are suitable for
installation in machines. Compliance with the machine directive 89/392/EEC requires a
separate certificate of conformity. This must be furnished
by the plant constructor or the
installer of the machine.
EMC directive
• EN 61 800-3
Variable-speed electric drives
Part 3: EMC product standard
including special test procedure.
The new EMC product standard EN 61 800-3 applies to
electrical drive systems as of
July 1, 2005. The transition
period for the preceding standard EN 61 800-3/A11 dated
February 2001 ends on October 1, 2007. The following explanations apply to frequency
inverters of the 6SE6 series
from Siemens:
A
• As a rule, frequency inverters are only supplied to
qualified technical specialists for installation in machines or plants. A frequency inverter must therefore
only be considered as a
component which, as such,
is not subject to the EMC
product standard
EN 61 800-3. However, the
inverter's instruction manual
specifies the conditions
under which the product
standard can be complied
with if the frequency inverter
is expanded to become a
PDS. For a PDS, the EMC directive in the EU is complied
with through observance of
the product standard
EN 61 800-3 for variablespeed electrical drive systems. The frequency inverters on their own do not
generally require marking
according to the EMC directive.
• The new EN 61 800-3 of July
2005 no longer distinguishes between “general availability” and “restricted availability”. Instead, different
categories, namely C1 to
C4, are defined according to
the environment of the PDS
at the place of use:
– Category C1:
Drive systems for rated
voltages of < 1000 V for
use in the first environment
– Category C2:
Fixed-location drive systems which are not connected by means of plugin devices, for rated voltages of < 1000 V. If used
in the first environment,
installation and start-up
may only be carried out
by qualified EMC personnel. Warning information
must be provided.
• The EMC product standard
EN 61 800-3 does not apply
directly to a frequency inverter but to a PDS (Power
Drive System), which comprises the complete circuitry, motor and cables in addition to the inverter.
A/4
Siemens DA 51.2 · 2007/2008
– Category C3:
Drive systems for rated
voltages of < 1000 V,
solely for use in the second environment. Warning information must be
provided.
– Category C4:
Drive systems for rated
voltages of ³ 1000 V or
for rated currents of
³ 400 A or for use in
complex systems in the
second environment. An
EMC plan must be drawn
up.
• In the EMC product standard EN 61 800-3, limits for
conducted interference voltages and radiated interference are also indicated for
the so-called “second environment” (= industrial power
supply systems which do
not supply households).
These limits are lower than
the limits of filter class A according to EN 55 011. The
use of unfiltered inverters in
an industrial environment is
permissible provided they
are part of a system that is
equipped with line filters on
the higher-level infeed side.
• With MICROMASTER,
power drive systems (PDS)
which comply with EMC
product standard
EN 61 800-3 can be installed (see the installation
instructions in the product
documentation). The table
entitled “Overview of
MICROMASTER components and PDS categories”
and the MICROMASTER
ordering documents show
which components the respective PDS installation
supports directly.
• In general, a distinction must
be made between the product standards for electrical
drive systems (PDS) of the
EN 61 800 series of standards (of which Part 3 covers EMC topics) and the
product standards for devices/systems/machines etc.
This will probably not result
in any changes in the practical use of frequency inverters. Since frequency inverters are always part of a PDS
and the latter is part of a machine, the manufacturer of
the machine must observe
various standards depending on the type of machine
and the environment, e.g.
EN 61 000-3-2 for power
supply harmonics and
EN 55 011 for radio interference. The PDS product
standard alone is therefore
inadequate or irrelevant.
• With regard to compliance
with limits for power supply
harmonics, the EMC product standard EN 61 800-3
for PDS refers to compliance
with the EN 61 000-3-2 and
EN 61 000-3-12 standards.
• Irrespective of configuration
with MICROMASTER and its
components, the machine
builder can also modify the
machines in other ways in
order to comply with the
EMC directive of the EU. As
a rule, the EMC directive of
the EU is observed through
compliance with the EMC
product standards applicable to the machine. If they
are not available, the generic standards such as DIN
EN 61 000-x-x can be used
instead. What is important is
that the conducted interference and the radiated interference voltages at the power-supply connection point
and outside the machine remain below the corresponding limits. What technical
means are used to ensure
this is not prescribed.
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
Overview of MICROMASTER components and PDS categories
First environment
(residential,
commercial)
Electromagnetic
compatibility
EMC phenomenon
Standard/test
Emitted interference
EN 61 800-3
ESD immunity
EN 61 000-4-2
Immunity to electrical
fields
EN 61 000-4-3
Immunity to burst
interference
EN 61 000-4-4
Surge immunity
EN 61 000-4-5
Immunity to RFI
emissions, conducted
EN 61 000-4-6
UL listing
Category C1
Unfiltered devices plus external Class B filter with low leakage currents
Category C2
Devices with an integrated Class B filter
Devices with an integrated Class B filter
or devices with an integrated Class A filter
or devices with an integrated Class A filter
plus external supplementary filter Class B
plus external supplementary filter Class B
or devices with an integrated Class A filter
or devices with an integrated Class A filter
plus warning information
or unfiltered devices plus external Class A
filter
or unfiltered devices plus external Class A
filter plus warning information
Note: The requirements of EN 61 800-3 are
considerably exceeded if Class B filters are
used.
Category C3
Devices with integrated Class A filter
or unfiltered devices plus external Class A filter
Warning information is necessary.
Note: The requirements of EN 61 800-3 are considerably exceeded if Class A filters are used.
Category C4
Unfiltered devices plus external Class A filter
An EMC plan must be drawn up.
Note: The requirements of EN 61 800-3 are considerably exceeded if Class A filters are used.
No inadmissible electromagnetic emissions occur if the installation instructions specific
to the product are correctly
observed.
The table below lists the
results of measurements
relating to the emissions and
immunity to interference of
MICROMASTER inverters.
Second environment
(industrial)
The inverters were installed
with shielded motor cables
and shielded control cables in
accordance with the directives.
Relevant criteria
Limit value
Conducted via mains cable
150 kHz to 30 MHz
Emitted by the drive
30 MHz to 1 GHz
ESD through air discharge
ESD through contact discharge
Electrical field applied to unit
Test severity level 3
Test severity level 3
Test severity level 3
80 MHz to 1 GHz
Unfiltered devices, not tested.
All devices with an internal/external filter:
Depending on the type of filter and on the envisaged
PDS installation:
Category C1:
Limit value complies with EN 55 011, Class B
Category C2:
Limit value complies with EN 55 011, Class A, Group 1.
In addition, all devices with an internal/external filter
comply with the limit value for category C3 installations.
Limit value complies with EN 55 011, Class A, Group 2.
All devices.
Limit value complies with EN 55 011, Class A, Group 1.
8 kV
6 kV
10 V/m
Applied to all cable
terminations
Test severity level 4
4 kV
Applied to mains cables
Test severity level 3
2 kV
Applied to mains, motor and
control cables
Test severity level 3
0.15 MHz to 80 MHz
80 % AM (1 kHz)
10 V
u and cu listed power conversion equipment of u category NMMS,
in accordance with UL508C.
u list number E121068 and E192450
For use in environments with pollution degree 2.
Also refer to the Internet at
http://www.ul.com
A
Siemens DA 51.2 · 2007/2008
A/5
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Drive ES engineering system
Communication
Configuration/Commissioning
Drive ES
Basic
Drive ES
SIMATIC
G_D212_en_00070
Drive ES is the engineering
system used to integrate
Siemens drive technology into
the SIMATIC automation world
easily, efficiently and cost-effectively in terms of communication, configuration and data
management. The STEP 7
Manager user interface provides the basis for this procedure.
Various software packages
are available for
MICROMASTER:
• Drive ES Basic
for first-time users of the
world of Totally Integrated
Automation and the option
for routing beyond network
limits and the use of the
SIMATIC teleservice.
Drive ES Basic is the basic
software program for setting
the parameters of all drives
online and offline.
Drive ES Basic processes
the automated system and
drives on the interface of the
SIMATIC Manager. Drive ES
Basic is the starting point for
common data archiving for
complete projects and for
extending the use of the
SIMATIC teleservice to
drives. Drive ES Basic provides the engineering tools for
the new motion control functions – peer-to-peer data
traffic, equidistance and isochronous operation with
PROFIBUS DP.
