Data Sheet

®
Electrocomponents
Series 226H Data Sheet
Tactile Switch
3.9x2.9mm Compact
Tactile Switch
Features
Optimized Mechanical Features
• Surface mount J bend terminal configurations
• Compatible with IR reflow and manual soldering
• Variety of operating force & actuator height options
Optimized Contact System
• Excellent tactile feedback
Materials
• Silver coated terminals for better solderability
• High temperature materials (UL94V-0)
• RoHS compliant
Electrical and Mechanical Specifications
Switch Contact Resistance
100 milliohms maximum
Storage Temperature
- 40°C to +85°C
Insulation Resistance
100 Megohms minimum between
insulated terminals
Actuator Strength
3 Kgf. maximum
Maximum Rating
50 mA -12 VDC
Actuation Life
160 gf: 200,000 cycles
250 gf: 100,000 cycles
Dielectric Strength
100 VAC for 1 minute between adjacent
terminals
Operating Force
160 or 250 gf
Travel
0.2mm
Allowable Solder Time
IR Reflow: Up to 5 seconds at 260°C
Manual soldering: Up to 3 seconds at 350°C
Packaging
Standard: Tape and reel packaging with
330mm diameter reel and 16mm wide plastic tape
Operating Temperature
- 40°C to +85°C
1-3
CTS Electrocomponents
© 2015 CTS Corporation. All rights reserved. Information subject to change.
11/6/15
www.ctscorp.com
CTS SERIES 226HJ1VA/B...(B) - Surface Mount J Bend Type 1, With Medium/Long Actuator
4.4
4.3 ±0.1
3.9
2.0 ±0.1
2.3 ±0.1
3.8 ±0.1
2
1
3.8 ±0.1
1.4 ±0.1
2
1.4±0.1
2.3 ±0.1
1.8 ±0.1
1
2
2.9
1.0
1
CIRCUIT DIAGRAM
+0.1
2- 0.8 -0
HOLES
2.0
3.2 ±0.1
PCB LAYOUT
0.5
1.5
0.5
“L”
5.1±0.1
PCB MOUNTING SURFACE
0.6
DIMENSION : mm
STANDARD TOLERANCE :
.X (1 PLACE) : ±0.20
OPTIONAL BOSS
1.8
OPTIONAL BOSS
CTS SERIES 226HJ1VC...(B) - Surface Mount J Bend Type 1, With Flush Actuator
4.3 ±0.1
4.4
2.0 ±0.1
2- 0.75 HOLES
3.9
1.8 ±0.1
1
2
2.9
1.0
1
2
2
1
1.0
2.0
3.2 ±0.1
CIRCUIT DIAGRAM
SR0.6
“L”
PCB LAYOUT
0.5
1.5
0.5
0.3
5.1 ±0.1
2- 0.6
PCB MOUNTING SURFACE
DIMENSION : mm
STANDARD TOLERANCE :
.X (1 PLACE) : ±0.20
OPTIONAL BOSS
1.8
OPTIONAL BOSS
CTS SERIES 226HJ2VA/B...(B) - Surface Mount J Bend Type 2, With Medium/Long Actuator
4.4
3.9
2
CIRCUIT DIAGRAM
1
2
1.8 ±0.1
1
2
1.7 ±0.1
1
2.9
1.4
2- 0.8 +0.1
-0 HOLES
3.2 ±0.1
5.1±0.1
“L”
1.5
PCB LAYOUT
0.5
0.5
2.0
PCB MOUNTING SURFACE
0.6
1.8
OPTIONAL BOSS
OPTIONAL BOSS
2-3
CTS Electrocomponents
© 2015 CTS Corporation. All rights reserved. Information subject to change.
DIMENSION : mm
STANDARD TOLERANCE :
.X (1 PLACE) : ±0.20
11/6/15
www.ctscorp.com
CTS SERIES 226HJ2VC...(B) - Surface Mount J Bend Type 2, With Flush Actuator
4.4
3.9
1
2
2
1
1.8 ±0.1
1
1.7 ±0.1
2.9
1.4
2- 0.75 HOLES
2
2.0
3.2 ±0.1
1.0
5.1±0.1
CIRCUIT DIAGRAM
SR0.6
“L”
1.5
0.3
PCB LAYOUT
0.5
DIMENSION : mm
STANDARD TOLERANCE :
.X (1 PLACE) : ±0.20
PCB MOUNTING SURFACE
2- 0.6
OPTIONAL BOSS
1.8
OPTIONAL BOSS
Ordering Information
226H – J1 V
Termination
J1: SURFACE MOUNT J BEND TYPE 1
J 2: SURFACE MOUNT J BEND TYPE 2
Actuating Direction
V: VERTICAL
A
A
R
Actuator Force
A: 160 gf
B: 250 gf
B
Boss
B: WITH BOSS
BLANK: NO BOSS
Packaging
R : TAPE & REEL PACKAGING
Actuator Length “L”
A: 2.0 mm
B: 2.5 mm
C: 1.5 mm (FLUSH)
!!!Note:
Consult CTS for other common features not
listed.
3-3
CTS Electrocomponents
© 2015 CTS Corporation. All rights reserved. Information subject to change.
11/6/15
www.ctscorp.com
Similar pages