Freescale Semiconductor, Inc. Industrial Selector Guide Making embedded systems better with robust reliable performance Quarter 3, 2015 SG200 Rev. 8.0 Contents PRODUCT Sub category Page number Battery Management Intelligent Battery Sensors Page 3 Drivers and Switches 12 V and 36 V eXtreme Switches Configurable I/O - Signal Conditioning Valve Control Page 4 Page 5 Page 6 Engine and DC Motor Control High Voltage H-Bridge Drivers and Three Phase FET Pre-driver Low Voltage H-Bridge Motor Drivers Page 6 Page 7 Power Management System Basis Chips (SBC) CAN Bus and LIN Connectivity Transceivers Embedded System Power Management Page 8 Page 9 Transceivers Engine Management Intelligent Distributed Controllers (IDC) Page 10 Page 10 SG200 (Selector Guide) (3Q2015) – 2 Freescale Semiconductor Industrial Products The product categories range from Power Actuation and Communication Transceivers to Signal Conditioning and Embedded MCU + Power. Power Actuation covers a broad range of load control and drivers, including motor control. SMARTMOS—Freescale Semiconductor SMARTMOS technology allows designers to interface high-precision components with the harsh automotive environment. Cost-Effective—Ideally suited for rug automotive applications, SMARTMOS solutions offer a cost-effective blend of analog, digital, and robust power silicon that enables integrated, mixed signal, power control ICs. Functionality—SMARTMOS solutions implement traditional analog functions with smaller die size, and a modular process produces components with the minimum number of process steps for each circuit, minimizing overhead. Benefits—Freescale Semiconductor SMARTMOS technology brings a wide range of benefits to today’s designs, including component reductions, power capability, durability, efficiency, precision, high-performance analog, and robustness. Packaging - Freescale device may be offered in EPP and RoHS compliant packages; view the external web for specifics. For additional information, visit: Documentation, Tool, and Product Libraries www.freescale.com www.freescale.com/analog www.freescale.com/powermanagement www.freescale.com/productlongevity www.freescale.com/files/shared/doc/ prod_num_scheme/ANALOGPN.pdf Battery Management — Intelligent Battery Sensors Product Description Main Characteristics MCU Reference MCU Details Additional Information Packaging Status MM912_637 Integrated Precision Battery Sensor Simultaneous battery voltage and current measurement with 16-bit sigma-delta ADC & IIR filter. Voltage regulators: 2.5 V/10 mA & 60 mA, 5.0 V/80 mA. LIN 2.1 physical Layer with selectable slew rates and triggered wakeup 16-bit MCU (CPU12_V1) S12 16-bit core, 128 KB/96 KB Flash, 6 KB RAM, 4 KB data Flash, ESCI, 16-bit 4 Channel Timer, Internal Clock Generator, BDM Selectable Internal or external temp sense, GPIO, including SPI functionality, internal or external oscillator. Window watchdog with Selectable Timing, Normal/ Stop/Sleep/Crank mode control high voltage wake-up input. 48-pin QFN Exposed Pad Production EVB MM9Z1_638 Battery Sensor with CAN and LIN This is a fully integrated battery monitoring device. The device supports precise current measurement via an external shunt resistor. The MM9Z1_638 includes LIN 2.2 protocol and physical interface, and an MSCAN protocol controller 16-bit MCU S12Z S12Z MCU with 128 KB Flash, 8 KB RAM, 4 KB EEPROM Four battery voltage measurements with internal resistor dividers, and up to five direct voltage measurements for use with an external resistor divider. Measurement synchronization between voltage channels and current channels Five external temperature sensor inputs with internal supply for external sensors Low-power modes with lowcurrent operation. Multiple wake-up sources: LIN, timer, high-voltage input, external CAN interface, and current threshold and integration. Precision internal oscillator and connections for external crystal. 