• Drive ES SIMATIC
Simply parameterize the
STEP 7 communication instead of programming.
In order to use
Drive ES SIMATIC STEP 7
must be installed. It features
a SIMATIC function block
library, thereby making the
programming of the
PROFIBUS interface in the
SIMATIC-CPU for the drives
easy and secure.
There is no need for separate, time-consuming programming of the data exchange between the
SIMATIC-CPU and the
drive.
All Drive ES users need to
remember is:
Copy – Modify – Load –
Finished.
Customized, fully-developed function blocks are
copied from the library into
user-specific projects.
Frequently-used functions
are set to run in program
format:
– Read out complete diagnostics buffer automatically from the drive
– Complete parameter sets
are automatically downloaded into the drive from
the SIMATIC CPU – e.g.
when a device has to be
replaced
– Part parameter sets (e.g.
for recipe and product
change) are automatically downloaded into the
drive from the SIMATICCPU
– Complete parameterization or part parameter
sets are uploaded from
the drive into the
SIMATIC-CPU, i.e.
updated.
• Drive ES PCS 7
integrates drives with the
PROFIBUS interface into the
SIMATIC PCS 7 process
control system.
Drive ES PCS 7 can only be
used with SIMATIC PCS 7
Version 5.2 and higher.
Drive ES PCS 7 provides a
function block library with
function blocks for the drives
and the corresponding faceplates for the operator station, which enables the
drives to be operated from
the PCS 7 process control
system.
For further information please
visit us on the Internet at:
http://www.siemens.com/
drivesolutions
■ Selection and ordering data
Description
Drive ES Basic V 5.4
• Requirement: STEP 7 V 5.3
• Configuration software for the inte- and higher, SP3
gration of drives into Totally Inte- • Supply format: on CD-ROM
de, en, fr, es, it
grated Automation
with electronic documentation
Drive ES SIMATIC V 5.4
• Requirement: STEP 7 V 5.3
and higher, SP3
• Function block library for SIMATIC
for the parameterization of com• Supply format: on CD-ROM
munication with the drives
de, en, fr, es, it
with electronic documentation
Drive ES PCS 7 V 6.1
• Function block library for PCS 7
for the integration of drives
• Requirement: PCS 7 V 6.1
• Supply format: on CD-ROM
de, en, fr, es, it
with electronic documentation
A
A/6
Siemens DA 51.2 · 2007/2008
Software
Single license
Multi-user license, 60 pieces
Update service for single-user license
Update service for multi-user license
Upgrade from V 5.x to V 5.4
Single-user license incl. 1 x runtime
license
Runtime license
Update service for single-user license
Upgrade from V 5.x to V 5.4
Single-user license incl. 1 x runtime
license
Runtime license
Update service for single-user license
Upgrade from V 5.x to V 6.1
Order No.
6SW1700-5JA00-4AA0
6SW1700-5JA00-4AA1
6SW1700-0JA00-0AB2
6SW1700-0JA00-1AB2
6SW1700-5JA00-4AA4
6SW1700-5JC00-4AA0
6SW1700-5JC00-1AC0
6SW1700-0JC00-0AB2
6SW1700-5JC00-4AA4
6SW1700-6JD00-1AA0
6SW1700-5JD00-1AC0
6SW1700-0JD00-0AB2
6SW1700-6JD00-1AA4
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Demonstration case
SIDEMO demonstration case system
The SIDEMO range of modular
demonstration case systems
also includes cases for the
MICROMASTER inverters.
The MICROMASTER demonstration cases can be operated on 230 V supplies on their
own or together with other
demonstration systems such
as LOGO!, SIMATIC S7-200,
SITOP DC-UPS.
The demonstration systems
are fitted in dark blue transport
cases (400 x 300 x 210 mm).
The transport cases can be
stacked.
If the MICROMASTER 420/440
demonstration case is expanded with a PROFIBUS
module (not included in scope
of supply of the case), it is also
possible to demonstrate incorporation into TIA in combination with the SIMATIC S7-300
Compact and Touchpanel
TP170B demonstration systems.
SIDEMO demonstration case
Order No.
MICROMASTER 420
• including BOP operator panel
MICROMASTER 440
• including BOP operator panel
MICROMASTER 440
• including BOP operator panel
• the motor is equipped with a load unit
MICROMASTER 440
• including BOP operator panel and pulse encoder evaluation module
• the motor is equipped with an encoder and a load unit
6AG1062-1AA02-0AA0
Weight, approx.
kg
10
6AG1062-1AA02-1AA1
10
6AG1062-1AA06-0AA0
10
6AG1062-1AA07-0AA0
10
Further information, e.g. 110 V versions, is available on the Internet at: http://www.siemens.de/sidemo
■ Standard conversion factors: metric to US units
Unit
Length
Temperature
Weight
Torque
Power
US to metric standard units
1 in. = 25.40 mm
1 ft. = 30.48 cm
1 yd. = 0.91 m
1 mi. = 1.61 km
°C
= 5/9 (°F – 32)
1lbs = 0.454 kg
1lb.ft. = 1.356 Nm
1 hp = 0.746 kW
Metric to US standard units
1 mm = 0.03937 in.
1 cm = 0.39370 in.
1 m = 3.28084 ft.
1 km = 0.62137 mi.
°F
= (9 x °C)/5 + 32
1 kg = 2.205 lbs
1 Nm = 0.738 lb.ft.
1 kW = 1.341 hp
Note:
For kW and hp specifications
in the Selection and Ordering
tables, we do not use calculated hp values but the corresponding standardized hp
motor ratings.
A
Siemens DA 51.2 · 2007/2008
A/7
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Faster and more applicable know-how:
Hands-on training from the manufacturer
SITRAIN® – the Siemens Training for Automation and Industrial
Solutions – provides you with comprehensive support in solving
your tasks.
Training by the market leader in automation and plant engineering enables you to make independent decisions with confidence.
Especially where the optimum and efficient use of products and
plants are concerned. You can eliminate deficiencies in existing
plants, and exclude expensive faulty planning right from the beginning.
■ SITRAIN highlights
Top trainers
Our trainers are skilled teachers with direct practical experience.
Course developers have close contact with product development, and directly pass on their knowledge to the trainers.
Practical experience
The practical experience of our trainers enables them to teach
theory effectively. But since theory can be pretty drab, we attach
great importance to practical exercises which can comprise up
to half of the course time. You can therefore immediately implement your new knowledge in practice. We train you on state-ofthe-art methodically/didactically designed training equipment.
This training approach will give you all the confidence you need.
Wide variety
With a total of about 300 local attendance courses, we train the
complete range of A&D products as well as interaction of the
products in systems. Telecourses, teach-yourself software and
seminars with a presenter on the Web supplement our classic
range of courses.
Tailor-made training
We are only a short distance away. You can find us at more than
50 locations in Germany, and in 62 countries worldwide. You
wish to have individual training instead of one of our
300 courses? Our solution: We will provide a program tailored
exactly to your personal requirements. Training can be carried
out in our Training Centers or at your company.
First-class know-how directly pays for itself: In shorter
startup times, high-quality end products, faster troubleshooting and reduced downtimes. In other words, increased
profits and lower costs.
Achieve more with SITRAIN
• Shorter times for startup, maintenance and servicing
• Optimized production operations
• Reliable configuration and startup
• Minimization of plant downtimes
• Flexible plant adaptation to market requirements
• Compliance with quality standards in production
• Increased employee satisfaction and motivation
• Shorter familiarization times following changes in technology
and staff
■ Contact
Visit our site on the Internet at:
www.siemens.com/sitrain
or let us advise you personally. You can request our latest training catalog from:
SITRAIN Customer Support Germany:
A
Phone: +49 (0)1805 / 23 56 11
(0.14 €/min from the German landline network)
Fax: +49 (0)1805 / 23 56 12
A/8
Siemens DA 51.2 · 2007/2008
The right mixture: Blended learning
“Blended learning” means a combination of various training media and sequences. For example, a local attendance course in
a Training Center can be optimally supplemented by a teachyourself program as preparation or follow-up. Additional effect:
Reduced traveling costs and periods of absence.
