0 Customer Part No: Part No : 3535BP VZBP35AV27CH01Z4 VZBP35AG77DHZ1Z4 VZBP35AB17BHZ1Z4 VZBP35AB17CHZ1Z4 VZBP35AB47CHZ1Z4 VZBP35AY27BH01Z4 Specification: Documents No: Prepared By: Alex Hsieh / Time: 2013/05/17 Checked By: Kiwi Liao / Time: 2013/05/17 0000000000000000000000000000000000000000000000000000000 Customer Confirmation: Features § § § § § Thermal resistance: 12℃/W Wide viewing angle:120° Operating Temperature -40~85℃ Storage temperature -40~100℃ ROHS-compliant Catalog 00000000000000 0 0 Electrical-Optical Characteristics………………………………….…. 0 Optical Characteristics ……………………………………………….… 2-5 6-9 10 11 12 13-14 15-16 Outline Dimensions …………………………………………………… Reflow Profile ………………………………………………………….. Test items and results of reliability…………………………………… Packing ……………………………….…………………………………… Test circuit and handling precautions ………………………………. 0 0 0 Electrical-Optical Characteristics（Ta=25℃） Part Number Matrix Color Emitter Red VZBP35AV27CH01Z4 Yellow VZBP35AY27BH01Z4 Blue VZBP35AB17BHZ1Z4 Blue VZBP35AB17CHZ1Z4 Blue VZBP35AB47CHZ1Z4 Green VZBP35AG77DHZ1Z4 Absolute Maximum Ratings（Ta=25℃） Iem Symbol Value Unit DC Forward Current IF 350 mA Reverse Voltage VR 5 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Dice temperature Tj 120 ℃ Soldering Temperature Tsol for / 5sec ℃ 0000000000000000000000000000000000000000000000000000000 Please refer to IF-Ta curve for the temperature during application VZBP35AV27CH01Z4 Color Symbol Φv 00000000000000 Red λd 0 Vf 0 0 Forward current Value Unit Test condition Min. Typ. Max. 40 --- 60 Lm If=350mA 620 625 630 nm If=350mA 1.8 2.2 2.8 V If=350mA Unit Test condition ≦500Ma VZBP35AY27BH01Z4 Color Yellow 0 Symbol Value Min. Typ. Max. Φv 45 --- 70 Lm If=350mA λd 584 590 595 nm If=350mA Vf 1.8 2.2 2.8 V If=350mA Forward current ≦500mA 0 0 VZBP35AB17BHZ1Z4 Color Blue Symbol Value Unit Test condition Min. Typ. Max. Φv 12 --- 26 Lm If=350mA λd 460 465 475 nm If=350mA Vf 3.0 3.2 3.8 V If=350mA Unit Test condition Forward current ≦500mA VZBP35AB17CHZ1Z4 Color Blue Symbol Value Min. Typ. Max. Φv 20 --- 30 Lm If=350mA λd 460 465 475 nm If=350mA Vf 3.0 3.2 3.4 V If=350mA Unit Test condition Forward current ≦700mA 0000000000000000000000000000000000000000000000000000000 VZBP35AB47CHZ1Z4 Color Blue Symbol Min. Typ. Max. Φv 20 --- 30 Lm If=350mA λd 450 455 460 nm If=350mA Vf 3.0 3.2 3.4 V If=350mA Unit Test condition Forward current ≦700mA 00000000000000 0 VZBP35AG77DHZ1Z4 0 Color Symbol 0 Green Value Value Min. Typ. Max. Φv 70 --- 110 Lm If=350mA λd 520 525 535 nm If=350mA Vf 3.0 3.2 3.8 V If=350mA Forward current ≦700mA 1. Luminous intensity (Iv) ±10% , Wavelength (nm) ± 2nm , ±0.1V of Forward Voltage 2. IS standard testing 0 0 0 Color Bins Color Blue H Yellow Red Group Min. Wavelength (nm) Max.Wavelength (nm) B 455 460 C 460 465 D 465 470 E 470 475 525 530 525 H 525 530 I 530 535 J 585 590 K 590 595 N 620 625 O 625 630 VF Bins Min. Forward Max. Forward Min. Forward Max. Forward Voltage(v) Group Group 0000000000000000000000000000000000000000000000000000000 Voltage(v) Voltage(v) Voltage(v) A 1.8 2 H 3.2 3.4 B 2 2.2 I 3.4 3.6 C 2.2 2.4 J 3.6 3.8 D 2.4 2.6 E 2.6 2.8 F 2.8 3 G 3 3.2 00000000000000 0 0 0 0 0 0 Luminous Flux Group Group Min. Luminous Max. Luminous Flux (lm) Flux (lm) Group Min. Luminous Max. Luminous Flux (lm) Flux (lm) 12 12 14 24 45 50 13 14 16 25 50 55 14 16 18 26 55 60 15 18 20 27 60 65 16 20 22 28 65 70 17 22 24 29 70 75 18 24 26 30 75 80 19 26 28 31 80 90 20 28 30 32 90 100 21 30 35 33 100 110 22 35 40 23 40 45 0000000000000000000000000000000000000000000000000000000 00000000000000 0 0 0 0 0 0 Optical Characteristics 0000000000000000000000000000000000000000000000000000000 00000000000000 0 0 0 0 0 0 0000000000000000000000000000000000000000000000000000000 00000000000000 0 0 0 0 0 0 0000000000000000000000000000000000000000000000000000000 00000000000000 0 0 0 0 0 0 0000000000000000000000000000000000000000000000000000000 00000000000000 0 0 0 0 0 0 Outline Dimensions and Pad Configuration 0000000000000000000000000000000000000000000000000000000 Circuit Type 3535BP-Red / Yellow 3535BP-Blue / Green Recommended Soldering Pattern 00000000000000 0 0 0 PS.Suggest stencil t =0.12 mm 0 0 0 REFLOW PROFILE IR reflow soldering Profile Lead Free solder 0000000000000000000000000000000000000000000000000000000 NOTES: 1. We recommend the reflow temperature 180℃(±5℃).the maximum soldering temperature should be limited to 190℃. 