21,59 0,850 MAX 31,12 1,225 8 1 8 from 3,20 ±0,30 0,126 ±0,012 25,40 ±0,13 1,000 ±0,005 RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENES LEITERPLATTEN-LAYOUT - BESTÜCKUNGSSEITE ALL TOLERANCES ±0.05 UNLESS NOTED 10,89 0,429 to 3,05 ±0,50 [0,120 ±0,020] 1 13,80 0,543 13,97 0,550 10,16 0,400 1,60 ±0,07 0,063 ±0,003 x 3 8 1 2,73 0,107 1 25,40 1,000 HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK TERMINAL FINISH: Sn MATTE MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE: 30 MILLIOHMS MAX OPERATING TERMPERATURE: 0°C TO 70°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACT FINISH: Au, 0.8µm [30µin], OVER Ni 2,73 0,107 NOTE 1: ONE REAR SHIELD TAB CENTERED NOTE 2: PANEL GROUND FLANGES BOTH SIDES, TOP AND BOTTOM (GF5) NOTE 3: SIDE SHIELD TABS IN FRONT 3.68mm (F2) NOTE 4: RoHS COMPLIANT; PRINT "RC" WITH DATE CODE MATERIALS AND FINISH CONTACTS: PHOSPHOR BRONZE 8 10,16 0,400 3,25 ±0,07 0,128 ±0,003 1,27 0,050 3,68 0,145 0,89 ±0,07 0,035 ±0,003 2,54 0,100 8,89 0,350 12,70 0,500 2,54 0,100 24,13 0,950 Information: SCHEMATIC NUMBER: M2A01 Tolerances Scale 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C8T, 1x2, INTEGRATED MAGNETICS 203153 www.ERNI.com C 30.10.2006 Index Date Class MJIM I (1/2) A3 0,38 ±0,10 0,015 ±0,004 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 14,89 0,586 32,22 ±0,20 1,269 ±0,008 TOP OF PCB LP ELECTRICAL SCHEMATICS 10 BASE T - M2A01 ELEKTRISCHES DIAGRAMM PCB CABLE 1:1 TD+ P1 CT P4 TD- P2 J2 TX- RD+ P3 J3 RX+ CT P5 RD- P6 N/C P8 J1 TX+ J6 RX- TURNS RATIO P1-P2:J1-J2 P3-P6:J3-J6 OCL (100 KHz, 0.1 Vrms) P1-P2, P3-P6 DCR P1-P2, P3-P6 RETURN LOSS 5-10 MHz CROSSTALK 0.1-10 MHz CMR 0.1-10 MHz ISOLATION 1CT: 1 ±3% 1CT: 1 ±3% 100 µH TYP 0.9 W MAX -15 dB MIN -40 dB MIN -40 dB MIN 1500 Vrms Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. MAGNETICS SPECIFICATIONS AT 25° C Information: Tolerances Scale 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To insure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK - MJIM 8C8T, 1x2, INTEGRATED MAGNETICS 203153 www.ERNI.com Class MJIM I (2/2) A3