1208171 Si100x PCN

Process Change Notice #1208171
____________________________________________________________________________________________________
User Registration
Register today to create your account on Silabs.com. Your personalized profile allows you to receive technical document
updates, new product announcements, “how-to” and design documents, product change notices (PCN) and other valuable content
available only to registered users. http://www.silabs.com/profile
PCN Date: 8/17/2012
Effective Date: 11/22/2012
Title: Si100x Revision E
Originator: Greg Fyke
Phone: 512.464.9296
Dept: Product Marketing
Customer Contact: Kathy Haggar
Phone: 512.532.5261
Dept: Sales
PCN Type:
Datasheet
Foundry
Packing
Product Revision
Assembly
Labeling
Discontinuance
Test
Other
Last Order Date: 11/22/2012
PCN Details
Description of Change:
Silicon Labs is pleased to announce revision E of Si100x devices and version 1.1 of the corresponding
datasheet for these products.
Si100x Revision E devices are assembled in LGA-42 packages and are not available in QFN-42
packages used on Revision C. The LGA-42 package does not change the pin ordering or orientation
of Si100x, but requires a change to the PCB landing pattern and soldering stencil.
Please work with your local Sales Representative on a transition plan from Si100x Revision C to
Si100x Revision E. A list of Sales Representatives is available at www.silabs.com
Reason for Change:
Revision E of the Si100x allows customers to exceed the maximum VBAT ramp time, if desired,
during external reset on the device. The LGA-42 package improves PCB solderability of the device.
The datasheet includes updates to Table 4.4 Reset Electrical Characteristics for additional
clarification on VBAT ramp time under different operating modes along with other minor edits.
Impact on Form, Fit, Function, Quality, Reliability:
There is no change to fit, quality or reliability of these devices. The change to form is limited to
the change in package to LGA-42 from QFN-42. The functional change is optional as described
above.
W7206F1 Process Change Notice Form rev AD
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 1
Process Change Notice #1208171
____________________________________________________________________________________________________
Product Identification:
The following orderable part numbers are affected:
Current P/N
New P/N
Si1000-C-GM
Si1001-C-GM
Si1002-C-GM
Si1003-C-GM
Si1004-C-GM
Si1005-C-GM
Si1000-CSA2-GM
Si1002-CSB2-GM
Si1000-E-GM
Si1001-E-GM
Si1002-E-GM
Si1003-E-GM
Si1004-E-GM
Si1005-E-GM
Si1000-ESA2-GM
Si1002-ESB2-GM
Note: Affected part numbers also include custom part numbers and tape and reel variants of the
base part numbers above. Tape and reel variants are denoted with an “R” at the end of the
orderable part number.
Last Date of Unchanged Product: 11/22/2012
Qualification Samples:
Available upon request. Please contact your local Silicon Laboratories sales representative to order
samples. A list of Silicon Laboratories sales representatives may be found at www.silabs.com
Customer Early Acceptance Sign Off:
Customers may approve early PCN acceptance by completing the information below:
Early Acceptance:
Date:
Name:
Company:
Email your early Acceptance approval to: [email protected]
Qualification Data:
Please see attached Qualification Report below.
Embed File(s):
W7206F1 Process Change Notice Form rev AD
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 2
Process Change Notice #1208171
____________________________________________________________________________________________________
Qualification Report
W7206F1 Process Change Notice Form rev AD
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 3
Process Change Notice #1208171
____________________________________________________________________________________________________
Qualification Report, continued
W7206F1 Process Change Notice Form rev AD
The information contained in this document is PROPRIETARY to Silicon Laboratories, Inc. and shall not be reproduced or used in
part or whole without Silicon Laboratories’ written consent. The document is uncontrolled if printed or electronically saved. Pg 4
Similar pages