2. Don’t stress the silicone resin while it is exposed to high temperature. 00000000000000 0 0 0 3. Number of reflow process shall be 1 time. 4. Recommend Solder: 1.TAMURA-TLF-401-11 2. PF602-P 0 0 0 Test items and results of reliability Test Item Test Conditions Duration/ Cycle Number of Damage Reference Temperature Cycle –40℃ 30min ↑↓25℃(5 min) 100℃ 30min 100 cycles 0/22 JEITA ED-4701 300 303 ↑↓5sec 110℃ 30min 100 cycles 0/22 JEITA ED-4701 200 303 Ta=85℃ 1000 hrs 0/22 EIAJED-4701 200 201 1000 hrs 0/22 EIAJED-4701 100 103 1000 hrs 0/22 EIAJED-4701 200 202 1000 hrs 0/22 Tested with Brightek standard 1000 hrs 0/22 Tested with Brightek standard 1000 hrs 0/22 Tested with Brightek standard 3 Times 0/22 MIL-STD-883D –40℃ 30min Thermal Shock High Temperature Storage Humidity Heat Storage Low Temperature Storage Ta=85℃ RH=85% Ta=-40℃ Ta=25℃ 0000000000000000000000000000000000000000000000000000000 Life Test High Humidity Heat Life Test If=500mA 60℃ RH=90% If=500mA Ta=-40℃ Low Temperature Life Test If=500mA ESD(HBM) 1KV at 1.5kΩ;100pf *Criteria for Judging the Damage 00000000000000 Item 0 0 Forward Voltage 0 Reverse Current Luminous Intensity Symbol Condition VF If=350mA IR Iv Criteria for Judgement MIN MAX _ USL*1×1.1 VR=5V _ 100μA If=350mA *2 _ LSL ×0.7 1 [Note]* USL: Upper Specification Level 2 * LSL: Lower Specification Level 0 0 0 Packing Tape and Reel 0000000000000000000000000000000000000000000000000000000 Trailer 160(min) of empty Loaded Pockets Leader 400mm (min) of pockets sealed with tape (500 Lamps) empty pockets sealed with tape 00000000000000 0 0 0 + 0 0 0 0000000000000000000000000000000000000000000000000000000 NOTES: Reeled products (numbers of products are 500pcs) packed in a seal off moisture-proof bag along with a desiccant one by one, five moisture-proof bag of maximums (total maximum number of products are 2,500pcs) packed in an inside box (size: about 240mm x about 195mm x about 100mm) and four inside boxes of maximums are put in the outside box (size: about 410mm x about 255mm x about 240mm) Together with buffer material, and it is packed. (Part No., Lot No., quantity should appear on the label on the moisture-proof bag, part No. And quantity should appear on the insertion request form on the cardboard box.) . 00000000000000 0 0 0 0 0 0 Test circuit and handling precautions Test circuit V LED Handling precautions 1、The following items are recommended when handling LEDs 5.1 The lens of LEDs should not be exposed to dust and debris. Excessive dust and debris may cause a drastic decrease in light output. 0000000000000000000000000000000000000000000000000000000 5.2 Avoid mechanical stress on LED lens 5.3 Do not touch the LED lens surface. It would affect the optical performance of the LED due to the LED lens’ damage 5.4 Pick & place tool was recommended to use for the remove of LEDs from the factory tape & reel packaging 2、Pick & Place Nozzle The pickup tool was recommended and shown as below 00000000000000 0 0 0 Unit : mm Tolerance : ±0.1 0 0 0 3、Lens handling Please follow the guideline to grab LEDs 3.1 Use tweezers to grab LEDs 3.2 Do not touch lens with the tweezers 3.3 Do not touch lens with fingers 3.4 Do not apply more than 4N of lens (400g) directly onto the lens Wrong (X) Correct ( ) 0000000000000000000000000000000000000000000000000000000 4、Lens cleaning In the case where a minimal level of dirt and dust particles can’t be guaranteed, a suitable cleaning solution can be applied to the lens surface 4.1 Try a gentle swabbing using a lint-free swab 4.2 If needed, the use of lint-free swab and isopropyl alcohol used gently removes dirt from the lens surface. 4.3 Do not use other solvents as they may directly react with the LED assembly 00000000000000 4.4 Do not use ultrasonic cleaning that the LED will be damaged 0 0 5、Carrier Tape Handling 0 The following items are recommended when handling the Carrier tape of LEDs 5.1 Do not twist the carrier tape 5.2 The inward bending diameter should not smaller than 6cm for carrier tape. 5.3 Do not bend the tape outward. <6cm 0 0