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Overview of frequency inverters/converters for SIMATIC ET 200 distributed I/O
Frequency inverters are available for the SIMATIC ET 200
distributed I/O that are fully
system-integrated modules.
Inverters are available for the
finely modular SIMATIC ET
200S FC system to the IP20
degree of protection as well as
for the cabinet-free SIMATIC
ET 200pro FC system to the
IP65 degree of protection.
Main features
Rated outputs
Input voltage
Overall width
Mains frequency
Overload capability
Output frequency
Pulse frequency
Frequency bands
that can be skipped
Efficiency
Interfaces
Standards
conformance
Functional safety
Degree of protection
With a broad range of possibilities, the frequency inverters
expand the functional scope
of the modular modules that
are available in both systems
(e.g. inputs and outputs, technology modules, direct and
soft starters). With suitable interface modules, connection
to PROFIBUS and PROFINET
is possible via the ET 200
system bus as well as integration of PLC functionality into
the system. Fail-safe frequency inverter functions can be
activated locally or via
PROFIsafe.
An overview of the features of
the SIMATIC ET 200S FC frequency inverter series is given
in the table below.
The complete product spectrum including ordering data,
technical data and explanations can be found in Catalog
IK PI “Industrial Communication for Automation and
Drives” and on the Internet at
http://www.siemens.com/
et200s-fc
SIMATIC ET 200S FC
• Complete embedding of a frequency inverter into a distributed I/O system to IP20 degree of protection
• Easy assembly and low susceptibility to errors thanks to self-assembling energy and communications bus
• Space-saving assembly thanks to compact dimensions and common protection
• Fast, tool-free replacement of the frequency inverter for a servicing requirement (hot swapping)
• Frequency control (V/f), vector control with and without encoders
• Line-commutated regenerative feedback by power electronics of the latest generation
• Modular structure with Control Unit (closed-loop control module) and Power Module (power section)
• Frequency inverter variant with integrated, autonomous, fail-safe functions without the need for complex external wiring
0.75 kW, 2.2 kW, 4.0 kW
3 AC 380 … 480 V ±10%
Control Unit + Power Module up to 0.75 kW: 80 mm, otherwise 145 mm
47 … 63 Hz
• Overload current 1.5 × rated output current (i.e. 150% overload) over 60 s, cycle time 300 s
• Overload current 2 × rated output current (i.e. 200% overload) over 3 s, cycle time 300 s
0 … 650 Hz
8 kHz (standard), 2 … 16 kHz (in steps of 2 kHz)
1, programmable
³ 96%
• Connection to PROFIBUS via IM151 interface module
• Connection to PROFINET via IM151-3PN interface module
• Integration of PLC functionality through IM151 CPU and IM151-7 F CPU interface modules
• RS232 interface with USS protocol for commissioning on the PC with the STARTER commissioning software
• Slot for an optional Micro Memory Card for uploading or downloading parameter settings
• PTC/KTY84 interface for motor monitoring
• Speed sensor interface (Sub-D connector) for unipolar HTL incremental encoder
• Activation of the integrated safety functions over PROFIsafe (using the PM-D F PROFIsafe Power Module) or
terminals (using the Safety Local Power Module PM-D F X1)
UL, cUL, CE and c-tick, Low-Voltage Directive 73/23/EEC, EMC Directive 89/336/EEC
Closed-loop control module with integral safety functions to Category 3 of EN 954-1 and SIL 2 of IEC 61508:
• Safety torque off
• Safely limited speed
• Safe stop 1
The safety functions “Safely limited speed” and “Safe stop 1” are certified for encoderless asynchronous motors.
These safety functions are not approved for pull-through loads as in the case of lifting gear and winders
IP20
A
SIMATIC ET 200S FC
Control Units
SIMATIC ET 200S FC
Power Modules
Siemens DA 51.2 · 2007/2008
A/9
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Overview of frequency inverters/converters for SIMATIC ET 200 distributed I/O (continued)
Frequency inverters are available for the SIMATIC ET 200
distributed I/O that are fully
system-integrated modules.
Inverters are available for the
finely modular SIMATIC ET
200S FC system to the IP20
degree of protection as well as
for the cabinet-free SIMATIC
ET 200pro FC system to the
IP65 degree of protection.
Main features
Rated outputs
Input voltage
Overall width
Mains frequency
Overload capability
With a broad range of possibilities, the frequency inverters
expand the functional scope
of the modular modules that
are available in both systems
(e.g. inputs and outputs, technology modules, direct and
soft starters). With suitable interface modules, connection
to PROFIBUS and PROFINET
is possible via the ET 200
system bus as well as integration of PLC functionality into
the system. Fail-safe frequency inverter functions can be
activated locally or via
PROFIsafe.
An overview of the features of
the SIMATIC ET 200pro FC
frequency inverter series is
given in the table below.
The complete product spectrum including ordering data,
technical data and explanations can be found in Catalog
IK PI “Industrial Communication for Automation and
Drives” (SIMATIC ET 200pro
FC will be available soon) and
on the Internet at
http://www.siemens.com/
et200pro-fc
SIMATIC ET 200pro FC
• Complete embedding of a frequency inverter into a distributed I/O system to IP65 degree of protection
• Easy assembly and low susceptibility to errors thanks to self-assembling energy and communications bus
• Fast replacement of the frequency inverter during servicing without interruption of the bus communication to other modules
within the SIMATIC ET 200pro FC
• Frequency control (V/f), vector control without encoders
• Line-commutated regenerative feedback by power electronics of the latest generation
• Frequency inverter variant with integrated, autonomous, fail-safe functions without the need for complex external wiring
1.1 kW (at 0 ¼ 55 °C ambient temperature)
1.5 kW (at 0 ¼ 45 °C ambient temperature)
3 AC 380 … 480 V ±10%
155 mm
47 … 63 Hz
• Overload current 1.5 × rated output current (i.e. 150% overload) over 60 s, cycle time 300 s
• Overload current 2 × rated output current (i.e. 200% overload) over 3 s, cycle time 300 s
0 … 650 Hz
4 kHz (standard)
2 ¼ 16 kHz (in steps of 2 kHz)
Frequency bands that 1, programmable
can be skipped
Efficiency
³ 96%
• Connection to PROFIBUS through IM154-1 and IM154-2 interface modules
Interfaces
• Available soon connection to PROFINET over IM154-4PN interface modules and connection to
IM154-8 CPU interface modules
• Optical interface with USS protocol for fiber-optic RS232 connecting cable
• Control signal for 180 V DC electromagnetic motor brake
• Slot for an optional memory card (MMC) for uploading or downloading parameter settings
• PTC/KTY84 interface for motor temperature monitoring
• Activation of the integrated safety functions through the Safety Local Isolator Module F RSM or through F-Switch PROFIsafe
UL, cUL, CE, Low-Voltage Directive 73/23/EEC, EMC Directive 89/336/EEC
Standards
conformance
Functional safety
Variant with integral safety functions to Category 3 of EN 954-1 and SIL 2 of IEC 61508:
• Safety torque off
• Safely limited speed
• Safe stop 1
The safety functions “Safely limited speed” and “Safe stop 1” are certified for encoderless asynchronous motors.
These safety functions are not approved for pull-through loads as in the case of lifting gear and winders
Degree of protection IP20
Output frequency
Pulse frequency
A
SIMATIC ET 200pro FC
Standard frequency inverter
A/10
Siemens DA 51.2 · 2007/2008
SIMATIC ET 200pro FC Failsafe
Frequency inverter with integrated safety functions
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Overview of SINAMICS G110 inverter chassis units
The SINAMICS G110 inverter
chassis unit is a versatile
drive. The table provides an
overview of the features of this
Main features
Electrical data
Supply voltages,
output range
Network types
Mains frequency
Output frequency
Control method
Fixed frequencies
Skip frequency ranges
Digital inputs
Analog input
(for the analog version)
Digital output
Communication interface
(for USS version)
Software
functions
Functions
Protection functions
Connectable motors
Mechanical data
Degree of protection
Type of cooling for
£ 0.75 kW inverters
> 0.75 kW inverters
Standards
Standards complied with
product. The complete range
of products together with ordering data, technical data
and explanations are indica-
ted in the D 11.1 Catalog
“SINAMICS G110/SINAMICS
G120 Inverter Chassis Units
and SINAMICS G120D
Distributed Frequency Inverters” and in the Internet under:
http://www.siemens.com/
sinamics-g110
SINAMICS G110
As “a versatile drive for small outputs”, the frequency inverter of the SINAMICS G110 inverter chassis units
can be used for a wide range of industrial drive applications with variable speeds. The especially compact
SINAMICS G110 inverter works with voltage-frequency control (V/f) and is the ideal frequency inverter in the
lower output and performance range of the SINAMICS family of products. The inverter is available in three frames
for connection to single-phase power supply systems.