48-pin QFN Exposed Pad Production EVB Ref. Design SG200 (Selector Guide) (3Q2015) – 3 Drivers and Switches — 12 V and 36 V eXtreme Switches Product Description No of Outputs High-side Maximum or LowCurrent side Each Output (A) RDS(on) (m) of Each Output Current Limitation (A) Current Limitation Standby Max (A) Control Status/Fault Reporting Protection Features Packaging Status MC12XSB 12 V Industrial Multipurpose Low RDS(on) eXtreme Switches MC34981 Single High-side Switch (4.0 m), with PWM, Protection and Diagnostics 1 H 40 4 100 5.0 Parallel Status Pin, Overcurrent, Current Overtemperature, Monitor, Short-circuit, Temperature Undervoltage Lock out 16-pin PQFN Production MC34982 Self Protected 2.0 m Switch with Diagnostic and Protection 1 H 60 2 150 10 Parallel, SPI Status Pin, Overcurrent, SPI Overtemperature, reporting, Short-circuit, Current Undervoltage Monitor, Lock out Temperature 16-pin PQFN Production EVB MC34984 Self Protected 4.0 m Switch with Diagnostic and Protection 2 H 30 4 100 10 Parallel, SPI Status Pin, Overcurrent, SPI Overtemperature, reporting, Short-circuit, Current Undervoltage Monitor, Lock out Temperature 16-pin PQFN Production EVB MC34988 Self Protected 8.0 m Switch with Diagnostic and Protection 2 H 15 4 50 10 Parallel, SPI Status Pin, Overcurrent, SPI Overtemperature, reporting, Short-circuit, Current Undervoltage Monitor, Lock out Temperature 16-pin PQFN Production EVB MC12XSC 12V External Industrial Lighting Multichannel eXtreme Switches MC07XSC200 Dual High-side Switch (2 x 7m), with PWM, Protection, Diagnostics and SPI Control 2 H 6.0 2x7 93 5.0 SPI and Parallel SPI Fail-safe mode, 32-pin SOICW Overcurrent Exposed Pad shutdown, Overtemperature, Short-circuit Production MC10XSC425 Quad High-side Switch (2 x 10 m, 2 x 25m), with PWM, Protection, Diagnostics and SPI Control 4 H 6.0 2 x 0, 2 x 25 39, 78 5.0 SPI and Parallel SPI Fail-safe mode, 32-pin SOICW Overcurrent Exposed Pad Shutdown, Overtemperature, Short-circuit Production EVB MC12XSF External Industrial Lighting Multichannel Scalable eXtreme Switches MC07XSF517 Penta High-side Switch (3 x 7 m2 x 17 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver. 5+1 H 11, 5.5 3 x 17 2x7 100, 50 20 SPI Parallel SPI Fail-safe mode, 54-pin SOICW Exposed PAD Overcurrent Shutdown, Overtemperature, Short-circuit Production EVB (6517) MC08XSF421 Quad High-side Switch (2 x 8 m, 2 x 21 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver 4+1 H 11, 5.5 2x8 2 x 21 100, 50 20 SPI Parallel SPI Fail-safe mode, 32-pin SOICW Overcurrent Exposed PAD Shutdown, Overtemperature, Short-circuit Production EVB MC17XSF400 Quad High-side Switch (4 x 17 m), with PWM, Protection, Diagnostics and SPI Control. Also, 1 logic level output driver 4+1 H 5.5 4 x 17 50 20 SPI Parallel SPI Fail-safe mode, 32-pin SOICW Overcurrent Exposed PAD Shutdown, Overtemperature, Short-circuit Production EVB MC17XSF500 Penta High-side Switch (5 x 17 m), with PWM, Protection, Diagnostics and SPI Control. Also, one logic level output driver. 