L.E.D. 2 1 8 L.E.D. 1 14,72 0,58 0,38 ±0,10 0,01 ±0,00 PCB EDGE LP 13,63 0,54 15,88 0,63 16,66 0,66 3,05 ±0,50 0,12 ±0,02 21,59 0,85 MAX RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 10,89 0,43 MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: Sn matte LED LENS: EPOXY OPERATING TEMPERATURE: 0°C TO 70°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 11,43 ±0,13 0,45 ±0,01 Note 1: Modular Jack with 1000Base-T magnetics, compliant to IEEE 802.3ab standards; optimized for use with voltage driven Gigabit PHY (i.e. VITESSE) Note 2: RoHs compliant Note 3: Compatible to lead-free wave soldering process Note 4: Side ground tab rear of PEG 3.05 mm (R) Note 5: Panel ground flanges both sides, bottom and top (GF5) NO. IDENT. NR. LED 2 LEFT LED 2 LINKS LED 1 RIGHT LED 1 RECHTS LED CODE 203386 GREEN YELLOW L2 203374 GREEN GREEN L3 203527 Orange/Green Orange/Green L9 Tolerances Information: SCHEMATIC NUMBER: M5E03 All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. ±0,2 mm (±0,008 inch) if not specified Scale in mm Designation Subject to modification without prior notice. Drawing will not be updated. MOD-JACK-MJIM 8C10T,1x1,INT.MAG.,LED ALIGNED 203385 www.ERNI.com c 28.06.2013 Index Date 2:1 All Dimensions Class MJIM I (1/2) A3 RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED ELECTRICAL SCHEMATICS 1000 BASE T - M5E03 ELEKTRISCHES DIAGRAMM 1,27 0,05 CABLE TD0+ P2 J1 MX0+ TD0- P3 J2 MX0- TD1+ P4 J3 MX1+ TD1- P5 J6 MX1- TD2+ P6 J4 MX2+ TD2- P7 J5 MX2- TD3+ P8 J7 MX3+ TD3- P9 J8 MX3- 0,64 0,03 2,54 0,10 0,89 0,0 1,60 ± 3 GND P1 ±0,07 7 0,0 0 ±0, ,2 5 1,0 0 ,0 2± 0,0 7 7 0 0 ,0 4± 1 3 5 7 9 2 4 6 8 10 X2 0 6 ±0,0 0 ±0, 0 ,1 3 0,0 X10 0 4 ±0,0 8,89 0,35 Ohm X2 0 X4 13 14 11 12 8,18 0,32 2,54 0,10 4X 75 3,05 0,12 4X 0.01 µF 4,06 0,16 PCB 11,43 0,45 1000pF/2KV 13,26 0,52 CHASSIS GND P10 15,49 0,61 LED SPECIFICATIONS DESIGNED FOR IEEE802.3ab GIGABIT APPLICATION OPTIMIZED FOR VOLTAGE DRIVEN OUTPUTS MAGNETICS SPECIFICATIONS @ 25°C TURNS RATIO: 1CT:1CT ±3% COLOR FARBE Vf TYP Vf MAX If mA YELLOW 2.1 2.5 20 11 12 13 14 GREEN 2.2 2.5 20 11 12 13 14 2.05/2.2 2.5 20 11 12 G O 13 14 G O CIRCUIT DIAGRAM SCHALTSKIZZE OCL(100 KHz, 0.1 V, 8 mA) 350 µH MIN INSERTION LOSS: ISOLATION -1.1 dB MAX -18 dB MIN -14 dB MIN -12 dB MIN -10 dB MIN -35 dB TYP -50 dB TYP -40 dB TYP -35 dB TYP 1500 Vrms ORANGE/GREEN Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 1-100 MHz RETURN LOSS: 1-40 MHz 60 MHz 80 MHz 100 MHz CROSSTALK: 1-100 MHz CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz Tolerances Information: ±0,2 mm (±0,008 inch) if not specified All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Scale in mm Designation Subject to modification without prior notice. Drawing will not be updated. MOD-JACK-MJIM 8C10T,1x1,INT.MAG.,LED ALIGNED 203385 www.ERNI.com c 28.06.2013 Index Date 2:1 All Dimensions Class I (2/2) A3