1 AC 200 V ... 240 V, ±10%; 0.12 kW ... 3.0 kW
IT, TN, TT
50/60 Hz
0 Hz ... 650 Hz
V/f control, linear (M~n)
V/f control, quadratic (M~n2)
V/f control, programmable
3, programmable
1, programmable
3 programmable digital inputs 24 V DC
1 analog input for setpoints from 0 V to 10 V, scalable or usable as 4th digital input
1 digital output 24 V DC
RS485 serial interface for operation with USS protocol
• Automatic restart after interruption of operation due to supply failure
• Jerk-free connection of inverter to rotating motor
• Programmable ramp-up/ramp-down times
• Ramp rounding
• Undervoltage
• Overvoltage
• Earth fault
• Short-circuit
• Stall prevention
• I2t motor thermal protection
• Inverter overtemperature
• Motor overtemperature
Asynchronous motors
IP20
Ribbed heat sink with convection cooling; version with flat heat sink also available
Internal air cooling (integrated fan)
CE, UL, cUL, c-tick
A
SINAMICS G110 inverter chassis units
Siemens DA 51.2 · 2007/2008
A/11
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Overview of SINAMICS G120 inverter chassis units
The SINAMICS G120 inverter
chassis unit is a modular drive. The table provides an
overview of the features of this
product. The complete range
Main features
Electrical data
Supply voltages,
output range
Network types
Mains frequency
Output frequency
Control method
Fixed frequencies
Digital inputs
Analog input
(for the analog version)
Digital output
Communication interface
Functions
Software functions
Protection functions
Safety Integrated Functions
Connectable motors
Mechanical data
Degree of protection
Cooling method
Standards
Standards complied with
of products together with ordering data, technical data
and explanations are indicated in the D 11.1 Catalog
“SINAMICS G110/SINAMICS
http://www.siemens.com/
sinamics-g120
SINAMICS G120
As “a modular single drive for low and medium outputs”, the frequency inverter of the
SINAMICS G120 inverter chassis units can be used for a wide range of industrial drive applications.
The SINAMICS G120 frequency inverter distinguishes itself through its modular design (Power Module and
Control Unit), and the globally unique integration of numerous innovative functions in safety technology and
regenerative feedback into the line supply. There are extensive system components available in the range from
0.37 to 90 kW. This means that the drive units are suitable for a multitude of drive applications.
3 AC 380 V ... 480 V, ±10%; 0.37 kW ... 90 kW
IT, TN, TT
47 ... 63 Hz
0 Hz ... 650 Hz
V/f control, linear (M~n)
V/f control, quadratic (M~n²) and parameterizable sensorless vector control,
vector control with encoder (closed control loop)
Torque control
16, programmable
up to 9 digital inputs, depending on the Control Unit
24 V DC
up to 2 analog inputs (0 V to 10 V)
3 digital inputs
RS485/USS; PROFIBUS; PROFINET
• Programmable ramp-up times 0 … 650 s, ramp rounding
• Automatic restart after interruption of operation due to supply failure
• Flying restart
• Signals are locally pre-processed using free function blocks
• 3 selectable motor data sets
• High-quality internal PID controller for simple process control
• Positioning ramp down
• Kinetic buffering
• Motor temperature (PTC/KTY, I²t)
• Power unit and load cycle monitoring
• Overvoltage and undervoltage
• Earth fault
• Stall prevention
• System protection functions
STO, SS1, SLS, SBC
Asynchronous motors
IP20
Innovative cooling concept;
the power electronics are cooled by means of heat sinks with an external fan;
open-loop and closed-loop control electronics are cooled by convection
CE, UL, cUL, c-tick, Safety Integrated IEC 61508/SIL 2
A
SINAMICS G120 inverter chassis units
A/12
G120 Inverter Chassis Units
and SINAMICS G120D Distributed Frequency Inverters”
and in the Internet under:
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Overview of SINAMICS G120D distributed frequency inverter
The SINAMICS G120D frequency inverter is a modular
drive. The table provides an
overview of the features of this
product. The complete range
Main features
Electrical data
Supply voltages,
output range
Network types
Mains frequency
Output frequency
Control method
Fixed frequencies
Digital inputs
Analog input
(for the analog version)
Digital output
Communication interface
Functions
Software functions
Protection functions
Safety Integrated Functions
Connectable motors
Mechanical data
Degree of protection
Cooling method
Standards
Standards complied with
of products together with ordering data, technical data
and explanations are indicated in the D 11.1 Catalog
“SINAMICS G110/SINAMICS
G120 Inverter Chassis Units
and SINAMICS G120D Distributed Frequency Inverters”
and in the Internet under:
http://www.siemens.com/
sinamics-g120d
SINAMICS G120D
“The modular drive for low and medium outputs” – the SINAMICS G120D distributed frequency inverter can
be especially used for sophisticated conveyor applications in industry as for many other high-performance applications. The SINAMICS G120 frequency inverter distinguishes itself through its modular design (Power Module
and Control Unit) as well as through its extremely flat type of construction, an identical drilling template for all outputs and a high degree of safety. It offers safety functions that are unique in its class. It helps to save significant
amounts of energy as a result of its line-commutated regenerative feedback capability. It goes without saying that
the frequency inverter is also capable of communications.
3 AC 380 V ... 480 V, ±10%; 0.75 kW ... 7.5 kW
IT, TN, TT
47 ... 63 Hz
0 Hz ... 650 Hz
V/f control, linear (M~n)
V/f control, quadratic (M~n²) and parameterizable sensorless vector control,
vector control with encoder (closed control loop)
Torque control
16, programmable
up to 6 digital inputs, depending on the Control Unit
24 V DC
up to 2 analog inputs (0 V to 10 V)
3 digital inputs
PROFIBUS; PROFINET
• Programmable ramp-up times 0 … 650 s, ramp rounding
• Automatic restart after interruption of operation due to supply failure
• Flying restart
• Signals are locally pre-processed using free function blocks
• 3 selectable motor data sets
• High-quality internal PID controller for simple process control
• Positioning ramp down
• Kinetic buffering
• Motor temperature (PTC/KTY, I²t)
• Power unit and load cycle monitoring
• Overvoltage and undervoltage
• Earth fault
• Stall prevention
• System protection functions
STO, SS1, SLS
Asynchronous motors
IP65
Convection cooling, for higher outputs with fan
CE, UL, cUL, c-tick, Safety Integrated IEC 61508/SIL 2
A
SINAMICS G120D distributed frequency inverter
Siemens DA 51.2 · 2007/2008
A/13
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Overview of IEC squirrel-cage motors
With an output range from
0.06 to 1250 kW, low-voltage
motors are available for the
widest range of requirements
and applications that are harmonized and coordinated with
the MICROMASTER and
SINAMICS frequency inverters.
The table shows an overview
of the technical features of
these motors. You will find the
available product range with
ordering data, technical data
and detailed explanations in
Catalog D 81.1 “Low-Voltage
IEC Squirrel-Cage Motors
Energy-saving motors
Versions
A
In addition to energy-saving
motors and explosion-proof
motors, there are also sector
and customer-specific motors
such as smoke extraction
motors.