5+1 H 5.5 5 x 17 50 20 SPI Parallel SPI Fail-safe mode, 32-pin SOICW Overcurrent Exposed PAD shutdown, Overtemperature, Short-circuit Production EVB (6500) SG200 (Selector Guide) (3Q2015) – 4 Drivers and Switches — 12 V and 36 V eXtreme Switches (continued) Product Description No of Outputs High-side Maximum or LowCurrent side Each Output (A) RDS(on) (m) of Each Output Current Limitation (A) Current Limitation Standby Max (A) Control Status/Fault Reporting Protection Features Packaging Status MC36XSD 36 V Multipurpose Industrial Low RDS(on) Intelligent eXtreme Switches MC06XSD200 Dual High-side Switch (2 x 6 m), with PWM, Protection, Diagnostics and SPI Control (24 V) 2 H 9.0 2x6 30, 90 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Short-circuit, Parallel operation 23-pin PQFN Production EVB MC10XSD200 Dual High-side Switch (2 x 10 m), with PWM, Protection, Diagnostics and SPI Control (24 V) 2 H 6.0 2 x 10 18, 55 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Short-circuit, Parallel operation 23-pin PQFN Production EVB MC16XSD200 Dual High-side Switch (2 x 16 m), with PWM, Protection, Diagnostics and SPI Control (24 V) 2 H 3.0 2 x 16 9.0, 27 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Short-circuit, Parallel operation 23-pin PQFN Production EVB MC22XSD200 Dual High-side Switch (2 x 22 m), with PWM, Protection, Diagnostics and SPI Control (24 V) 2 H 3.0 2 x 22 9.0, 27 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Short-circuit, Parallel operation 32-pin SOIC Exposed PAD Production EVB MC50XSD200 Dual High-side Switch (2 x 50 m), with PWM, Protection, Diagnostics and SPI Control (24 V) 2 H 1.2 2 x 50 3.5, 11 10 SPI and Parallel SPI Fail-safe mode, Overcurrent shutdown, Overtemperature, Short-circuit, Parallel operation 32-pin SOIC Exposed PAD Production EVB Drivers and Switches — Configurable I/O - Signal Conditioning Product MC34972 Description 22 input Multiple Switch Detect Interface with 16 mA Wetting Current and Suppressed Wake-up Main Characteristics Switch Monitor Voltage (V) Operating Voltage (V) Packaging Status Multiple switch detection interface with suppressed wake-up designed to detect closing and opening of up to 22 switch contacts (14 GND, 8 configurable), wetting current of 2.0 mA or 16 mA. -14 to 38 5.5 to 26 32-pin SOICW Exposed Pad Production EVB -14 to 40 MC34975 22 input Multiple Switch Detect Interface with 32 mA Wetting Current and Wake- 22 inputs contact monitoring (14 GND, 8 up configurable), 4.0 mA or 32 mA pulse wetting current, low-power mode interrupt capability, wake-up. Can supply current to external sensors. -14 to 38/40 5.5 to 28 32-pin SOICW Exposed Pad Production EVB MC34978 22 input Multiple Switch Detect Interface with programmable Wetting Current Multiple switch detection interface designed to detect closing and opening of up to 22 switch contacts (14 GND, 8 configurable), programmable wetting current from 2.0 to 20 mA. 24 to 1 Analog Multiplexer. -14 to 38 V 4.5 to 36 32-pin SOICW Exposed Pad Production EVB CD1030 33 Channel Multiple Switch Detection Interface with Programmable Wetting Current Multiple switch detection interface designed to detect closing and opening of up to 33 switch contacts (21 GND, 11 configurable), programmable wetting current from 2.0 to 20 mA, 35 to 1 Analog Multiplexer -14 to 38 V 4.5 to 36 48-pin LQFP-EP 1Q 2016 EVB Planned SG200 (Selector Guide) (3Q2015) – 5 Drivers and Switches — Valve Control Product Description Main Characteristics Load Supply