12,15 Ansaughaube 8,95 Verpackt im Gurt nach DIN IEC 60286-3 4,6 Tape on Reel Packaging according to DIN IEC 60286-3 Verpackungseinheit: 220 Stück Packaging unit: 220 pcs 15,3 13,8 15,95 2,75 1,5 hood 5,85 330 Abspulrichtung - Reel off Direction 0,6 0,8 0,65 0,5 11 16 a1 3,675 ohne Ansaughaube 12,15 32 without hood 2 a5 Leiterplatten-Layout Vorschlag / PCB-layout proposal 0,85 a1 Anforderungsstufe 1 Performance Level 1 11 ±0,03 Kontaktbereich vergoldet 3x3=9 Mating Area gold plating 0,8 0,65 3 1) 4x2=8 0,9 ±0,03 Anschlussbereich verzinnt 4-6 µm 1) 0,7 ±0,03 Terminal Area 4-6 µm tin plating 0,8 0,85 2 1,5 4x2=8 1) Durchmesser des Bohrers / drill tool Coplanarity Area of Termination ≤ 0,1 mm Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 2,6 4,45 0,75 Koplanarität der Anschlüsse ≤ 0,1 mm Tolerances Information: Scale 5:1 All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Messerleiste SMD, Powerm. 10mm Male Con. SMD, Powerm. 10mm 214552 www.ERNI.com l 07.02.2014 Index Date Class MSPEED I A3