Motors – IEC Squirrel-Cage
Motors – Frame Sizes 56 to
450” and
in the Internet under:
http://www.siemens.com/
motors
Smoke extraction motors
Aluminum housing
Gray cast housing
Rated power
Frame sizes
0.06 ... 45 kW
56 M to 225
0.75 ... 1250 kW
100 L to 450
Type of construction
Speed
Rated torque
Rated voltages
All common types of construction
750 ... 3000 rpm
0.3 ... 292 Nm
All commonly used voltages
All common types of construction
750 ... 3000 rpm
9.9 ... 10300 Nm
All commonly used voltages
Designation
EFF1, EFF2
EFF1, EFF2
All common types of construction
1000 ... 3000 rpm
2.5 ... 1546 Nm
230VD/400 VY,
500 VD,
400VD/690 VY,
500 VY
EFF1, EFF2
Degree of protection
IP55
IP55
IP55
Housing
Aluminum
Gray iron
Aluminum
Gray iron
Cooling type
Temperature class
Surface-cooled
155 (F) utilized to 130 (B) / 155 (F)
Surface-cooled
155 (F) utilized to 130 (B) / 155 (F)
Surface-cooled
155 (F) utilized to 130 (B)
Approvals
CE, CCC, UL, CSA
CE, CCC, UL, CSA
CE
Approvals for marine propulsion
drives
Explosion protection
(incl. temp. class)
Below deck use:
BV, DNV, GL, LR
Ex nA II T3 (Zone 2),
Dust-ex (Zone 21, 22)
Below deck use:
BV, DNV, GL, LR
Ex nA II T3 (Zone 2),
Dust-ex (Zone 21, 22)
No
Examples, energy-saving motors
A/14
Siemens DA 51.2 · 2007/2008
Example, smoke extraction motors
Temp.-time classes F200/F300/
F400
0.37 ... 200 kW
80 M to 315 L
No
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Overview of IEC squirrel-cage motors
Versions
IEC Squirrel-Cage Motors
Explosion-proof motors
Type of protection “e”
Type of protection “d”
Type of protection “n”
Rated power
Frame sizes
0.12 ... 165 kW
63 M to 315 L
0.25 ... 950 kW
71 M to 450
0.09 ... 1000 kW
63 M to 450
Type of construction
All common types of construction
1000 ... 3000 rpm
0.61 ... 1300 Nm
All commonly
used voltages
All common types of construction
750 ... 3000 rpm
1 ... 8579 Nm
All commonly
used voltages
All common types of construction
750 ... 3000 rpm
1 ... 8090 Nm
All commonly
used voltages
Dust explosion protection
0.06 ... 1000 kW
Zone 21:
56 M to 315 L
Zone 22:
56 M to 450
All common types of construction
750 ... 3000 rpm
0.3 ... 8090 Nm
All commonly
used voltages
Designation
See Catalog D 81.1
See Catalog D 81.1
Degree of protection
IP55, IP56 (non-heavysea), IP65
FS 63 ... 160 L
Aluminum
FS 100 L ... 315 L
Gray iron
Surface-cooled
155 (F) utilized to 130 (B) /
155 (F)
IP55, IP56 (non-heavysea)
FS 71 M ... 315 L
Gray iron
FS 355 ... 450
Steel
Surface-cooled
155 (F) utilized to 130 (B)
(line operation)
155 (F) utilized to 155 (F)
(frequency inverter operation)
CE, CCC, GOST, ATEX,
NEPSI
Below deck use:
BV, DNV, GL, LR
II 2G Ex de IIC
T1-T4
Analog
energy-saving motors
EFF1/EFF2
IP55, IP56 (non-heavysea), IP65
FS 63 M ... 160L
Aluminum
FS 100 L ... 450
Gray iron
Surface-cooled
155 (F) utilized to 130 (B)
Analog
energy-saving motors
EFF1/EFF2
Zone 21: IP65
Zone 22: IP55
FS 63 M ... 225 M
Aluminum
FS 100 L ... 450
Gray iron
Surface-cooled
155 (F) utilized to 130 (B)
CE, CCC, GOST, ATEX,
NEPSI
Below deck use:
BV, DNV, GL, LR
II 3G Ex nA II
T3
CE, CCC, GOST, ATEX
Speed
Rated torque
Rated voltages
Housing
Cooling type
Temperature class
Approvals
CE, CCC, GOST, ATEX
Approvals for marine propulsion
drives
Explosion protection
(incl. temp. class)
Below deck use:
BV, DNV, GL, LR
II 2G Ex e II
T1-T3
Below deck use:
BV, DNV, GL, LR
Zone 21: II 2D Ex tD A21
IP65 T125 °C
Zone 22: II 3D Ex tD A22
IP55 T125 °C
A
Examples, explosion-proof motors
Siemens DA 51.2 · 2007/2008
A/15
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Overview of IEC squirrel-cage motors – new generation 1LE1
Increasing energy costs have
resulted in greater emphasis
on the power consumption of
drive systems. It is extremely
important to utilize the full potential for minimization here to
secure competitiveness today
and in the future. This is the
reason that already today,
Siemens is developing a new
generation of low-voltage motors. Innovative copper rotors
create the best requisites for
motors with high efficiencies.
The new motors for EFF1
(High Efficiency) offer considerable energy savings and
protect our environment.
The table shows an overview
of the technical features of
these motors. The presently
available product range with
ordering data, technical data
and detailed explanations are
provided in the new Catalog
News D 81.1 N “Low-Voltage
Motors – IEC Squirrel-Cage
Motors – New Generation
1LE1 – Frame Size 100 to 160”
and
in the Internet under:
http://www.siemens.com/
motors
IEC Squirrel-Cage Motors – new generation 1LE1
Self-cooled energy-saving motors with:
• Improved efficiency (EFF2)
• High efficiency (EFF1)
Versions
Self-cooled motors with increased output and:
• Improved efficiency (EFF2)
• High efficiency (EFF1)
Rated power
Frame sizes
Type of construction
Forced-air-cooled motors without external fan and fan cover with:
• Improved efficiency (EFF2)
• High efficiency (EFF1)
0.75 ... 22 kW
100 L to 160 L
Without flange:
IM B3, IM B6, IM B7, IM B8, IM V5 without protective cover, IM V6, IM V5 with protective cover
With flange:
IM B5, IM V1 without protective cover, IM V1 with protective cover, IM V3, IM B35
Speed
Rated torque
Rated voltages
Designation
Degree of protection
Housing
Cooling type
Temperature class
Approvals
With standard flange:
IM B14, IM V19, IM V18 without protective cover, IM V18 with protective cover, IM B34
750 ... 3000 rpm
9.9 ... 150 Nm
All commonly used voltages
EU/CEMEP efficiency classification: EFF1: 2-, 4-pole, EFF2: 2-, 4-pole
US Energy Policy Act EPACT: 2-, 4-, 6-pole (available soon)
IP55 as standard
Aluminum
Self-cooled: Frame size 100 L to 160 L (IC 411),
Forced-air cooled: Frame size 100 L to 160 L (IC 416)
Temperature class 155 (F), utilized to temperature class 130 (B)
CE
Examples, IEC squirrel-cage motors – new generation 1LE1, aluminum housing
A
A/16
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Overview of distributed drive solutions – MICROMASTER 411 and COMBIMASTER 411 inverters
The MICROMASTER 411 and
COMBIMASTER 411 inverters
from Siemens are available as
distributed drive solutions.
The table provides an over-
Main features
Output range
Voltage range
Frame sizes/
unit sizes
Types of construction
Degree of protection
Other technical features
view of the features of these
products. The complete range
of products together with
ordering data, technical data
and explanations are indicat-
ed in the Catalog DA 51.3
MICROMASTER 411 and
COMBIMASTER 411.
The latest information on
MICROMASTER 411 and
COMBIMASTER 411 is available in the Internet under:
http://www.siemens.com/
combimaster
MICROMASTER 411
COMBIMASTER 411
“The distributed inverter” for a wide range of drive applications – for simple individual applications from pumps and
fans to multiple conveyor-belt drives in networked control systems.
0.37 kW ... 3 kW
3 AC 380 V ... 480 V
CS B
71 ...100
CS C
90/100
IM B3
IM B5
IM V1 (without protective cover)
IM V1 (with protective cover)
IM B14 (with normal flange)
IM B14 (with special flange)
IM B35
IP65
IP55
• V/f characteristic
• Multipoint characteristic (programmable V/f characteristic)
• FCC (flux current control)
• Internal PI controller
• 3 digital inputs
• 1 analog input
• 1 relay output
• Compound braking for controlled rapid braking
• ECOFAST versions with plug-in connectors for power-supply, communication interface and motor connections
in order to enable fast and problem-free information exchange in applications where time is a critical factor.