Voltage (V) Min. Max. Other Features Interface and Input Control Protection Features Packaging Status SB0410 Fully Integrated Quad Valve Controller System on Chip 36 V Integrates high precision, x4 valve drivers current regulated or x4 PWM valve drivers, DC motor pump predriver (16KHz), x2 lowside drivers, ADC 10-bit safety state machine 6.0 36 Current regulated valve drivers up to 2.25 A, up to 5.0 KHz, PWM valve drivers up to 5.0 A, up to 5.0 KHz, Easy current control, x3 input A/D SPI Overcurrent, Open Load, Overtemperature, VDS monitoring, Overvoltage, Undervoltage, Clock Failure, Watchdog 48-pin LQFPEP Production EVB SB0800 Fully Integrated Octal Valve Controller System on Chip 36 V Integrates fail-safe switch, high precision, x4 valve drivers current regulated, x4 PWM valve drivers, DC motor pump predriver, low-side driver and high-side driver for general purpose, ADC 10-bit safety state machine 6.0 36 Current regulated valve drivers up to 2.25 A, up to 5.0 KHz, PWM valve drivers up to 5.0 A, up to 5 Khz, Easy current control, x3 input A/D SPI Overcurrent, Open Load, Overtemperature, VDS monitoring, Overvoltage, Undervoltage, Clock Failure, Watchdog 64-pin LQFPEP Production EVB Engine and DC Motor Control — High Voltage H-bridge Drivers and Three Phase FET Pre-driver Product Description Main Characteristics No of Outputs RDS(on) (m) of Each Output Peak Current Limitation (A) Current Limitation Standby Max Control Status Reporting Protection Features Packaging Status MC34931 5.0 A H-Bridge Brushed DC Motor Driver, Single, Automatic thermal back-off; 5.0 - 28 V, 5.0 A, SOICW-EP 32 ld Real-time current output Feedback; Low leakage current 2 120 8.0 50 A Parallel Status Flag Output Short32-pin SOICW circuit Protect, with Exposed Overcurrent Pad Limit, Overtemperature Production EVB MC34932 5.0 A Dual H-Bridge Brushed DC/Stepper Motor Driver, 5.0 - 28 V, 5.0 A, SOICW-EP 54 ld Automatic thermal back-off; Real-time current output Feedback; Low leakage current 4 120 8.0 50 A Parallel Status Flag Output Short54-pin SOICW circuit Protect, with Exposed Overcurrent Pad Limit, Overtemperature Production EVB GD3000 Three Phase Field Effect Transistor Pre-driver Triple high-side and low-side FET predrivers, with parallel & SPI control and programmable deadtime (shoot-through protect) 6 6000 high-side 5000 low-side 2.0 56 A Parallel SPI Programmable Deadtime, Reverse Charge Injection Production EVB Planned SG200 (Selector Guide) (3Q2015) – 6 56-pin QFN Engine and DC Motor Control — Low Voltage H-Bridge Motor Drivers Product Description Main Characteristics Operating Voltage (V) Control Output Drives High/Low-side, Drive Current Status Reporting Protection Features Packaging Status Shoot Through Protect, Undervoltage Detect, Thermal detection 16-pin UQFN Production FRDM EVB Programmable 54-pin SOICW Deadtime, Exposed Pad Reverse Charge Injection Protect Production EVB MC34933 Dual H-Bridge Motor Driver, 7.0 V, 1.4 A Peak, 200 kHZ PWM, for Stepper Motor or two HBridges Monolithic dual H-Bridge driver IC in ultrasmall 3X3 mm UQFN package, integrated charge pump and protection 2.7 to 7.0 Parallel 1.4 A Shutdown MC34937 Three-Phase Field Effect Transistor Pre-driver Triple high-side and low-side FET predrivers with parallel and SPI control and programmable shoot-through protect 8.0 to 58 Parallel, SPI 3 H, 3 L, 1.0 A (typ.) SPI MPC17C724 Dual H-Bridge Motor Driver, 5.5 V, 0.8 A Peak, 200 kHZ PWM, for Stepper Motor or two HBridges Monolithic dual H-Bridge driver IC in ultrasmall 3X3 mm QFN package and 1 uA sleep mode 2.7 to 5.5 Parallel 0.8 A Shutdown Shoot Through Protect, Undervoltage Detect 16-pin QFN Production FRDM EVB MPC17510 H-Bridge Motor Driver, 15 V, 3.8 A Peak, 200 kHZ Monolithic H-Bridge driver IC with PWM, with integrated MOSFET driver integrated charge pump and protection. Includes unique MOSFET gate drive option. 