SCHURTER AG CH-6002 Luzern www.schurter.com PRODUCT CONTENT SHEET UMBRELLA SPECIFICATION DC22 Power Entry Modul SCHURTER part numbers DC22.XXXX.XXX Version DC22 See below See below Composition part Material group Package family Date Average mass [weight-%] *) Sum [%] PA6 19.5 58.0 Pottant PU 37.2 Capacitor PP 1.3 Metallparts Aluminium Al 12.0 Copper 14.3 Iron Fe 2.2 Socket / Switch body Rocker Cover Materials CAS if applicable Nickel Ni 0.1 Tin Sn 0.7 Zine Zn 5.9 Chrome Cr 0.1 Hard gold-plated 0.2 Capacitor Paper / Ceramic 0.1 / 0.6 Choke Ferrite 35.5 6.5 5.8 Sum in total: or: Traces 100 Weight range 67.2 g Part complies with RoHS 2002/95/EC (yes/no): Yes Fluctuation margin N/a Part complies with China RoHS (yes/no): Yes Case sizes**) and weight range N/a *) related to package weight; weight in particular, see corresponding package weight list **) optional Not part of package family N/a SCHURTER AG Werkhofstrasse 8-12 CH-6002 Luzern, Switzerland [email protected] www.schurter.com Company Address E-mail Internet Important remarks: 1) 2) Traces are product parts, substances etc. that are below a percentage of 0.1 % by weight. Higher limits are accepted if the substance or material is legally regulated (see note no. 2). A list of the (legal) “... restrictions on substances ...“ or materials is available at internet address: http://www.eicta.org/content/Default.asp?PageID=211 3) Certified Management ISO 9001 since 1990 Systems ISO 14001 since 1996 SA 8000 since 2004 OHSAS 18001 since 2005 4) 5) Substances, materials etc. with possible harmful effects on human beings and the environment are listed. There are no risks for human beings and to the environment if products are properly used as designated. This shall not apply to risks caused during procedures for disposal etc. All statements herein are based on our present knowledge. If our products are used properly, there are no risks to human beings and/or the environment. This Product Content Sheet has been established according to Umbrella Specs, an initiative of the German Electrical and Electronic Manufacturer’s Association (ZVEI). Reference: „Information on Substances and Materials in Products“, http://www.zvei-be.org/umbrella_specs/ DC22 Power Entry Modul Creation date: 13.05.2005 08:30:01 0104.0180 Created by: Release date: Released by: Notification No. WI 18.05.2007 HOA 18734 Index Page a 1 von 1 Print date: 18/05/2007 09:26:00