The ECOFAST versions are completely compatible with the ECOFAST technology systems.
Examples MICROMASTER 411
Examples COMBIMASTER 411
A
Siemens DA 51.2 · 2007/2008
A/17
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Overview of NEMA motors
For compliance with the local
specifications of the NAFTA
markets (USA, Canada and
Mexico), we manufacture lowvoltage motors acc. to the
NEMA standard for a wide
range of different application
areas.
Frame size
Output range
Number of poles
Voltages
Frequency
Type of construction
Casing
Cooling method
Temperature class
Type spectrum
This includes motors designed in accordance with the
US act, EPACT (specified minimum efficiency levels), as
well as motors with NEMA premium efficiency levels: Our
NEMA motor series provide
the highest operating reliability and maximum service life.
Designed and manufactured
for rugged operation, our
NEMA motors conquer even
the harshest industrial conditions strictly in accordance
with the ISO 9001 international
quality standard; with maximum performance, reliability
and efficiency.
You will find the complete
range of products together
with ordering data, technical
data and explanations in
Catalog D 81.2 U.S./Canada
on the Internet at
http://www.sea.siemens.com/
motors
NEMA motors (NEMA = National Electrical Manufacturers Association)
NEMA frame size 56 ... 449
0.25 HP ... 500 HP
2/4/6/8
3 AC 230/460/575 V
60 Hz, 50 Hz on request
Foot-mounted, D flange, C flange, P flange
Cast-iron, aluminium or steel depending on the version
Surface-cooling or internal ventilation depending on the version
F used acc. to B
General purpose motors
• Legally specified minimum efficiency levels or NEMA premium efficiency levels
• Standard motors for general industrial use
• Aluminium or cast-iron case depending on the version
Severe duty motors
• Legally specified minimum efficiency levels or NEMA premium efficiency levels
• Cast-iron case
• Motors for use under extremely difficult environmental conditions
Severe duty IEEE841 motors
• Efficiency levels required by IEEE that exceed the EPACT act
• Motors with increased requirements for use in the petrochemical industry (according to IEEE841)
• Cast-iron case
Explosion-proof motors
• Efficiency levels better than or equal to EPACT
• Multi label according to Division 1, Class I, Group D and Class II, Groups F&G
• Single label according to Division 1, Class I, Groups C&D
Example of NEMA motor, Severe Duty SD100, cast-iron case
A
A/18
Siemens DA 51.2 · 2007/2008
Example of NEMA motor, General Purpose GP10A, aluminium case
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Siemens contacts worldwide
At
http://www.siemens.com/automation/partner
you can find details of Siemens contact partners worldwide
responsible for particular technologies.
You can obtain in most cases a contact partner for
• Technical Support,
• Spare parts/repairs,
• Service,
• Training,
• Sales or
• Consultation/engineering.
You start by selecting a
• Country,
• Product or
• Sector.
By further specifying the remaining criteria you will find exactly
the right contact partner with his/her respective expertise.
A
Siemens DA 51.2 · 2007/2008
A/19
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ A&D in the WWW
A detailed knowledge of the range of products and services
available is essential when planning and configuring automation
systems. It goes without saying that this information must always
be fully up-to-date.
The Siemens Automation and Drives Group (A&D) has therefore
built up a comprehensive range of information in the World Wide
Web, which offers quick and easy access to all data required.
Under the address
http://www.siemens.com/automation
you will find everything you need to know about products, systems and services.
■ Product selection using the Offline Mall of Automation and Drives
Detailed information together with convenient interactive
functions:
The Offline Mall CA 01 covers more than 80,000 products and
thus provides a full summary of the Siemens Automation and
Drives product base.
Here you will find everything that you need to solve tasks in the
fields of automation, switchgear, installation and drives.
All information is linked into a user interface which is easy to
work with and intuitive.
After selecting the product of your choice you can order at the
press of a button, by fax or by online link.
Information on the Offline Mall CA 01 can be found in the Internet
under
http://www.siemens.com/automation/ca01
or on CD-ROM or DVD.
■ Easy shopping with the A&D Mall
The A&D Mall is the virtual department store of Siemens AG in
the Internet. Here you have access to a huge range of products
presented in electronic catalogs in an informative and attractive
way.
Data transfer via EDIFACT allows the whole procedure from
selection through ordering to tracking of the order to be carried
out online via the Internet.
Numerous functions are available to support you.
For example, powerful search functions make it easy to find the
required products, which can be immediately checked for availability. Customer-specific discounts and preparation of quotes
can be carried out online as well as order tracking and tracing.
Please visit the A&D Mall on the Internet under:
http://www.siemens.com/automation/mall
A
A/20
Siemens DA 51.2 · 2007/2008
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Technical consulting
Support in the planning and designing of your project from detailed actual-state analysis, target definition and consulting on
product and system questions right to the creation of the automation solution. 1)
■ Configuration and software engineering
Support in configuring and developing with customer-oriented
services from actual configuration to implementation of the
automation project. 1)
■ Service on site
With service on site we offer
services for startup and maintenance, essential for ensuring
system availability.
In Germany
Phone: +49 (0)180 50 50 444 1)
(0.14 €/min. from the German
fixed network)
In the United States, call
toll-free:
Phone: +1 800 333 7421
In Canada, call:
Phone: +1 888 303 3353
I
In the face of harsh competition you need optimum conditions to
keep ahead all the time:
a strong starting position, a sophisticated strategy and team for
the necessary support – in every phase.
Service & Support from Siemens provides this support with a
complete range of different services for automation and drives.
In every phase: from planning and commissioning to maintenance and upgrading.
Our specialists know when and where to act to keep the productivity and cost-effectiveness of your system running in top form.
■ Online support
■ Technical support
The comprehensive information
system available round the
clock via Internet ranging from
Product Support and Service &
Support services to Support
Tools in the Shop.
http://www.siemens.com/
automation/service&support
Competent consulting in technical questions covering a wide
range of customer-oriented services for all our products and
systems.
Phone: +49 (0)180 50 50 222
Fax:
+49 (0)180 50 50 223
(0.14 €/min. from the German
fixed network)
E-Mail:
[email protected]
In the United States, call
toll-free:
Phone: +1 800 333 7421
Fax:
+1 423 262 2200
E-Mail: solutions.support
@sea.siemens.com
In Canada, call:
Phone: +1 888 303 3353
E-Mail: [email protected]
In Asia:
Phone: +86 10 6475 7575
Fax:
+86 10 6474 7474
E-Mail:
[email protected]
1) For country-specific telephone numbers go to our Internet site at:
http://www.siemens.com/automation/service&support
■ Repairs and spare parts
■ Optimization and upgrading
In the operating phase of a machine or automation system we
provide a comprehensive repair
and spare parts service ensuring the highest degree of operating safety and reliability.
In Germany
Phone: +49 (0)180 50 50 448 1)
(0.14 €/min. from the German
fixed network)
In the United States, call
toll-free:
Phone: +1 800 241 4453
In Canada, call:
Phone: +1 888 303 3353
To enhance productivity and
save costs in your project we
offer high-quality services in
optimization and upgrading. 1)
■ SPARESonWeb – online spare parts catalog
SPARESonWeb is a web-based
tool for selecting the spare parts
available for the SINAMICS system. After you have registered
and entered the serial number
and order number, the spare
parts available for the relevant
unit are displayed.