2.0 to 15 Parallel 3.8 A Shutdown Shoot Through Undervoltage Detect 24-pin TSSOP Production FRDM EVB MPC17529 Dual H-Bridge Motor Driver, 6.8 V, 1.4 A Peak, 200 kHZ PWM, for Stepper Motor or two HBridges Monolithic dual H-Bridge driver IC with integrated charge pump and protection 2.0 to 6.8 Parallel 1.4 A Shutdown Shoot Through Protect, Undervoltage Detect 20-pin VMFP Production FRDM EVB MPC17533 Dual H-Bridge Motor Driver, 6.8 V, 1.4 A Peak, 200 kHZ PWM, for Stepper Motor or two HBridges Monolithic dual H-Bridge driver IC with integrated charge pump and protection, 2 uA sleep mode 2.0 to 6.8 Parallel 1.4 A Shutdown Shoot Through Protect, Undervoltage Detect 16-pin VMFP Production FRDM EVB MPC17511 H-Bridge Motor Driver, 6.8V, 3.0 A Peak, 200 kHZ Monolithic H-Bridge driver IC with PWM, with integrated MOSFET driver integrated charge pump and protection. Includes unique MOSFET gate drive option 2.7 to 5.7 Parallel 3.0 A Shutdown Shoot Through Protect, Undervoltage Detect 24-pin QFN 16-pin VMFP Production FRDM EVB MPC17531 Dual H-Bridge Motor Driver, 6.8V, 1.4 A Peak, 200 Monolithic dual H-Bridge driver IC with kHZ PWM, for Stepper Motor or two H-Bridges integrated charge pump and protection 2.0 to 6.8 Parallel 1.4 A Shutdown Shoot Through Protect, Undervoltage Detect 16-pin VMFP Production FRDM EVB SG200 (Selector Guide) (3Q2015) – 7 Power Management — System Basis Chips (SBC) CAN Bus and LIN Connectivity Transceivers Product Description Main Characteristics Bus Type and Standard Operating Voltage (V) Current Limitation Standby (A) Typ. Max. Other Features Control and Status Reporting Protection Features Packaging CM0902 Dual High-Speed CAN Transceiver The CM0902 is a dual high-speed CAN Dual CAN HS transceiver device, providing the physical dual wire interface between the CAN protocol controller of an MCU and the physical dual wire CAN bus. Both channels are completely independent, featuring CAN bus wake-up on each CAN interface, and TXD dominant timeout functionality 4.5 to 5.5 - 15 CAN bus wake-up, 3.3 or 5.0 V MCU I/O, TXD dominant timeout Parallel CM3010 IO-Link Device CM3010 includes one fully-featured IOLink channel and one switching output channel. It integrates an advanced power management block consisting of a DC-DC buck pre-regulator followed by an LDO. IO-Link 9.0 to 30 - 500 Additional switching output, DC-DC buck converter, On-chip RC oscillator, integrated frame handler SPI Overvoltage protection, Highcurrent protection, Hightemperature detection 24 QFN 2Q 2016 EVB Planned CM3120 IO-Link Master CM3120 includes two fully-featured IOLink channels which can work in three different operation modes. Circuit integrates an IO-Link frame handler fully compliant with the IO-Link v1.1 specification and which implements most of the IO-Link communication tasks. IO-Link 8.0 to 32 - - Three different operation modes, Master/Device operation, integrated frame handler SPI Overcurrent protection for the IO link channels Over temperature monitoring and protection Overvoltage protection 48 QFN 4Q 2015 EVB Planned MC34901 High-Speed CAN Transceiver Single CAN high-speed physical layer provides the physical interface between an MCU and the physical dual wires of the CAN bus. The MC34901 supports longlength CAN node interconnects for industrial applications. CAN HS dual wire 4.5 to 5.5 - 5.0 CAN bus wake-up, 3.3 or 5.0 V MCU I/O Parallel High system ESD spec. 8-pin SOICN Production EVB MC34903 System Basis Chip (SBC)-Gen 2-with High Speed CAN & LIN Interfaces High-speed CAN and one LIN physical interface. 