Final Product/Process Change Notification Document # : FPCN20626EA Issue Date: 13 April 2015 Title of Change: Final PCN for wire change from gold to copper and part number change. Proposed first ship date: 20 July 2015 Contact information: Contact your local ON Semiconductor Sales Office or < Yasuhiro Igarashi @onsemi.com> Samples: Contact your local ON Semiconductor Sales Office Additional Reliability Data: Contact your local ON Semiconductor Sales Office or < [email protected]>. Type of notification: This is a Final Product/Process Change Notification (FPCN) sent to customers. FPCNs are issued 90 days prior to implementation of the change. ON Semiconductor will consider this change approved unless specific conditions of acceptance are provided in writing within 30 days of receipt of this notice. To do so, contact <[email protected]>. Change Part Identification: Affected products will be identified with new part number (changing suffix to “-W”). PART_ID SCH1330-TL-H SCH1331-S-TL-H SCH1331-TL-H SCH1332-TL-H SCH1337-TL-H SCH1430-TL-H SCH1433-S-TL-H SCH1433-TL-H SCH1436-TL-H SCH1439-TL-H Change category(s): All site(s) not applicable ON Semiconductor site(s) : External Foundry/Subcon site(s): SCH1331-TL-W SCH1332-TL-W SCH1337-TL-W SCH1430-TL-W SCH1433-TL-W SCH1436-TL-W SCH1439-TL-W Manufacturing Site Change/Addition Manufacturing Process Change Material Change Wafer Fab Change Assembly Change Test Change Sites Affected: New Part_ID SCH1330-TL-W Site 1 Product specific change Datasheet/Product Doc change Shipping/Packaging/Marking Other: _______________________ Site 2 ON Shenzhen, China Description and Purpose: This is a Final Process Change Notification to announce for below contents. 1) Changing wire material from gold to copper 2) Changing part number from XXXXXX-TL-H to XXXXXX-TL-W. Reliability Data Summary: Test Steady State Operating Life High Temperature Reverse Bias Temp Humidity Storage Temperature Cycle Pressure Cooker High Temperature Storage Resistance to Soldering heat(Reflow) Solderability TEM001092 Rev. D Conditions Results Tj=150degC 1000 hrs Pass Ta=150degC,VR=max 1000 hrs Pass Ta=85degC, RH=85% 1000 hrs Pass Ta=-55degC to 150degC 30min each 100 cycles Pass 5 Ta=121degC,2.03×10 Pa,100% 50 hrs Pass Ta=150degC 1000 hrs Pass Solder Temp.:260degC±5degC 10s Pass Solder Temp.: 245degC±5degC 5s Pass Page 1 of 2 Final Product/Process Change Notification Document # : FPCN20626EA Issue Date: 13 April 2015 Electrical Characteristic Summary: Electrical characteristics are not impacted. List of Affected Standard Parts: SCH1330-TL-H SCH1331-S-TL-H SCH1331-TL-H SCH1332-TL-H SCH1337-TL-H SCH1430-TL-H SCH1433-S-TL-H SCH1433-TL-H SCH1436-TL-H SCH1439-TL-H TEM001092 Rev. D Page 2 of 2