The delivery state for specific orders can be displayed for all
shipped SINAMICS products.
http://workplace.automation.
siemens.com/sparesonweb
Siemens DA 51.2 · 2007/2008
A/21
A
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Subject index
MICROMASTER
MICROMASTER
420
430
440
Page
Page
Page
Page
A
AAOP (operator panel)
AOP (operator panel)
Applications
Assignment table for options
1/4
2/16
2/16
2/2
1/4
3/2
1/4
4/22
4/22
4/2
1/4
B
BOP (operator panel)
BOP-2 (operator panel)
Brake resistor (option)
-
2/16
-
3/16
-
4/22
4/17
C
CANopen module
CAOP (operator panel)
CE marking
Certificates
Chokes (options)
Circuit diagrams
Circuit-breaker (option)
COMBIMASTER 411 (overview)
Communications modules
Compliance with standards
Conditions of sale and delivery
A/4
A/2
A/17
A/4
A/24
2/16
2/16
A/4
A/2
2/13
2/4
2/14
A/17
2/16
A/4
A/24
3/16
A/4
A/2
3/14
3/4
3/14
A/17
3/16
A/4
A/24
4/22
4/22
A/4
A/2
4/17
4/4
4/18
A/17
4/22
A/4
A/24
D
Demonstration case
Derating data
Description (inverter)
Description (options)
Design
DeviceNet module (option)
Dimension drawings
Docu pack
Documentation
Drive ES
Drive ES software
DriveMonitor
A/7
A/6
A/6
-
A/7
2/7
2/2
2/9
2/2
2/16
2/18
2/17
2/17
A/6
A/6
2/15
A/7
3/7
3/2
3/10
3/2
3/16
3/19
3/18
3/18
A/6
A/6
3/16
A/7
4/7
4/2
4/12
4/2
4/22
4/26
4/25
4/25
A/6
A/6
4/22
E
Electromagnetic compatibility
EMC filter (option)
Environment, resources and recycling
Export regulations
A/5
A/2
A/24
A/5
2/12
A/2
A/24
A/5
3/14
A/2
A/24
A/5
4/16
A/2
A/24
F
Features
Filter (option)
Fuses (options)
-
2/3
2/12
2/14
3/3
3/14
3/14
4/3
4/16
4/18
G
General circuit diagram
Getting Started Guide
-
2/4
2/17
3/4
3/18
4/4
4/25
I
Installation altitude (derating)
Integration with Drive ES
International standards
Internet (online services)
A
4..
L
LC filter
Line commutating chokes
(option)
A/22
A/6
A/20
2/7
A/6
2/2
A/20
3/8
A/6
3/2
A/20
4/8
A/6
4/2
A/20
-
2/13
3/14
4/17
-
2/13
3/14
4/16
Siemens DA 51.2 · 2007/2008
4..
420
430
440
Page
Page
Page
Page
-
3/2
3/3
A/17
A/14
4/2
4/3
A/17
A/14
M
Main characteristics
Mechanical features
MICROMASTER 411 (overview)
Motors (overview)
A/17
A/14
2/2
2/3
A/17
A/14
N
NEMA motors (overview)
Notes on ordering
A/18
A/23
A/18
A/23
A/18
A/23
A/18
A/23
O
Online services
Operating instructions
Operating temperature (derating)
Operator panels
Options
Ordering data (inverter)
Ordering data (options)
Output chokes (option)
Overview
A/20
1/4
1/4
1/2
A/20
2/17
2/7
2/16
2/9
2/8
2/12
2/13
1/2
A/20
3/18
3/7
3/16
3/10
3/9
3/14
3/14
1/3
A/20
4/25
4/8
4/22
4/12
4/9
4/16
4/17
1/3
-
2/17
2/3
2/16
2/3
3/18
3/3
3/16
3/3
4/25
4/3
4/22
4/3
-
2/7
3/7
4/22
4/7
-
2/8
3/9
4/9
1/2
A/21
A/7
A/19
A/21
2/11
1/2
A/21
A/7
A/19
2/16
2/15
A/21
3/14
1/3
A/21
A/7
A/19
3/14
3/16
3/16
A/21
4/16
1/3
A/21
A/7
A/19
4/17
4/22
4/22
A/21
-
3/6
3/10
3/5
3/14
A/8
4/6
4/12
4/5
4/18
A/8
P
Parameter list
Performance features
PROFIBUS module (option)
Protection features
Pulse encoder evaluation
module (option)
Pulse frequency (derating)
S
Selection and ordering data
(inverter)
Selection and ordering data
(options)
Selection guide
Service and support
SIDEMO (demonstration case system)
Siemens contacts worldwide
Sinusoidal filter
STARTER
Start-up tools
Support
T
Technical data (inverter)
Technical data (options)
Terminal connection diagram
Terminal connection plates (option)
Training
A/8
2/6
2/10
2/5
2/14
A/8
U
UL listing
A/5
A/5
A/5
A/5
V
Variant dependent options
Variant independent options
-
2/12
2/16
3/14
3/16
4/16
4/22
-
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Order No. index
■ Notes on ordering
Versions/variants
MICROMASTER
420
430
440
Page
Page
Page
3NA3...
2/14
3/14, 3/15
4/18, 4/20
3NE1...
-
3/14, 3/15
4/18, 4/20
3RV10..
2/14
3/14, 3/15
4/18, 4/20
3VL....
-
3/14, 3/15
4/18, 4/20
6AG1062-1AA..
A/7
-
A/7
6GK1500-0FC00
2/16
3/16
4/22
6SE6400-0AP00-0AA1
6SE6400-0AP00-0AB0
6SE6400-0AP00-0CA0
6SE6400-0BE00-0AA0
6SE6400-0BP00-0AA0
6SE6400-0EN00-0AA0
6SE6400-0GP00-0.A0
6SE6400-0MD00-0AA0
6SE6400-0P.00-0AA0
6SE6400-1CB00-0AA0
6SE6400-1DN00-0AA0
6SE6400-1P.00-0AA0
2/16
2/16
2/16
2/16
2/14
2/16
2/16
2/16
2/16
2/16
3/16
3/14
3/16
3/16
3/16
3/16
4/22
4/22
4/22
4/22
4/22
4/18, 4/19
4/22
4/22
4/22
4/22
4/22
6SE6400-2FA0.
6SE6400-2FB0.
6SE6400-2FL0.
6SE6400-2FS0.
2/12
2/12
2/13
2/12
3/15
4/16
4/16
4/16
4/19
6SE6400-3CC..
6SE6400-3TC..
6SE6400-3TD..
2/13
2/13
2/13
3/14, 3/15
3/14, 3/15
3/14, 3/15
4/16, 4/19
4/17, 4/19
4/17, 4/19
6SE6400-4B...
-
-
4/17, 4/19
6SE6400-5....
2/17
3/18
4/25
6SE6420-2AB..
6SE6420-2AC..
6SE6420-2AD..
6SE6420-2UC..
6SE6420-2UD..
2/8
2/8
2/8
2/8
2/8
-
-
6SE6430-2AD..
6SE6430-2UD..
-
3/9
3/9
-
6SE6440-2AB..
6SE6440-2AC..
6SE6440-2AD..
6SE6440-2UC..
6SE6440-2UD..
6SE6440-2UE..
-
-
4/11
4/11
4/11
4/9
4/9
4/10
6SL3000-0BE3.
6SL3000-0CE3.
6SL3000-2BE..
6SL3000-2CE..
-
3/14
3/14
3/14
3/14
4/16
4/17
4/17
4/16
6SL3072-0AA0.
2/16
3/16
4/22
6SW1700-0J...
6SW1700-5J...
6SW1700-6J...
A/6
A/6
A/6
A/6
A/6
A/6
A/6
A/6
A/6
6ZB5310-0K...
A/24
A/24
A/24
The last digit of the complete Order No. for the
inverters represents the
release version.
When ordering, a different
digit from the one specified
may be present as a result
of further technical development.
A
Siemens DA 51.2 · 2007/2008
A/23
© Siemens AG 2007
MICROMASTER 420/430/440
Appendix
■ Terms and Conditions of Sale and Delivery
By using this catalog you can acquire hardware and software
products described therein from Siemens AG subject to the following terms. Please note! The scope, the quality and the conditions for supplies and services, including software products, by
any Siemens entity having a registered office outside of Germany, shall be subject exclusively to the General Terms and
Conditions of the respective Siemens entity. The following terms
apply exclusively for orders placed with Siemens AG.
For customers with a seat or registered office in Germany
The “General Terms of Payment” as well as the “General Conditions for the Supply of Products and Services of the Electrical
and Electronics Industry” shall apply.
For software products, the “General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office in Germany” shall apply.
For customers with a seat or registered office outside of
Germany
The “General Terms of Payment” as well as the “General Conditions for Supplies of Siemens, Automation and Drives for Customers with a Seat or registered Office outside of Germany” shall
apply.
For software products, the “General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office outside of Germany” shall apply.