5.0 or 3.3 V VDD regulator. LIN single wire 5.5 to 27 15 35 Config. I/O, “Secured” Overcurrent, 32-pin MUX-out, pin SPI Overtemperature, SOICW compatible Short-circuit, Exposed Pad with MC34905. Undervoltage detect Production EVB MC34904 System Basis Chip (SBC)-Gen 2-with High Speed CAN Interface High-speed CAN physical interface. 5.0 or 3.3 VDD and VAUX regulators with current sharing. CAN highspeed, dual wires 5.5 to 27 15 35 Config. I/O, “Secured” Overcurrent, 32-pin MUX - out, pin SPI Overtemperature, SOICW compatible Short-circuit, Exposed Pad with MC34905. Under-voltage detect Production EVB (‘905) MC34905 System Basis Chip (SBC)-Gen 2-with High Speed CAN & LIN Interfaces High-speed CAN and one LIN physical interfaces. 5.0 or 3.3 VDD and VAUX regulators with current sharing. CAN highspeed, dual wires. LIN single wire 5.5 to 27 15 35 Config. I/O, MUX-out, SAFE output, Low-power modes with INT and RST capability. “Secured” Overcurrent, 32-pin SPI Overtemperature, SOICW Short-circuit, Exposed Pad, Undervoltage detect Production EVB FS6407 Safe System Basis Chip with Buck and Boost DC/DC up to 800 mA Multiple switching and linear voltage regulators, built-in enhanced high speed CAN interface fulfills the ISO11898-2 and 5 standards. CAN highspeed, dual wires. 5.6 to 40 32 60 Safe Assure product “Secured” Overcurrent, 48-pin LQFP SPI Overtemperature, Exposed Pad Over & Undervoltage detect 4Q 2015 EVB SG200 (Selector Guide) (3Q2015) – 8 High system ESD 14-pin SOICN spec. Status Production EVB Power Management — System Basis Chips (SBC) CAN Bus and LIN Connectivity Transceivers (continued) Product Description Main Characteristics Bus Type and Standard Operating Voltage (V) Current Limitation Standby (A) Typ. Max. Other Features Control and Status Reporting Protection Features Packaging FS6408 Safe System Basis Chip with Buck and Boost DC/DC up to 1.5 A Multiple switching and linear voltage regulators, built-in enhanced high speed CAN interface fulfills the ISO11898-2 and 5 standards. CAN highspeed, dual wires. 5.6 to 40 32 60 Safe Assure product “Secured” Overcurrent, 48-pin LQFP SPI Overtemperature, Exposed Pad Over & Undervoltage detect FS4409 System Basis Chip with DC-DC and Multiple Switch-to-Ground Interface Buck/Boost DC/DC and linear voltage regulators. Single enhanced high speed CAN interface fulfills the ISO11898-2 and -5 standards) plus four LIN's compatible with specification 2.1 and SAEJ2602-2. Also contains 6 switch to ground inputs. CAN highspeed, dual wires. LIN single wire 2.5 to 35 100 200 Multiple “Secured” Overcurrent, 48-pin LQFP source wakeSPI Overtemperature, Exposed Pad up, 3.3 or 5.0V Short-circuit, MCU supply, Undervoltage Watchdog detect timer, Switched inputs, MUX output SAFE output Status 4Q 2015 EVB Production EVB (33909) Power Management — Embedded System Power Management Product Description Main Characteristics MCU Support Operating Voltage (V) Protection Features Additional Features Packaging Status VR500 Power Management