APTINATM IMAGE SENSOR INTERCONNECT BOARD CYUSB3ACC-001 1. Connect the AptinaTM Image Sensor Interconnect Board (CYUSB3ACC-001) to EZ-USB® FX3TM Development Kit (CYUSB3KIT-001) CYUSB3ACC-001 CYUSB3KIT-001 2. Plug the Aptina Image Sensor Headboard into the interconnect board (CYUSB3ACC-001) CYUSB3KIT-001 CYUSB3ACC-001 Aptina Image Sensor Headboard APTINATM IMAGE SENSOR INTERCONNECT BOARD CYUSB3ACC-001 CYUSB3KIT-001 Aptina Image Sensor Headboard 3. Learn to use FX3 in applications involving image sensors with the application note AN75779 - How to Implement an Image Sensor Interface with EZ-USB FX3 in a USB Video Class (UVC) Framework available at http://www.cypress.com/go/AN75779 For the latest information about this interconnect board and to download the hardware files, visit www.cypress.com/go/CYUSB3ACC-001 For the latest information about EZ-USB FX3 Development Kit CYUSB3KIT-001 and to download Kit Software and Hardware files, visit www.cypress.com/go/CYUSB3KIT-001 © 2014 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. Doc.#: 001-92793 Rev.**