General
The dimensions are in mm. In Germany, according to the German law on units in measuring technology, data in inches only
apply to devices for export.
Illustrations are not binding.
Insofar as there are no remarks on the corresponding pages,
- especially with regard to data, dimensions and weights given these are subject to change without prior notice.
The prices are in € (Euro) ex works, exclusive packaging.
The sales tax (value added tax) is not included in the prices.
It shall be debited separately at the respective rate according to
the applicable legal regulations.
Prices are subject to change without prior notice. We will debit
the prices valid at the time of delivery.
Surcharges will be added to the prices of products that contain
silver, copper, aluminum, lead and/or gold if the respective basic
official prices for these metals are exceeded. These surcharges
will be determined based on the official price and the metal factor of the respective product.
The surcharge will be calculated on the basis of the official price
on the day prior to receipt of the order or prior to the release
order.
The metal factor determines the official price as of which the
metal surcharges are charged and the calculation method used.
The metal factor, provided it is relevant, is included with the price
information of the respective products.
A
A/24
Siemens DA 51.2 · 2007/2008
An exact explanation of the metal factor and the text of the
Comprehensive Terms and Conditions of Sale and Delivery are
available free of charge from your local Siemens business office
under the following Order Nos.:
• 6ZB5310-0KR30-0BA1
(for customers based in Germany)
• 6ZB5310-0KS53-0BA1
(for customers based outside Germany)
or download them from the Internet
http://www.siemens.com/automation/mall
(Germany: A&D Mall Online-Help System)
■ Export regulations
The products listed in this catalog may be subject to European /
German and/or US export regulations.
Therefore, any export requiring a license is subject to approval
by the competent authorities.
According to current provisions, the following export regulations
must be observed with respect to the products featured in this
catalog:
AL
Number of the German Export List
Products marked other than “N” require an export
license.
In the case of software products, the export designations of the relevant data medium must also
be generally adhered to.
Goods labeled with an “AL“ not equal to “N” are
subject to a European or German export authorization when being exported out of the EU.
ECCN
Export Control Classification Number
Products marked other than “N” are subject to a
reexport license to specific countries.
In the case of software products, the export
designations of the relevant data medium must
also be generally adhered to.
Goods labeled with an “ECCN“ not equal to “N”
are subject to a US re-export authorization.
Even without a label or with an “AL: N” or “ECCN: N”, authorization may be required due to the final destination and purpose for
which the goods are to be used.
The deciding factors are the AL or ECCN export authorization
indicated on order confirmations, delivery notes and invoices.
Errors excepted and subject to change without prior notice.
A&D/VuL_ohne MZ/En 05.09.06
© Siemens AG 2007
Catalogs of the
Automation and Drives Group (A&D)
Further information can be obtained from our branch offices listed
in the appendix or at www.siemens.com/automation/partner
Automation and Drives
Interactive catalog on CD-ROM and on DVD
Catalog
• The Offline Mall of Automation and Drives
CA 01
Automation Systems for Machine Tools
SINUMERIK & SIMODRIVE
NC 60
SINUMERIK & SINAMICS
NC 61
Drive Systems
Variable-Speed Drives
Industrial Communication for
Automation and Drives
Catalog
IK PI
Low-Voltage
Controls and Distribution –
SIRIUS, SENTRON, SIVACON
LV 1
Controls and Distribution –
Technical Information
SIRIUS, SENTRON, SIVACON
LV 1 T
SIDAC Reactors and Filters
LV 60
SIVENT Fans
LV 65
SIVACON 8PS Busbar Trunking Systems
LV 70
Motion Control System SIMOTION
PM 10
SINAMICS G110/SINAMICS G120
Inverter Chassis Units
SINAMICS G120D
Distributed Frequency Inverters
D 11.1
SINAMICS G130 Drive Converter Chassis Units,
SINAMICS G150 Drive Converter Cabinet Units
D 11
SINAMICS GM150/SINAMICS SM150
Medium-Voltage Converters
D 12
SINAMICS S120 Drive Converter Systems
D 21.1
SINAMICS S150 Drive Converter Cabinet Units
D 21.3
Asynchronous Motors Standardline
D 86.1
Process Instrumentation and Analytics
Field Instruments for Process Automation
Measuring Instruments for Pressure,
Differential Pressure, Flow, Level and Temperature,
Positioners and Liquid Meters
Synchronous Motors with Permanent-Magnet
Technology, HT-direct
D 86.2
PDF: Indicators for panel mounting
MP 12
DC Motors
DA 12
SIREC Recorders and Accessories
MP 20
SIMOREG DC MASTER 6RA70 Digital Chassis
Converters
DA 21.1
SIPART, Controllers and Software
MP 31
SIWAREX Weighing Systems
WT 01
SIMOREG K 6RA22 Analog Chassis Converters
DA 21.2
Continuous Weighing and Process Protection
WT 02
SIMOREG DC MASTER 6RM70 Digital Converter
Cabinet Units
DA 22
Process Analytical Instruments
PA 01
PA 11
SIMOVERT PM Modular Converter Systems
DA 45
PDF: Process Analytics,
Components for the System Integration
SIEMOSYN Motors
DA 48
MICROMASTER 410/420/430/440 Inverters
DA 51.2
MICROMASTER 411/COMBIMASTER 411
DA 51.3
SIMOVERT MASTERDRIVES Vector Control
DA 65.10
SIMOVERT MASTERDRIVES Motion Control
FI 01
SIMATIC Industrial Automation Systems
SIMATIC PCS Process Control System
ST 45
ST 70
DA 65.11
Products for Totally Integrated Automation and
Micro Automation
Synchronous and asynchronous servomotors for
SIMOVERT MASTERDRIVES
DA 65.3
SIMATIC PCS 7 Process Control System
ST PCS 7
ST PCS 7.1
SIMODRIVE 611 universal and POSMO
DA 65.4
Add-ons for the SIMATIC PCS 7
Process Control System
Migration solutions with the SIMATIC PCS 7
Process Control System
ST PCS 7.2
pc-based Automation
ST PC
SIMATIC Control Systems
ST DA
SIMATIC Sensors
Sensors for Factory Automation
FS 10
Systems Engineering
Power supplies SITOP power
KT 10.1
System cabling SIMATIC TOP connect
KT 10.2
Low-Voltage Three-Phase-Motors
IEC Squirrel-Cage Motors
D 81.1
Automation Systems for Machine Tools SIMODRIVE
NC 60
• Main Spindle/Feed Motors
• Converter Systems SIMODRIVE 611/POSMO
Automation Systems for Machine Tools SINAMICS
NC 61
• Main Spindle/Feed Motors
• Drive System SINAMICS S120
Drive and Control Components for Hoisting Equipment
HE 1
Electrical Installation Technology
PDF: ALPHA Small Distribution Boards and
Distribution Boards, Terminal Blocks
ET A1
PDF: ALPHA 8HP Molded-Plastic Distribution System
ET A3
PDF: BETA Low-Voltage Circuit Protection
ET B1
PDF: DELTA Switches and Socket Outlets
ET D1
GAMMA Building Controls
ET G1
Human Machine Interface Systems SIMATIC HMI
ST 80
System Solutions
Applications and Products for Industry are part of the
interactive catalog CA 01
TELEPERM M Process Control System
PDF: AS 488/TM automation systems
PLT 112
PDF: These catalogs are only available as pdf files.
A&D/3U/En 21.08.07
www.siemens.com/micromaster
Siemens AG
Automation and Drives
Standard Drives
Postfach 31 80
91050 ERLANGEN
Germany
w w w. s i e m e n s . c o m / a u to m a t i o n
The information provided in this catalog contains descriptions or
characteristics of performance which in case of actual use do not always
apply as described or which may change as a result of further development
of the products. An obligation to provide the respective characteristics shall
only exist if expressly agreed in the terms of contract. Availability and
technical specifications are subject to change without notice.
All product designations may be trademarks or product names of
Siemens AG or supplier companies whose use by third parties for their own
purposes could violate the rights of the owners.
Order No. E86060-K5151-A121-A6-7600
Subject to change without notice | Dispo 18404 | KG 1007 30.0 E 116 En / 722348 | Printed in Germany | © Siemens AG 2007
© Siemens AG 2007
Similar pages