Integrated Circuit for QorlQ Quad buck regulator with up to 4.5 A output LS1 networking communications processors and five user-programmable LDOs QorlQ LS1 series 2.8 to 4.5 Thermal protection, Undervoltage detection, V-Regs current limits I2C bus, 4 Bucks, 5 LDOs, VREFDDR and VTT features for DDR Memory support 56-pin WFQFN Exposed pad Production EVB MMPF0100 Power Management Integrated Circuit for i.MX6 Highly integrated, fully programmable PMIC Series with 4/ 6 buck regulators, 5.0 V boost regulator, 6 general purpose LDOs, 1 VSNVS LDO/switch and DDR Reference i.MX 6 series 3.0 to 4.5 Thermal protection, Undervoltage detection, V-Regs. current limits Coincell charger, OTP memory, I2C bus, 6 Buck, 1 Boost and 6 LDO VRegs. 56-pin QFN, (8 x 8 x 0.85 mm) Exposed pad (2 Types) Production EVB PRGM MMPF0200 12 Channel Configurable Power Management Integrated Circuit Highly integrated, fully programmable PMIC with 3/ 4 buck regulators, 5.0 V boost regulator, 6 general purpose LDOs, 1 VSNVS LDO/switch and DDR Reference i.MX 6 series 2.8 to 4.5 Thermal protection, Undervoltage detection, V-Regs. current limits Coincell charger, OTP memory, I2C bus, 4 Buck, 1 Boost and 6 LDO VRegs. 56-pin QFN, (8 x 8 x 0.85 mm) Exposed pad Production EVB PRGM PF3000 Power Management Integrated Circuit for i.MX6 Highly integrated, fully programmable PMIC and i.MX7 Families with 3/4 buck regulators, 5.0V boost regulator, 6 LDOs, 1 VSNVS LDO/switch and DDR reference i.MX6 series and i.MX7 series 2.8 to 4.5 or 3.7 to 5.5 Thermal protection, undervoltage detection, V-Regs. current limits Coincell charger, OTP memory, I2C bus, 4 Buck, 1 Boost and 6 LDO VRegs. 48-pin QFN, (7 x7 x 0.85 mm) Exposed pad Production FRDM EVB PRGM PF3001 Power Management Integrated Circuit for i.MX6 Highly integrated, fully programmable PMIC and i.MX7 Families in “always ON” applications with 3 buck regulators, 6 LDOs and 1 VSNVS LDO/switch i.MX6 series and i.MX7 series 2.8 V to 4.5 V or 3.7 V to 5.5 V Thermal protection, undervoltage detection, V-Regs. current limits Coincell charger, I2C bus, 3 Buck, and 6 LDO V-Regs. 48-pin QFN, (7 x7 x 0.85 mm) Exposed pad Production FRDM EVB PRGM SG200 (Selector Guide) (3Q2015) – 9 Transceivers — Engine Management Product Description Main Characteristics Peak Current Limit (A) RDS(on) (m) Control Operating Voltage (V) Packaging Status MC33812 Single-cylinder Engine Control Integrated Circuit Engine control power IC, with three low-side drivers, one pre-driver, +5.0 V pre-regulator, ISO 9141 physical interface and MCU watchdog circuit. 2 @ 6.0 1 @ 2.0 2 @ 200 1 @ 1000 Parallel 4.5 to 36 32-pin SOICW Exposed Pad Production EVB Ref. Design MC33813 One-cylinder Small Engine Control IC Engine control analog power IC intended for one cylinder motorcycle and other small engine control applications. Includes ISO 9141 communication interface. 1 @ 3.0 1 @ 6.0 2 @ 2.4 1 @ .110 1 @ 400 1 @ 300 2 @ 1500 1 @ 20000 SPI, Parallel 6.0 to 18 48-pin LQFP, Exposed Pad Production EVB MC33814 Two-cylinder Small Engine Control IC Engine control analog power IC intended for two cylinder motorcycle and other small engine control applications. Includes ISO 9141 communication interface. 