2SA1162 Silicon PNP Epitaxial Type Transistor Features • High voltage and high current: VCEO = -50 V, IC = 150 mA (max) • Low noise: NF = 1dB (typ.), 10dB (max) • Small package • RoHS compliant package Mechanical Data • Case: Molded plastic • Epoxy: UL94-V0 rate flame retardant Packing & Order Information 3,000/Reel Graphic symbol Publication Order Number: [2SA1162] © Bruckewell Technology Corporation Rev. A -2014 2SA1162 Silicon PNP Epitaxial Type Transistor MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS ABSOLUTE MAXIMUM RATING @ Ta=25°C unless otherwise specified Symbol Parameter Value Unit VCBO Collector-Base Voltage -50 V VCEO Collector-Emitter Voltage -50 V VEBO Emitter-Base Voltage -5 V IC Collector Current -150 mA IB Base Current -30 mA PC Collector Dissipation 150 mW Tj Junction Temperature 125 °C Tstg Storage Temperature Range -55 to +125 °C ELECTRICAL CHARACTERISTICS @ Ta=25°C unless otherwise specified Symbol Parameter Test Conditions MIN TYP MAX UNIT ICBO Collector cut-off current VCB = -50 V , IE = 0 -0.1 μA IEBO Emitter cut-off current VEB = -5 V , IC = 0 -0.1 μA hFE DC current gain VCE = -6 V , IC = -2 mA VCE(sat) Collector-emitter saturation voltage IC = -100mA , IB = -10mA -0.1 fT Transition frequency VCE = -10 V , IC = -1 mA 60 Cob Collector output capacitance NF Noise figure VCB = -10 V , IE = 0 f = 1.0MHz VCE = -6 V, IC = -0.1 mA f = 1.0KHz , Rg = 10kΩ 70 400 -0.3 V MHz 4 7 pF 1.0 10 dB *Pulse test: tp≤300μs, δ≤0.02. hFE CLASSIFICATION Marking Rank Range Publication Order Number: [2SA1162] SO O SY Y SR GR 70-140 120~240 200-400 © Bruckewell Technology Corporation Rev. A -2014 2SA1162 Silicon PNP Epitaxial Type Transistor ■Typical Characterisitics Publication Order Number: [2SA1162] © Bruckewell Technology Corporation Rev. A -2014 2SA1162 Silicon PNP Epitaxial Type Transistor Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [2SA1162] © Bruckewell Technology Corporation Rev. A -2014