5 4 7 6 1 8 3 2 5 4 7 6 32,22 ±0,20 1,269 ±0,008 14,89 0,586 3 2 21,59 0,850 MAX 1 0,38 ±0,10 0,015 ±0,004 RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT TOP OF PCB LP 8 31,12 1,225 8 LED 2 1 LED 1 8 13,80 0,54 1 3,05 ±0,50 0,12 ±0,020 13,97 0,550 10,89 0,429 NOTE 1: ONE REAR SHIELD TAB CENTERED NOTE 2: SIDE GROUND TAB REAR OF PEG 3.05 mm (R) NOTE 3: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: Sn MATTE LED LENS: EPOXY OPERATING TEMPERATURE: -40°C TO +85°C Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 25,40 ±0,13 1,000 ±0,005 NO. IDENT.NR. LED 2 LEFT LED 2 LINKS LED 1 RECHTS LED 1 RECHTS 203544 GREEN YELLOW L2 203407 GREEN GREEN L3 Tolerances Information: SCHEMATIC NUMBER: H3D01 All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. ±0,2 mm (±0,008 inch) if not specified Scale 08.03.2016 Index Date 2:1 All Dimensions in mm [in] Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK MJIM 8C10T,1x2,INT,MAG.,LED ALIGNED 203545 www.ERNI.com a LED CODE Class MJ I (1/2) A3 RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW EMPFOHLENES LEITERPLATTEN-LAYOUT - BESTÜCKUNGSSEITE ALL TOLERANCES ±0.05 UNLESS NOTED 25,40 1,000 J3 J6 P6 N/C P7 1,27 0,050 2,73 0,107 1,60 ±0,07 0,063 ±0,003 x 3 3,25 ±0,07 0,128 ±0,003 x 2 2 1 4 6 3 8 5 2 7 1 1,02 ±0,07 0,040 ±0,003 x 8 J4,5 J7,8 GND P8 1000pF/2KV 4X 75 4 6 3 5 8 10,16 0,400 P3 CT P5 3,05 0,120 J2 10,16 0,40 0,89 ±0,07 0,035 ±0,003 x 16 8,89 0,350 J1 P1 CT P4 P2 2,54 0,100 12,70 0,500 2,54 0,10 CABLE 7 9 10 11 9 10 11 12 12 2,73 0,107 2,54 0,100 4,06 0,160 PCB 2,29 0,090 ELECTRICAL SCHEMATIC - 10/100 BASE TX - H3D01 EXTENDED TEMPERATURE RANGE ELEKTRISCHES DIAGRAMM 0,76 0,030 9,65 0,380 13,21 0,520 23,62 0,930 MAGNETICS SPECIFICATIONS @ 25°C AUTO MDIX COMPATIBLE TURNS RATIO: 1CT:1CT ±3% (P1-P2 : J1-J2) 1CT :1CT ±3% (P3-P6 : J3-J6) 1CT : 1CT ±3% OCL(100 KHz, 0.1 V, 8 mA) (P1-P2 : P3-P6 350 µH MIN DCR (P1-P2, P3-P6 1.1 Ohms MAX INSERTION LOSS: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz ISOLATION -50 dB TYP -40 dB TYP -35 dB TYP 1500 Vrms Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 0.1 MHz-100 MHz -1.1 dB MAX RETURN LOSS: 0.5 MHz-30 MHz -18 dB MIN 40 MHz -15.5 dB MIN 50 MHz -13.6 dB MIN 60 MHz-80 MHz -12 dB MIN CROSSTALK: (0.1 MHz-100MHz -40 dB TYP COMMON MODE REJECTION LED SPECIFICATIONS LED ANWEISUNG COLOR FARBE Vf TYP Vf MAX l mA YELLOW 2.1 2.5 20 9 10 11 12 GREEN 2.2 2.5 10 9 10 11 12 Scale Tolerances Information: ±0,2 mm (±0,008 inch) if not specified CIRCUIT DIAGRAM SCHALTSKIZZEB1 2:1 All Dimensions in mm [in] All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. MOD JACK MJIM 8C10T,1x2,INT.MAG.,LED ALIGNED 203545 www.ERNI.com a 08.03.2016 Index Date Class MJ I(2/2) A3