RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 14,89 0,59 0,38 0,01 ±0.10 21,59 0,85 MAX 32,22 ±0,20 1,27 ±0,01 TOP OF PCB LP 59,09 2,33 3 x 13.97 [.550] = (41,91 1,65 ) 8 LED 2 1 8 1 LED 1 8 1 8 13,80 0,54 1 3,05 ±0,50 0,12 ±0,02 13,97 0,55 10,89 0,43 Note 1: Modular Jack with 1000Base-T magnetics, compliant to IEEE 802.3ab standards; optimized for use with voltage driven Gigabit PHY (i.e. VITESSE) Note 2: Compatible to lead-free wave soldering process Note 3: Rear shield tabs between each port (T) Note 4: Side ground tab rear of peg 3,05 mm (R) Note 5: Panel ground flanges both sides, bottom and top (GF5) Note 6: RoHS comliant; print "RC" with date code MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: Sn matte LED LENS: EPOXY OPERATING TEMPERATURE: 0°C TO 70°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 53,34 ±0,13 2,10 ±0,01 NO. IDENT. NR. LED 2 LEFT LED 2 LINKS LED 1 RIGHT LED 1 RECHTS LED CODE 203396 GREEN GREEN L3 Tolerances Information: ±0,2 mm (±0,008 inch) if not specified Scale 2:1 All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD-JACK-MJIM 8C10T,1x4,INT.MAG.,LED ALIGNED 203396 www.ERNI.com a 01.09.2010 Index Date Class MJIM I (1/2) A3 RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENER FUER LEITERPLATTE - BESTUCKUNGSSEITE ALL TOLERANCES ±0.05 [.002] UNLESS NOTED 52,07 2,05 ELECTRICAL SCHEMATICS 1000 BASE T - M5E03 40,64 1,60 39,370 1,55 38,10 1,50 ELEKTRISCHES DIAGRAMM CABLE TD0- P3 J2 MX0- TD1+ P4 J3 MX1+ TD1- P5 J6 MX1- TD2+ P6 J4 MX2+ TD2- P7 J5 MX2- TD3+ P8 J7 MX3+ TD3- P9 J8 MX3- GND P1 CHASSIS GND P10 1000pF/2KV 26,67 1,05 25,400 1,00 24,13 0,95 12,70 0,50 1,27 0,05 2,54 0,10 11,430 0,45 9 0,8 10,16 0,40 1 3 5 2 7 4 9 6 8 1 3 5 2 10 7 4 9 6 1 8 3 10 5 2 4 7 9 6 8 1 10 3 5 7 9 2 4 6 8 0 X4 4 0,0 0 1,6 6 0,0 X5 10 2,54 0,10 11 12 3 0,1 13 14 13 14 11 12 X2 13 14 11 12 11 12 13 14 5 3,2 X16 4 0,0 2 2,73 0,11 1,0 0,76 0,03 4,06 0,16 J1 MX0+ 2,29 0,09 TD0+ P2 2,54 0,10 Ohm 8,89 0,35 4X 75 10,16 0,40 4X 0.01 µF 3,05 0,12 PCB 2,73 0,11 9,65 0,38 13,21 0,52 23,62 0,93 27,18 1,07 37,59 1,48 41,15 1,62 DESIGNED FOR IEEE802.3ab GIGABIT APPLICATION 51,56 2,03 OPTIMIZED FOR VOLTAGE DRIVEN OUTPUTS 53,34 2,10 MAGNETICS SPECIFICATIONS @ 25°C TURNS RATIO: LED SPECIFICATIONS 1CT:1CT ±3% LED ANWEISUNG OCL(100 KHz, 0.1 V, 8 mA) 350 µH MIN INSERTION LOSS: ISOLATION -1.1 dB MAX -18 dB MIN -14 dB MIN -12 dB MIN -10 dB MIN -35 dB TYP -50 dB TYP -40 dB TYP -35 dB TYP 1500 Vrms Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 1-100 MHz RETURN LOSS: 1-40 MHz 60 MHz 80 MHz 100 MHz CROSSTALK: 1-100 MHz CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz COLOR FARBE Vf Vf If TYP MAX mA GREEN 2.2 2.5 10 Tolerances Dimension Nr. Scale ±0,2 mm (±0,008 inch) if not specified All Dimensions in mm Date Name Drawn 25.08.2010 Krammer Checked 01.09.2010 Approved 0334-10 01.09.2010 Index Modification Nr. Date Krammer Krammer Name 11 12 13 14 Tool-No.: Material Designation MOD-JACK-MJIM 8C10T, 1x4, INT, MAG., LED ALIGNED 203396 Electronics GmbH a 2:1 CIRCUIT DIAGRAM SCHALTSKIZZE D-73099 ADELBERG Class MJIM (2/2) A3