2 @ 3.0 1 @ 6.0 2 @ 2.4 1 @ .110 2 @ 400 1 @ 300 2 @ 1500 1 @ 20000 SPI, Parallel 6.0 to 18 48-pin LQFP, Exposed Pad Production EVB Transceivers — Intelligent Distributed Controllers (IDC) Product Description MM912_634 Integrated S12 MagniV Based Relay Drivers with LIN MM912_P812 MM912_S812 Main Characteristics Cascaded dual Voltage Regulator 2.5 V/50 mA and 5.0 V/80 mA, LIN Physical Layer with Selectable Slew rates, Window Watchdog with Selectable Dual high-side and Dual Low-side Switches with Embedded S12 MCU + Power + LIN MCU Reference MCU Detail Additional Information Packaging Status 16-bit MCU S12 16-bit Core, 32 k Flash, 2.0 kB RAM, ESCI, Multi channel 10-bit ADC, 16-bit 4 Channel Timer, Internal Clock Generator High voltage wake-up Inputs, Selectable gain, I-sense, Battery Voltage Sense. Timing, Normal/Stop/ Sleep mode control, Hall Supply of 18 V/30 mA 48-pin LQFP Exposed Pad Production S12P MCU and Multifunctional Ignition and Injector Driver An engine control IC combining an MCU (S12P) and System In Package (SiP) analog control die (MC33812) intended for motorcycle and other single/dual cylinder small engine control applications. 16-bit MCU S12P The MCU S12P has 6 KB RAM, and flash memory size of 96 KB or 128 KB. The S12P family uses error correction code (ECC) on flash memory, a separate data-flash module for diagnostic or data storage, a fast analog-to-digital converter (ATD), and a frequency modulated PLL. Analog functions consists of three integrated low-side drivers, one predriver, a +5.0 V, voltage pre-regulator, an MCU watchdog circuit, an ISO 9141 K-Line interface, and a parallel interface for MCU communication. 100 lead LQFP, Exposed Pad Production Ref. Design S12XS MCU and Multifunctional Ignition and Injector Driver System In Package (SiP) 16-bit MCU S12XS The MCU S12XS has 8 KB or 12 KB RAM, and flash memory size of 128 KB or 256 KB. The S12XS family uses many of the same features found on the S12P family, including error correction code (ECC) on flash memory, a separate data-flash module for diagnostic or data storage, a fast analog-to-digital converter (ATD), and a frequency modulated PLL. Analog functions consists of three integrated low-side drivers, one predriver, a +5.0 V, voltage pre-regulator, an MCU watchdog circuit, an ISO 9141 K-Line interface, and a parallel interface for MCU communication. 100 lead LQFP, Exposed Pad Production Ref. Design An engine control IC combining an MCU (S12XS) and analog control die (MC33812) intended for motorcycle and other single/dual cylinder small engine control applications. SG200 (Selector Guide) (3Q2015) – 10 Product Numbering — Analog Auto and Power Management Devices MC mm FF r xxxx v PP RR FAMILY/ROADMAP PRODUCT CATEGORY MC - Qualified Standard SC - Custom Device PC - Prototype Device MARKET 32 - Consumer 33 - Automotive 34 - Industrial 35 - Medical/Military AR - Alternator Regulators BC - Battery Chargers BM - Battery Management CD - Configurable Detection CM - Communication FS - System Basis Chips GD - Gate Drivers HB - H-Bridge MM - Millimeter wave MR - MMIC Radar PF - Power Fusion SA - Safety Airbag SB - Safety Braking SD - Smoke Detection VR - Voltage Regulator XS - eXtreme switch PACKAGING DESIGNATOR SILICON REVISION (default blank) CORE 0000 (Defined by BU) Legacy product numbering is available in ANALOGPN on www.freescale.com SG200 (Selector Guide) (3Q2015) – 11 VARIATION (default blank) TAPE AND REEL INDICATOR How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support For current information, please visit freescale.com/analog Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. SMARTMOS is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © 2015 Freescale Semiconductor, Inc. SG200 Q3 2015, Rev. 8.0 8/2015